Independent cursors on the Board of the cluster of graphics (or work around)

Similar Questions

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• 9.2 Organization repeat audio to fill after empty sections of the audio in the timeline panel. No work around? I'm on a MacPro to 2014.

  Just noticed this problem with empty sections of the audio in the timeline panel. 9.2 organization wants to fill then with audio of the previous element rather than let their silence when it is rendered. No work around for this bug?

  Hello

  On Mac, you can export via SOUL with sequences of import in native mode. Alternatively, you can export directly from Premiere Pro. It should be resolved. You can also export with a "Virgin" audio section where you have gaps.

  This is a known issue that we should have fixed in our next update. Sorry for the problem.

  Thank you

  Kevin

• How to convert the MBR to GPT to work around Windows Installer error bootcamp

  Hello

  I have a problem as a previous post (8.1 to Windows Installer on iMac with drive fusion, GPT partition error):

  "Hello,

  I have tried to install windows via bootcamp on my iMac and can't seem to fix the "Windows cannot be installed to this disk. The selected disk is the GPT partition style' error.

  I successfully completed all the steps until I'm in Windows Setup and select the partition on which Windows should be installed. I get the error "Windows cannot be installed to this disk. The selected disk is the GPT partition style. "I formatted the partition, but I still get the same error. »

  Trying to get this resolved as soon as POSSIBLE. I have a MacBook Pro 8.2 (early 2011). El Capitan installed. I already disabled SIP. Try to install Windows 10, if possible, or 8.1 if and then to 10. The target volume is disk0s4. I was able to successfully create a Setup disk Windows 10 USB (even on my MBP 2011), thanks -windows-to-create-the-usb-flash-drive-for-mountain-lion-with-updated-boot-camp/ https://mihail.stoynov.com/2013/04/22/force-boot-camp-into-using-an-iso-image-of

  I tried to look around in this forum and elsewhere to solve my problem. I have met help desk 'Loner' of T and hope he can ring for my case. Here is the result of the following commands in a Terminal:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  In addition, I downloaded gDisk but I can't seem to be able to select all the options. Be waiting for instructions.

  Thanks in advance.

  Best,

  Gabriel

  Last login: my Apr 25 14:24:12 on ttys000

  dGabriels-MBP: ~ the gabrielaxel list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Axel HD 937,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Windows 61.7 GB disk0s4 data base

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 15.6 disk1

  1: DOS_FAT_32 WININSTALL 15.6 GB disk1s1

  Gabriels-MBP: ~ list of cs gabrielaxel$ diskutil

  No logical volume group CoreStorage found

  Gabriels-MBP: ~ gabrielaxel$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1831009760 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  1831419400 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1832688936 120574048 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Gabriels-MBP: ~ gabrielaxel$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-1831009760] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1831419400-1269536]

  04:07 1023 254 63-1023 254 63 [1832688936-120574048] HPFS/QNX / TO THE

  Gabriels-MBP: ~ gabrielaxel$

  Hello again,

  Due to the time constraint, I went ahead and had a run of luck the orders gdisk on mine. My Bootcamp partition is disk0s4. I get the following error:

  Complete control of the final. About to write data of TPG. THIS WILL OVERWRITE EXISTING

  PARTITIONS!

  Do you want? (Y/N): Y

  OK; new partition table (GPT) GUID written/dev/disk0.

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Abandonment of writing!

  Is it just b/c that I can't make these changes on the disk I am running off?

• Help! :-(my xp pro edition is not authentic, but I have a genuine product key stuck on the laptop how can I work around this?

  I found that my laptop was only on xp pro service Pack1, so I made a few updates now, ive got running on service pack 3 but it keeps flashing up I have a non-genuine version of windows, windows is activated and I have a real sticker on the bottom of my laptop with the product key to this topic! This problem me by critical updates prevents someone can help!

  Thank you very much

  Rob

  Update your product key, and use the one you located in the laptop, you can check out the link below to update your product key.

  http://go.Microsoft.com/fwlink/?LinkId=204141

  To update your product key

  1. Open the Windows product key update tool.

  2. When you are prompted to run or save the installation program from the Windows product key update tool, click run.

  3. Follow the instructions in the installer.

• New to Lightroom. The search for keyword spelling work around...

