Incremental DPP batch publish?

Is it possible for the DPP to generate jpg for raws that have changed since the last treatment?  I wish I had a way to know (in PPS) which photos have changes that should force republication and go ahead and treat them waiting.  Currently, I need to regenerate the entire directory tree to ensure that all pending updates are applied.

I suggest that you use the "Check mark" feature to tag your files.  "Checkmarks" to identify what progress you have made to an output file done.  The software allows to filter/select files that have a specific side 'tick '.

Tags: Canon Camera

Similar Questions

  • Getting error during d incrementing sequences by 10000... required emergency help

    Hi, I'm getting below error during the race the slot type increment of 10,000 on some sequences:

    Example query
    alter sequence increment 10000 AC1_CONTROL_SUMMARY_1SQ;

    The error;
    +++++++++
    change the sequence of increment AC_CONTROL_FILE_ID by 10000
    *
    ERROR on line 1:
    ORA-04005: INCREMENT must be less than MAXVALUE less MINVALUE

    alter sequence increment 10000 BL1_CHARGE_ADJ_1SQ
    *
    ERROR on line 1:
    ORA-04013: number of CACHE must be less than a cycle
    +++++++++
    My situation:
    Other teams are waiting for my task ends so that they can continue. I have to do something very quickly and provide the environment for them...

    +++++++++
    My questions at all:
    1. What can I do so that I'm increment these sequences of + 10000?
    2. changes as alter sequence MAXVALUE or alter the nocache sequence will have any negative impact on the database?
    3. the amendments referred to step reversible back. ??

    My questions at all:
    1. What can I do so that I'm increment these sequences of + 10000?
    2. changes as alter sequence MAXVALUE or alter the nocache sequence will have any negative impact on the database?
    3. the amendments referred to step reversible back. ??

    Answers to your questions:

    1 ALTER SEQUENCE sequence_name
    INCREMENT OF 10000
    NOMAXVALUE
    NOCYCLE
    CACHE 20;

    2. the NOCYCLE option indicates that the sequence cannot generate more values after reaching its maximum or minimum value.

    3. the amendments referred to step reversible back. ??
    INCREMENT OF ;

    Published by: rajeysh on July 21, 2010 23:46

  • Publication of batch

    Hello

    Anyone know of a way or tool that can be used for batch publish a large number of projects captivate swf files to individual.

    Thank you


    Lisa

    Hi Lisa and welcome in our community

    Call lasts, that one. Here's why.

    There is no such facility in Captivate that would allow this. At first glance, I thought maybe you might be able to use something like Macro Express to accomplish it. This would work by recording a macro that would be used. But I hit a mental block when I realized that you need a way to open each project and this file name will probably be different for each of them.

    In my mind, your question raises its own question. Why do you do this? What is your goal? I ask, because normally, editing is the final act you perform after you have made changes. You publish to create content. It is usually quite simple and does not take all that long. And I don't think I would make updates from multiple files without also publish each one, after that I updated.

    Or did you mean to ask, instead, if there was a way to "publish" on a server? (in this case, "publish" means take the content has already been compiled from the.) Format of CP in the. HTM /. SWF files and copy them to the server).

    If it is really what you were talking about, probably there are utilities out there that you could get. Just Google a bit to find them. But if this is the first, I guess it will be not easy.

    See you soon... Rick

  • Convert FLA CS3 to animate CC

    I have CS3 Professional 9 FLA version applications that I need to upgrade/migrate to CC animate.  Here are my questions:

    1. We currently batch publish using an FLP file, not animate CC has a lot to publish method?

    2. can I install Creative cloud on a server (for example Windows 2008 R2) or a few desktop computers?

    3. our CS3 applications are written in ActionScript 2.0 - animate those who will work in CC?

    Thank you

    your first two questions are irrelevant because you cannot use actionscipt 2 with any version of flash/animate after flash cs6 pro.

    but you can batch publish with all versions of flash/animate using jsfl.

    and I don't know what you mean by installing cc on a server, but the answer is probably no, you can't.

    Flash pro cs6 can be installed and used with a subscription of cc by installing previous versions: just after the point 1/2 towards the bottom of the page is a portal showing how to install previous versions, https://helpx.adobe.com/creative-cloud/help/download-install-app.html

  • How to make several projects at the same time?

