India - problems of signal/SIM?

Similar Questions

• Problems with UAC, Sims 3 downloader and original windows

  Problems with UAC, Sims 3 downloader and original windows

  I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store.  I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate.  I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game.  I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)?  Can you help me?

  Hello

  Method 1:
  Right click on all of the files and select run as administrator and try to install it.

  Method 2:

  You can try creating a new user account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Note: select the Administration option while creating a user account

  Method 3:

  You try to run the system restore at the same time that it worked very well.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps. Get back to us with results

• Problem, the signals and Slots

  Hi, as I posted in one of my other posts I have following problem with signals and messages and would be nice if someone could clarify anything that I don't seem to be able to find what the problem of the outputs.

  I have the code:

  void MYNetworkClass::requestFinished(QNetworkReply* reply)
  {
  
        // Check the network reply for errors
        if (reply->error() == QNetworkReply::NoError)
        {
           // read response
           const QByteArray response(reply->readAll());
           qDebug() <<"Response: "<< response;
  
           JsonDataAccess jda;
           QVariantMap results = jda.loadFromBuffer(response).toMap();
  
           QVariantMap data = results.value("SomeData").toMap();
  
           emit signalSuccess(data); // I reach here .... 
  
  // however actually when I click "Step Over" in debug mode, and try to exit the function// afterwards I get such "error" saying: No source available for "QMetaObject::activate() at  0xb9668da7" - highlighted in red.
  
       }
       else
       {
           qDebug() << "\n Problem with the network";
           qDebug() << "\n" << reply->errorString();
       }
  

  In MyNetwork class I also added the definition of signal in the header file:

  signals:
  
      void signalSuccess(QVariantMap result);
  

  Now also when someone calls an object MyNetworkClass method which calls requestFinished,.

  I want to catch the signal which is emitted by the requestFinished - as shown above.

       MyNetworkClass *network = new MyNetworkClass();
  
      QMap params;
      params.insert("username", userEmail);
  
      bool res = QObject::connect(network, SIGNAL(signalSuccess(QVariantMap)), this, SLOT(SomeSlotForSignal(QVariantMap)));
  
          Q_ASSERT(res);
      Q_UNUSED(res);
          network->makePostRequest("Login");
  

  My problem is that the SomeSlotForSignal slot never is called... (even if the signal is issued constitute requestFinished method and as I stated SomeSlotForSignal as a crack in the header file...) What can be problem? Any help? Thank you.

  I guess I solved the problem.

  The code I presented previously registered function

  F of a class B:

   void B::f()
  {
  MyNetworkClass *network = new MyNetworkClass();
  
      QMap params;
      params.insert("username", userEmail);
  
      bool res = QObject::connect(network, SIGNAL(signalSuccess(QVariantMap)), this, SLOT(SomeSlotForSignal(QVariantMap)));
  
          Q_ASSERT(res);
      Q_UNUSED(res);
  
  network->makePostRequest("Login");
  }
  

  Then the function f is called to:

      B object;
      object.f();
  
  The problem was I think that when the server responded "object" was destroyed from the stack. When I replaced the above code, with 
  
       B* object = new B();
      object->f();
  
  I think it works now......
  

• Second Signal SIM issues

  In my office, BSNL signal strength is very low or zero. What is happening, because of the long period, there is no signal, a red triangle is are displayed instead of the intensity of the signal. Even when to move to the area and full signal at my home, phone will not get the signal, I turn off and turn on to get the signal.

  I think it's a problem with BSNL. This only happens when using BSNL sim(3G/2G). I tried to use Airtel.There were no grave signal and he was very coherent. If you don't get the internet connection, try to activate the wifi hotspot and so it triggers your cellular data. It worked for me. After a minute, disable the hotspot. Now turn off and then turn on the mobile data settings (do not in the menu of data usage).

  Another option is to do the following: GO to settings-> settings-> BSNL Dual sim-> mobile data-> Preferred 2G network. Use 2G for a minute and then return to the settings and change the favorite to the 3G network. It should work fine.

  Here are some of the temporary remedies for this problem. There is still no rail to solve this problem.

• 'Insert SIM card' blackBerry smartphones and SOS signal - sim and signal error

  Hi, this is my first post so bare with me

  My 9000 "BOLD", which ive had for a lil and now has decided to not give a signal more or even accept my sim card.

