increase buffer size

Hi all

I am currently taking 6 pressure measurements, convert and then send HAVE up to 6 current AO, so I'll have continuous samples for each channel. I got error 200609, which wants to increase the size of buffer when buffer selected size: 1 and Minimum required Buffer Size: 2.

I tried to correct this error by adding the output buffer configures and adding the constant 2, then it gives me error 200524, saying:

Scripture cannot be performed because the number of data channels does not match number of channels in the task.

When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

Number of channels of task: 1
Number of data channels : 2

I was stuck for a few days, now try what is recommended in the forums... what should I do to get this program to work? Fastener is the program. I just started to work with Labview a few weeks, so I'm a beginner.

Any help is greatly appreciated!

Try to remove the sample VI on the task of output clock and write NChan 1Sample inside your loop to update outputs.

Tags: NI Software

Similar Questions

  • How to increase the size of the buffer veristand UDP?

    Hello!

    I'll have some lost data of veristand screen and I want to increase the size of the UDP buffer. This is a new option in veristand 2011 that I can read on this link: http://zone.ni.com/reference/en-XX/help/372846C-01/veristand/whats_new/ (improving the workspace section).

    Someone at - it now haow to do?

    Thanks in advance,

    Miguel.

    Do you mean how to do it from the VeriStand workspace? On your graphical work space click on setup to enter the chart configuration dialog box. In the configuration dialog box, you will see where you can enter a new value for the UDP buffer size.

  • How to increase the size of the buffer

    Hi, I would like to ask how can I increase the size of the buffer?

    My problem is that the generation cannot be started,

    because the buffer size is too small by the way I use DAQ Assistant.

    Choose the size of the buffer: 1

    Minimum required buffer size: 2

    so, how do I solve it?

    Thank you

    Chris

    Hello Chris, can I ask what material you use. Currently the DAQ Assistant in your code example is configured to run continuous Acquisition and thus expects a type of dynamic data. This can be seen by the small red spot known as a point of stress and is shown when LabVIEW must convert the data to a different type. There are two options you can try to solve this problem.

    (1) change the type of Acquisition "(on request) 1 sample" in the DAQ Assistant, he will write your input value for the cDAQ with each iteration of the while loop

    (2) change of data entry strikes at a waveform

    Here are some articles that you might find useful http://zone.ni.com/devzone/cda/tut/p/id/5438

    Hope this is useful

    Philippe

  • How can I increase the buffer size of the StationID variable

    I'm reading the variable string StationID in TestStand, which holds the name of the computer. Currently, it truncates to 14 characters.

    How can I increase the size?

    Thanks in advance.

    Hi WDLV,

    What version of TestStand do you use?  I tried this in 3.5, 4.0 and 4.2 and verified that the StationID (RunState.Root.Locals.StationInfo.StationID) was able to contain a name more than 14 characters.  You use this method to access the stationID, or something else?  Also, you see this with any order, or just an individual?

  • buffer size and sync with the cDAQ 9188 problems and Visual Basic

    Hi all, I have a cDAQ-9188 with 9235 for quarter bridge straing caliber acquisition module.

    I would appreciate help to understand how synchronization and buffer.

    I do not use LabView: I'm developing in Visual Basic, Visual Studio 2010.

    I developed my app of the NI AcqStrainSample example. What I found in the order is:

    -CreateStrainGageChannel

    -ConfigureSampleClock

    -create an AnalogMultiChannelReader

    and

    -Start the task

    There is a timer in the VB application, once the task begun, that triggers the playback feature. This function uses:

    -AnalogMultiChannelReader.ReadWaveform (- 1).

    I have no problem with CreateStrainGageChannel, I put 8 channels and other settings.

    Regarding the ConfigureSampleClock, I have some doubts. I want a continuous acquisition, then I put the internal rate, signal source 1000, continuous sample mode, I set the size buffer using the parameter "sampled by channel.

    What I wonder is:

    (1) can I put any kind of buffer size? That the limited hardware of the module (9235) or DAQ (9188)?

    (2) can I read the buffer, let's say, once per second and read all samples stored in it?

    (3) do I have to implement my own buffer for playback of data acquisition, or it is not necessary?

    (4) because I don't want to lose packets: y at - it a timestamp index or a package, I can use to check for this?

    Thank you very much for the help

    Hi Roberto-

    I will address each of your questions:

    (1) can I put any kind of buffer size? That the limited hardware of the module (9235) or DAQ (9188)?

