Increment and decrement

I want to do a simulation of increasing numbers and decrements up to a point. Let's say that I start with a constant of 10. I want to increment this 10 until it reaches 50. When he reached 50, I want to decrement, until the return to 10. And from there, it goes back to 50 and so on.

I'm new to LabVIEW, and by looking at a few examples, I can do the part of the increment. However I can only stop the simulation when he reached 50, and it is not I want.

Can someone help me with this?

See attachment.

Tags: NI Software

Similar Questions

  • How to increment and decrement a counter with a single button

    Is there anyway you can increment and decrement a counter using only one button?

    I want this counter in place so that when I leave the stage and go back to it, the visibility of my button will remain the same because of being linked to the meter number.

    What would be the best way to implement that it doesn't work when I do it this way.

    function show_hide_MC(evt:MouseEvent):void {}

    MC.visible =! MC.visible;

    (Counter = 0) = (counter = 1);

    }

    btn.addEventListener (MouseEvent.CLICK, show_hide_MC);

    Thanks in advance!

    You can use a Boolean value (true/false) rather than a meter to keep track / affecting visibility.  You can use the counter simply to determine if you are starting the file or not.   When you click this button, you set the mc.visible property, and then assign the Boolean value of the visible property of the mc.

    var mcVisible:Boolean;    These two variables need to extend the length off the coast of the timeline
    var int count;

    if(Count == 0) {/ / you just started things so set up}
    mcVisible = mc.visible;
    Count += 1;
    } else {}
    MC.visible = mcVisible; you refer then set the visibility of the mc
    }

    function show_hide_MC(evt:MouseEvent):void {}
    MC.visible =! MC.visible; Toggle visibility
    mcVisible = mc.visible;    Remember how you left it
    }

    You can just use the number of establishments, incrementing every time that you click the button and using the module to determine if it has been clicked on an even number of times compared to an odd number of times, and then have a conditional that tests, which affects visibility... something like...

    var int count;           will start with a default value of 0

    We need to increase the length of the timeline

    If (count %2 == 0) {/ / this is the same value}
    MC. Visible = true;
    } else {/ / this is an odd value}
    MC. Visible = false;

    }

    function show_hide_MC(evt:MouseEvent):void {}
    MC.visible =! MC.visible; Toggle visibility
    Count += 1;

    }

  • increment and decrement variable

    Hi guys

    I m new in the Labview programming and I m working with the NXT module in Labview 2010, and I have a few problems, because I m used to programming in C

    LabView is a kind of diferent than C

    The thing is wath I want to do a speed controller using the NXT brick

    Using the left arrow key increases the speed and by using the arrow button to the right the speed will decrease

    I m usin the actuator connected to the PORT has the NXT brick,

    Thank you

    Diego

    There is a communication i2c vi on the NXTI/O: Advanced palette that allows you to read/write the i2c data. You can take a look at the sensor ultrasonic VI, or saw HiTechnic sensors for examples of the use of this vi. You also need to configure the sensor i2c use port. You can use the VI 'Port of sensor installation' also in the palette of the advances to set the port for Lowspeed9V / RawMode

  • Increment and decrement with a Boolean value entered

    Hello Experts Labview (and in fact life savers!)

    I have a digital controller (button) in my VI, digital indicator, in addition to a Boolean of power input.

    As an initial state, the digital display will contain a certain value (zero for example) and will only receive the variation in the button entry as long as the Boolean is true, and then add it to this initial value.

    What is the change ? lets say that the button was on 8 before I touched the Boolean true, the value of the indicator is zero, and then I hit the Boolean true.

    Now, when I move the button from 8 to 18 years (variation of + 10) , I want to receive the indicator + 10 and add it to the zero, now the result is 0 + 10 = 10

    Now, the value is false, I move the button and nothing happens to the in the indicator 10.

    Now, the Boolean value is true once again, let's say the button was about 4 at the time, I hit the Boolean true and it spend 4 to 1 (change-3) , the indicator value will now be 10 + (-3) = 7

    I hope I explained the idea in a clear manner, I would be very grateful if someone could help me with this.

    P.S. I have attached only the vi to illustrate the idea.

    Thanks in advance

    You care only remarks how the button changed.  Therefore, you must subtract the old value and the new value to get how to change the button.  Then add inside the structure of the case, this difference to your value that belongs in the registry to offset.

  • What is the function? : 'increment and save '.

    increment and save / file / menu

    It allows you to save the project file while you work through various stages of the project.  If you want to return to an early stage of the project, you simply open it upwards.  None of the things done in the later stages of the project appears.

  • Dynamic link with AE, increment and save?

    Hi all

    I am super frustrated.  I have a project of creation that is dynamically linked to a composition of AE.  I need to make the management of versions, and I prefer to use the method 'increment and save' in AE.  When I do, first refresh NOT the newest of the project folder.  I read online that there is a parameter "Dynamic Link with after effects uses project file name with as many ' in 'General', but I'm absolutely not that.  Can someone help me please?  I'm tearing my hair out here...

    This preference is in After Effects, first not Pro.