  Ive tried a complete cleaning of the handset (and I backed everything up), remove and reinsert the sim card and the good old battery pull but nothing works and the problem is still there.

  my phone is locked to t-mobile and I contacted them to help my problem, but they were dog-disorder absolute!

  What do you think I should do here?

  Thanks in advance

  If your phone don't like your SIM card and won't give you a signal, you should look into getting a phone that makes.

  If you are still in your warranty period, you should walk to your carrier for a replacement.  However, before doing so be sure to do a backup via Desktop Manager.

• problems of Pro Sim for Apple 9.7 iPad

  Good evening

  I tried to use my Apple Sim, but unfortunately, it won't work, the iPad can not find all the suppliers.
  Despite that, I am in a larger city.

  The Tablet has a signal, at least I can see the iPad GET is a signal.

  What could be the error?

  Location: Singen, Germany

  Operating system: ios 9.3.2

  You said that the iPad got the cellular signal. Whose cell signal carrier you want to see? If you type settings - mobile data - configuration... do you think any cellular carrier?

  Where did you buy the iPad Pro to? Take a look at this Use Apple SIM with WiFi + cell of the iPad - Apple Support models

  Germany: DT (DT stores): Apple's built-in SIM is locked to DT in Germany.

• iPad2 and problem with the SIM card after update

  even after the 9.3.1 last updated continuously having problems with SIM TIM card network.

  I changed and I tried with another SIM card but the problem remains.

  I did have all those problems with 9.2.1.

  Apple could intervene and solve these problems? Otherwise, I think it's better to make a return to the old 9.2.1.

  Thank you

  Do you see the network? and is it strong enough?

• Problems with signal followed during sampling of the signal

  Hello

  I'm relatively new to LabVIEW 8.0 and I'm having a problem with being able to monitor the signals that I am gaining two simultaneous analog signals.  I have the user to input the frequency of sampling and the length of the sample, and then I starts the scan, but when running the analysis, I don't see no result on the chart if the duration of the sample is passed, at which point all data comes.  Previously, I could see the acquisition of real-time data and I don't know what I've done since then have possibly that stop working.  I tried to introduce a kind of late for may allow the software to apply the data to the graphics, but I had no success.

  I have attached the VI of the data acquisition component.

  Thank you so much for reading this.

  Hello

  I suggest you try these two options:

  1. in each iteration of the while loop, add your data to the data of the previous iteration, IE use a shift register to create an Adrien to data that you have acquired. When you save the data in a file, read data from the table and not the current value of the waveform. You can read the data in the table by using a queue, or by using any simple method to pass data between the blocks.

  When you use a local variable of the waveform card, you only read the current value in the array, not its history.

  2. use a property of waveform graphs node to read the history of the ranking, convert the picture from picture to picture 1 d 2D using cluster of waveform ungroup functions and write to the file, click on "Save".

• Problem with signals TTL metering: confused with counting

  Hello

  I use a TTL of 0.2 Hz signal to synchronize two devices. I use a Usb-6210 card to count the pulses TTL. The meter goes off when it detects the edges increase. In my case, the meter was sometimes triggered at low altitude, which causes wrong results (see attached pictures, the TTL signal is sampled at 20 Hz and the dots represent an increment of the counter). How can I solve this problem?

  In addition, the cable that connects the TTL output was welded by myself, would that be a problem of bad contact?

  Thank you very much

  K-X

  What is the nature of the device producing the TTL trigger signal?  Is it possible, for example, that it could produce a 1 microsecond pulse (which might not be visible on your signal ground) that would trigger the meter?  You really produce a digital pulse (i.e. your something circuit which is 'on' or 'off' as opposed to 'product analog voltage in the range of 0 to 5 volts')?  Are there any other devices around that could produce the impulses that are "picked up" by your meter?  The cable connecting the TTL is armored pulse for the meter?  The shield is based at one end?

  These questions (and the previous) suggest that the problem may be 'electronic' rather than 'LabVIEW '...

• I have a problem with my Sims 3 game on my studio15 dell.

  OK, my mother made me a studio 15 Dell for my birthday in September. and I bought the sims 3 in June. and I wanted to wait to play on my studio 15 Dell. So, I had my laptop and now sims 3 dosen't work with my laptop. I went on www.canyourunit.com to see if I had the requermeints to play the sims 3, and it says I have no problems. Everything is purrfect on my laptop to play the sims 3, he said. The sims 3 is not working on my laptop. the game works well, but the picture is horrible. It is a black squares that make the photo look really bad and black squares are the graphics all blocky and chopped up to research. So I don't know what's wrong, help me please! ??

