Increases in percentage of volume Y50-70

Similar Questions

• Dear all, can __How I increase and expand the volume of my hard 22nd of the available capacity at the (:)) d hard drive)

  Dear all,

  How can I increase and expand the volume of my hard capacity available to the (d) 22nd

  Hard drive

  You can't take a little D: and nail it on C:

  You delete D: > and then extend C: into the now unallocated space that will become D:.

  Save all data on D:, as it will be lost.

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  How to remove and extend a Partition with Vista disk management

  See you soon.

  Mick Murphy - Microsoft partner

• When I record Captivate automatically increases my level 100 volume

  Hello

  I'm doing a Powerpoint presentation where I need to record an audio for each slide. Whenever I have the record button, Captivate increase my level 100 volume automatically. For the moment, I save and readjust the level while recording and then use the editing tools in Captivate to cut the "reajdusting process". However, this takes too long and is very tedious. I know others have had this problem before. No there is no way to solve this problem?

  In fact I did everything the side Windows of the things like unchekcing 'allow applications to take exclusive control of this device.

  Calibrate you the microphone with Captivate? It would be useful that you mentioned the version you are using. No audio record in PPT, but in Captivate, please.

• Increasing the percentage width via ActionScript component?

  Hello

  I made a Custom Component of Serach result of the textInput.

  I am building this component dynamically. The condition is that under certain conditions, I want to make its width to 100%.

  I tried this way, but his does not work

  If (viewName is FIELD)
  searchVuiewNode.width=100%;

  
  Please tell me how can I increase width percentage wise dynamicallly?

  Thank you.

  searchVuiewNode.percentWidth = 100;
  

• Adjusting the volume in percentage

  Hi all

  Is it possible that I can manually add the level of desired percentage of volume rather than using the slider handles up and down?

  Sometimes I wish that the volume to be between the two that the volume slider can be set to, say for example he is 240% but want to be 180%.

  For some reason, it won't let me get more accurate or more accurate.

  Also, is 400% the max volume? With dialogue and the general discourse he sometimes is not enough and wants to go beyond 400%, but cannot work out how to do it.

  Thanks in advance!

  What version of iMovie?

• Satellite A200 does not correctly reduce or increase the volume

  Hello

  Our Satellite A200 is having problems with its Volume control wheel.
  If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
  He jumps rather the volume level in seemingly random directions (with a preference for the volume).
  Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

  BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

  -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
  -Which driver/firmware is attached to the order of the volume control?
  -How can I determine if this is a hardware or software problem?

  Advice would be welcome.

  Stephan

  Hello

  There is no software or hardware problem.
  It is a new generation of volume control.

  First of all there is no mechanical limit turning right or left.
  In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

  By the way;
  > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
  You can change the volume as in the sound settings that could be found in the control panel.
  > Which driver/firmware is attached to the order of the volume control?
  Audio driver controls the volume controller.
  > How can I determine if this is a hardware or software problem?
  There is no problem

• No option to trun off clicking on to increase/decrease volume on MediaSmart Panel?

  Does anyone know if there is a way to disable the clicking sound when increasing or decreasing the volume on the MediaSmart Panel?  If so, how?  I couldn't find an option for her.  Thanks in advance.

  I don't know about it, but I think that his is how you disable the sound of rattling in the BIOS.  There is a way.

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• How increase the volume quite simply, please?

  Hello

  I have some difficulty increase/decrease the audio volume of two clips I have.

  The audio level of a clip is too low, while the other is deafening.

  I scanned the Internet for informed on this and they suggest that I introduce keyframes (not my strong point). I am aware that if I click on the audio from a clip and go to "Adjust" in the upper right corner of the premier elements 11 I can see 'Volume', but when I type in x amount of decibels, it makes no difference to the volume--either higher or lower.

  There is no simple way to choose an audio track and increase the volume of the entire track by, say, y amount of decibels before saving your project? I would then click on the audio track strong and decrease the volume of the track, then save again?

  Basically, I'm trying to equalize the audio output volume so that if you watch the clip on a DVD TV player, you fail constantly for the remote control to adjust and readjust the volume.

  Thank you very much.

  Steve

  Hi Steve,.

  Thanks for posting on the Adobe forums.

  Please try to work with the yellow Volume on the audio bar to get an optimal output for your track.

  

  Let me know if it works.

  Kind regards

  Sandeep

• Increase the overall Volume of film

  Hi - I have all audio levels fine for my film, and I want to just increase the overall volume of film. How can I do this? I thought I could use the audio mixer - but I put the top slider - but then it goes down again. I'm new so I don't know how everything works again. Thank you

  Yes, Audio Mixer works best as a monitor of audio mixer level, in my opinion.

