indicate the value out of range

Similar Questions

• Monitor displays the error "out of range".

  Some games worked properly in 17-inch monitor, but doesn't work in monitor 15 inch, get the message ' out of range, H-30-60 Khz, V-50-160 Hz. My screen resolution: 1024 x 768 60Hz.The graphics driver is up to date. Is there no way repair it on Control Panel?

  Do a search for config.cfg and autoexec.cfg. They will very probably in the CS, Valve or your user folders for the account name. Rename them to config.cf_ and autoexec.cf_, and then start the game. That resets the audio, video and controller, so you will have to redo. Choose a lower resolution to front for your video, and you should be good to go.
  It was the suggestion that I found for half-life, when a friend had trouble with her years ago (it is also used Valve), so it can work for you, too.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• The index of the frame out of range

  I use Lynda SG training and becomes the first 01_01_interface example Frame index out of range. Files in Adobe Bridge are .mov and a rate of 23.976 which is what I put in the reading and editing-> Base frame rate in SG. I can load the files in first and they play normally in the timeline panel.

  Thanks to Robbie Carman for his great support on this issue. The resolution is to remove and reinstall SpeedGrade. I know, big hammer approach, but I didn't want to be down until the developers could watch and hopfully they know what triggers this error in their code and will come with a fix in a future update or release. It would be great to hear from Adobe if there is a more simple solution and a lot less time.

• my windows defender will not open or run. It indicates the time-out period has expired. Help

  an error code appears.  I can not download a new version because my vista comes with window cannot open security Defender.I either.  The time-out period has expired.  What does that mean?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Satellite L30-101: System indicates the value of memory bad

  Hello

  I hope someone can help. Just bought the L30-101 with Vista Home Basic and 512ram (ddr2 pc2 4200). The specs say it can take up to 2 gig with a max of 1 gig per slot.

  Site of Crucial ram and there memory Advisor tool used for a stick of compatible 1 gig to another location of the source and bought a stick of 1 GB (ddr2 pc2 4200). It was put in the laptop, but instead to show 1.5 GB of ram it showed only a little more than 900 MB - so he was recognizing the new stick and using a small part for shared graphics etc. but was totally ignoring the original 512 stick.

  I tried move but opposing slots always get the same result. Also tried the two sticks separately and work well on their own, but when the two haven't inserted the 1 gig stick seems to be recognized. Is this a compatibility issue?

  Ive tried to contact crucial themselves, but still have had no response, so thought I would try and choose someones brains here.

  Any ideas anyone?
  See you soon
  Nick

  Post edited by: silverback0001

  This is a compatibility issue, I think you should get a new memory.

  Sometimes it's a problem if you use different modules (size, brand, speed).
  Usually, these problems are presented if you have a noname memory.

  You must purchase another module of 1 GB instead of this the 512ram or replace the 1 GB with a new key.

  I've heard a user has how Kingmax and Samsung 512 MB 1 GB of ram in the L30 and everything is going well, he has no problem with him.
  I have two Samsung 512 MB modules and have no problem.

• How can I update the values out of while loop

  The LabView waveform chart updates every 0.1 sec.

  When a user clicks on a button, I want to LabVIEW to wait 5 sec and beep for 5 sec.

  Meanwhile, it should be to update permanently the wavefrorm graph.

  When I have the structure case inside the while loop, it interferes with the updates of the waveform graph.

  When I structure case outside the while loop, the structure of the case is never executed.

  What can I do?

  I thought about it using the example of design of producer/consumer model.

  http://decibel.NI.com/content/docs/doc-5404

  It allows a variable that is updated in a while loop to update outside the while loop while the loop is running.

• Unable to connect PS 2 to tToshiba 19W330DB TV - "out of range" msg

  PlayStation 2 for as much as I know only need the ypbpr lead to connect to the TV.
  I have connected the audio cables very well, but when it comes to connecting the video cable (yellow), it seems to be wrong.

  When you turn the console on the initial screen for playstation comes in black and white.
  The screen flashes then a little and the message 'out of range' appears.

  Someone at - it ideas on how to connect?

  Hello Laura

  Please don't be crazy on me, but this is the support forum for the Toshiba COMPUTER system. If you have connection problems Playstation 2 I recommend you contact the manufacturer of the Playstation support. They know how to manage with own product.

