Indicator output value resets all other sub time VI is called

Similar Questions

• BUG? Digital command resets all other entries with non-standard display format

  I found what I think it's a bug with a digital command on a non-standard display format.  I have the display format '% dW' value (an integer followed by the letter W).  When I enter a number, it works, but if I then pull together the same number, the digital command resets to 0.  This continues to alternate as long as I have to enter the same value - a single entry will be right, the other resets to 0.  LabVIEW 2009 SP1.  The VI didn't even need to run to see this behavior.  If I use a value change event I also see this - the 'New' value will be alternately 0 even if not what I entered.

  

  I had someone contact me about this today.  Just as a follow-up, this CAR has been set in 2011.

• Printer cannot print; There is a file in the print queue which will not allow delete and blocks all other files. It's called mtml: I can't print all the documents because of this barrier. What can I do?

  I can't print because a barrier print job is in the queue and refuses to move.  I try to remove it and it will not delete.  Its label as file mtml (mtml:A07448 - 1464-4478 - one...)    I plugged the printer off and unplugged and waited, but he still does not move.

  I was unable to delete the file in question.

• BB maps is paralyzed by ATT, all other cards that I can call him by program on "BOLD"?

  I inserted a MenuItem "display the location of the sender" display Email menu. I hope that when a user opens an e-mail and selects the location of the sender 'show' in the menu, it will bring BB maps and show the current location of the sender.

  However, BB maps did not appear and then I've debugged it on the "BOLD" device. (Define criteria and get an instance of LocationProvider) went well until it reached LocationProvider.getLocation(-1).

  Here is the code segment:

  System.out.println ("view our locations');

  try {

  location = provider.getLocation(-1);

  System.out.println ("get location");

  ..........

  } catch

  (LocationException e) {

  System.out.println ("could not get (LocationException) location:"+ try () ") ;}

  catch (InterruptedException e) {

  System.out.println ("could not get the (InterruptedException) location:"+ try () ");

  }

  Only 'show the locations' has been printed, but 'get location' has never printed. Feels like the thread stopped at the place = provider.getLocation(-1) and never returned.

  I've read a lot of online messages and seems ATT disabled and hidden BB cards to promote the browser. The trick of using non Att theme not working anymore. Several people have complained that their BB icon cards disappeared at the end of March 2009.

  That's why cards BB no-show in my application? Is there a way to fix this?

  Thank you

  Hua

  LWG is OK - BB Maps has nothing to do with LocationProvider.

  However, you can start programmtically than Google maps if installed, using the ApplicationManager interface. O check for both and prefer BB Maps, but allow the customer to select Google given that some people prefer.

  See this thread on the BB Forum a tip on this:

  http://www.BlackBerryForums.com/developer-forum/143263-heres-how-start-Google-maps-landmark.html

• Best way to reset all controls on the front panel except one?

  Hello world

  I have an interesting problem, whereby I need to run successive tests using a test station which has several indicators on the front panel. At the end of each test, I need to reset all to default values, with the exception of a control (Test ID) who needs to keep his information - its value is used in an initialization status for test to ask for information from a database, so it can not be reset with the rest controls.

  I post all orders at a time using a reference ThisVI and VI Default Vals.Reinit All method, but this will obviously reset my control values (Test ID) as well. Any suggestions on how to keep properly or may store this information control while resetting all others. I can reset individually others but there is a little and more can be added as this system is developed.

  I don't really know what is the right way to proceed, and Labview has maybe one trick in his bag that I know to work around this problem.

  Thanks in advance for your suggestions,

  Alex

  Flank the node invoke with two nodes in the value property of the control to maintain the value. To the left we read as well as a right and the wires together. Connect three nodes with a thread of error to establish the order of execution.

  First reading place value on the wire, which is then written after the values have been reset to the default value.

  

• How to reset all default?

  Hello

  Is it possible to reset all controls by default? I have searched here and someone suggest you use the "reset to Default values" in the Edit menu, it works for the value field. But to control the structure of the case, it does not work. Any other suggestion (without programming)? Thank you

  Place the same even invoke noeud knot on the digram of block, then right-click and select Select the method > VI Server > VI > VI.

  

  After that once again right click and select Select the method > default values > reset all make them default.

  

• reset all outputs the initial values

  Hello

  in our case, a project VeriStand is running on a machine RT with cRIO-I/O.

  Is there a possibility to reset all outputs to the initial value, while the project is running? (I don't want to restart the system in real time or deploy the project to new because who consumes too much time).

  Hello

  You can create an alarm that calls a reset procedure. The alarm can be mapped on a Boolean button in the workspace. Or you can call a Sequenze RT to reset your values.

  Best regards

  Philippe

• I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

  I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

  For your photos, try importing them to your computer and their synchronization then back to the SE.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  For your texts, they moved with the backup restore?

• After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting.

  connection problems on hotmail through msn

  After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting

  Hello richardcatchpole,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• How to copy an instance for all other sites at the same time?

  Hi guys,.

  Just a question regarding the copy. When I for example change a line of code in my site index.html I want it to be implemented in all other sites. So I open each one and do a copy / paste. Is there a method of automatic implementation without manually copy and paste to various sites one by one ' cuz it is entirely of your time? See you soon.

