Inherent deny at the end of the list of access-700?
If I specify the following configuration:
access-list 700 allow 5c59.4812.35fb
access-list 700 allow 0024.d71b.de64
dot11 association-list mac 700
There is a DENY inherent in all other MAC addresses at the end of the access list 700? This configuration is allocated to an Aironet AP801. I would use it to specify what I allowed in my house and deny any device that attempts to connect to the AP. I think that it is a viable solution to prevent intruders who could crack my WPA2.
Thanks for the comments!
James E
Yes, there are deny an inherent at the end of an ACL of series 700 just as there are in all ACLs.
Tags: Cisco Wireless
Similar Questions
-
Insert the list of access between the other 2 control numbered ACL on cisco
Someone knows how to do this? I heard about Cisco and have actually did this once, but don't remember the syntax.
I should be able to insert the acl 15 between the low 2.
Expand the 198 IP access list
10 ip allow a whole
20 a whole ip deny
TIA
Router (config) #ip - extended access list 198
Router (config-ext-nacl) #15 allow accord a
-
Follow these steps:
import flash.display.Sprite; import qnx.fuse.ui.listClasses.List; import qnx.ui.data.DataProvider; [SWF(height="1024", width="600", frameRate="30", BackgroundColor="#000000")] public class test3 extends Sprite { public function test3() { var l:List = new List(); l.dataProvider = new DataProvider([{label:1},{label:2}]); l.setPosition(200,200); l.width = 200; l.height = 200; addChild(l); } }
And run the application.
Point the finger just below the last line of the list, and then drag upward or downward.
You get this:
TypeError: Error #1009: Cannot access a property or method of a null object reference. at qnx.fuse.ui.listClasses::List/resetCellState()[E:\hudson\workspace\GR2_0_0_AIR_SDK_API\src\qnxui\src\qnx\fuse\ui\listClasses\List.as:2532] at qnx.fuse.ui.listClasses::List/deselectCellDown()[E:\hudson\workspace\GR2_0_0_AIR_SDK_API\src\qnxui\src\qnx\fuse\ui\listClasses\List.as:2337] at qnx.fuse.ui.listClasses::List/scrollMouseMove()[E:\hudson\workspace\GR2_0_0_AIR_SDK_API\src\qnxui\src\qnx\fuse\ui\listClasses\List.as:2349]
How I not imprison it? Is this a bug of the qnx.fuse.up.listClasses.List component?
After typing this post, I went back to the SDK download page and noticed there is a new SDK available (as dated February 3, 2012) 2.0.0. I used the previous version dated SDK Date January 16, 2012.
So I advanced and upgraded to the latest version of the SDK, and this error no longer occurs.
It must have been a bug.
So I solved (kind of) my problem... Kudos to me... ha!
-
The list of access on a blade JOINT definition
I have a JOINT blade for a 6500 switch series. I need to change the administrative of the CLI access list, so I can get in remotely and with GUY
I see in this config entries
access-list 192.168.100.10/32
I guess this is the section for the hosts that are permitted to access the METHOD
but I can't understand how to add an entry?
any advice would be great
on the console, you can add entries in the following way:
conf-mode:
service host
the network settings
access-list 10.10.10.0/24! or you want to add
output
output
answer 'Yes' to apply the changes
output
! (loan)Sent by Cisco Support technique iPad App
-
Admin removed the rights to the list of access (ACL) HDD control how get that back?
I was working on my computer and tries to limit access to a hard drive installed in the computer (this isn't the reader operation re-allocated is on, is a completely separate disk) it is still visible but unaccessable. I deleted some of the groups and users for the reader and lost access to the hard drive completely.
I did a search online and found that I could connect to the hidden administrator account to allow more users in the account. In doing so, I managed to remove access to the account if the administrator account.
Is there anyway that I can regain access to this hard drive? Or is everything is lost. I have been working on this for hours now and have scoured the internet looking for solutions. I even tried to download the MS ACL repair utility which does not seem to do much good either.
1 log on as administrator
2. right click on the drive (say D:\)
3. Select Security tab
4. click on the button to change
5. Add users & administrators
6 grant permissions of access 'Total control' or 'Modify' according to your needs
7. click on apply button, then click on the OK button. -
Hello
Can someone help me with this reset bar back to show my VPN and network without having to restart my computer? This seems to happen a lot, and it is annoying when it is blocked and I have to restart my computer to solve this simple problem. No button back, no nothing, just stuck there. Tried diagnostic network, right click or whatever it is, it is always there. Any idea?
Thank you
Hi Rudy,.
I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.
You did changes to the computer before the show?
I suggest you follow the steps below to solve the problems on the issue:
(1) go to network/sharing (click right connection icon lower right)-> change the adapter settings
(2) right click on your vpn connection3) click on leOptionsonglet(4) uncheck the remember my credentialsHope this information is useful. Thanks for posting in case you have any questions, I'll be happy to help you.
Thank you.
-
Hello
I define an access list 700 like this:
access-list 700 allow 000e.3543.2c81
to allow only a single computer at a port.
conf t
int Fa0/1
Bridge-Group 1 entry - list address 700
I want to apply on a port Fa0/1 so I can't find the way because the port never become to err-disabled if I connect to another computer.
I don't know why?
Thank you for your help...
Can you provide the access-List commands you used?