    The samplesPerChannel parameter has different features according to the synchronization mode, you choose.  If you choose finished samples the parameter samplesPerChannel determines how many sample clocks to generate and also determines the exact size to use.  But if you use streaming samples, the samplesPerChannel and speed settings are used together to determine the size of the buffer, according to this excerpt from the reference help C DAQmx:

    Note that this buffer is a buffer software host-side.  There can be no impact on the material available on the cDAQ-9188 or NI 9235 buffers.  These devices each have relatively small equipment pads and their firmware and the Driver NOR-DAQmx driver software transfer data device to automatically host and the most effective way possible.  The buffer on the host side then holds the data until you call DAQmx Read or otherwise the input stream of service.

    (2) can I read the buffer, let's say, once per second and read all samples stored in it?

    Yes.  You would achieve this by choosing a DAQmx Read size equal to the inverse of the sampling frequency (during 1 second data) or a multiple of that of the other playback times.

    (3) do I have to implement my own buffer for playback of data acquisition, or it is not necessary?

    No, you should not need to implement your own stamp.  The DAQmx buffer on the host side will contain the data until you call the DAQmx Read function.  If you want to read from this buffer less frequently you should consider increasing its size to avoid the overflow of this buffer.  Which brings me to your next question...

    (4) because I don't want to lose packets: y at - it a timestamp index or a package, I can use to check for this?

    DAQmx will meet you if all packets are lost.  The default behavior is to stop the flow of data and present an error if the buffer of the side host DAQmx overflows (if, for example, your application does not pick up samples of this buffer at a rate equal or faster than they are acquired, on average).

    If, for any reason, you want to let DAQmx to ignore the conditions of saturation (perhaps, for example, if you want to sample continuously at a high rate but want only interested in retrieving the most recent subset of samples), you can use the DAQmxSetReadOverWrite property and set it to DAQmx_Val_OverwriteUnreadSamps.

    I hope this helps.

  • UDP receive default buffer size

    Hello

    I have a question about receiving data via UDP:

    Description of the problem:

    An application of part 3 is extract to a PACS + 2400 Hz measurement data.

    All samples are then sent to a UDP port locally.

    I then use a labview application to read the data and perform a treatment.

    The question is, at 2400 Hz I loose a lot of UDP packets because of receive buffer overflow, i.e. new data appear before all the old data is read.

    It's BI data ' in irregular bursts, 10 - 20 times every second.

    I tried increasying the Protocol UDP receive buffer according to this size:

    http://digital.NI.com/public.nsf/allkb/D5AC7E8AE545322D8625730100604F2D

    And it seems to fix the problem.

    But here is another question:

    If I change the size of the UDP buffer during execution of the application of the 3rd part, the 3rd team application will crash.

    So my question is:

    Is it possible to change the value default UDP receive buffer size in windows?

    Such that when the UDP connection is open, it will have a buffer size of 32768 for example, regardless of which application that accesses the UDP connection first?

    Y at - he got another code inside your task of reading as a ms of waiting? Is the task of reading as lean and mean as possible? When you increase the size of the buffer?

    I found this registry key. It may be worth a try. The post was old, it cannot apply to Win7.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Afd\Parameters \DefaultReceiveWindow (REG_DWORD) = 16384 (decimal)

  • Where is iTunes (12.4) "continuous buffer size?

    You want to find a lot of examples, even some here on apple.com, for older versions. These explain the options 'size of the streaming buffer' can be found in "iTunes > Preferences [Advanced]". " I don't see this in iTunes 12.4. I am listening to a stream of events, but he continues to stamp and finally _turning ignore. And when I press play again, it reconnects immediately.

    Where is iTunes (12.4) "continuous buffer size?

    11 buffer size settings iTunes.

  • How can I increase the size of my Inbox (Mozilla Thunderbird)?

    I get the following: "the Inbox is full and cannot hold messages more. To make room for more messages, delete any old or unwanted mail and compact the folder. »

    I followed the thread on the forum, but still have no answer. I want to just increase the size of the Inbox on my desk. This should be simple!

    Help, please.

    No, it's not simple.
    Create another folder, move some mail on it and make room and compact in the file menu that Thunderbird always has a 4 GB limit on mail to be held in a local folder. IMAP account apparently can be greater. POP cannot.

  • How to increase the size of the fonts in the Inbox subject, From, Date, etc.

