index problem

I created a new site where I created a version of the Tablet and a version phone... when I exported it in the HTML code... it created separate index's for the Tablet and phone version... now when I open the site on chrome... I was unable to check the version of the tablet or version phone... so I installed google chrome app known as mobile reagent tester... and when I opened the site on the tester... I have not seen the phone version... is to open the desktop version... I dunno what to do now... I have to open the index of the version phone? If Yes... How can I work combine the versions... for that my client is not facing any problem...

I guess you used these updates by replacing, instead of (somewhat) sensitive design?

Which is a very good approach, don't get me wrong on this :-)

These separate index html files are stored in special folders in the main HTML file. You can try to open them in your browser and take a look at them. But from the general index of HTML files, scripts embedded in this page are difficult to be "deceived" by referring to other index files. This passage is only 'live' on real and appropriate devices.

Tags: Adobe Muse

Similar Questions

  • Spotlight indexing problems

    I cleaned files on my hard drive - re-filing of certain documents (pdf files) rename photos - adding text says pictures of things like that.

    Have had occasional problems with gel - startup etc - that only seem to happen after a cleaning.

    By checking newspapers led to a finder error - saying his flight, or a job did not finish before the closure.

    Never really used it yesterday and it deleted all the files the search-, but if it ends up falling on indexing - or anyway to clear it.

    I was wondering if the problem is that indexing never delete old stuff - maybe the problem after snow leopard from is that the re-indexing after each update is in fact eventually causing an overflow (leak) because the size of some user data was not provided (or someone to pull).

    I'm on snow leopard on a Mac Pro 2008.

    Update on this problem...

    If you are looking for articles on how Spotlight indexing problems - other sites of mac users - OSXdaily, for example - to have discussions on this topic, including advice on how to use a statement in a terminal to turn it off completely - the problems are similar to those that I have - then it's perhaps a question that has not been reported to Apple.

    My problem seems to be a combination of chaining a large number of files and moving them - combined with Time Machine.   I have restore a plu Time Machine folder which contained 1200 small pdf files - which lost some how because of permission issues when I moved them.    As well as readonly files I could not restore them unless I put them in the box and then changed all the permissions read and write.   The older folder was actually the first time machine upward when the main folder in question had been copied from the CD for the office (he gave no permission to write to the subfolders in the main but to load data)

    My time machine is now stopped and I ejected the drive until I decide how to restart backup.

  • Indexing problem

    I'm running a state machine in a loop and wish to record the errors that occur and diplay on the fron Panel. Because there are many caases and many mistakes possible I want to make sure that all is displayed something like the following.

    Error of gain coefficient

    Setpoint error

    Response error

    etc, but my problem is that the table of errors only displays an error message and replaces it if another error occurs. I thought that indexing would allow me to 'stack' errors so I see all erros that occurred during my test. The "case"TRUE"in the right lower structure case does nothing with the CR. Any suggestions?... Error writing to a file would be easier?

    No, no, no. You must pass in the table since the shift register. An entry in the table build is connected to one and the other input is connected to the error.

    Have you taken the LabVIEW tutorial or resembled any of the examples? An example that illustrates an instruction box with a shift register and table construction is called "separate table values. It is listed under Fundamentals > tables and classes.

  • Function Index problem.

    Hello

    I have a problem regarding a function function index.

    example:

    TableName: Test

    Column: A, B, C, D

    I create the index on the table, column, a test using a user-defined function.

    If I do a select on the column, he'll be fine. In other words, I'll get the results you want.

    However, if I insert in the table and validation, and I do a query using the 'A' column in the where clause. I don't have any query hits. Its really weird.

    Have you ever experienced this problem? and is there an index of function according to back and donts w.r.t.?

    Thank you.

    MichaelR

    If you use a deterministic function really, it works:

    create or replace function test_fn (p_number number) return number deterministic
    is
      vreturn number := 0;
    begin
      if p_number = 1 then vreturn := 55; end if;
      if p_number = 2 then vreturn := 89; end if;
      return vreturn;
    end;
    

    Or, if you reverse the order of your second inserts (insert the folder before the recording of test1 test2) - it works fine.

    The reason why you get no results is when you insert the file test1 with a = 2, Oracle executes the function and gets no data, so it assumes that the result is NULL and puts in the index. You said Oracle function is deterministic, so he starts from the principle that any time test_fn (2) is called, it retrieves a null response.

  • z-index problem (I think)

    Hi all

    I have a simple image (x 6 photos) click swap. I have 3 columns, left and Center with the image swap and they work fine, but the right column I can't make it work. I suspect that maybe it's the z-index?

    Would appreciate someones help please.

