Inf for simple quotient value

Similar Questions

• Search for the text value data store

  Hello, I have a PDO of data to store, and I would like to search for a text value in a quantity of measure.  In each of my test series, there is a quantity of measure with the name TCNAME and stores the cell name of test in the string format.  I would like to get all the TCNAMEs that contain "TC4" for example.  Currently, I have to load TCNAME in the portal and display it in an array of string.

  Any ideas how I can do this?

  I assume you are using a PUMA testbed that stores this kind of goods on a unique value chain chains.

  There is no direct search method, so I guess that a script is the only solution we can offer.

  Datafinder you can search for the minimum and maximum of a channel. That would be too much work in the store of ASAM.

  "PDO / cpp"
  
  protected tcnameMQs: set tcnameMQs = store. GetElementList ("MeasurementQuantity", "name = TCNAME", true)
  
  protected tcnameMQ: for each tcnameMQ in tcnameMQs
  
    MsgBox tcnameMq.References ("local_columns"). Elements (1). Properties ("values"). Value
  
  Next
  
  ' AOP5 / Corba
  
  protected tcnameLCs: set tcnameLCs = store. GetElementList ("LocalColumn", "measurement_quantity.name = TCNAME", true)
  
  protected tcnameLC: for each tcnameLC in tcnameLCs
  
    MsgBox tcnameLC.Properties ("values"). Value
  
  Next
  
  

  I have added the example which should be the shortest path from my point of view. In AOP5, you can search LocalColumn and spend BA which is less overhead.

  It is perhaps a good idea to post-processing of the data base and crush the decription "Test name" by

  "The test cell name == NAME. You can search not post-processed by Searchin' for.

  protected tcnameMQs: set tcnameMQs = store. GetElementList ("MeasurementQuantity", "description = name of the test cell", true)
  
  protected tcnameMQ: for each tcnameMQ in tcnameMQs
  
    tcnameMQ.Properties ("description"). Value = "name of the test cell is" & tcnameMq.References ("local_columns"). Elements (1). Properties ("values"). Value
  
  Next
  
  Store.Save

  Thereafter, you would be able to search for it.

  Greetings

  Andreas

• How to search for items by value in Multisim?

  I have several caps 100nF in my diagram. How can other than to make a BOM, I get the diagram for just the value? So far, I get 0 results.

  Thanks for the help.

  Scotty544

  The search in Multisim search RefDes, not the value. However, if the version you have the spreadsheet component, you can select the value column (click on the header) and then click the sort Ascending or Sort Descending button to group all of the components.

  I also have a request to expand the search to include the value and other data.

• Filter for a specific value object type

  I would like to know if the documents loaded on an object type can be interrogated for a specific value. For ex, I wanted to fetch all the records of the emp and load it into an object. I wanted to ask the object out of the loop to query for a specific deptno. I understand a query simpe SQL would be much faster in the scenario below, but the report itself used in our system uses several tables and some of them have millions of records from different sources as accounts suppliers, accounts receivable, accounting, etc. and they are treated differently for each source before that the result will be published the report. I took the table emp for example and wanted to know if the type of object can be queried for a specific column outside the loop.

  DECLARE

  CURSOR cur_emp IS SELECT * FROM EMP;

  TYPE emp_obj IS TABLE OF cur_emp % ROWTYPE INDEX BY PLS_INTEGER;

  l_emp_tab emp_obj;

  BEGIN

  OPEN cur_emp.

  LOOP

  Get the cur_emp COLLECT LOOSE l_emp_tab LIMIT 1000;

  EXIT WHEN l_emp_tab.count = 0;

  BECAUSE me IN 1.l_emp_tab.count

  Loop

  dbms_output.put_line (' Ename:' | l_emp_tab (i) .ename |', Deptno:' | .deptno l_emp_tab (i));

  END LOOP;

  END LOOP;

  -Can I ask specific employee to a deptno outside the loop FOR without using a temporary table

  -something like "SELECT * FROM TABLE (type_name) WHERE DEPTNO = x_Deptno.

  END;

  /

  In a collection of table selection is not effective, there are better ways to do it.

  Why not create a view?

  create view...