    I am completely new to using Flash and I'm trying to use it to make effect of typing. But I am trying this doing 70 times, and because I couldn't understand how to have effect of repetition in a scene or a single project, I did 70 different folders. I don't want to have to monitor my computer for hours to him makes each file and manually set the following.

    Does anyone know how queue a list of .fla to render without a manual of export at the same time?

    You can batch publish using jsfl, but I you can do that you can write code to publish an fla that can produce a 'typewriter' effect to any text.

    do you know how corporate code of 'the typewriter effect' in your project?

  • Oracle 10.2 g-lack of number sequences

    We have identified some numbers were dropped generated by Oracle 10.2 g sequence features. Sequences were ongoing for most of the time, however, we witness a few gaps that occur randomly at times. This has happened in three of our tables. For an example that has only about 80 000 entries between sequences of ID from 800 000 to 900,000. Sequence jumped no permanently several times.

    Is this a known problem or is there another way, that this can happen?

    Code sequence:

    create sequences CASE_SEQ
    MinValue 1
    MaxValue 999999999999999999999999999
    Start with 966251
    Increment 1
    NoCache;

    Published by: user9276811 on April 4, 2011 02:02

    Look at the configuration of the cache of your sequences.

    http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:369390500346406705

  • Adjustment of content does not

    How can I set up the stage it fits the content exactly? There's always a border of 100 or more pixels.

    Basically, I extracted the batch a bunch of images of the FLA files and put them in their own .fla so I can batch publish them with a project file. So another solution might be there at - it a way to batch export the FLAS in the form of images? Image files do not have this extra space around the images. Thanks in advance.

    OK, so I thought I'd give it. Content of the correspondence is not necessarily average content match, that means set the scene on the content AND add equal space around the content. So if you want to simply adjust the content, transfer the content in the top left corner.

    Don't know if this is the case of rtfm, I want to say I can write a function that says add but in the manual, he explains that the add function adds really and it subtracts.

  • Conditionally to increment a variable in BI Publisher

    In a report that I build people containing a claim that I have 3 groups:

    • By date range
      <? xdoxslt:set_variable($_XDOCTX,'ttl14',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'ttl90',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'ttl180',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'ttlOver',0)? >
    • Year
      <? xdoxslt:set_variable($_XDOCTX,'yr14',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'yr90',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'yr180',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'yrOver',0)? >
    • Quarter of the year
      <? xdoxslt:set_variable($_XDOCTX,'q14',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'q90',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'q180',0)? >
      <? xdoxslt:set_variable($_XDOCTX,'qOver',0)? >

    I need to be able to count the number of people in each group that were requested for:

    • 0-14 days
    • 15-90 days
    • 91 to 180 days
    • More than 180 days

    I initiated the variables in their appropriate group as above and put the following code in lines detail of incrementing grouping according to the COL_CLM_DAYS field that contains the number of days that they've been on request. Unfortunately, this code does not work and I can't follow where I'm wrong

    <? for - each:current-group()? > <? type: COL_CLM_1ST_DY_UBL; ' ascending '; data-type = "text"? >

    <? xdofx:If COL_CLM_DAYS < 15 then

    xdoxslt:set_variable ($_XDOCTX, 'ttl14', xdoxslt:get_variable($_XDOCTX,'ttl14') + 1).

    xdoxslt:set_variable ($_XDOCTX, 'yr14', xdoxslt:get_variable($_XDOCTX,'yr14') + 1).

    xdoxslt:set_variable ($_XDOCTX, 'q14', xdoxslt:get_variable($_XDOCTX,'q14') + 1).

    ElseIf (COL_CLM_DAYS > 14) and (COL_CLM_DAYS < 91) then

    xdoxslt:set_variable ($_XDOCTX, 'ttl90', xdoxslt:get_variable($_XDOCTX,'ttl90') + 1).

    xdoxslt:set_variable ($_XDOCTX, 'yr90', xdoxslt:get_variable($_XDOCTX,'yr90') + 1).

    xdoxslt:set_variable ($_XDOCTX, 'q90', xdoxslt:get_variable($_XDOCTX,'q90') + 1).