  I just installed Lightroom and two keywording problems after importing the largest of my photos (almost 14 000 files) files.

  
  I was keywording in Bridge and found it much easier to type in the words. Used iView in the past, so don't worry much about spelling. iView show me different spellings used for a Word and I could choose the pictures, correct spelling and spelling errors has been corrected in the metadata of photos.

  
  1. in Lightroom, I select the pictures/photos with misspelled words, correct that the word and Lightroom will not accept the change, because there is already a keyword of the same name. If I delete the misspelled keywords (I guess I can?) then I have no idea how to find these photos and add the correct keyword.

  
  Just by writing this, I thought to put the words misspelled in a collection and then when the misspelled word is deleted, I still have pictures. I could drag the exact keyword for them. What is the best way to go? (I have not tried the collection function again).

  
  2 another problem frustrating: I do not use hierarchical keywording and Lightroom pulled my keywords in the hierarchical Keywords system. Now I have 'Place', 'People', etc that clutter my field. Is there a way to tell Lightroom I want to use the hierarchical system? Is there (please please please) a pretty quick way to get rid of all words as place and people I am not there? If there is a preference I'd before importing, I prefer to make a new catalog and re import rather than trying to find all the high fields to the page to remove.

  Peg

  Element of reference 1.

  In the library - the grid view Module

  Go to the keyword list Panel

  Select a misspelled word, and then click the arrow to the right of the keyword.

  Select all

  Click the checkbox to the left of the CORRECTLY spelled keyword to apply the correct spelling.

  Clear the check box to the left of the keyword spelled

  Delete the misspelled word.

  Files should only have the correctly spelt version

  Reference element 2

  Lightroom does not use a hierarchical strategy, unless you say so. If your images are as (from bridge, for example) with a hierarchy, it will be replicated. A keyword that is automatically set to receive the child keywords will have a little asterisk following the keyword. If you have one of these you can get rid of it by right click and uncheck "put new keywords inside this keyword.

  Before you delete keywords at a higher level, you want to make sure that you moved all the keywords lower level out of them. If you delete keywords at a higher level, he will kill the keywords of the child inside.  Keywords can be slid in or out of a hierarchy by dragging.

• When I cut and paste data containing .jpeg files in TB, it blocks showing 'fixing' and does not complete the e-mail. No work around?

  Rel 24.6.0, Windows 8.1 TB

  https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

• How to select the cluster/resourcepool data store?

  Hello

  as you know others my son, I'm working on a workflow to create several identical virtual machines on a VC-cluster.

  At this time a virtual computer is created like this:

  task = vmFolder.createVM_Task( configSpec, vmCluster.resourcePool);
  

  Context is being filled with the configuration of the virtual machine. vmCluster is a workflow input parameter and contains the cluster.

  It works well, but I still have to specify the data store to store files on a different input parameter, because the cluster has several shared storage units.

  Note also that our clusters have only a single pool of resources, the default.

  Let the user select a data store is not a very nice solution because of possible errors and mistakes (the user can select the local drive of the VMHost, lack of space on the storage selected etc..). But I, as a developer, also can not predefine the storage to use (several storage units, unit of different names etc.).

  Now, what I've been thinking about (and trying to implement) was to get the vmCluster data warehouses or the resourcePool, check if they are put in place for the virtual machine files and if they have enough space for the virtual machine.

  I know how to check the size and which storage are to be used for virtual machines, but I don't know how to get out them of the cluster/resourcepool.

  Can someone help me with this?

  Thank you and

  Concerning

  Andreas

  PS: Is it just me or I really make things complicated with orchestrator here?

  Hi Andreas,

  One way to get the value of storage of data is to use VcSdkConnection.getAllDatastores

  For more information, see here: http://www.vmware.com/support/orchestrator/doc/vco_vsphere41_api/html/VcSdkConnection.html#getAllDatastores

  Personally, I have not played with it, but it seems very powerful.

