InDesign CC falls down during the boot process

If CC InDesign lance, he gets up to a certain point before it crashes everytime at the same point.  It is 64-bit only, 32-bit is still in charge, but it's much more slow and terrible to work for me.  I am running Windows 7 and have all the latest cloud only indesign updates installed.  I tried to leave the application of launcer CC so TypeKit fonts not loading at startup with nothing helped.  I tried to use msconfig to a selective startup, do not load the startup items and restart and once again, no dice.

Capture.PNG

Here is the full text of what you see the problem in detail in this screenshot of the window above:

Signature of the problem:

Problem event name: APPCRASH

Application name: InDesign.exe

Application version: 9.0.0.244

Application timestamp: 5176f4c7

Fault Module name: ObjectModel.dll

Fault Module Version: 9.0.0.244

Timestamp of Module error: 5176f4b9

Exception code: c0000005

Exception Offset: 00000000000261 c 0

OS version: 6.1.7601.2.1.0.256.48

Locale ID: 1033

Information additional 1:9529

More information 2: 9529754cc72c58f900e33c4f1855fb96

3 more information: fe5f

Additional information 4: fe5f55426fc3e5a2feae05a45cff6f40

No problem. The bad news is that confirms that this is not a problem at the user level. I think you really need to uninstall CC, and then run the cleanup tool (CS for installation problems cleaning tool |) CCM, CS6, CS5.5, CS5, CS4, CS3), then reinstall.

Tags: InDesign

Similar Questions

  • HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

    Hello

    I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

    -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

    -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

    However, during the startup the company name is still displayed on the top of the screen... :-(

    (1) how can I change this text to start or remove it completely?

    (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

    Thanks in advance,

    SJW

    PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

    Hello

    I managed to change the line of text with the BiosConfigUtility64.exe.

    With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

    Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

    Best regards

    SJW

  • Lenovo T410s and Mini Dock Plus Series 3 with 2 monitors DVI, white screen during the boot process

    Hello

    I'm having a problem with the configuration of my lenovo thinkpad T410s.

    I have connected two 19' DVI monitors for the docking station, but during the startup process, I get no output on screens.

    After loading Windows 7, the windows login screen.

    In the BIOS all the graphics preferences are being "switchable graphics", because I also use it on business trips.

    Does anyone have an idea how to solve this problem?

    Thank you!

    Michael


  • How to disable the driver during the boot process?

    Hello

    I have uninstall a printer from my computer, but when I restart my computer during the process sometimes a back pop up windows and require a response at the prompt of the printer driver I uninstall, but this statement was not disabled or deleted.

    How can I access the startup file to change?

    Thank you

    Hi Reyes,

    Restart your computer and start pressing on the keys on your keyboard. On a computer that is configured to start to multiple operating systems, you can press on the -key when the Boot Menu appears. On the Advanced Boot Options menu, select Disable the Driver Signature Enforcement press .

    This will disable the drivers at startup.

    Hope the helps of information provided.

  • Satellite P70-A-11 q - Windows 8.1 stops during the boot process

    Hello.
    I have a q P70-A-11. almost from the first day I got the camera that I have problems with starting.
    The OS is installed on a 250 GB SSD.

    Treat it as I turn on the laptop and its still the boot stops down unexpectedly without an error message.
    This happens almost every time 2nd, I try to start the laptop.

    I know this isn't a lot of information but I don't have any newspapers, or something that I can help you.
    Concerning

    You are right. There isn't a lot of information on this virtual path, it is not easy to say what the problem is.
    What is your laptop preinstalled with original OS that you got with it? I presume that the only change is upgrade SSD, right?
    So if I understand you well you traded original HDD with new SSDS and original recovery image is installed.
    This problem started immediately after the upgrade to SSD?
    When you put the old HDD inside the same thing from happening again?

  • Urgent! -Adobe CC falls down during the process of "extract" of Photoshop, need to install the version full, without hollow CC

    I need emergency aid because Adobe CC crashes after the 'extraction' of an application process. So if I chose to download an application (Muse, Photoshop, etc.), download it and after that it crashes, is there any support available?

    Thank you

    Problem solved, it is the firewall that blocked the installation, everything works fine now!

  • HP Pavilion 23: computer hangs during the boot process

    Computer updates been made 2 days ago and has frozen black screen. Now does not start at the top. Starts the process and then freezes. He did start once yesterday and was going well for a few hours, then got a message saying computer had a problem.

    Error message:

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (atikmdag.sys)

    Now back to not start upward again, hangs with the HP logo on the screen.

    Hi there @ldgie25.

    That the Forums are with you!  I understand that, after a few updates, your computer does not start correctly and freezes on the HP logo.   I'm happy to help you with this.