    ElseIf (COL_CLM_DAYS > 90) and (COL_CLM_DAYS < 181) then

    xdoxslt:set_variable ($_XDOCTX, 'ttl180', xdoxslt:get_variable($_XDOCTX,'ttl180') + 1).

    xdoxslt:set_variable ($_XDOCTX, 'yr180', xdoxslt:get_variable($_XDOCTX,'yr180') + 1).

    xdoxslt:set_variable ($_XDOCTX, 'q180', xdoxslt:get_variable($_XDOCTX,'q180') + 1).

    on the other

    xdoxslt:set_variable ($_XDOCTX, 'ttlOver', xdoxslt:get_variable($_XDOCTX,'ttlOver') + 1).

    xdoxslt:set_variable ($_XDOCTX, 'yrOver', xdoxslt:get_variable($_XDOCTX,'yrOver') + 1).

    xdoxslt:set_variable ($_XDOCTX, 'qOver', xdoxslt:get_variable($_XDOCTX,'qOver') + 1).

    end if? >

    You cannot mix xdofx and xdoxslt statements.

    Please try this with choosing the command

    < 15?="">

    14 and COL_CLM_DAYS< 91?="">

    90 and COL_CLM_DAYS< 181?="">

    If you are still having issue then download example of xml data.

  • The batch change date and time

    I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

    When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

    Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

    Any guidance would be greatly appreciated.  Thank you.

    Just delete the text "" * minutes ' in the lines where the date is changed. "

    Then time will be incremented seconds.

    For example, for the first version of the script use:

    the value timeIncrement to 1 - increment of time in seconds

    (* select at least 2 images in Photos *)

    say application 'Photos '.

    activate

    game imageSel for (get selection)

    if ({ is } imageSel) or (the length of imageSel < 2) then

    error "Please select at least two images."

    on the other

    defined first_image to the point 1 of the imageSel

    the value first_date to (the date of first_image) as date of

    Repeat with I from 2 to the County of imageSel

    put next_image to the point I of imageSel

    the value next_date to (the date of next_image) as date of

    the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

    say next_image

    the value le Date of next_image to (next_date + time_difference) as date of

    end say

    end Repeat

    end if

    return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

    end say


  • The batch numbers in sequential order on my pictures to show and sell on the web.

    The batch numbers in sequential order on my pictures to show and sell on the web.

    Is there an easier way to do it? I have to manually type in each issue of the photo, and I have hundreds of them to publish.

    You can see on my site.  www.SAP.net.nz this will give you a better example of what I'm doing.

    The batch numbers in sequential order on my pictures to show and sell on the web.

    Is there an easier way to do it? I have to manually type in each issue of the photo, and I have hundreds of them to publish.

    You can see on my site.  www.SAP.net.nz this will give you a better example of what I'm doing.

    =====================================
    I noticed your site file names are not the same
    numbers on the pictures but if the names
    photos were the same numbers you wanted
    Add to the face of each photo... the freeware FastStone
    Image Viewer can do and it can omit the file
    extension.

    IOW... If you had the following file names:

    123.Le jpg
    124 jpg
    125 jpg

    FastStone could add 123, 124, 125... in the face of
    a photo of selected group in a batch.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    FastStone Image Viewer
    http://www.FastStone.org/FSViewerDetail.htm

    Add file names:

    I suggest that you create a new folder and add
    copies of your photos for experimental purposes.
    If you are unhappy with the result your originals
    will be intact.

    How to:

    "Basic steps to add text to the image files.
    using Fast Stone Image Viewer"

    Tools / open the Batch Conversion / tab Batch convert...

    Check the box... Use of advanced options...

    Advanced Options button / tab text.
    Check the box... Add text...

    Open the window drop... "Insert a Variable."
    choose... The file name / no Extension... Ok...

    Add the files you want to add...

    Choose an output Format...

    Choose an output folder...

    Click on the button convert...

    (You will need to experiment with the position and the police
    size and color to get the desired result.)

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Windows 7 will not allow a batch file to run.

    I created a batch file.  Double-clicking it in Explorer lights up only the Publisher.  It runs in a command window does the editor.  That is what it is?

    Should it run in Compatibility Mode for Windows XP (SP3) maybe? Right click, select Properties , and then make the changes in the compatibility tab.