  There is discussion on the use of xpath in such a case in this topic (to get the value of VMs): http://communities.vmware.com/message/1673575

  Other than that you could:

  -use VcSdkConnection.getAllClusterComputeResource (gets all clusters) or VcSdk.getAllResourcePools

  -in case you work with clusters - each cluster's data store property that returns an array of data for this cluster warehouses

  -in case you use pools of resources, you must check that is the parent of each resource pool and get its data warehouses.

  Kind regards

  -Martin

• Links working in the preview, but does not work after the FTP download

  I have multiple master pages in my muse adobe site and all works perfectly links in the preview. After download of however, and visit the online site, two links in my master page won't work. On another master page, all the links do not work. I also have different skins for hover, active and visited States and some links work but do not properly follow their States. Pointing the cursor over the links that don't work as turns the mouse in the insertion cursor of type rather than the link hand cursor, as if links aren't links at all, just the text. I have had this problem before, when the first generation site and was able to get technical support for adobe to fix it for me through some troubleshooting by chat. However it happens to more of my links now. I have everything set up according to the interface of muse adobe that it should work fine. I have no idea why I continue to encounter this problem. Any help would be appreciated! Thank you

  On your model page to make a selection of all the... CTRL/A or CMD/A to select all elements on the page. Looks like you have some invisible items you overlapping menus. Alternatively, you can try to right click on your menu and then "put at the top". Hope that helps. If this isn't the case, you can provide a link?

• How can I change the appearance of the cursor of the mouse on the Board animate when it is over a link?

  I want to change the appearance of the mouse cursor when the end user place it above a link to e-mail and site Web - how do I do this?

  Add the following code in the step/compositionReady:

  SYM. $('texte') .bind (' mouseenter', function() {} ")

  SYM.$('text'). CSS({'cursor':'pointer'});)

  });

  Don't forget to change the name of the item to your.

  You can use the click or the mouseenter and mouseover.

  or if you want just in general, select the item and change the slider in the UI.

  

• How to use the cluster VI elements in TestStand

  I have a LabVIEW VI, which has an output cluster containing 10 hooks and 10 Boolean values.  In TestStand 4.1.1 I inserted a VI of pass/fail in my test sequence and that related the LabVIEW VI VI of success/failure.  I have seen all the strings and Boolean values listed separately in the table of settings under the tab module.  I wanted to have each of these cluster items listed in the report, so in the value fields, I inserted Step.Result.ReportText, but elements of the cluster were not included in the report.

  I then tried to turn the cluster in a custom, data type that has been a success.  In TestStand to sub tab module to LabVIEW adapter, I created a customized data type under space corresponding to the cluster of exit from VI.   If I go in the variable pane of TestStand, I can see the custom data type and each of the 10 channels and 10 Boolean values are present in the form of individual variables.  I tried right clicking on the variables of cluster and selecting Properties and then go advanced and checking the PropFlags_IncludeInReport box, but the values of variables have not appeared in the report.

  What I want to do is to have each of the string values and Boolean values appear in the test report.  So what I am doing wrong?

  Hello

  You can use the additional result.

  You assign inhabitants out of the VI and then you can insert an Additionl result for this step. See in the parameters of the step.

  Don't forget to insert your Local in the area concerned in the additional result.

  http://forums.NI.com/NI/board/message?board.ID=330&message.ID=22838#M22838

  The link can also help

  Concerning

  Ray Farmer

• Writing only to certain parts of the cluster in an array by reference

  Hello

  I have an array of clusters that I use as well to view and enter data, i.e. elements of the cluster are unmodifiable (disabled) controls used as indicators of "false" (numeric values, strings, LEDs) and some are normal witnesses (numerical values, buttons).

  The "indicator" part of this cluster table must be constantly updated (for example with the positions of the engines), normally by replacing the elements according to cluster in a loop and writing in the table. This can lead to conditions of race with the part 'control': If the user enters data in a 'bad' timing control, it gets immediately replaced by the old value - in this case the update process began just before the user input and completed just after the entrance of (which may be a simple click is enough) , so the old values of controls are rewritten on user controls, as the table should be rewritten as a whole.