  Select * from source1 Union all the

  Select * from source2 Union all the

  Select * from source3

  -or-

  Using ref cursor return... clause, so you can make conditional cursors

  If somecondition then

  Open the NEWS for

  Select * source1;

  on the other

  Open the NEWS for

  Select * from source2.

  end if;

  -or-

  Dynamics based SQL ref cursor

  DECLARE

  TYPE EmpCurTyp IS REF CURSOR;

  v_emp_cursor EmpCurTyp;

  employees emp_record % ROWTYPE;

  v_stmt_str VARCHAR2 (200);

  v_e_job employees.job%TYPE;

  BEGIN

  -Dynamic SQL statement with placeholder:

  v_stmt_str: = ' SELECT * FROM employees WHERE job_id =: I;

  -Open the cursor & specify bind argument in the USING clause:

  V_emp_cursor OPEN FOR v_stmt_str with the HELP of 'MANAGER ';

  -Extraction of the lines of result set one at a time:

  LOOP

  SEEK v_emp_cursor INTO emp_record;

  EXIT WHEN v_emp_cursor % NOTFOUND;

  END LOOP;

  -Close the cursor:

  CLOSE V_emp_cursor;

  END;

  /

  -or-

  
  

  Load in an intermediate table (as a temporary table)
  

• FDMEE requires ODI agent for simple file loading?

  Hello

  I have my agent ODI isn't working because of a problem with OS. I am trying to upload a simple file using FDMEE. When I try to run data load rule he says this ODI agent fails.

  My question is:

  FDMEE requires ODI agent even for simple file loading? FDM does not require us agent of ODI for simple file loading.

  Concerning

  Yes, as I mentioned in my previous post THAT FDMEE is built on top of the ODI, so she run ODI scenarios for all flows of integration

• There is 'table' for the object_type values?

  I wonder if there is a system view, or a table for all the values that can appear in the all_objects.object_type column? Or maybe the only way to get this list of os values to query with the distinct keyword dba_objects.object_type?

  Thank you

  Look at the source of the view:

  Decode (o.type #, 0, 'NEXT ITEM', 1, 'INDEX', 2, 'TABLE', 3, 'CLUSTERS',)

  4, 'VIEW', 5, 'SYNONYM', 6, 'ORDER ',.

  7, 'PROCEDURE', 'FUNCTION', 8, 9, 'PACKAGE ',.

  11, 'PACKAGE BODY', 12, 'TRIGGER ',.

  13, 'TYPE', 14, 'TYPE BODY ':

  19, "PARTITION TABLE", 20, 'PARTITION OF THE INDEX', 21, 'CRAFT. "

  22, 'LIBRARY', 23, "DIRECTORY," 24, "QUEUE."

  28, 'JAVA SOURCE,' 29, 'JAVA CLASS', 30, 'JAVA RESOURCE. "

  32, "INDEXTYPE", 33, "OPERATOR",.

  34, 'TABLE SUBPARTITION', 35, "INDEX SUBPARTITION.

  40, 'LOB PARTITION', 41, "LOB SUBPARTITION.

  42, NVL ((SELECT "EQUIVALENCE OF REWRITING"

  AMOUNT $ s

  WHERE s.obj #= o.obj #.

  and bitand (s.xpflags, 8388608) = 8388608).

  "MATERIALIZED VIEW'),

  43, "DIMENSION."

  44, 'CONTEXT', 46, "SET OF RULES', 47, 'PLAN OF RESOURCES."

  48, GROUP "CONSUMER."

  55, "XML SCHEMA", 56, "JAVA DATA."

  57, 'EDITION', 59, "RULE."

  60, "CAPTURE," 61, "APPLICABLE."

  62, 'EVALUATION CONTEXT ',.

  66, 'JOB', 'PROGRAMME', 67, 68, "JOB CLASS", 69, 'WINDOW',

  72, GROUP 'PLANNER', 74, 'CALENDAR', 79 'CHAIN ',.

  81, 'GROUP OF FILES', 82 'MODEL OF EXPLORATION' 87, "ASSEMBLY,"

  90, 'IDENTIFICATION', ' 92, 'CUBE DIMENSION', 93, "CUBE."

  94, "MEASUREMENT RECORD", 95 "CUBE BUILD PROCESS,"

  100, "LINE WATCHER", 101, "DESTINATION."

  "UNDEFINED"),

• EL for obtaining a value of selected line

  Hello experts!

  I have a page with a table of users and I implement a button named "Reset the user password".

  I want to display a popup with a title: "reset password for user: xxxx", where xxx is to be obtained by EL referring to the current user selected in the users table.

  Any idea? I use jdev 12.1.2

  Thank you!

  I found the solution in the book Jobinesh-Oracle that I bought a long time ago! (Thanks!)

  Declaratively reading the value of the attribute of the currently selected line

  It is very common that when a line is selected in a table, you can update

  other fields in the user interface or call some specific operations with attributes of the selected

  line. There is an easy way to retrieve the attributes you want for the current of line

  definition of the attribute for the attribute binding.

  To set the attribute binding, do the following:

  1. double-click on the file page definition to open the presentation Editor.

