Initialization failed after using Windows 8.1 Pro Recovery DVD

Similar Questions

• Validity Sensor does not not in dv7t - 6 c 00 CTO Quad Edition using Windows 8.1 Pro 64-Bit

  Hello

  I have a Pavilion dv7 (dv7t - 6 c 00) CTO Quad Edition (product # A1L77AV) I can't get the validity fingerprint sensor to work after installing Windows 8.1 Pro 64-Bit from scratch.

  Windows 8 drivers that are available for this model do not seem to work. Other drivers Windows 8.1 available in the HP site do not seem to work either.

  The unit shows in the management of the computer as a work, I guess by using a Microsoft Driver. The Unit presents itself as "validity sensors (WBF) (PID = 0018)' in the biometric devices topic."

  Any help will be appreciated.

  Thank you

  Hello SauveDuro, welcome to the Forums of HP.

  I see you are trying to install the drivers for the fingerprint reader on the laptop for Windows 8.1, you've seen questions get this working.

  Unfortunately, HP does not drivers for Windows 8.1 for your laptop.

  The most I can recommend in this case, check the manufacture of each component for Windows 8.1-compatible drivers.  Here's a link of validity, you may be able to get drivers that work for him: http://www.validityinc.com/software/hp/wbf.php.

  This can also help you to: Troubleshooting a (Windows 8) fingerprint reader.

  Sorry for the inconvenience that this may cause. I hope that something can help you.
  Thanks for posting on the HP Forums.

• "the password is incorrect" after using Windows 7 Easy Transfer

  The problem is that the 'password is incorrect' after using Windows 7 Easy Transfer.

  I've already studied this problem on the Internet and in online forums.  A lot of people seems to have the same question/problem/question.  Noone has a solution.  Several members of the staff of Microsoft technical support provided responses which do not solve the problem, explain what is happening, or were intended to solve the problem of evil.  For example, many responses were that political Microsoft does not provide assistance when retrieving passwords.  OK, but this isn't what is asked for.  There is a problem and it would be good if someone has recognized that there is a problem and - at least - it is being researched if there is not already a solution.  Anyway, as many have already asked, here is my point of view trying to find a solution to this problem:

  Used Windows 7 Easy Transfer to move user accounts and files between an old 32 bit Vista PC to a new PC 64 bit Windows 7. The transfer was made on a network without using an easy transfer cable. There is no errors during the transfer and user accounts on PC Windows 7 seem to be transferred correctly. Once connected to a user account on the new PC, opens a window titled 'Migration of protected content'. Text indicates that the protected content is transferred and request a password to be entered in a password field. I entered the PC Vista user account password, but the password was not accepted, and this error message is printed "the password is incorrect". All the transferred accounts had exactly the same problem, even if the original Vista PC account password has been entered correctly.

  Studied this problem on the Internet and a suggestion to solve the problem is that the password requested is the STEM of simple transfer is used to start the transfer. I have re-transferred from user accounts and entered to the STEM of easy transfer when windows 'Protected content Migration' asked a password. Always to receive the same error message "password is incorrect" on all user accounts.

  You will need to determine what password is requested. In my view, it should be the original account on the old computer password, but perhaps the easy transfer ROD. If it is not what should it be? If it's neither of the two, which? If it's the original on the old computer account password or easy transfer ROD, why aren't these being accepted because I tried them both. Once the correct password is available, is it possible to open the window of 'Protected content Migration' to enter the password without having to use Easy Transfer to transfer the accounts?

  Finally, what is the protected content that is transferred? How will I know what it is?  It doesn't seem to be something missing in the accounts of user who is easily visible by me. If the protected content is not necessary then not being is not able to access may not be a problem. Because I don't know what content is protected, I have no way to assess if not available is important.

  Pegasus,

  What password? The Windows logon password? Yes

  Have you tried to log on as an administrator? Yes

  Or using your database password key USB key file? No, but why?  I know what are all passwords logon and they seized everything correctly.  Again, the question that must be answered - by someone who knows - what password is asked?  Why are all the suggestions "try this or try that."  Nobody seems to be able to tell which password is requested or why.  What is the protected content that is transferred.  I don't think that there is nothing like DRM content on the original system.  Why this request appears?  Anyone know?

• After using Windows 7 backup, Windows said: "the last backup failed."

  I use Windows 7 Pro backup each week to a separate hard drive. I needed to use the backup today. After using action Center says now that my last backup failed. It is still listed in the backup and it worked, then why is it listed as failed now?

  Event ID 4 means the backup completed successfully

  Have you compared the last backup to backup other files?

  You can try to perform a new backup to make sure that it works correctly.

  Antivirus software may have hindered during the backup process and triggered the message "failure of the last backup.  Turn it off when you run another backup.