• Do not display on the indicator of the value of void / vi

  Right now I have a situation, where I use a subvi and try to connect an indicator to the block via the main program of VI. Somehow it is connected, but on the main VI main VI is not updated with the changes. It updates in the Sub - VI. Data, I just open the com port and allowing data to flow in (data can be seen high SubVI_frontpanel image) here are some pictures:

  Image: MainVI, façade

  

  Think of the data stream. Your Subvi won't end until you press the stop button, so the result will be not available in main VI until it happens.

  If you must pass the value out permanently, consider using notifiers or queues.

• LaserJet Ypou M1217: "Out of Range".

  I've had my HP fax/printer for 4 years now.  Two weeks ago it started to give me a message "Out of Range" whenever I try to send a fax.  It's okay if it's a local fax number or a long distance number, the message is always the same "Out of Range".  The fax test report checks very well.  I had Verizon test the phone line, and that's fine too.  I can receive faxes without problem, I can not just send a fax.

  Hi @DMRivera,

  I see that you have any questions, send faxes, you get the error "Out of Range". But you can receive faxes. I'd love to help you.

  Here are a few settings fax onto the printer, to see if it helps.

  Go to the key, the menu of configuration of fax, fax reception private installation, OK, receive, OK, turn off the power.

  Go to the key, the arrow to the configuration of the fax machine, all the faxes, error correction, OK, turn it off, OK.

  Navigate to the key, arrow fax installation program, OK, all faxes, fax speed, OK, OK, it defined on way, OK.

  If the problem persists, take a look at this document for can not send or receive faxes.

  Update the firmware of the printer by a USB connection. HP LaserJet Firmware Update Utility.

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Select the value equal to the table

  I use Dreamweaver CS5 with PHP and a MySQL database.  I'm reading from a table (states []) in the database that list all States an entrepreneur might work to, that is, WA, ID, OR... my record of the insert is savaing my table with the abriviations of State with the coma in the meantime without space, which is fine with me.  My code for the insert recording is:

  If (isset($_POST['states'])) {}

  $_POST ['States'] = implode (',', $_POST ['states']);

  } else {}

  $_POST ['States'] = null;

  }

  To test what must be my result, I tried to hard-code the value for area WA selection that selects the WA (Washington) very well in the dynamic list/Menu. The checkbox allow multiple selections is selected for this list/menu.  When I try to hardcode several States like WA, ID, nothing is selected.  I also tried selecting WA ID and WAID.  What is the correct format of the select value equal to in order to select multiple items.

  Once the coding is figured out I was going to try to understand how to navigate in PHP and do select dynamically recording and echo (or otherwise print) in the right format for several States in the table would be selected.  However, if anyone out there has a sample, that would be great.

  Thank you in advance for your help!

  Darren

  First and perhaps that I read it wrong, but 'implode' in your example should not "explode" because you have the array, but you want to get the values out of it?

  Now I know that my next suggestion is not what you want to hear, but I used to think like you and store things in a table, a table in a loop and then try to check the loop if some values exist.  However, as time has taught me it is not necessarily the best way to store values you need for this type of proceeding.  Most of the time in cases like this, your username will seek entrepreneurs in a specific State.  So what I recommend is to create another table with 2 columns:

  contractor_id (a way to identify the contractor, it will be a primary key, which will connect a key for the "contractor_id" in your original table)

  contractor_state (this allows to link an id to a State)

  A single loop would be to query the status of the contractor, the contractor ID is filled and you can run a join to remove the door contractor while the ID condition is met.  The flip side is to get all the contractor IDs meet the criteria of the State.  You must perform a JOIN on the request to combine the original with this new table table if you want to remove the name of the contractor as well as the State didn't give one example.

  Perhaps a good article that you want to read is the first response of this StackOverflow question and the link in the response are talking about standardization and serialization of data:

  http://StackOverflow.com/questions/1790481/PHP-MySQL-storing-array-in-database

• How can I get rid of frequency is out of range warning on my VPL-HS60 projector?