  For NEW material in your pages within this site, you must use FIND of DW and feature REPLACE - to the favicon, you can FIND a code in the header of the document that is common to all pages, such as "" and REPLACE by "" followed by your code for links.  For any other code, you will find a few common starting point and replace it with a server-side include that contains the new code or with the new code directly, according to what might happen with this new code will in the future.

• reset the date and time on Photosmart all-in - One 7510 C311a

  I need to reset the date and time when I send faxes.  These things are wrong on my Fax.  Can you help me find the place to correct the date and time?

  I did not change my system.

  No error message.

  My OS is Snow Leopard 10.6.8

  Hello

  1. On the Control Panel, press the Setup icon ( ), then tap Tools / Preferences.
  2. Tap the Date & time option.
  3. Tap your desired time zone. Set time is displayed.
  4. Press the arrow pointing upwards ( ) or the down arrow ( ) to set the hour and minutes.
  5. Tap AM or PM .
  6. Touch Daylight Saving if you are in a time zone that adjusts for daylight saving time.
  7. Press OK to confirm the time that you set.
  8. Using the numbers on the Control Panel, press the numbers for the current month, day and year and then press OK

• Read the output values after each step runs in the User Interface of LabVIEW

  Hi all

  Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1

  Problem: is there a way to run the following steps programmatically and get values out of each of them?

  I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...

  So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).

  As I mentioned I can't change Test sequences, I can not add a UImessages.

  What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?

  Thanks in advance for your suggestions,

  Best regards.

  When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).

  And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.

  Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.

  Hope this helps,

  -Doug

• I am able to install all other updates Microsoft except this one (Office XP (KB2289162)

  Thank you for your advice in this thread http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/why-does-security-update-for-microsoft-office-xp/fa6c7729-c772-e011-8dfc-68b599b31bf5 .  I have Microsoft Office XP Service Pack 3 installed on my coimputer and I am able to install all other updates Microsoft except this one (Office XP (KB2289162).  I tried your suggestion to turn off my antivirus and then install the stand-alone package.  However, it is still impossible to install.  This time, I receieved an error message referring to the lack of permission to make changes in Microsoft Office Small Business Edition (which is the version of Office that I have).  I don't know why this would be the case, since I have never had a problem with update of Microsoft Office in the past.

  If you or someone else has other suggestions, I'd appreciate them.

  Thank you.

  Hi Mike,.

  Thanks for the reply, the steps were actually written originally for Windows XP and are still valid. As you can see in the SubinACL download it is designed to work in all versions of windows. The indications in the thread (also posted here) should help you reset the permissions problem. Once again, the reason for which we do, it's because the update fails to install due to permissions on some files/registry values. Rather than browsing manually, then find the specific that does not respect these steps reset them to the default settings and must

  1 download subinacl.msi from following link and save it to the desktop.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4a91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b&displaylang=en#AffinityDownloads)
  2. on the desktop, double-click subinacl.msi to install the tool.
  3. Select as destination folder C:\Windows\System32.
  Note This step assumes that Windows is installed in C:\Windows. If Windows is installed elsewhere, select the path appropriate to \System32.
  4. open Notepad.
  5 copy the following commands, and then paste them into the open window of the notebook .

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  6. in Notepad, click file, record underand then type:reset.cmd
  7. in Notepad, click Save as type, and then select all files (*. *).
  8. save the reset.cmdfile on your desktop and close Notepad.
  9. double-click on the reset.cmdfile to reset permissions in Windows Update.
  Note This step can take several minutes, so please be patient. When permissions have been reset, you will be prompted to "finished, press any key to continue."
  10. Press any key to finish the installation.resolve this question.

• Find values for all variables

  Hello

  The Sub data, I want to find records where status = 1 and the values for all the questionnarie ($quest1 to Quest5) is other than 1, i.e. the value must be null, 0 or a negative integer

  Thanks in advance

  with t as

  (

  Select 101 as the nest, 1 as the status, "Cookie" as a term, 1 as $quest1, Quest2 0, 0 Quest3, 0 Quest4, 0 as Quest5 from dual union

  Select 102, 1, "Chips", 0, 0, 0, 0, 0 double Union

  Select 102, 1, "Chips", 0, 0, 0, 0, 1 double Union

  Select 102, 1, 'milk', 0, 0, 0, 0, null Union double

  Select 103, 0, 'mixture', 0, 0, 0, 0, 0 double Union

  Select 103, 1, 'sugar', 0, 0, 1, 1, 1 Union double

  Select 104, 1, 'sugar', null, null, 0, 0, 0 double Union

  Select 105, 1, 'the', 1, 1, 0, 0, -1 Union double

  Select 106, 0, 'milk', 1, 1, 0, 0, -1 double Union

  Select 106, 1, 'milk', -1, -1, 0, 0, -1 Union double

  Select 106, 1, 'milk', 0, 0, 0, 0, 0 of the double

  )

  Select * from t

  When status = 1

  Output

  NEST	STATUS	TERM	$QUEST1	QUEST2	QUEST3	QUEST4	QUEST5
  102	1	Chips	0	0	0	0	0
  102	1	Milk	0	0	0	0
  104	1	sugar			0	0	0
  106	1	Milk	-1	-1	0	0	-1
  106	1	Milk	0	0	0	0	0

  Select *.

  t

  When status = 1

  and nvl ($quest1, 0)<= 0="">

  and nvl (quest2, 0)<=>

  and nvl (quest3, 0)<=>

  and nvl (quest4, 0)<=>

  and nvl (quest5, 0)<=>