    About the image below, I don't see a way in the settings to increase the sizes of police in this area.

    I wrote about this here: http://xenos-email-notes.simplesite.com/417754775

    Try the add-on says. An alternative is to do it via a userChrome.css file if you have a strong aversion to the modules.

  • I use a 43 in. TV as monitor and have trouble reading the text in the drop-down menu (file, editing, display etc.) boxes. Is it possible to increase the size?

    I downloaded the theme and font size changer, but I cannot increase the size of the text in the drop-down menus. I sit 10 ft away from the TV with a wireless keyboard. Even when I Zoom on the page of the menu drop-down does not increase in size. With the help of a mini Mac OSX 10.3

    I think that the solution is a TV 60 ", but I hope we can find a more affordable solution!

    I think that the menu bar on Mac OS X.

    [Apple] Window helps the Firefox Edit View History bookmarks file tool

    -wouldn't be likely changes via an add-on or a parameter of Firefox.

    However, as a Windows user, I am at a disadvantage by experimenting.

    I've seen a number of discussions on the forums of Apple, without a clear solution:

  • I want to increase the size of the history panel

    I just upgraded to v. v. 34 17.0.1. In the old version, I could open the story as a full panel and see the places and dates in chronological order. Now, even if I have the "View > by date and site" option is selected, I can only see sites. Also, when I try to increase the size of the Group story to pause the cursor on the edge, the two-headed arrow icon does nothing.

    There is a minimum (min-width: 14em ;) and maximum (max-width: 36em ;) for the sidebar and you can not drag icon resizer beyond this limit.))

    Add code to the file userChrome.css below default @namespace.

    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */

#sidebar { min-width:0px !important; max-width:none !important; }

    The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

    • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
    • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
    • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
    • Paste the code in the userChrome.css file in the Editor window
    • Make sure that the userChrome.css file starts with the default @namespace line
    • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
      Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

  • Is it possible to increase the size of the drop-down items, including the size of the police?

    With my failure view I would like to increase the size of the things at the top of firefox. Note that I speak not of content of web pages.

    Thus, for example the size and police Betty bar, size and even once the font size of the title, tabs, status bar.

    I searched items and that you can find content on web pages

    You can watch this extension to adjust the font size for the user interface.

    You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • How to increase the size of the menu bar?

    My bar menu and all the buttons at the top suddenly, all are much smaller. Any ideas on how to increase the size of the top of the screen? IM talking not about the size of Web pages, just the menus up to the top.

    Don't want to use the menu bar and not the Firefox menu button?

    See also:

    You had previously placed all the items in the Menu bar?

    You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

    See also:

    An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

    You can watch this extension to adjust the font size for the UI (toolbar).

    You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • How to increase the size (footprint) of the banner?

    I would like to increase the size of the banner of the article at the top of the page so that I can see other links I visit regularly.

    Try using this extension:

    https://addons.Mozilla.org/en-us/Firefox/addon/Multirow-Bookmarks-toolbarplus/?src=SS

  • HP - 50g RPN - how to increase the size of the variable icon in the command screen in the RPN

    Greetings.

    How can I increase the size of the icons 'F' keys for variables in the RPN command line window?

    My reason for this is to be able to see the full name of the variable.

    Thank you.

    Edit: Perhaps sizes of keys to function 'F' is what determines the size of the variable icon. Does this mean that it cannot be increased?

    If you press SHIFT RIGHT and then press the ARROW KEY down, you can see more than 5 characters that are currently displayed for the softkey text.

    a second solution to think abou... to help the CSE function and custom designed GROBs.

    (However, take into account the current size of the police... how small it really is possible and stay legible-

    You must take account of the resolution of the screen of 50 G... it's not a 'Tablet' hi-res-like display)

    See the example on page 20-4 of the 50G users guide.

    a copy of the user guide can be downloaded here:

    http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportManual & lang = to & CC = US & docIndexId = 64179 & TaskID = 120 & prodTypeId = 215348 & prodSeriesId = 3235173

    Here is the example used on page 20-4

    % HP: T (3) A (R) F (.);
    { {
    21 8 00000EF908FFF900FFF9B3FFF9A2FFF9A3FFF9A0FFF388FF GROB
    "hp"}}

    the list above on the battery... run

    MENU

    If you try to increase the amount of visible characters when running programs, you can use INFORMATION or an application like GUIPLUS located here:

    http://www.HPCalc.org/search.php?query=guiplus

Maybe you are looking for