    Since it was started once, but then had a blue error screen, I suggest using the computers HP - use Microsoft System Restore (Windows, 10, 8).   Follow the instructions in the section «restore your computer when Windows is unable to boot normally»  See if it will start normally after the restoration. If yes then you probably want to prevent the offending update to install again.

    Please see the following for how to do this:

    How to temporarily prevent an update for driver reinstallation of Windows 10 - support.microsoft.com

    How to uninstall and updates to block and drivers on Windows 10 - howtogeek.com

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • Satellite A660 - 12 fall down during the update of the BIOS, start again

    Hi all

    I bought my laptop A660-12th in June 2010, and a few months I've been encountering frequent problems of freezing of the screens, stops unsollicitated... so I decided to clean up my computer and update programs the computer base (including the BIOS) with the latest versions available on the Toshiba site, hoping it would be more correctly.

    Then, when it came to upgrading the BIOS. I wanted to do it slowly because I know this is the most delicate point in the update, but I don't know what is happening during this step: program launched barely (and it was the only program running) that it has been already updated my BIOS, and in this special moment my laptop automatically go restarted... obviously I don't have BIOS more because my computer does not start still, the screen does not display anything AT ALL. There is just the noise of the fan and the lights when I turn it on, but that's all.

    I am so very angry to the Toshiba BIOS update program (and also Toshiba), because I feel that I have everything done correctly, but nevertheless this update bricked just my computer.

    Is it possible to get it back, or do you also think it bricked and lost?

    I'm afraid BIOS is dead now and what you need now is a professional help from m.
    I highly recommend you contact the nearest Toshiba service provider, explain the situation and ask for help.

    Addresses and phone numbers, you can find on - http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/

  • Freezes during the boot process

    Hi, my computer is HP Pavilion Slimline s3300f desktop. Started to freeze during startup at various points all the time. And now if he charges upward it takes me directly to the Recovery Manager and it takes me to the Microsoft system recovery. Does that mean that my hard drive has failed? And all the lost data?
    And what should I do gel?
    Please help and thank you!

    Hello mastasergio,

    You have a few ongoing issues.

    A system is damaged and must be reinstalled. The hard drive is probably fine, however the data on the hard drive (OS) are not. Run the system recovery and recover your computer in a State of system costs.

    If you were not backup your data, it can be lost.

    What you need to do if you were not backup your data is to remove the hard drive of the computer and add it as a slave on another computer disc. Copy all the important files on the hard drive and save them elsewhere temporarily until you can reinstall the operating system on the HARD drive.

  • Slowed down during the rendering process - 770 GTX GPU

    I am a file - this is a PSD with animated layers (position, opacity) with video overlays - totaling a little more than 2 minutes. Before I got the velociraptor hard drive 10krpm, it took 11 hours for export. Thinking that it was the hard drive (which was probably a big bottleneck even when problem) I had a new one just for this.

    After obtaining my project on the velociraptor and set up as a working drive, I started to make the same file again.

    It's happened for 4 hours, with the GPU sitting idle (0%), but its use is to 1867 according to my GPUTweak software memory.

    Reading of mercury for the project is set to GPU. Whole reason I got a higher end video card is for the first use the GPU to accelerate the process, and it doesn't seem to be the case.

    by "rendering", I mean I have red bars in the upper part of the chronology, break-in numpad in a hurry.

    * Edit * after a strike at this point, my rendered file and I waiting over SOUL and results are the same - memory GPU used but no GPU

    Any ideas/suggestions? Is this normal?

    My system:

    I7 - 2600K @3. 40 GHz

    ASUS P8Z77 - V LX motherboard

    24 GB RAM

    ASUS GTX770 - DC2 OC 2 GB (with latest drivers)

    Seagate 2 TB hdd (OS and applications)

    Velociraptor 500 GB hdd (scratch, media release)

    Windows7 x 64

    all programs adobe updated to 2014 CC

    The maximum dimensions made me think on the number of tracks - there was no mention of tracks max in the article dimensions Max Mine had many trails, who sat to an opacity of 0% of layers.  So I had indicated to do a cleanup, to see if I can squeeze little speed this way.

    My primary sequence was of 36 titles, nested in another sequence with more than 4 tracks, and one of these titles has been nested has 6 tracks more... I deleted all the stuff opacity 0 to condensed my time line, by removing the used. I got the 36 tracks up to 20, and...

    BAM! 3 minutes to make! on the machine that took more than 8 hours. The problem was I was too sloppy with all pose and must have exceeded a limit of the track.

  • Satellite A100 falls down during the video capture in first 6

    Hello!
    I have Satelite A100-153 - PSAA9E (DuoCore T2300 with ATI X 1600) and I'm trying to capture video (Premiere 6.5 of DV camcorder via firewire).
    Whenever I get bluescreen reportng PAGE_FAULT_IN_NONPAGED_AREA
    ativvaxx.dll - address BFDOF9F9...