Orders should be as follows:
Mac-extended access list MAC_Allowed
allow the host (MAC address / 48-bit) everything
for example:
allow a host 0050.56c0.0001
allow a host 0019.b960.bbca
int f0/1
Access-group Mac MAC_Allowed in
Please indicate if this help.
-
I have several topics (A, B and C) in which I want to place a control 'See also' that has two subjects (B and C) inside.
In the A section, click on the control see also appears a list of "A" and "B". Click each item in the list to access the topic.
In the B section, click on the control see also jumps directly to heading C.
In the C section, click on the control see also go directly to section B.
Is there a way to force the control to * always * bring up a list of subjects "see also"? For example, in section B, I would like to control to display a list containing just heading C.
Hoping that...
Thank you.
Hello
Administer a test.
Click your related topics in WYSIWYG button and switch to HTML view.
You should see a quantity of larg of the code presented in green, followed by a small amount of what looks like the code repeated in dark red.
Copy the following line (including the < and="" the=""> and add the following line to each area.)
Give it a go and see how you rate.
See you soon... Rick
Useful and practical links
Wish to RoboHelp form/Bug report form
Begin to learn RoboHelp HTML 7, 8 or 9 in the day!
-
I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?
It is a decision that was made by Apple. El Capitan is the newest OSX that will support a 2009 MBP.
This is not uncommon. My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.
Old hardware ends up by becoming obsolete with newer technology.
Ciao.
-
Question as noted, sums it up. When I click on the mousewheel on a link in a tab, for I want a new tab open with that link and want it beside the tab, I clicked on the link in any as Firefox V3.6 has done. Firefox 8 is always open the new tab at the end of the list and boy is that embarrassing!
Please tell me how to solve this problem.
Define the Boolean browser.tabs.insertRelatedAfterCurrent true pref on the topic: config page.
To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
If you see a warning then you can confirm that you want to access this page.- Use the filter at the top bar of the on: page config to more easily spot a preference.
- Preferences that have changed also show "BOLD" (user set).
- Preferences can be reset to the default value using the context menu if they are set of users
- Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)
-
My DEFY music stops after 3 minutes with the music player not on the list end
I have a problem with the way my Defy plays music.
I'm ciau built in music player and it works fine if I listen to it from the widget of the screen, but if I go into the player's menu and manually select a song in the list he stops playing after 3 minutes (once the screen goes black).
It's really annoying as I'm going jogging, I can't listen to the favorite podcast that she stops after 3 minutes. I have to keep hitting the widget button 'next' until I find this podcast to listen to it without interruption.
In addition, music player is not on the list of end in my task manager.
Help...
-
Hi all:
I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.
The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target." Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.
Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.
Thanks anyway. National Instrument of love. Hope to work there one day.
-
files of jump at the end of the list of the thumbnail after edit in Ps
Hello
Files of jump at the end of the list of the thumbnail after edit in Ps or any other plugin application.
So the question is... how I make them stay in the order and the new stick with original folow.
Help, please.
Thank you
Adrian
Adrian_from_London wrote:
It's "the stack with the original", but the two files of will jump to the back... I was looking for a command that would suit tiles in alphabetical order, but nowhere to be fond.
Sounds like you have the folder sorted by "added order." Just change it to "filename". If you are in the library, under the Pictures toolbar shows you the current sort order (if you chose to show by clicking the small triangle to the right end of the toolbar).
Who help me?
Bob Frost
-
Add items to arrylist from the end of the list
Is it possible to create a new arraylist with, say, 1000 int cap and start adding items from the end?
That is to say:
myList.add (999, "xyz");
myList.add (998, "blah");
myList.add (997, "foo");
etc...
When I try to do, I get out of the exception of limits because the size of the arraylist is always 0...
Thank youNo, you will need to complete the list with dummy values first
-
Hello
It's hard to explain, so I'll do my best:
Each comment that appears on the page, also appears on a list of the comments pane on the right.
Sometimes, in the XI of Acrobat, I used to click on the comment on the page, then it will appear at the top of the list in the right pane it scrolling upward.
Now, Acrobat DC, when we click on the comment on the page, it appears last on the list of comment in the right pane.
This can be changed?
all the best,
Shlomit
Hi Shlomit,
I'm sorry to say this, but there is no such customizable comment setting in Acrobat DC.
Kind regards
Rahul
Maybe you are looking for
-
How can I download video
-
Photosmart C5380 under Windows 7/64
Hello newbie here. I can't add a new album to my library of essential software. I've updated to the latest version. My pic is in an album (2 000 +)
-
Satellite A300-1J1: cannot use F8 to start the HARD drive recovery process
I just brought a laptop Toshiba Satellite A300-1j1, and at the same time got the upgrade to Vista Ultimate disk at the same time. Straight out I went to a sweet upgrade to Ultimate, which failed, and restored in Premuim laptop. Stupidly I immediately
-
Hello Could someone please tell me where I can find one for my laptop lcd inverter (see info)? There is compatibility between the g7 and the dv7 inverters? or something? Thank you very much Jogging
-
You can synchronize digital input with an analog input on a 6034e?
Is there a way to synchronize the digital input and analog input on a 6043e? I tried the test application "SyncAI_ReadDigChan", but it fails during the humor tick Verify(): "The requested value is not supported for this property value. Property: Nati