  Good luck!

• CD/DVD on Satellite U500 drive failed after installing Windows 10

  My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.

  I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
  I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.

  I'm about to give up the laptop but am wondering if anyone can help me?

  I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!

  U500 is old piece of hardware and not supported for Win10, right?

  In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?

• Each installation of the PATCH fails after installing Windows updates

  Hello

  I would like to report a problem, I think it's a bug of Windows introduced by one of the Windows updates (unfortunately I could not know who of them).

  Here's the test scenario:
  1. install a fresh copy of Windows on a test computer
  2. install all the Windows updates available (so the system is up-to-date)
  3. create a sample MSI installer that installs only some dummy files (let's say Product Version 1.0.0) and host on a web server

  4. install the MSI from the online location using a command line like this:

  msiexec /i http://server/share/package.msi

  5. create a. Patch MSP (e.g. v1.0.1) which only adds a new file to v1.0.0
  6 install the patch v1.0.1

  RESULT: the installation of the patch fails with the following error message: "the file name, directory name or volume label syntax is incorrect."

  NOTES:
  1. the question has replicated to Windows 7 and 8 machines updated
  2. the question is not replicated on a new install of Windows without updates applied

  Is anyone aware of what may cause this error? Once again the patch installation fails only on Windows computers with the latest updates installed.

  THX,

  Daniel

  Hello Daniel,.

  Thanks for posting in the Microsoft Community.

  I suggest you post your question in the MSDN forums:

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Recently, after using Windows Update, I noticed a few sites I visit, I can't view some images.

  It has gotten to the point where I restored my computer to factory settings. Everything worked until I used Windows Update. I have yet to install an anti-virus because it was literally just yesterday that I did this, so I know it must be a Windows problem, not a firewall, etc.. If it helps, I can't display photos from katespade.com, luckybrand.com and claires.com sites product. I noticed that all of them have a zoom + and -. Any help is appreciated!

  Hi, TheClaxons,

  You can restore the system to a date and time before the current updates.  See if that solves the problem; However, you take a big risk, access to the internet without anti-virus software.

  Microsoft Security Essentials is a free software.  I suggest that you download and install your security software preferred; then surf the web at your leisure.

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

• Startup fails on Qosmio F20 - alternative to the recovery DVD?

  My Qosmio F20 system restore failed and the OS keeps re-booting and stop alternately. Dare not use the recovery DVDs that I don't have all the files and folders saved yet.
  Don't want to lose them once this system is reformatted. Other options?

  HI Azman,

  First, you will need to identify the cause of the closures (I assume you get a blue screen error followed by a re-boot). You can do this by disabling the automatic restart facility so that the system stops on the blue screen.

  Depending on the error, you may be able to start Notepad in 'safe' mode so that you can back up your data safely.

  Kind regards

• Satellite Pro L670-16Z - XP installation after using Windows 7?

  Regards to all forums. I'm new here.

  Next week I should get a new pc, * Satellite Pro L670-16Z *. I have a few questions.

  * 1. * If, during some weeks, use my computer with Windows 7, after that I can downgrade to Windows XP?

  * 2 if I downgrade to XP, you can reinstall Windows 7 new?
  Thank you for the replay.

  If you want to reinstall Windows 7, you must first create the recovery disk. There should be an icon on the desktop. Use good quality DVD discs since those of poor quality can cause errors during recovery.

  To install XP, you buy XP in a store (which may be difficult).

  You can run XP in Windows 7 Professional or higher using a Virtual Machine.
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

• The driver installation fails after custom Windows 7 Pro install

  Hi all.  I just replaced the drive hard on my ProBook s 4440 as the original, one crashed unexpectedly.  I then reinstalled Windows 7 Professional but now have no way to connect to the internet.  I installed the driver of "Sierra Wireless Driver Package for add-on unit high flow Mobile HP un2430", but I still see the message "no connection is available" when I try to connect to my wireless network.  By Device Manager, I'm still missing the drivers for the following (hardware IDS are in brackets):

  (PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30) base system device

  (PCI\VEN_10EC & DEV_8168 & SUBSYS_17F3103C & REV_07) Ethernet controller

  (PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00) network controller

  Controller of communication Simple PCI (PCI VEN_8086 & DEV_1E3A & SUBSYS_17F3103C & REV_04)

  (PCI VEN_8086 & DEV_1E31 & SUBSYS_17F3103C & REV_04) USB controller

  Any help or advice would be greatly appreciated.  Thank you!