  Now, I'm looking for a solution to this critical race condition without changing this 'mixed' approach of control/indicator (e.g. by control and indicator tables separated next to each other and paired scrolling or so - which would make it much more horrible GUI design, among other disadvantages). I know that it is possible to change the value of an element in the cluster without having to rewrite the entire cluster using the element reference. However, it's more complicated if you have an array of clusters, because you want the cluster to a certain index table and to my knowledge, there is no such property that gives you for example the reference to the item table located in an index of certain (who is a lack of long date in the table of Labview manipulation). If you change the 'value' of an element of the cluster property in a table, it seems to affect the 'last active' element of the array, at least it is correlated with the array element that was clicked on last. Maybe there's a way somehow programmatically set that ' last active ' array element and browse the table in this way (setting the flag "correspondent" elements of the cluster by reference) or maybe someone knows a solution 'Nice' and elegant?

  I hope you understand what I mean

  Thanks in advance!

  To avoid such conditions of race, make sure what you write on the Board in the same place change you and write only the data for the indicators. Practically, this means that if you have an event for the control change value, you must have another case of event in the same structure of update of the indicators (timeout or a user event) and make sure that the indicator event takes the rest of the data of the current value (for example through a terminal or a local variable or the DVR suggested Steve). Similarly, you can use the terminal control to the current value of the control for the indicators rather than depend on the event containing the correct value.

• Decorations outside the cluster - cluster or not?

  LabVIEW 8.6.1.F1

  If I have a cluster on a Board, and I have a decoration (a flat frame, for example) behind him, then if I hide in the cluster, the whole image appears.

  This is just what I expected.

  If I create a cluster in the EDITOR CONTROL and put a flat frame outside of, and behind, the cluster and call it a TYPEDEF, then when I put an instance on the Panel and hide the cluster, I see no frame.  It's just not there.

  Why?

  The property of [] the decorations of the cluster will not - help is not part of the cluster.  But if it is not part of the cluster, why he get hidden with her?

  CoastalMaineBird wrote:

  so when you hide the control framework disappears as well.

  What is surprising to me.  It is not within the cluster, this is why it is not CONTAINED by the cluster, but apparently it is still OWNED by the cluster.

  It has nothing to do with the cluster; It comes to the custom control, which the frame is a part.  You could do the same thing with a square large boolean and shading behind it.  For me, would make any sense if it didn't work this way - would be strange if you created a custom control with some decorations, and then used a property node to hide the custom control but only some of them have disappeared?

• How to create the cluster in weblogic

  Hello to all the ups...

  We pass our 6i has 11 GR 1 material. After the migration of our very poor server performance. So now, we want to use clusters. After a google search, I have not found any better way to do. We create two independent with machine

  Server Admin

  Forms

  Reports

  Lets assume that the machine name is SACHIN1 and SACHIN2.

  Now, how to create the cluster on SACHIN1?

  Please help me.

  Thank you

  Sachin

  Hi salah

  I understand, he has several steps. The steps apply only to the WebLogic Server.

  To ensure high availability with a top layer products it is WDM. I did research more far and I found that there is a WDM for forms and reports.

  I found WDM for forms and reports 11.1.1.2:

  http://www.Oracle.com/technetwork/database/features/availability/MAA-EDG-frd-129690.PDF

  Is there a reason on why migration is 11 GR 1 matter? first support for 11 GR 1 matter ended in June 2014

  http://www.Oracle.com/us/support/library/LSP-middleware-chart-069287.PDF

  We could get help on the following forums:

  Oracle reports (MOSC)

  Oracle Forms (MOSC)

  Best regards

  Luz

• Why new tabs do not place the cursor in the url as before?

  yesterday, I click New tab and the tab page comes up with the emphasis placed in the URL bar Highlighter and all I have to do is enter the address I want to search or go to
  Today, the focus ends up with the cursor at the end of the address in the URL bar... NOT GOOD!

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox