Indian version 5.1 comments

Similar Questions

• I have some pluggins I used in after effect 2014 CC and when I updated to the new version 2015, pluggins commentator does more work because they are not be updated yet, my question is how can I go back to the old version

  I have some pluggins I used in after effect 2014 CC and when I updated to the new version 2015, pluggins commentator does more work because they are not be updated yet, my question is how can I go back to the old version

  cc desktop application allows to install the previous versions.

  Here's how (about 1/3 of the bottom of page), download and install Adobe Creative Cloud apps

• is it an Indian version of firmware of e motorcycle?

  Once I had a problem with my bike e xt1022... Then I flashed a firmware version 21.12.40.condor_retaildsds.retaildsdsall.en.03 reteu... I want to know is it an Indian or any other firmware?

  YES I think it's the correct system version. Because I'm completely stock version and got official 4.4.4 in July that is never made no changes, rooting or bootloader unlock and I have the same version as in above the photos.

• How to move apps to sd in the Indian version of the note k3

  Pls someone tell me how can I move apps to the sd card in my note k50a40 k3... Everytime I open the apps in settings and open an app which is mobile like wikipedia there is no option to move to sd... New on lenovo M help pls...

  Goto settings - storage - click SD card option - phone will reboot, then your problem will be solved

• Feature Wifi and Blueetooth lost Lenovo Tab2 A7 - 10F (Indian model) running Lollipop 5.0

  I am a user of Lenovo Tab2 A7 - 10F of the India. Bought this three weeks back. It came with Kitkat, updated to lollipop without any problem. Bloatware rooted and deleted some. Subsequently removed 3 launcher and pushed Apex Launcher system. After completing all the changes I need, I cleaned the dalvik cache and restarted the system. My goal was to remove the root access which I already brought changes that I held. However, I forgot to open Kinguser and revoke access root. Instead, I went and cleaned dalvik cache and reset the tablet. Tablet starts fine, launched with Apex fine pitcher, but he lost two features namely; WiFi and Bluetooth. When I try to turn on those two, it fails to turn on. The toggle switch itself back immediately. I tried to reset the Tablet using default recovery (he is in Chinese, for some strange reason) but it produces the same result, the Wifi and bluetooth turn on again.

  Anyone faced similar problems? Anyone has any ideas how to fix this? If not, I guess that the option is to reinstall the lollipop or Kitkat again. If Yes, can someone send me the links where I can download an Indian version of default good untweaked ROM (Kitkat or lollipop). Also I would like to know how to install it. It would be better if there is an option to update the pacifier using default recovery itself, so that I can drop the ROM in the SD card and update. Also my recovery being in Chinese, it would greatly help if someone help me to identify the lines click to update by placed SD ROM

  Moderatorss can close this thread. I managed to flash the tablet with Kitkat and stick with it. Not too well rooted. So, the problem is resolved.

• How can I restore a PDF with comments, if I type 'no' by accident when Acrobat Reader DC asked me to restore at startup?

  Hi all,

  Unable to find an answer to the search...

  A pdf file with lots of comments and didn't #t record (big mistake - I know...)

  Acrobat Reader DC asked me if I want to revert to the version with the comments at the start. I hit not by accident.

  Y at - there a Posibility to include comments in the file?

  Thanks for your help.

  Best regards, Marcel

  Hi marcelf94056282 ,

  Here to inform that when once with changes in the document are not save & that you clicked 'no' option later, there is no possible way to restore any changes made.

  Kind regards

  Christian

• Comments from Windows 2003 Server x 86 hangs on 8 GB RAM VM

  The host is Windows 7 x 64

  32-bit version of Win2003 comments hangs during startup if more than 4 GB of RAM selected (even if the EAP is disabled), debugging the kernel via serial port shows he pause to ntkrpamp.exe (ie the NT kernel).

  the 32-bit version of host Win2003 R2 starts, but is very unstable (corrupt files and spontaneously crashes)

  the 32-bit host Win2008 version works fine with either EAP enabled or disabled.

  Tested on VMware Player version 12.1 and 7.1.3

  But even if you select less than 4 GB of RAM, installing the latest VMware Tools 10.0.5 Win2003 crash during the pilot HGFS install phase. Looks like you do not test even invited in 2003.

  It was solved by changing mem.hotadd option false in the vmx file. Why the hell do you have kernel patch on the fly to implement a questionable feature and not even test?

• Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments

  Hi all!

  I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspx

  But I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
  Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
  KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
  KdInitStatus value is "c00000b5".

  I tried:
  -change of hardware to 9 version
  -change the comments to e1000 Ethernet card
  -disable the DHCP (debugger comments must use APIPA)
  -change the type of connection (bridge NAT, host-only)

  and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
  But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.

  Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?

  Thank you!

  Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.

• Has anyone been able to Stand Up Essbase Analytics link (EAL) for financial management in version 11.1.2.2?

  Anyone no matter what chance standing places the link Analytics Essbase (EAL) for the purposes of financial management in 11.1.2.2?  We are at the point where when you click on 'Create the Bridge Application' it creates an application and a database in the EA and then blocks the Hyperion Essbase Analytics Link - Web Application Server.  Before this we were receiving an error NetRetry and NetDelay and increased, these parameters are do not receive the same mistakes.  I'm curious to know if 11.1.2.2 there's even a functional version of EAL or if we are out of luck until the next version.  Any comment is appreciated.

  FYI, we were able to raise the EAL and running after adding the following entries in the registry on our servers...

  Solution

  This timeout issue can be fixed by adding two TCP/IP registry settings, but first you must identify the customer who communicated with essbase when the time-out period exceeded so that you know which machine to add the settings.  If all the EAL and EMP components are installed on a single machine, while the machine would also host the client.  If the products are installed in a distributed environment, you determine the client machine depending on how the Essbase EAL server component is defined.

  The URL of the APS is part of the Analytics Server Essbase in EAL definition link.

  If (APS URL) value is "incorporated" means that the application EAL server communicates via the JAPI directly with the Essbase server. In this case the EAL AppServer is the client to the Essbase server. In this case, the following registry settings tcpip need to go on the computer running the application EAL server.

  If the value of (APS URL) is http://serverName:13080/aps/JAPI then the EAL Application Server communicates by way of Hyperion provider of Services (APS). In this case queries EAL proxies to and from the Essbase by APS Server. This means that the APS is the client to the Essbase server and registry settings tcpip need to go on the machine running Hyperion service provider.

  Once you have determined what machine acts as a customer of essbase, set the TcpTimedWaitDelay = 30 and MaxUserPort = 65534 settings via the windows registry.

  1. open the Windows registry.

  2. go in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TCPIP\Parameters.

  3. Add the new DWORD value named "TcpTimedWaitDelay.
  -Right click and select Edit
  -Select "decimal" radio button, type 30.

  4. Add the new DWORD value called MaxUserPort
  -Right click and select Edit
  -Select "decimal" radio button, type 65534

  5. a server restart is necessary.

• It's 2016, but find a hub USB 3 seems difficult.

  It's 2016, but find a hub USB 3 seems difficult.

  Guess I'm of an age where I need grandchildren to send a few years so that they can longer hold the technology of their grandfolks...

  Have spent time not a little online shopping for a usb hub powered to an iMac that reviewers find reliable and - this is the problem that I don't have the knowledge to understand - will support an auxiliary hard drive without cutting into the speed of the drive. I am a bit taken aback that people report problems of reliability and compatibility here in 2016, and even less accurate recreation the USB socket at the back of the iMac via a hub powered and wired to a few inches apart.

  Recommend a product?

  Very grateful.

  I have a powered hub Plugable (bought on Amazon). It's USB2 but I remember it being a USB3 version with reasonable comments.

  I think that people are more likely to write a comment if they have a problem so exams can be negatively biased a little.  I read the reviews, but I also analyze them.  A bit of any product may encounter problems for one thing, I'm looking for, that's how the company manages these products.

  Another thing to keep in mind is how the hub is intended to be used. If someone posts a bad review because they tried to load 8 iPads to a hub powered at the same time, well I think you'll be lucky to find a hub that can do.  Hubs can have many ports, but the power supply is usually limited and not designed to provide full amperage to all ports at the same time.

• Stock/Backup to XT1506 ROM

  Hey I have Moto E 2nd Gen 3 G XT1506 Indian Version, please give me a link for stock or backup rom!
  
  Thanks in advance

• Lenovo K3 Note: Lenovo Launcher Stopped Working

  Hi all

  My phone is Lenovo K3 Note K50a40 Indian version. I bought almost 20 days ago. The last 3 days, I have problem lenovo Launcher stopped . Launcher to work again, I erase settings lenovo Launcher, but it only works for 1 day. I also have FACTORY RESET the device settings but, once again, lenovo launcher stopped jumped message. What will I do to get rid of what I can't use this unit without erasing everyday data Launcher?

  Any help would be appreciated.

  Thanks in advance.

  
  

• Motorcycle G2 speaker during the call phone number

  My Motorola 2nd Generation (XT1068) Mobile running the Indian version of Lollipop 5.0.1 is facing problems after removing the helmet. While I can speak using the microphone of the headset and the phone's microphone has no problem and the other person can hear what I'm talking about. But I couldn't hear the voice of the other person the listener or speaker mode. If I press the speaker, the speaker icon appears in the notification bar, but I can't hear a thing. So whenever I have to use headphones to hear the voice of the other person and its boring.

  I deleted the cache and data using app but DIN can't Dialer. The only temporary solution that works is to restart the phone. After restarting the phone, the headset works fine and I am able to speak and hear properly. But again, if I insert and remove the headphones to listen to music the listener stop working and I couldn't hear the other voice of people on a phone call. I also tried to insert the other helmets. I also tried remove headphones slowly helping din't either.

  I thought that the phone was still in the "combined" mode, but if I play song or a video of the Gallery/Media player or Google playing music or by the two speakers apps file manager in front work very well. And if I take off the helmet, the songs play in breaks of play music which means that there is no problem in the helmet and decision-making.

  Any ideas on how to solve this problem? This could be a hardware or a software problem?

  Factory reset solved my problem.

• I bought acrobat 12.0 pour windows, what is the download address. I find only references to Acrobat XI.

  My company has purchase acrobat 12.0 (adobe acrobat format standard 12), I have a serial number with the invoice, but I can't find this product in the Adobe sites?

  This version exist? Comment do pour download it?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• looking for help on the script PowercLI.

  I'm looking for a script powershell group based vmsessions on the State of vmtools version so that I can plan the upgrade to version VMtools on virtual machines.

  Please use the below script and let me know if problems.

  Claire

  $logfile = "result.txt".

  $vms = «»

  $output = «»

  $temp =""

  $vm =""

  To connect to vcenter Server

  $vcenter = read-host "enter the vCenter Instance.

  to connect-viserver-Server $vcenter - WarningAction SilentlyContinue

  Get-Date | out-file $logfile

  echo "= details = | out-file $logfile - Append

  $vms = get-Content.\list.txt

  $output = get - vm $vms | SELECT name, vmhost, PowerState, version, toolsversion, toolsversionstatus, comments.

  | Tri-objet-property toolsversionstatus | FT - AutoSize GroupBy - toolsversionstatus-wrap

  $output

  $output | Out-file $logfile - append

  Disconnect-VIServer *-confirm: $false