    See you soon,.

    The f

  • button that increments and that erases

    Hello, could someone help me with a code for a button when you click it, incremements by 1. I have a numeric field (do not know if it must be a numeric or text) and a button. I want to when the user clicks the button, the number in form of text or numeric field increments by 1. I also need a code for another button, that when clicked, clears the text field. I appreciate your help.

    Increment...

    Form1.Page1.Subform1.incBtn::click - (JavaScript, client)

    Form1.Page1.Subform1.NF.RawValue = form1.page1.subform1.nf.rawValue + 1;

    If {(form1.page1.subform1.tf.isNull)

    Form1.Page1.Subform1.TF.RawValue = '0 '.

    }

    var numStr = form1.page1.subform1.tf.rawValue;

    Form1.Page1.Subform1.TF.RawValue = parseInt (numStr) + 1;

        
    To clear...
    Form1.Page1.Subform1.clearBtn::click - (JavaScript, client)
    Form1.Page1.Subform1.NF.RawValue = null;
    Form1.Page1.Subform1.TF.RawValue = null;
  • arrow to increment or decrement clicked on CNC?

    is there a way to tell which arrow has been clicked by the user?

    Thank you

    Only indirectly:

    (1) read the value of the control

    (2) if the EVENT_VAL_CHANGED event has occurred, read the value of the control

    (3) the new value must be old_value + / increment_value; Since this change, it is possible to deduce the sign of the increment, which is positive or negative; This you can translate to up or down

    HTH,

    Wolfgang

  • Library cache pin and Mutex Ref count

    I understand that concurrency library cache is managed by library cache pin, and a session must acquire a PIN after blocking, now from 10 g Mutex (cursor: PIN) has replaced the locking pin: library cache. Now the cursor: hand S is incremented when another process is updating the reference (PIN) of a shared cursor count, it is in fact rather than sleep until the mutex is available, my confusion is that before this implementation of ByRef count which is effective, library cache latch was removed and assigned whenever the cursor was executed which was shared of course , now with Ref count each sessions only and only by increments and decrements without deletion and by allocating a memory lock (latch: cache library).

    Now what brings to my mind, is that for this mutex, it can be referenced at the same time many sessions, providing that all sessions of reference the mutex in S (shared Mode). So if they can refer to the mutex at the same time I don't think there should be any event queue unless just pending session increment counter Ref, so another question is can multiples at the same time run the cursor with the cursor: pin S. And I think that no. assume the session A, B, C wants to share a C1 cursor, they want to execute all this slider, now a, b and c session I think run independently of this slider, at different times, time, they have the chance to increment the counter of REF. Please remove my confusion, it is a humble request.

    842638 wrote:
    I understand that concurrency library cache is managed by library cache pin, and a session must acquire a PIN after blocking, now from 10 g Mutex (cursor: PIN) has replaced the locking pin: library cache. Now the cursor: hand S is incremented when another process is updating the reference (PIN) of a shared cursor count, it is in fact rather than sleep until the mutex is available, my confusion is that before this implementation of ByRef count which is effective, library cache latch was removed and assigned whenever the cursor was executed which was shared of course , now with Ref count each sessions only and only by increments and decrements without deletion and by allocating a memory lock (latch: cache library).

    Now what brings to my mind, is that for this mutex, it can be referenced at the same time many sessions, providing that all sessions of reference the mutex in S (shared Mode). So if they can refer to the mutex at the same time I don't think there should be any event queue unless just pending session increment counter Ref, so another question is can multiples at the same time run the cursor with the cursor: pin S. And I think that no. assume the session A, B, C wants to share a C1 cursor, they want to execute all this slider, now a, b and c session I think run independently of this slider, at different times, time, they have the chance to increment the counter of REF. Please remove my confusion, it is a humble request.

    I think you see the mutex as an object 1/0 a session must value 1 while it running the cursor. It's actually a counter that a session increments when it wants to run the cursor and decremented when it has finished execution. This means that if you want to run a cursor when the meter is already worth 5, we will both try to set to 6 - one usage will succeed and start execution of the cursor, the other fails but recognize that the meter is now 6 and set it to 7 before execution.

    To get detailed information about locks, mutexes and the differences between them, there is no better source of information at http://andreynikolaev.wordpress.com/

    Concerning
    Jonathan Lewis
    http://jonathanlewis.WordPress.com
    Author: core Oracle

  • calibration of Agilent N5183 Signal generator for specific output level

    Hello

    Newbie to labview environment!  I'm writing a VI to calibrate Agilent N5183 to a specific output.  For example if I want to have-4.5 dBm output of my installation (as stated on my electricity meter) I'll have to set the sig gen to say 7 dBm given my losses, etc.

    How can pointers, I start to weld it?  I think I'll have to create a while loop to check the levels of power, but I don't know how to increment and decrement the amplitude of sig gen and stop at the desired level!

    Thanks in advance for any help.

    PS: With the help of Labview 2013, on win XP!

    mkossmann wrote:

    3. adjust the pout to sign Gen to the desired level, while controlling the power power meter

    Why is it that step at all?  It is not clear from your description, what makes the difference between the reading of the gauge and the output level of the sigGen parameter.