  It is designed so that you can control the audio level that you play your movie. But this creates a large number of additional keyframes and can be quite messy.

  The method you use - in the line of scene - is probably the easiest way to increase or decrease the volume of an entire track.

  The best way to resolve the audio for individual items in montage mode is to drag the horizontal line that runs through the clamps upwards or downwards. (There are also more advanced methods, including standardization and keyframes, which I cover in my book.)

  But the key is to watch these counters in the Audio Mixer Panel! You don't want to overload your audio (or underload)!

• Phones ring Volume blackBerry smart - is there an easier way to adjust the volume?

  I just got my phone today and it seems that the only way to change the ring volume is to go through a series of 6 steps (according to the user's guide).

  Change the default volume for calls

  You can increase or decrease the default volume for calls. The percentage of volume is high, the louder.

  1. in the phone, press the Menu key.

  2. click on Options. 3. Click

  General options.

  4. change the default call Volume field.5. Press on the

  Menu key.

  6. click on Save.

  Has anyone found a faster way? I don't want to have to go through these steps each time that I have enter and exit a meeting not to mention the risks involved if I need to adjust the volume while I'm driving.

  I'd appreciate any help available.

  Thank you.

  After you set the default options, the easiest way is to go to the main menu, use the trackball to move up right and highlight the speaker, click on it and choose the setting that you want (that is to say strong, quiet, phone only, etc.)

  It's the fastest way I've found.

  I hope this helps.

• Volume icon appears at random then spend or receive the phone call

  Hello

  Without doubt, I went through all the threads it are on the theme of the volume icon, but have not found anything that fits my 'problem '. I have an iPhone SE and sometimes when I make or receive a phone call the grey volume icon appears on the screen. I attributed it to the apps from third-party such as IMDB or Facebook but tried various scenarios and honestly can't pin it down to a specific. Someone at - it a similar problem? To be honest, it's quite annoying to see the gray icon volume pop up like this out of nowhere. I should add that all is well in terms of volume and the volume keys. No clue as to what causes this problem?

  Peace,

  Wojtek

  How do you know that all is well with the volume keys? They can work properly (increase or decrease in volume when you press on), but there might be a problem with the hardware with them or the mute button.

  Make an appointment on the Apple store and bring the phone to be checked.

  ~ Lyssa

• the volume control on background music

  I finished my first iMovie composed of video clips.  I have two questions:

  How to lower the volume of the background music for a few seconds only

  How to disappear the music of a song before the end of the song.

  Thank you

  Hi, grosen25,

  There are two ways to adjust the volume in the latest version of iMovie (10.1.2).

  One way is to select the audio clip, and then click on the speaker icon in the toolbar at the top of your screen.   This will reveal a scroll bar

  allows you to adjust the volume from 0 to 400%.

  Another way is to first click on the settings button in the right middle of your screen and select 'Show waveforms' in the dialog box that results.  Then select the audio clip.  You will see a horizontal volume control line that runs through the clip.  Place your cursor on the line and move it up or down to increase or decrease the volume.

• the logical volume change question

  Hi all

  I'm a bit rusty...

  On an audio track, I would like to take a little bit of audio in the middle of a track - drag from left to right - pointing out a few bars and when I let go automatic volume benchmarks would start at the end.

  Then, I would just be able to click inside the selection and do increase or decrease the volume for this section.

  I forgot the tools to do this easily

  Can anyone remind me how to do this?

  Hello

  With the automation of volume showing track, use the marquee tool to "slide". Click and drag the volume automation curve to adjust as you describe

  TDC

• Satellite R630 - 11L - low volume speaker internal

  Good day,

  I complained about the low audio volume in toshiba-portege-m800-107, but now after hearing the r630 max volume I feel as if it was a joke... its too low.
  I increased the maximum sound volume adjustment control panel > sound, played with the 3D settings, but nothing much is. Yet, music at the office or by making a Skype call, I'm not comfortable with the level of the volume.

  Is it same with other R630 models shipped in other sites of the world? are you happy with the max volume?

  Hey Buddy,

  I m not the owner of the Satellite R630, but it s a very small and light notebook, so I guess that the speakers are not the best for entertainment, but I think that it s ok because it s a laptop for mobile use and office.

  If you think that the volume is not sufficient, you should check the Windows sound settings and make sure that you use the highest volume.

  Alternative connect external speakers or headphones.