    You didn't mention what your batch file has been written to do, but it must run an command with administrator privileges prompt?

    To start an elevated command prompt, click Start and type CMD but do not press ENTER. Find the program listed above CMD and right click and select run as administrator.

    If this does not work the script file, you will need to click right on the. BAT or. CMD and select Properties. Under the tab compatibility , under privilege level, check the run as Administrator option. This should be performed by the users of the human resources of the computer, click on change settings for all users and make your changes as well.

    • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.
  • With the help of legends custom B2B with incoming messages batch to push directly to an AQ queue

    I'm trying to create a legend, attached to a partnership agreement, which will process an incoming batch load and write each individual message in the batch to advanced queue.

    I have the following in place pieces and works so far... 

    1 QA 

    2 B2B lot

    3. partnership agreements

    4 making SOA message waiting

    5 Basic legend in place and access to the message.

    My problem occurs in step 5.  My legend is fired as each message in the batch is traversed and the output of the whole lot (all messages) seem to be added to the AQ at the same time. (They are messages separate, which is good, but I try to insert a pause in order to limit the speed at which these messages are pushed on the queue).

    My question is, How can I publish the message I shot of the lot to QA immediately that I did it - as opposed to add the message to the standard output of the legend? 

    [sample code and further explanation below]

    . . .

    I have tried this approach because my queue is set up in a clustered environment and the options I've seen so far for the AQ limitation apply only to single-server systems.  For example, setting the property minimumDelayBetweenMessages in my composite SOA side for fact the message isn't an option for me.  We have no access to the database settings associated with querying on distributed systems.

     

    Here is a version of my legend:

    public class inboundThrottler implements legend

     

    public Sub run (context of CalloutContext, )

    throws CalloutDomainException, CalloutSystemException  

    { 

       try  

    //Retrieve the properties of the legend of CalloutContext

    String context.getStringProperty = TimeInterval ("timeIntervalInSeconds"); 

      System. on .println ("Time-out interval is" + timeInterval); 

    //Get the message of the legend of entry

    //Message Passthrough

    CalloutMessage cmOut = cmIn;

                try {

      TimeUnit. SECONDS . Sleep (timeIntervalAsLong);

    { } catch (InterruptedException e) { }

                          System. on .println ('error found in the part of the timeout of the legend');

    e.printStackTrace ();

                      }

      System. on .println ("+++ B2B LEGEND PROPERLY TREATED +++ ');

    output.add (cmOut);

    //Throw exception, if any

      { } catch (Exception e) { }

                     System. on .println ('error found in the legend'); 

    take new (e) CalloutDomainException;

      }

      }

      }

     

    Y at - it something other than output.add (cmOut); can I use to insert my message in QA?

    In my server logs, I can see the "+++ B2B LEGEND CORRECTLY PROCESSED +++ ' message for each message in the batch however, they are all pushed to the AQ at the same time and that is why they are all handled by the composite made as fast it can handle to Dequeue the message.  When we deal with more payloads of 5000 messages, the end result is a highly bogged down the server and in some extreme cases, the server crash.

       

    Thank you in advance for any input. Even if there are better ways to strangle my incoming messages (I certainly heard about these opportunities) for my own edification, I too wish to know suggestions for the insertion of my message in AQ at the point in my code that I have highlighted.

    I found a solution, and because I didn't know all the answers on this topic, I'll go ahead and answer myself for the sake of posterity.

    The short answer is do not use a legend Java at all since the intention of the legend was first place to strangle incoming messages so that they are placed on QA in a more controlled way and at a pace slower to allow SOA handle a large load. I found an excellent article, "handling large payloads" [https://docs.oracle.com/middleware/1213/b2b/b2b-user/app_perform.htm] which addressed my needs perfectly.

    To summarize in a few words, there are a number of settings that can be made as size to commit partial lot, size of the payload and large load useful program, in conjunction with a setting called 'Enable the Streaming' in the bpel AQ adapter side SOA Dequeue of things who will accomplish what I need to do.  The version I use is Oracle SOA Suite 11.1.1.7

    Directly related to the question, I referred to above concerning how to insert a message directly in my QA:

    I will not go into the horrific details, but basically I create a ConnectionFactory via an InteractionSpec to get the right connection managed, then convert the message correctly and insert the message in the queue, taking care to manage the space of thread, and close all open connections.  Finally, in my contract partner, I make a note to NOT add the message to the queue after my process of legend in order to avoid duplication of messages.

    All said, I'm happy I found a way to let SOA Suite and B2B to treat this issue with a few "out of the box" settings, because even if the captions can be very useful to insert a custom header or do a quick transformation, using them to enter the bowels of my managed connections are not a walk in the Park.

    Hope this question and the subsequent response will be useful to those seeking similar tasks on the road.

  • Error running batch utility load - epmerpi-107600 fdmee

    Hello

    You try to run the load of a batch:

    Password data load uid GL Y Y replace r N Mar13 Apr13 full SYNCHRONIZATION

    Receive the error message:

    EPMERPI - 107512:Invalid the value passed for the execution Mode setting.

    I tried all 3 run modes:

    Snapshot

    Incremental

    Full refresh

    No idea why he does not like this?

    Thank you!

    S/b FULLREFRESH full refresh

  • Cannot be saved in the Destination folder with the Batch command

    I am trying to save images for the web with a batch command.

    It seems that they are saved in the original folder used when creating the action.

    The destination folder, I chose in the command batch window is not written in.

    Is there a cure for this?

    Start your action recording and do all the steps you would if editing an image (in addition to open; open is done by the batch script). Thus, for example: resize your image; convert to profile (sRGB); Save as (using the short keys Ctrl + Alt + S (win) or Cmd + Opt + S (mac)); Close (Ctrl + W or Cmd + F). Save As has been used, economy will be like a copy. Well, which means that when you close it you will be asked whether to save the original - select 'no '. Now, you have completed the Action then finalize by stop recording. Every bit of this info will be published in the Action.

    Now give her another chance.

  • How to check if the field is always get incremented by 1

    Hello all-

    This might be a very basic question. I'm just checking if a field is get incremented by 1 only. Here's my table structure:

    CREATE TABLE 'DIM_STAR_DAY '.

    (

    NUMBER of "DAY_DW_ID."

    "DAY."

    NUMBER OF "DAY_NBR_IN_EPOCH."

    NUMBER OF "DAY_NBR_IN_EPOCH_LY."

    NUMBER OF "DAY_IN_WEEK."

    NUMBER OF "DAY_IN_PERIOD."

    NUMBER OF "DAY_IN_QUARTER."

    NUMBER OF "DAY_IN_YEAR."

    CONSTRAINT 'PKDIM_STAR_DAY' KEY PRIMARY ("DAY_DW_ID") WITH THE HELP OF INDEX PCTFREE, INITRANS 10 2 MAXTRANS 255 COMPUTE STATISTICS NOLOGGING STORAGE (INITIAL MINEXTENTS THEN 1048576 65536 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 USER_TABLES FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "MART_INDX" ENABLE

    )

    I want to check the field DAY_DW_ID should it still increased by 1 which corresponds to DAY field which means this condition should never happen, because these are two continuous days and day_dw_id should increase by 1 only:

    • Day_DW_ID DAY
    • 5964-4/26 / 2014
    • 5981 4/27 / 2014

    How can I write a query that gives me all these days where corresponding day_dw_id is higher than its previous day_dw_id 1. Thanks for your help and your answers. Very much appreciated.

    Hello

    This sounds like a job for the analytic LAG function:

    WITH got_prev_day_dw_id AS

    (

    SELECT d. *- or else

    AS trolling (day_dw_id) prev_day_dw_id (ORDER BY date)

    OF dim_star_day d

    )

    SELECT *.

    OF got_prev_day_dw_id

    WHERE day_dw_id <> 1 + prev_day_dw_id - or >

    ;

    This will display the rows where day_dw_id is greater than 1 higher to day_dw_id on the previous line (where 'previous' means 'in the order of day").  It also displays the rows where day_dw_id is less than 1 higher than the previous day_dw_id.  If you want to only include rows where the difference is greater than 1, then use > in the WHERE clause instead of <> .

    I hope that answers your question.

    If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.

    Explain, using specific examples, how you get these results from these data.

    Always say what version of Oracle you are using (for example, 11.2.0.2.0).

    See the FAQ forum: https://forums.oracle.com/message/9362002

Maybe you are looking for