  Alternatively, if you have the JSF page opened in the designer

  window, and then by selecting the links tab will open the corresponding

  page definition file editor.

  2. Select the links and the executable tab and click the Green plus icon to

  create a control's binding icon that will be displayed on the bindings panel.

  3. in the dialog window insert an element, select the generic category of links (if it)

  is not selected by default) in the menu drop down and select attribute values

  as the point to be created. Click OK to proceed to the next step. In the

  Create the attribute Binding dialog box, select the desired data source

  (instance of the view object) and then the attribute you want to read

  the line selected in the data source. Click OK to have the dialog box.

  The following is an example for a binding attribute value defined by choosing the

  Collection Departments as data source:

  It's in the page definition XML file

  ID = "DepartmentName" >

  Once you have defined the attribute bindings, you can refer to them using the

  EL of the client binding expression. For example, the value of the previous attribute

  reference can be made using the expression of ADF link as follows:

  #{bindings. DepartmentName.inputValue}

• Input for an item values

  I have a doubt about the creation of input for an item values.

  There is a checkbox for 'point database' when you set the input value.

  What is the exact use of this box?

  I mean even if it is not checked that we select these input as entries in a quick formula values.

  (for example. The entries are BASIC_SALARY)

  What happens if you want to use the value of the entry element in another entry value formula.

  A formula is not attached to your current item.

  It's when you use ELEMENT_NAME_INPUT_VALUE_NAME_ENTRY_VALUE

  Check-

  Select * from ff_database_items

  where user_name like '% ENTRY_VALUE ';

  See you soon,.

  Vignesh

• Read the table for the next value (sequence issue)

  Is there a function in line with my_seq_no.nextval that can read a value from the previous field and get the next number in the sequence? I know how to create a sequence, but I thought that there is something as a function of getnextval.
  
  Thank you.

  Preston,

  The problem is that there is no such thing as a previous value in Oracle.
  You must specify a way (like number maximum.. etc..) to get the expected value.

  Sometimes, you can see the code as...

  insert into emp values
  (select max(empid) + 1 from emp) new_emp_id,
  ''XYZ' ename,
  .......
  ....
  ...
  from dual;
  

  As seen... the code above takes the maximum value of the emp table and gives you the identificateursuivant emp.

  The problem here is that all currently connected users will get the same value for the new empid, until a person inserts a record, then... all others would be unique constraint errors (if you have constraints on the right in place).

  Using sequences is the right way to ensure that all concurrent users get their own unique values for the new values.

  As for the getnextval, they could always get to a function which selects to the max (column-name) + 1 and returns it... but it has the same problems as the insert... Select above... So I would rather not provide code for such a thing... I would do more damage than help it. Please use a sequence for your case.

• My browser is malfunctioning and device drivers are not installed code 28 for Simple PCi communications controller.

  Original title: my browser does not correctly code 28

  Hello

  my browser is malfunctioning Device drivers are not installed code 28.

  Details that are in Device Manager

  PCi Simple communications controller

  Another property

  Harware IDS

  Value

  PCI\VEN_8086 & DEV_29C4 & SUBSYS_50448086 & REV_02

  PCI\VEN_8086 & DEV_29C4 & SUBSYS_50448086

  PCI\VEN_8086 & DEV_29C4 & CC_078000

  PCI\VEN_8086 & DEV_29C4 & CC_0780

  Thank you, Kat

  Hi Kat,

  1. what web browser do you use?

  2. are you unable to go online?

  3. have you made a recent software or hardware changes to the system?

  This error indicates that the drivers for the device are not installed.

  The ID of the seller seems to be related to the drivers of Intel.

  You may be prompted to provide the path of the driver. Windows may have the driver built-in. If you are prompted for the driver and you don't have it, you can try to download the latest version of the driver from the computer or the device manufacturer's Web site.

  You can also try to download the latest version of the computer manufacturer's website Chipset drivers and check if it helps.

  Updated a hardware driver that is not working properly

  For more information, see the article:

  What to do when a device is not installed correctly

  Hope the helps of information.

• Above-report of the Group-new page for every group value.

  Hello

  In schema Scott, I created a simple report with group above.  The taskforce is Deptno.

  Query is - Select * from emp.

  More-> Deptno field group.

  Created deposit of the total salary for deptno.

  report is running. Now, my need is.  for each new deptno - need to create the new page. A Department can have a page or several pages as well.

  If empno repeating frame, "Page break Apres-oui...--> the employees of the Department list is ok, but the total field is printing on the next page.

  But I want to employees of the Department and total salary should appear on the same page.

  How to do this, please

  No it's not true.

  Framework repeting DEPTNO value (for example. R_G_DEPTNO) property of the print Direction through'.