  Hello x0xave.

  Looks like the graphics drivers is a little outdated.  Go to Dell.com and go to their download section and see if they have the latest video drivers for your computer.

  If they do, download them and install them and see if it solves your problem. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Wusb600n problem: no signal is detected

  Hey I have a problem here, so I recently bought a wusb600n for my office because I upgraded my router and wanted a faster connection. so when I installed this wusb600n there is no signal detected. I did reinstall the wusb600n but nothing has changed. I have been reading forums and nothing has helped. so I called cisco and they did the exact samething, I did and was told that a senior technician will help me the next day, which is today. No appeal was so now im, ask for help once more. This version 1 of wusb600n. Maybe the transition between wusb54GC messed wusb600n? So please help.

  things I checked that day:

  clicked on properties of the wusb and it says its working properly.

  tried to connect to a network and no signal is detected

  wireless laptop works so you can't exclude that my router is the problem

  Thank you

  OK so I found what is the problem, it wasn't the wusb600n it was my firewall, zonealarm.

• Problem with signal sony z2

  Hello, I have problem with my Sony z2 that I have weak signal mobile after update to new android 5.1.1 build number 23.4.A.1.264

  Before the updates signal was better.

  @Izaaa

  You can't unless you use flashtool or xperiafirm, or contact your Local support

  If I were you, I would repair the phone with PCC

  software repair

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• Beginner problem Qt - signal clicked() button does not

  Hi guys,.

  I'm sorry to waste time of people with this problem, but it was my * beep * for a while and I really cannot proceed without assistance.

  Basically, I just try to hang a signal clicked() by a button. I've got the button instance, but the connect call returns false and the slot is not called when I click on the button.

  Here is the code:

  Class ApplicationUI: public QObject
  {
  Q_OBJECT
  public:
  ApplicationUI (bb::cascades:Application * app);
  Virtual ~ ApplicationUI() {}

  void GetButtonClickHandler();

  BB::Cascades:button * _getButton;
  };

  ==========

  ApplicationUI::ApplicationUI (bb::cascades:Application * app)
  : QObject (app)
  {
  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);
  AbstractPane * root = qml->() createRootObject;
  App-> setScene (root);

  _getButton = root->findChild ("getButton");
  Boolean result = QObject::connect (_getButton, SIGNAL (clicked ()), this, SLOT (GetButtonClickHandler ()));

  _getButton-> setProperty ("text", "Yes");
  }

  Sub ApplicationUI::GetButtonClickHandler()
  {
  _getButton-> setProperty ("text", "clicked");
  }

  ==========

  Default empty project template
  import bb.cascades 1.0

  {Page}
  {Of container

  Button {}
  objectName: "getButton.
  text: 'Get '.
  horizontalAlignment: P
  }
  }
  }

  Thank you very much!
  Paul

  Try adding:

  public slots:

  above this line:
  void GetButtonClickHandler();

  In addition, you can use the methods of the button directly, as
  _getButton-> SetText ("clicked")

  BTW, member variable is not really necessary. Slot sender() method can be used to access the button:

  void ApplicationUI::GetButtonClickHandler(){  Button *button = qobject_cast(sender());
    button->setText("...");}
  

• Problems with the Sims game.