  I recently changed the lamp on my projector and when I turned it back on, I received this warning and now I don't have any picture (sound is ok). All the elements are connected with HDMI (receiver, set-top Blu - ray player cable Charter and projector). Prior to that, everything worked fine (only changed / bulb of the lamp).

  I also put the old bulb back in and it still does not work (as I suspected).

  One thing I noticed in troubleshooting, it is that I can not change the image or Signal settings on my projector. He said that it is not available (not sure if it was this way before I changed the bulb).

  Can someone help me with this?

  Thank you!

  I no longer get the "frequency out of range" warning (I got that fixed - I don't know how but I fixed it before see and try your suggestions).

  So now I can watch the cable TV with cable box set to 1080i. However, I can still watch all the movies of my Blu - ray player (again this used to work fine) - no image is displayed. I tried to adjust the video output from the blu - ray player at 1080i and 720 p with the 1080/24 p output BD ROM set to Auto or off function and it still does not (sound is ok).

  Any ideas or suggestions? Thank you!

• "The value entered does not Format of the field.

  If something similar has been posted, I apologize! I tried to look for it and has not been able to find the answer.

  I have a form to determine the potential savings, if a customer makes our products to a competing product. Our sales staff filling in many areas that allow us to determine the annual cost that the customer currently committed, as well as the potential annual costs associated with our product. At the bottom of the page, using a simple calculation JS, it determines annual dollar savings by changing brands.

  I would also like to include the annual savings as a percentage of current costs, but for some reason, I cannot get the script to work. The error message that appears indicates: "the value entered does not match the format of the field [annual percentage savings]."

  Now, the two fields referenced in my script are formatted in dollars, so I don't know if this makes a difference or not. My script is below.

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;
  var y = this.getField("Cost_Per_Year_Current").value;
  F.value = Event.Value / y.value;

  If (y.value < f.value) event.value = ";

  Given the percentage is not strictly necessary, but it adds to the form, so that any help would be appreciated.

  Thank you!

  Post edited by: MelissaZoller (format)

  I would use:

  var f = this.getField("Potential_Annual_Savings_in_Dollars").value;

  var y = this.getField("Cost_Per_Year_Current").value;

  If (y<= 0)="" event.value=''>

  else {}

  Event.Value = f / y;
  If (y< f)="" event.value=''>
  }

  In this way there is no division by zero or a negative number.

• Repeat the value of the column derived from formulas

  I need to repeat a value derived for a particular combination of column and line to all the rows in the table. However when I put the 'case' function it does not repeat the values I want. The value is displayed only in the line of 1at
  
  The formulas used are the following
  
  CASE WHEN D_MILLS.MILL_NO = 1 THEN (F_MILL_PRODUCTION. FN_YTD_CPO_PRODUCED/F_MILL_PRODUCTION. FN_YTD_CROP_PROCESSED) ELSE (FILTER (F_MILL_PRODUCTION. FN_YTD_CPO_PRODUCED/F_MILL_PRODUCTION. WITH THE HELP OF FN_YTD_CROP_PROCESSED (D_MILLS.MILL_NO = 1.00))) END
  
  
  Note: No. Mill is the Dimension user for the report on the ground that I have. and I need the value of the derivative for mill = 1 to be repeated for all the other mills (mill No. = 2,3, etc.)
  
  Published by: Shaz01 on August 7, 2010 01:45

  Hello

  Use the formula like this,

  Max (CASE WHEN D_MILLS.MILL_NO = 1 THEN (F_MILL_PRODUCTION. FN_YTD_CPO_PRODUCED/F_MILL_PRODUCTION. FN_YTD_CROP_PROCESSED) ELSE (FILTER (F_MILL_PRODUCTION. FN_YTD_CPO_PRODUCED/F_MILL_PRODUCTION. (WITH THE HELP OF FN_YTD_CROP_PROCESSED (D_MILLS.MILL_NO = 1.00))) END)

  You must also, for all values don't indicate the value of factory No 1, so no need of instruction box.

  MAX (FILTER (F_MILL_PRODUCTION. FN_YTD_CPO_PRODUCED/F_MILL_PRODUCTION. WITH THE HELP OF FN_YTD_CROP_PROCESSED (D_MILLS.MILL_NO = 1.00)))

  Thank you
  Vino

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...