    HTML

    "" "" < div id = "imageContainer-right" > < img class = src="templates/horme2/images/andrew_balemi_1.jpg 'active'" alt = "01" width = "388" height = "306" / > < img class = src="templates/horme2/images/andrew_balemi_2.jpg 'active'" alt = "01" width = height '388' = "306" / > < img class = src="templates/horme2/images/bruce_fergusson_1.jpg 'active'" alt = "01" width = height '388' = "306" / > < img class = src="templates/horme2/images/bruce_fergusson_2.jpg 'active'" alt = "01" width = "388" height = "306". "" > < img class = 'active' src="templates/horme2/images/lindsay_hooke_2.jpg ' alt = '01' width = '388' height = '306' / > < img class = src="templates/horme2/images/peter_hargreaves_3.jpg 'active' "alt ="01"width ="388"height ="306"/ > < / div >

    < / div >

    CSS

    {#imageContainer right

    Width: 100%;

    height: 306px;

    position: relative;

    overflow: hidden;

    }

    #imageContainer-right img {}

    position: absolute;

    top: 0;

    left: 0;

    z index: 6;

    cursor: pointer; cursor: hand

    }

    {img.active #imageContainer - right

    z-index: 1;

    }

    jQuery

    < script type = "text/javascript" >

    var imageObject = {}

    clickSwap: {function (obj.)}

    {obj. Click (Function ()})

    London var = $(this) .children ('img.active');

    activeImage.removeClass ('active');

    If (activeImage.next () .length > 0) {}

    activeImage.next () .addClass ('active');

    } else {}

    $(this).children('img:first-child').addClass ('active');

    }

    Returns false;

    });

    }

    };

    {$(function()}

    imageObject.clickSwap ($('#imageContainer-right'));

    });

    < /script >

    Thanks for the reply Nancy O,

    I have solved the problem, I was using the class "active" to all images when it should appear on the first frame.

    The site is now on a test server, would appreciate your thoughts, please go here: Homepage

    See you soon

  • index problem with regular letters

    Illustrator applies the effect index only to numeric characters, for example 1,2, etc.. But it does NOT apply it alphabetical characters, for example a, b, c etc. I observe that using the default Myriad Pro font, as well as the other fonts.

    How can I request letters exposing to regular (not only the numbers)?

    p.s., I use the menu Ctrl + T, and then go to the OpenType tab and select index under positional parameter and observe the above problem. I'm doing something wrong here?

    Thank you.

    Character Panel > sidebar > index. Works very well. Just tested.

  • z-index problem

    I'm having trouble with menus that appear in front of my enlarged Lighbox images. Please visit this page for example:

    http://www.taikodrum.com/about.htm

    I made sure the z-index is lower for the menus as it is for the light therapy device. I hope that someone here might be able to let me know what I missed.
    Thank you

    Maria Grist

    Ok!. Having found the cause of the problem. Take a look at line 109 to 111 of the p7PMMscripts.js and you will see

    P7_PMMremClass (TM, 'p7PMMnoscript');

    tM.style.position = 'relative';

    tM.style. zIndex = '999999';

    Lowering this value, or better yet, increase the value of z-index of the light table to 1000000

    GRAMPS

  • CS4/JS: generate index problems

    Hello scripters.

    In fact, I have a problem with the generation of my index finger.

    The index already exists, the only thing to do with the script is to generate and place.

    When you run the script, I get the following error message:

    invalid parameter line: myIndex.generate (myIndexPage, [myY1, myX1, myY2, myX2] myLayer, true, true);

    function generateIndex() {}
    myIndex = myDocument.indexes var [0];
    var myMasterSpread = myDocument.masterSpreads.item("A-Mustervorlage");
    var myIndexPage = myDocument.pages.add (LocationOptions.AT_END, myMasterSpread);
    myLayer var = myDocument.activeLayer;
    var myBounds = myGetBounds (myDocument, myIndexPage);
    var myY1 = Math.round(myBounds[0]);
    var myX1 = Math.round(myBounds[1]);
    var myY2 = Math.round(myBounds[2]);
    var myX2 = Math.round(myBounds[3]);
    myIndex.generate (myIndexPage, [myY1, myX1, myY2, myX2] myLayer, true, true);

    }

    I checked all the settings, they're right.

    What else could be wrong?

    Thanks in advance for any help.

    Hi Franziska,

    You must define a place point with an array of two values instead of geometric with an array of four values limits - as you did:

    var myStory = myIndex.generate(myIndexPage, [myY1, myX1], myLayer, true, true);
    

    This generates a new history of the index.

    Later, you can do something with the textContainers of the new history of the index (for example to specify geometric limitations).