    Anyone know what could be wrong? It is quite new instalation original (from recovery DVDs) with only Adobe Premiere 6.5 installed.

    All the best,
    Tom

    Hello

    I don't know if it will help you, but I found a useful Toshiba document on similar problems.
    Please check this:
    "By running Adobe Premiere Elements 2.0 laptop freeze or crash.
    http://support.toshiba-tro.de/KB0/TSB6401FS0007R01.htm

    Please post again if you have solved.
    concerning

  • Smartphones from blackBerry Desktop Manager falls down during the synchronization of outlook calendar

    Today only has what is going on has begun - BB8320 synchronizes very well until the moment of synchronization of calendar (outlook 2003) I get this error message

    AppName: desktopmgr.exe AppVer: 4.2.2.14 ModName: ilxolk.fil

    ModVer: 5.5.1.246 Offset: 00060c 03

    have you tried re - start (laptop and phone), have the modified sync settings, but always crashes at the same point - form 23 of the 35 records.  Someone at - it ideas?

    Well, if the sync has gone well, you must have in your blackberry 22 items. Maybe they are stored in chronological order?
    Anyway, 22 out of 35, which means that there are more than 7 events that can cause the problem. just wipe everything and re-create them then!

    For the reason for the bug... here is maybe something at the event? an attachment, a special category...

  • Animate edge falls down during the collage

    Hi all

    I use Edge animate 1.5. Until today, the experience has been great! Today, however, whenever I try to paste or duplicate something, I get the message "an error has occurred."

    Can someone help me?

    Thank you!

    Hi, Andrew.

    I was able to reproduce the bug on my side.  The good news (for me), it is already fixed in the latest version of Animate.  It happens also on Mac and Win, then you are probably impossible to escape.  That being said, there is another way to do exactly what you want to do: copy your item from your components panel or mounting and right-click in the same pane.  Select "paste special" > "Paste it all."  Your active and all transitions will be pasted as if you had selected "duplicate".  I just confirmed that the accident does not happen in this case.

    Thanks for the presentation of a report as detailed - it really helped to be able to reproduce the problem on my side.  I hope that the solution is simple enough to use in daily work.

    See you soon,.

    -Elaine

  • File InDesign CC falls down after a first action...

    Hi, I have an indesign files that opens but hangs at end of every act, (sometimes after just to scroll or copy paste).

    I worked 10 hours on the file and have a deadline tomorrow morning.

    I can't do an idml file as the file falls down during the packing process...

    Any idea?

    TNX!

    INE

    In fact, I think that IDML is more likely to help. See remove minor corruption by exporting

  • STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

    My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

    I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

    Error during the extraction process. Details of error: path not found

    I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

    You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

    If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

    You also will not start in any kind of Mode safe no more.

    Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

    Windows file protection could not initiate a scan of protected system files.

    The specific error code is 0x000006ba [the RPC server is unavailable.].

    Failed to start the RPC mode server safe either.

    I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

    There should be a backup copy of rpcrt4.dll already on your system, here or here:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

    There should be a backup copy of rpcrt4.dll already on your system, here or here:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

    Do you have a Hiren BootCD you can download here:

    http://www.hirensbootcd.NET/

    On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

    Direct HTTP mirror + Torrent, Torrent Magnet

    Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

    These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

    Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

    There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Maybe you are looking for

  • NB 300 power connection

    Recently noted that the connection of the power cable to the NB300 begins to waver a bit. Not sure if this happened at a time or a design flaw. Battery still fresh on the connection but I'm not sure that this could be a problem of warranty or somethi

  • Qosmio G15R get stucked

    Hello I bought QOSMIO G15R about 1 year and I have a very strange problem.I use Windows XP Media Center 2005 and my computer get stuck without no reason. He just get stuck and you need to restart the computer again. You cannot use the computer for 10

  • WiFi missing in Airplane Mode indicator

    I have an iPhone iPad Air 2 times running iOS 9.2 and 6. On the iPhone, if I turn on airplane Mode and then back on the Wifi and Bluetooth, I see the appropriate indicators. On the iPad 2 air, that's another story. Even though I am connected to wifi,

  • Subwoofer Idepad Y550?

    Hi all I use a Y550 6 months already, and I am very satisfied with the machine. However, there is a feature that I have not been able to use with Windows7, it's the subwoofer. With the original installation (Vista 32) I found this Home Theater button

  • Microsoft silverlight

    yesterday I went on skygo to watch tv and I was told I had to download/update to update silverlight to watch. I downloaded 7 times and still nothing. I was wondering if anyone knows how I can make it work again, or if there is a problem with silverli