increase the volume creates high reverberation as pitch

increase the volume creates reverberation as high tone sound, what happened all of a sudden andnothing I actually disappear unless I lower the volume. Windows Vista acer aspire 3680, no problem in three years of use.

Restore point:

http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

Do Safe Mode system restore, if it is impossible to do in Normal Mode.

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

http://www.windowsvistauserguide.com/system_restore.htm

Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

Then:

Go to the Web site of the manufacturer of your computer laptop/computer/Sound card > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • How can I increase the volume until recently recorded dvd is stronger

    the output volume is too low on recorded dvd, maximum volume during playback is too weak, I am trying to increase the volume of the recently ripped DVD. I drag and drop movies that I want to burn on windows media player, the new dvd has the same sound but I want the copy for an increase in volume, the maximum pyayback on media player is too low.

    Hello

    Thanks for giving an opportunity to help you with your concern for Windows to Microsoft Community!

    1. How do you try to create the DVD's? What application are you using?

    2. the problem occurs with all recorded DVD?

    3. sound is works well when you read original DVD?

    4. what application you use to read recorded DVD?

    You can check the following links as reference:

    Burn a CD or DVD in Windows Explorer

    http://Windows.Microsoft.com/en-in/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

    Burn your own custom CDs

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

    Respond with more information so that we can better help you.

    If you need help on Windows please keep us informed.

    We will be happy to help you!

  • How increase the volume quite simply, please?

    Hello

    I have some difficulty increase/decrease the audio volume of two clips I have.

    The audio level of a clip is too low, while the other is deafening.

    I scanned the Internet for informed on this and they suggest that I introduce keyframes (not my strong point). I am aware that if I click on the audio from a clip and go to "Adjust" in the upper right corner of the premier elements 11 I can see 'Volume', but when I type in x amount of decibels, it makes no difference to the volume--either higher or lower.

    There is no simple way to choose an audio track and increase the volume of the entire track by, say, y amount of decibels before saving your project? I would then click on the audio track strong and decrease the volume of the track, then save again?

    Basically, I'm trying to equalize the audio output volume so that if you watch the clip on a DVD TV player, you fail constantly for the remote control to adjust and readjust the volume.

    Thank you very much.

    Steve

    Hi Steve,.

    Thanks for posting on the Adobe forums.

    Please try to work with the yellow Volume on the audio bar to get an optimal output for your track.

    Let me know if it works.

    Kind regards

    Sandeep

  • may not increase the volume of output in the Blue-Ray PP project

    Hello world

    strange problem:

    I did a project PP with different audio tracks:

    (1) stereo 48 KHz of underwater video camera

    (2) stereo mp3 background music

    (3) Italian stereo mp3 comments

    (4) stereo mp3 English comments

    AC3 5) 5.1 another video camera

    Of course, each file is defined differently as a volume (files of songs were initially different volume) and everything played OK.

    But when I out my final dolby 5.1 file, it has a very high volume.

    Tried to increase the volume of each file, tried nesting each track can change in volume gain, but the output files every time the same volume.

    I can hear the volume change, he plays in the project, but, when I output dolby ac3 file, there every time the same volume.

    Any idea?

    Thank you

    Giorgio

    From CS4, the default sequence is to the title sequence and the setting can be overridden when you make a sequence > New. In earlier versions, it was within the parameters of the project, but has been moved. When you make a sequence > New, you can choose the Audio track of master.

    Good luck

    Hunt

    PS - I would do a screen-cap, but don't have CS4, so I would only complicate things.

  • If I increase the volume his watch that the volume headphones but I am not connected to the headphones

    If I increase the volume on-screen display this volume headphones but am not connected to the headphones because of this I am unable to hear the caller's voice, how can I solve this problem

    The iPhone thinks there are headphones connected - you probably need to clean your helmet at the bottom of the iPhone.  There are many tips about this on Youtube.

    Clean using compressed air, q - Tip with most of the fuzz removed - do not use metal you can short-circuit the contacts in the port.

    Reboot your phone by pressing on ON / Off switch and also by pressing the Home button until you see the Apple logo reappear.

  • Satellite L300 - I can't increase the volume for low battery

    Hello dear users of Toshiba

    My English is not very good.
    I have a laptop Toshiba Satellite L300
    My problem is that I can not increase the volume to a low battery

    Is there anyone who knows how can I fix it?

    thanx
    A.MARK

    Hello

    I think you want to turn on sound notification when the battery is empty.
    Is this good?

    Well, you can do it in Vista power settings
    I guess you are using the Vista operating system and therefore this battery notification can be enabled in Vista power settings.

    Please check this doc from Toshiba.
    + How to manage Windows Vista power management features.
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

    You will find the settings in the farm. It s called the low battery level

    Check it out.

  • Satellite A200 does not correctly reduce or increase the volume

    Hello

    Our Satellite A200 is having problems with its Volume control wheel.
    If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
    He jumps rather the volume level in seemingly random directions (with a preference for the volume).
    Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

    BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

    -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
    -Which driver/firmware is attached to the order of the volume control?
    -How can I determine if this is a hardware or software problem?

    Advice would be welcome.

    Stephan

    Hello

    There is no software or hardware problem.
    It is a new generation of volume control.

    First of all there is no mechanical limit turning right or left.
    In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

    By the way;
    > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
    You can change the volume as in the sound settings that could be found in the control panel.
    > Which driver/firmware is attached to the order of the volume control?
    Audio driver controls the volume controller.
    > How can I determine if this is a hardware or software problem?
    There is no problem

  • Increase the volume of the files to burn to CD?