    Martin

  • Tunnel of automatic indexing problem

    I have a data acquisition program that uses an Auto-Indexed Tunnel in a loop to process and display data in a table 1 d.  The program behaves strangely with the first value in the array (the point where the program worked, in a few seconds).  13 other values in the table all correct update, but the value of time always shows approximately the same number.  The loop is scheduled to update the front values once per second.  If I use a table outside of the loop Index block For to get the value of time out of the matrix, I get the correct value for time increments upward by about a second each time that the loop runs.

    So basically, when the value of time is passed through the auto-index Tunnel, its output fluctuates up and down a few tenths of seconds each time the loop is executed (remaining to a single value... usually about 90, even if it changes each time I run), instead of starting with 0 and increases with time as the summer running program.

    I'm under LabVIEW 8.5.1

    Thank you

    Sam

    Because I have no data acquisition installed, I can not tell what is the size of the array is, but if it is greater than 14, the later elements overwrite time because 0 is also the default value. For safety, I add another case (empty) (e.g. - 1) and make it the default.

    A lot of things very unwise, for example in the dataHCC.vi 'calculate', you add an empty array in the table. This really does not something useful, right?

  • Min array index problem.

    Hello everyone,

    I want to take a trigger pulse data that only my trigger pulse takes the form of square wave. For that I am taking the min and max markings table. When I use this pellate, it does not index table min correctly, it gives the worng number. Could you please see the attached Vi and data, check the value of the minimum index and suggest me how to get the minimum index of the true picture?

    Is there a reason that you need 2D table, because samples are only in a single column? Attached to what a possible solution might look like in 1 d

  • Windows Experience Index problem: could not measure the performance of video playback

    My pc is not yet rated. When I click on rate appears on this computer, a msg error saying that Windows Experience Index for your system could not be calculated, could not measure the PERFORMANCE of VIDEO PLAYBACK. What should I do. Help, please

    Hello

    Here are a few things to check before launching performance index Windows (WEI).

    • Quit all running programs, and restart the computer before running the assessment (WEI).
    • Check with the manufacturer of the computer or the motherboard manufacturer for BIOS updates.
    • Make sure you have the latest Windows 7 compatible drivers for the graphics device installed (video card).
    • If you have any third-party media players installed, uninstall them until the end of the evaluation of the WEI.
    • If you have installed any third-party Media Codecs, try to uninstall them until the end of the evaluation of the WEI.

    Open Windows Explorer and navigate to the folder C:\WINDOWS\Performance\WinSAT .

    You should see the following 8 videos.

    2 files with .mp4 extension.

    3 files with the .mpg file extension.

    3 files with .wmv file extension.

    Double-click each of these files. They should open and play in Windows Media Player. These are the files that WEI runs video performance.

    One thing to remember is that the WEI score is only an indicator of the ability of the main components of hardware on the computer. It has no effect on the performance of the system.

    Tell us what you find.

    Concerning

  • Index problem Z

    Hi im trying to understand z index and I can not make it work, why I do not work?

    Adobe Creative Cloud

    Hello

    You have code errors:

    Your file revised: Zindex revised.zip - Box

  • Verity indexing problem

    Hi all

    Can anyone help with this one. We lack CF5 (migration to 8 soon, so please do not laugh). However when we re-index our current collections, it takes a few seconds and comes back with no errors. I tried this via the CF Administrator and in the CFINDEX code that has worked very well for more than 4 years. It now does not seem to acknowledge there are all the index files.

    Just FYI, we have about 10 000 topics so far from the limit, we are also installed on Unix. I was check the permissions for the 'person' user and it seems, I don't know how it would have changed without manual intervention in any case.

    It works on our development server, but it is not in production.

    Any thoughts?

    Kind regards

    Paul Pounder

    Solved.

    FYI for future ref: was about 100% space in /var/

    Here Coldfusion would be wrong and let us know this well. I hope that the 8 will be better.

  • ALTER INDEX problem

    Hello

    Someone has modified the table and made Index unusable. How to make it usable again?

    ALTER INDEX 'REP_ODI35 '. "' AK_COL ' UNUSABLE;

    Kindly help

    Thank you
    Concerning
    Gatha

    Hello

    rebuild your index...

    ALTER index index-name rebuild

  • Table formula node indexing problem

    Hi, I was wondering if someone could explain the behavior of this VI please? Is this a bug?

    high = indicator 4

    low = indicator [4,4,4]

    These two directions; It is only the third element of the input array.

    However, I also get:

    average indicator = [0,0,0]

    Why is this?

    Thanks for any help!

    Do you have applied the latest hotfix to LV12SP1?  A similar issue has been set here.  I applied the patch and got the expected result.

    Try to change the 3 to a control constant to stop all the constant decline and see what you get.

    Edit: Solution AC Jeff probably does not work as described.  You must only ask HQ to one branch.

Maybe you are looking for