  I hope this works...

  Hamid

• How void executeQuery() in VOImpl.java for simple search

  Hello

  When I go thorugh the dev guide, I read that we can replace the execute query to add more when the conditions for a simple search with queryBean.

  According to dev guide,.

  "

  If the definition of the object of your view requires that the values of bind, or you must manually add a WHERE clause without report every time that the query is run, you can proceed in two different ways. In both cases, OAFramework adds the user's search criteria to the WHERE clause immediately before running the query, so ANYWHERE features clause that you set are preserved.

  1. replace the executeQuery() method in your * VOImpl to change your WHERE clause then call super.executeQuery (). This method is recommended if you exercise the same logic, whenever the view object is queried.
  2. managing of the Go button generated press and call for an initQuery () method on your object from view where you can edit the WHERE clause and/or defining link values.

  "

  I've not seen the executeQuery() in my * VOImpl, am I missing something here? can you please help me the ways above to manage code execution.

  I saw another post exactly in this forum and it helped a lot. (https://forums.oracle.com/thread/541807).

  Hello

  substitution means the same method declaration in the base class.

  If you want to override executeQuery() method in the custom class must be

  {} public void executeQuery()

  }

  to get the values for the binding settings, highlight them in CO OADBT.session. Vo, also get AM instance. OADBtransaction and get those session values.

  Concerning

  Marie Lise S

• Dealing with a URL parameter to be used for a default value

  I have a page of results of detail (the CONTACTS Table Recordset), identified by the CONTACTID
  
  In the same page, I also have another dynamic relational table, showing all the associated notes that contact record (recordset CONTACTNOTES identified using CONTACTS. CONTACTID = CONTACTNOTES. NOTESCONTACTID)
  
  It works fine and I can update CONTACTS without any problem.
  
  My problem is to insert a new record CONTACTNOTES (of a simple URL link) also associated with the same record.
  
  The primary field (NOTEID) is an AutoNumber but I need to carry out CONTACTS. CONTACTID variable to use as the default value for the CONTACTNOTES url. NOTESCONTACTID.
  
  I think something like that...
  
  in the dynamic table on the initial results page, using (/ insertnote.php?) CONTACTID = <? PHP echo $row_recordlookup ["NOTESCONTACTID"];? >) as the link, setting the URL parameter.
  
  The page insertnote has a recordset insert form, related to the CONTACTNOTES table.
  
  Now, I don't know how to add this URL parameter as the default field value. Is it as simple as putting the $HTTP_GET_VARS ["CONTACTID"] in the field of the Init val in the property inspector?
  
  

  Sorry - worked on...

  On the new page of note insertion, I first created a Recordset, duplicate on the initial results page.

  When you create the form, it was easy then to insert {CONTACTS. CONTACTID} as a default value.

• creation of the loop for a Boolean value

  Hello
  
  I'm still a beginner at so forgive me if this sounds simple...
  
  I created 16 Boolean values with all the false value.
  
  Now with a loop for, I try to create 16 buttons, and when each button is pressed, the respective boolean compared to this button will change to true. Looks something like below:
  
  Somehow, this does not work... someone can point me to an error in the coding? Thank you very much!
  
  
  

  Couple things...

  It is standard for a button work onRelease, not delivery.

  -at your service delivery made reference to the button. Not the root
  panel mounting as you probably want to target. The real problem, however, is the
  the reference to I in the button. If you do a trace (i); within the delivery
  you will find that each button will trace 17. This is because the button don't
  not to maintain a local reference to i - just button refer to the final
  value of i in the main timeline... it's called scope. Sometimes issues of concern
  can be a real challenge. What you need to do is to create a local variable
  in the buttons and I store it in this variable.

  for (var i = 1; i)<= 16;="" i++)="">
  This ["button" + i] .i = i;
  This ["button" + i] .onPress = function() {}
  This ._parent ['status' + this.i] = true;
  }
  }

  --
  Dave-
  Developer leader
  www.blurredistinction.com
  Adobe Community Expert
  http://www.Adobe.com/communities/experts/

• Is there an instruction manual of basic TB for simple things like italics, for example

  Simple typing things that vary from one product to the other - police/size/color/bold/underline/italics should be definable, suite or off anywhere in a message typed in by the user (including answers). As in other clients of the Treasury Board to realize these is probably unique. Given that I have not found any information of base here (yet) I wonder if there is a manual or a guide to get this from?

  If you press Ctrl + I on your keyboard, it should turn italics on and off. You can do the same thing with the selected text. This is similar to e.g. MS Word.

  This only works when you compose rich messages (HTML), which is the default value. When you compose messages in plain text without formatting options are available.