    I have an mp3 file that I need to burn it to a CD using Media Player, but there was a problem with the recording level and who speaks can hardly be heard with the completely mounted volume on my speakers and multimedia player.  It of better when I play with the SRS WOW effects, but is it possible to add these effects or to increase the volume of this file, when I burn it to the CD is strongest when played?

    CatherineS

    No, Audacity is definitely the way forward as its a million times better than WMP audio editing. Work a little more maybe, but well worth it.

    You can add effects with Audacity, VST and other.

    In WMP you can normalize the volume when burning (Options > burn > you will see the option on this tab).

    Personally I would not trust him, I use Goldwave and sometimes daring.

    See you soon,.

    Jerry

  • The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

    The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

    Hello

    Control Panel - SOUNDS - Audio peripheral devices configuration-manager

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
    the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
    Just make sure that the version you have installed appears in the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
    and show disabled devices - check your micro - highlight them, then lower right properties. Do
    of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
    and APPLY / OK changes.

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • How to increase the volume on a DVD, play using Windows Media Player?

    Original title: speak low volume problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: How can I increase volume on a dvd in windows media player?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi onesigvector,

    Try the following steps to increase the volume on Windows Media Player for playback of the DVD.
    Step 1: Change volume settings in Windows Media Player
    a. see change volume in Windows Media Player settings

    Step 2: Set the mixer for the player
    a. open Windows Media Player.
    b. click the present volume on the taskbar icon.
    c. click Mixer, under Applications, move the volume for Windows Media Player.
    d. close the volume mixer window and check the result.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I increase the volume for youtube videos?

    Volume problems

    How can I increase the volume of videos youtube - control panel shows me that my volueme is still 100% can hardly hear youtube videos.

    Hover your mouse over the video, and then point the mouse pointer on the volume icon on the floating toolbar that appears, make slide the volume knob to the right to increase the volume.

    Another thing to try if you still hear no sound, click on the volume icon in the Notification area of the Windows taskbar, click mix and watch if the mixer volume for Youtube is turned upward.

  • How o I increase the volume for headphones.

    Original title: how to increase the wav in windows 7

    I bought a headset and they were of low volume, but I tried on my dads windows xp there was the bar of wav and I increased it and it was fixed on xp but where can I find the wav bar in windows 7 windows 7 y at - it software to do?

    Hello

    This problem only occurs when using headphones?

    You can follow the suggestions and check out them.

    Method 1

    a. right click on the notification area, the volume icon.

    b. click Open Volume Mixer and increase the volume for the headphones.

     

    Method 2

    a. right click on the volume icon in the notification area.

    b. go to playback devices and click with the right button on helmet under playback.

    c. go to properties and set the volume to maximum on the levels tab.

    d. click on apply and OK.

  • How to increase the volume of 100% on Windows RT

    don't know how it should sound volume to 100% but it seems small to those who listen

    OT:volume

    Hi John,.

    From your problem description, I understand you want to know how to increase the volume to 100%. Please let me know if you do not experience this problem.
    I suggest you try the following steps to ensure that the sound is set to 100%.

    a. press the speaker on the bottom right.
    b. move the slider to 100%


    Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.
  • Increased storage, but can not increase the volume?

    Having a single ESXi 5 host with local storage.  Adding additional disks to the array and the logical volume.

    The extra space appears on the properties of the data store in the measuring device, but when I try to increase the volume of the data store that nothing shows develop?

    ScreenShot078.jpg

    you try to increase local storage... Check this http://devbios.wordpress.com/2012/04/21/esxi-5-expanding-datastore-by-extending-local-array/

  • Increase the volume for the data store

    Hello

    Someone recognizes this problem?

    When you try to increase a volume of data store in vSphere4 we get the following message: "error during the configuration of the host. Failed to get the disk partition information.

    We use a MSA2324 of HP storage as a storage (data store) to our servers of vSphere. I increased the volume of the utility interface HP Storage manager 1.5 TB to 2.2 TB. So far so good. But when I try to increase the datastore in vSphere, this error message occurs.

    I've done this before, but now it doesn't seem to work. We have 25 active servers attached to this data store. I REALLY want to increase this volume online. It will probably work if I stop all virtual servers, restart the server VSphere and then increase the volume.

    Concerning

    Magnus

    Maximum supported LUN size is 2 TB minus 512 b.

    ---

    VCP MCSA, MCTS Hyper-V, VMware vExpert 2009, 3/4

    http://blog.vadmin.ru

Maybe you are looking for

  • 12.4: compilations don't show selections for the album

    is there a setting hidden somewhere? It is compatible with more than one list of reading for me. but, if I go to the playlist in albums, no compilations then appear. If I try to add these compilations, I get a message saying that they are already the

  • How can I backup my data?

    Because I had the wrong continues with my desktop and the taskbar, due to problem of Control Panel, I'm thinking of dumping vista to 7.  However, I do not trust myself not to lose my personal information and files. Any advice? Hopegeorgia

  • My computer will not install any software!

    When I try to install new software. the Setup program starts and says that it is installed the program, but so he's here until the message appears saying that the installer no longer. I guess something is interfering with the process, how can I know

  • BlackBerry Smartphones connect a PC to the media BB via the Wifi card.

    Hi all I used to be able to access/Explorer my files from card multimedia of Sony Ericsson via my PC windows Explorer. This was done via a Wifi connection. I would like to do this with my BB8900, so it saves me using the cable, which allows me to tra

  • Change the color of the report item (apex 5)

    I have a tin of normal report 5 Apex.There is a simple way to change, red, a value of an itame to the reportIf the value is < 0?> thank you very much...