  FIRST OF ALL, AS FAR AS I KNOW I'M CAPPING CANNOT READ THE SCREEN HARDLY TYPE, BUT ANYWAY, I ME ASK WHY UR SIMS TURN 2 AND 3 NOTHING BUT ONE THING MONEY WE ALREADY BUY THE GAMES, WHY DO WE HAVE TO PAY FOR YOUR SITE? THEN WHY DO I NEED ORIGINAL AND GOOGLE CHROME ON MY COMPUTOR WITH WINDOWS 7 JUST DOWNLOAD STUFF TO YOUR SITE I HAVE TO HAVE GOOGLE CHROME SOMETHING I DON'T WANT ORINGIN AND I DO NOT SEE WHY WE SHOULD HAVE TO HAVE THIS ORIGIN BECAUSE IT SERVES NO PURPOSE WHATSOEVER, BUT TO ADVERSTISE WE CAN WE HAVE NOTHING WITHOUT BEING BOMBED BY ADVERSTISING CONSTANT , WHICH MAKES US WANT TO HAVE FUN WITH WHAT WE HAVE ALREADY BOUGHT NOT TO BUY MORE STUFF AND UR GAMES ARE TOO HIGH IN PRICE. ALSO, I HAD TO IMPROVE MY COMPUTOR FROM WINDOWS XP TO WINDOWS 7 FOR THE SAME REASONS I DESCRIBED JUST ABOUT GAMES. THEN I ME REQUEST WITH THIS UPGRADE TO WINDOWS 7 I CAN'T EVEN PLAY MY SIMS 2 AT ALL AND I SPENT ALL THIS MONEY ON EACH GAME EXSPANSION PACK AND NOW I CAN NOT EVEN PLAY IT AND IF U THINK I'LL DO THE SAME TO BUY ALL THE SIMS 3 ONLY TO HAVE A FEW YEARS U FIX IT SO I CAN NOT PLAY THEM OR IT IS JUST NOT WHO WILL HAPPEN IS RIDICULOUS IN MY OPPION ALSO I LOVED THE SIMS 2 IS BETTER THAN THE SIMS 3 CAUSE U COULD DO MORE IN IT AND I VERYILY CRAZY A TOOTH IN THE GAME SIMS 2 BEFORE IT WAS RIPPED RIGHT OUT OF MY HAND THROUGH CHANGES IN THE COMPUTORS AND NOW I HAVE ALL THIS MONEY SPENT FOR THE GAMES I CAN'T PLAY SAME U KNOW IT IS A GOOD WAY TO LOSE ALL SIMS FANS HEART AND GAME, PLAYERS. AND FOR THAT MONEY FROM THE ALMIGHTY DOLLAR WINS AGAIN GREEDY U U LOSE CUSTOMERS I AT 01:00 NOT TO INVEST ALL MY MONEY IN THE SIMS 3 WHEN I ALREADY DID IN SIMS 2 AND CAN'T PLAY AND MORE THAN HALF THE TIME DOWNLOAD MANAGER DON'T ME LET NOT ACCESS THE GAME EVEN WHEN WE CONNECT OR DON'T SIGN OR EVEN WHEN WE GOT THE PATCHES THAT WAS SUPPOSED TO OF THIS I SET AN ADULTS WHO LOVE PLAY SIMS TO RELAX AND I CAN'T BELIEVE AT THE AGE ADULT U ENJOY CHILDREN AS U DOING WITH UR ALWAYS PAY MORE AND MORE FOR WHAT WE HAVE ALREADY PAID TO GIVE US A BREAK EVERYONE IS NOT RICH OR DO WE CAN AFFORD ALL OF THIS? PLEASE EDGE OF UR LOYAL CUSTOMERS, THEY'RE NOT JUST CHILDREN U KNOW? P.S SHARON AS WINDOWS 7 DOES NOT SAY U NEED U FOR THESE GAMES, I'M PLAYING I ALSO SENT IT TO EA GAMES TOO. ALSO, I HAVE NO IDEA WHY WHEN U SELL A PRODUCT U NOT AT LEAST PUT INSTRUCTIONS ON HOW TO USE WHEN IT COMES WITH NOTHING IN ADD OR REMOVE, GIVING ARE WE SUPPOSE TO GUESS SUCH THINGS PLEASE HELP OR MAKE IT EASIER FOR CUSTOMERS OF HEART TO GET HELP HER SHIT I HAD TO UPGRADE TO WINDOWS 7 BECAUSE I COULDN'T NOT UPGRADES AND UPDATES IS NO LONGER FOR WINDOWS XP WHEN OFFICES IS STILL USING WINDOWS XP, WHICH GIVES I HAD BUY WINDOWS 7 AND I CAN NOT PLAY MY SIMS ON WHY I KNOW UR COMPANY IS AFFILIATED WITH EA GOOGLE CHROME AND OTHERS BUT STILL U SELL SOMETHING AND WE DO BUY MORE THINGS WHEN WE BOUGHT UR STUFF ALREADY IN THE FIRST PLACE TO RUN WINDOWS 7 ME UNDERSTANDING THIS?
  AND WHY I HAVE TO PAY MICROSOFT FOR HELP AT A PRICE OF $99.00 BECAUSE I GOT IT FOR HELP TO OVER 90 DAYS, WHEN I ALREADY BOUGHT THE WINDOWS 7 U HAVE TO PROVIDE FREE TO CUSTOMERS WHO BUY UR STUFF OR WE DO NOT WANT TO BUY UR STUFF MORE I SPENT MORE THAN A HUNDRED DOLLARS UPGRADING TO WINDOWS 7 AND I CAN'T GET ANY HELP TO RESOLVE THESE ISSUES ABOVE CUZ OF THE GREED OF HEART FOR MORE MONEY THAN U THINK CUZ YOUR COMPANY HAS MONEY GROWS ON TREES FOR THE REST OF US I MEAN U ITS SICK IF WE BUY UR PRODUCTS U SHOULD AT LEAST GIVE US FREE HELP TO USE THE PRODUCTS OR REFUND OUR MONEY I THINK SERIOUSLY TO TURN U ON BBB AND CONSUMER SOLVE THESE PROBLEMS AND STOP THE PUBLIC FLIGHT BE JUST UR LOYAL CUSTOMERS BEFORE SOMEONE SUES U CAN BE ME?