    I have done many times.  Especially in the RF field, you want your tests to have a certain level of power to the object to be measured.  We therefore have to adjust your signal generator to compensate losses in cables, couplers, etc.

    To do this, all you have to do is set your generator to the desired level.  Then measure with the power meter.  Subtract the measurement of the desired and add that much more to the output.  Repeat if necessary.  I advise to use a conditional TO the loop so that you can easily set a limit to how many times adjust you (I've been in infinite loops due to the weird situations here).

  • Simulation of air conditioning

    Hey there, I was wondering if someone could help me design a climate control.

    Thus, it should have three controls, a digital control where you enter the current temperature (until the aircraft is used), another is a digital control, in which you enter the desired temperature and a button to turn on the a/c. There should be two indicators, a thermometer and a Boolean value LED that indicates when the desired temperature is met. I tried to do it with a while loop and a structure of matter to the breast, actually two structures matter, one where he would be with the increment and decrement but I just can't quite capture the entire design and cannot really achieve. Initial temperature must be in the thermometer when you run the VI but have not yet activated on the a/c, so the temperature should decrease from the initial State according to the desired temperature. Can someone give me an idea of how this could be done? Thanks in advance.

    Here's a tip or beginning...

  • increase the vertical size of the control on the front

    Hey,.

    I want to increase the vertical height of digital controls in front, but while doing so I don't want to increase the distance between the buttons increment and decrement of control.i tried to increase the height, but by using the node.but property which I find after some limit the distance begins to increase. I have attached to my account. If this is not possible. suggest me a way to increase or decrease the value of controller using large size as shown in the following file separate buttons.

    rich

    Use the 'spin control system', evolves a lot nicer.

    This is how it looks in point 8.1 of Windows:

    (NOTE: the exact appearance of system controls depend on the OS and desktop theme)

  • How to detect the event mouseclick-control

    I am trying to relax the max property Z on the scale of a graph of intensity to be changed from the front panel.  In the VI attached, I use an increment/decrement control and just detect a value change event (without taking into account the value of the control).  It works very well, even if it's a bit of a hack.

    I want to make them much more functional.  My main question is this: How can I detect an event 'control-click '?  I intend to use this event to change the max of graphic intensity by a factor rather than an additive value.

    A second quick question: on the numerical control, is there a way I can get rid of the number in the display space and leave only the increment/decrement buttons?

    Thank you

    Allan

    Are you talking about the button increase/decrease on a digital control?  I thought you had Boolean separate to increment and decrement. It's hard.  You can't be the PlatMods when using a value change event.  You will maybe make your own controls inc/dec and update a digital indicator rather than use a digital command.

  • ring personalized photo: disable the context menu

    I ring personalized photo - classic controls those - and they work very well when you click on the increment and decrement, however by clicking anywhere on the image causes a little popup to appear - as the ring menu control - which shows all the images. I would like to disable this during execution; How do I?

    IM on Labview 8.6

    Hi, Faust,.

    It's just a photo of ring with a decoration on top, but you can go...

    Only, I put the inner transparent area and left border decoration in black, so you can actually see the decoration...

  • cDAQ-9174 cannot use the counters of 3 or 4

    Hello

    I try to display the entry of a potentiometer and 3 encoders of Quad.  I have a CDAQ-9174 with a 9215 OR (for the POT) in the slot 1, 9411 or in slot 2 and a NI 9401 in the Groove 3 (soon to another NOR 9411 when it happens).

    If I run the example 'Measure angular Position.vi' on each individual encoder (by selecting either modules on counter 0), I can see all three encoders work properly (exit count increments and decrements as expected)

    If I run the Test panels able and automation, I see all three encoders switch their respective 2 channels each.

    But when I change 'measurement Position.vi"to have all three separate entries (I copied the task of creating and all its entries twice, then expanded the while loop to have three different DaqMX Read vi, then 2 clearer spots on the right side (output) at all in a loop), I see only 2 encoders increment and decrement.

    I do not use Index Z entries, I changed the type of decoding to X 2 for all three.  I tried to change that, but I especially get the same result (2 encoders working, is not 1).

    I changed the encoders are the use of counters to 0, 1, and 2.  Only the assigned to counter 2 encoder does not work.

    I tried to use meter 3 - same problem.

    Is there a way to confirm that the cDAQ-9174 counters all work?  I tried all three in the test panels and they seem to be good?

    A cDAQ-9174 can manage 2 Quad encoders using 2 signals of each (A and B signals - A for metering, B for management)?

    I have something configured incorrectly?  If you use two Modules of entry at the same time, is it some additional configuration that must be done?

    Really appreciate some help here.

    Thank you

    Sam

    Yes, we use the 9.0.2 version drivers and no there is no error message.

    Turns out we had wired it incorrectly for Counter 2 use.  Being on the second module, I thought we had wire the same way the first module has been wired - not realizing that counters need a provision of the specific pins.

    Thank you for looking into this.

Maybe you are looking for