  Hello:

  You need the following drivers:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111787-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111305-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-116003-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-113862-1

• vCenter Storage Monitoring Service Service initialization failed after the upgrade from 5.1 to 5.5

  I recently upgraded from vCenter 5.1 to 5.5. After the upgrade, I started getting health warnings for the VMware vCenter monitoring of Storage Service that say "failed to initialize the Service." I restarted the vCenter server and restart services several times and who has not deleted the question. When I look in the SMS. LOG file there is no activity in it since I did the upgrade (a week or more there). All prior activity in the SMS. JOURNAL seems to be well upward until the upgrade took place though. I found at least half a dozen KB articles that describe the various reasons why this error may occur, but they all relate to older versions of vCenter. Just to be complete, although I saw the symptoms in the articles and none of them really seem to be the same as what I see. My hypothesis is that perhaps the SMS did not get properly re-installed upgrading because I don't see any SMS subdirectory in the directory \Program Files\VMware\Infrastructure\tomcat\webapps but I do not know if this directory must exist on a 5.5 installation.

  If you would be grateful if anyone has any advice for troubleshooting for this type of error.

  Thank you

  Mike

  Change the credentials of the service account for VMware vSphere Profile-Driven Storage Service to those used to start the VMware vCenter Server service and the service of VMware VirtualCenter Management Webservices. By default, the account used Local System.

  Restart the service, the change was made, and then check.

• start failing after installing Windows XP firefox 12.0: error message: "the configuration is incorrect."

  After clicking on the icon of Firefox, I get the error message "this application has failed to start because the application configuration is incorrect".

  I uninstalled Firefox and deleted all the Mozilla files in my user account in the Documents and Settings folder. I installed the latest version of Java. Then I installed Firefox 12.0.

  I had this same problem when I updated my Firefox 11 to a later version of Firefox 11. I hadn't saved the old version of Firefox 11, and I couldn't find on the web, so I went back to Firefox 3.6. I am currently in Firefox 3.6.28.

  I'd like suggestions on how I could get over this stumbling block.

  Details of the configuration of my system:

  Version Java 6 32

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  System Type X 86-based PC

  Processor x 86 Family 6 Model 15 Stepping 6 GenuineIntel ~ 1867 Mhz

  Total physical memory 048,00 MB 2

  1.38 GB available physical memory

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Page file space 3.84 GB

  You can try to uninstall all entries of "Microsoft Visual C++" from the windows control panel and see if the error message disappears.

  (where another program on your pc depends on execution, it will display a dialog box when you start this program and offers you to reinstall once again)

• Satellite Pro 6100: BSOD after use of the 6000 SP recovery CD

  My 6000 Pro Satellite recently bitten the dust after several years of daily use. I just bought a used SP6100, after which I tried to use my SP6000 product recovery CD to do a reformat. Since when I Stop (obviously common) * 0x0000007B (0xF9680640, 0 x 0000034 etc.) error and blue screen on reboot.

  Is there a way to turn it? I had not thought about media recovery is specific to a single model (and the 6000 and 6100 are quite similar in terms of model anyway), but is this the case?

  Thank you very much for all the advice

  Cannot use the recovery CD on the different laptop models. Perhaps the two Satellite 6000 and 6100 are similar, BUT not even.
  Different drivers and chipset utilities are used on these books.
  The restore CD contains all drivers and utilities, and it seems that the blue screen error message appears because some applications and drivers are incompatible and unsupported on the second satellite!

  So if you want to use the Sat 6100 you should install the OS from the original CD of Microsoft and then visit Toshiba s driver and download the RIGHT and compatible drivers.

  Good luck

• Black screen after using Windows Memory Diagnostic

  Recently I have experienced problems with the system restore doesn't work don't not and although perhaps it was the file system and so I started Windows Memory Diagnostic and didn't know that you need to manually restart the computer and so I tried works again and again until what it finally hit me that I needed to restart it myself. He began to do his thing and I left a little to return to a black screen at 3:30 and it is now 23:00 and still nothing has changed. Don't know what to do and I don't want anything corrupt or damage my computer anyway. Is it normal for her and if not, how can I stop my computer safely?

  Hi Brendan,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest you use the steps in this article and check if it helps.

  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• BSoD after updating Windows on Win7 Pro SP1 x 64

  So, yesterday windows had installed updates for my machine, but now when I turn it on, it crashes with this error

  PAGE_FAULT_IN_NONPAGED_AREA 0 x 00000050 (win32k.sys)

  I didn't install anything last time, it was only windows update itself

  Thanks for the reply

  Apparently my first answer could not be validated, so I'll try again:

  Its a known issue, see this post for a way to repair:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/blue-screen-Stop-0x50-after-applying-update/6da4d264-02d8-458e-89e2-a78fe68766fd

  Also:

  Customers who are unable to restart their computer after installation of this update can be found steps of resolution published in the section known issue from Microsoft Knowledge Base Article 2982791.

  J W Stuart: http://www.pagestart.com