  Hello

  The question you posted would be better suited in the SIMS game support. Check out the link and ask the question.
  http://help.EA.com/en/the-Sims/the-Sims-3

• New Dell Inspiron 1764: Problems with signal low connection to wireless networks.

  I have a new laptop Dell Inspiron 1764 I received on 25 June. It is "replace" a Dell Inspiron 9100, who has learned to be too slow and too bulky for my needs. For the purposes of support, the two laptops are running on Windows 7.

  Overall, I love my new Inspiron 1764. However, I noticed the connection/signal strength seriously degraded, with wireless (Dell Wireless 1397 WLAN Mini card) card, compared to my Inspiron 9100 (Dell Wireless 1350 WLAN Mini-PCI card).

  In areas of my home that my 9100 can obtain the power of the complete signal (5 bars), my new 1764 bars 2 or less. This behavior is not as limited to only my house as I have tested in my work and in an area of less than 10 feet away from the wireless router, I have 'Internet connectivity problems.

  I tried twice this morning talk with Dell technical support. The first person I talked to tried to be helpful and initiated at least a DellConnect session with me so that he can check out some of my settings and such (However, why they went twice in my sharing settings I could not determine as they have absolutely nothing to do with the intensity of the signal).

  Unfortunately, I was disconnected from the session when I went to a place that had less signal than just next to my wireless router.

  I then go on the chat support with Dell and received another technician to speak with. I explained my problem, told them that I was in a DellConnect session with the other technician, and they looked to the top of my support contract.

  They then told me that my warranty does not cover software issues and referred me to the software Department and said it would be a supplement. I told them that I did not believe that it is a problem of software in any way, shape, or form. They told me that it must be a matter of adjustment. I spent several hours scouring the internet forums on Dell and other sites check those who have had similar problems. Some of their questions were certainly the software settings, but I still don't yet to find anything that tells me I have an incorrect setting of software.

  So far, I'm standing in my kitchen, tapping on my Inspiron 9100 with a full 5 bars, while my Inspiron 1764 is sitting next to me with a skinny 2 bars, and I am literally standing 7 feet above the room which houses my Linksys WRTU54G-TM router.

  Personally, I suspect a faulty wireless card, but how to convince Dell to hear my case and replace it instead of trying to bilk me for support of useless software?

  I hope Dell Tech Support bed actually this post, or people with the same problem can Dell refer to my previous post describing the problem and the fix.

  It IS a PROBLEM of MATERIAL WITH the ANTENNA, AND VERY PROBABLY THE DIFFERENCE BETWEEN a DECK CONNECTION at the ANTENNA of the PLATE, from connections TAPE FOIL INDIVIDUAL at the ANTENNA of the PLATE, THAT DELL MUST HAVE RESPONSE BETWEEN WHAT MINE PORTABLE has BEEN CARRIED OUT AND THE SPARE ROOM WAS MADE. THE PROBLEM IS NOT SOFTWARE, PROVIDER OR ROUTER, IT IS THE PLASTIC WITH THE ANTENNA CASE!

  Dell is in fact losing more money with the hours of technical support through software patches and sending technicians with new wireless cards that does not solve the problem. They need to send and replace the plastic case behind the LCD screen with the updating of antenna and connections.

  Good luck!