Initialization of a string with a UTF-8 character

Similar Questions

• How to convert the string with numbers in the table of Boolean 2D

  Hello

  I have input a string with comma separated numbers 1,192 (starting at 1).

  This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

  The 2D table consists of 4 times of 0.47 Boolean values.

  1.48--> [0.47] numbers [0]
  49.96--> [0.47] numbers [1]
  Numbers 97.144--> [0.47] [2]
  145.192--> [0.47] numbers [3]

  If a '1, 49, 97 145' input string put all [0] [0.3] true.

  How can it be easy/fast resolved?

  Thanks for help

  Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

  In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

  Repeat this step for each number in your table.

  (What is a class assignment?)

• How to convert the string with numbers in U8 with ascii

  Hello

  I have a string with only numbers 0. 9 paper.

  Now, I want to convert to table-U8.

  He works here, but now the problem: How can I change each character to its ascii value?

  Example:

  entry: 123 (string)

  output: x 31, x 32, x 33 (U8-array)

  Thanks for the help

  It's very easy

  String to Byte Array Function
  Have the Palette: string/array/path Conversion functions

  Converts a string to an array of unsigned bytes. Each byte in the array has the ASCII value of the character corresponding to the string.

• Number of strings with decimal

  Hello community,

  I would like to convert numbers to the string with decimal separators. So if the number is 52351 then the string I need is 52 351

  Another example 18653284.9653235 becomes 18,653,284.9653235

  What would be the best way to do it?

  Thank you!

  Read this thread: https://forums.ni.com/t5/LabVIEW/comma-separator-for-large-numbers-how-to/m-p/2123090/highlight/true...

  Not the first person to wish for this idea.

• How to concatenate the string with a digital command?

  Hello

  How to concatenate the string with a digital command?

  Thank you.

  

  I think I forgot to add the semicolon, what you can do is, drag the CONCATENATE function and add semicolon.

• How the filter string with don't cares...?

  Hello

  I need help on getting filter string with cares. Attached is a VI for ref.

  If anyone has chain, analysis of expertise; I need your help.

  Thank you

  SB_LV

  Another fun one

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• How to capture the data of type string with agent script and then compared to an alarm

  Hello...

  How to capture the string with agent of script data and then create a rule to compare the string data to generate alarm?

  Thank you!...

  Start here:

  http://en.community.Dell.com/TechCenter/performance-monitoring/Foglight-administrators/w/Admins-wiki/6155.custom-script-agent-1-leverage-an-existing-monitoring-script-to-push-data-into-Foglight

• Search strings / with some applied condition

  Hello comrades,.

  I am writing an extendscript which is supposed to loop through all of the PGF and find all the strings / with a certain condition applied (say, comment).

  The problem is that in the script guide, I couldn't find a function that retrieves the status of character property. I tried to use the function "charAt() (i)" js, but it doesn't seem to work in ARE. No idea how to implement such a function?

  Here's the 1st draft of the script.

  var doc is app. ActiveDoc;

  If doc. {ObjectValid()}

  checkCondFMt (doc);

  }

  else {}

  Alert ("no open section");

  }

  function checkCondFMt (doc) {}

  FMP var is doc. MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  var CondObj is doc. GetNamedObject ("Comment");

  While (FMP. {ObjectValid()})

  var textItems is bmp. GetText(Constants.FTI_String |) Constants.FTI_LineEnd);

  var b = new TextRange();

  TR. Beg.obj = tr.end.obj = textItems;

  TR. Beg.offset = 0;

  for (var i = 0; i < tr.len; i ++) {}

  var c = tr.charAt (i);

  var PgfProps is doc. GetTextVal c [i], Constants.FO_CondFmt;

  Alert (PgfProps.Name);

  }

  PGF = bmp. NextPgfInFlow;

  }

  }

  Thanks in advance for your comments!

  OK, I see the problem now. JavaScript doesn't have a "block scope" for its variables. She carried the function, so your 'i' variable is used in more than a loop. You must use a different variable for the inner loop:

  for (var j = 0; j < oCond.length; j += 1) {
      if (oCond[j].Name == CondObj.Name) {
          applyCharFmt(textRange, doc);
      }
  }
  

  In the code example above, I use 'j' for a counter for the inner loop.

  In general, you can avoid problems of this kind to declare all your variables at the top of the function:

  function functionName (param1, param2) {
  
      var i, j, textlist; // etc.
  
      // function code...
  }
  

  That makes it easier to 'follow' variables and make sure that you do not use one more than once.

  -Rick

• dbms_random string with restrictions

  Hello. I want to generate a random string with certain restrictions. I need return numbers between 0-9 and letters from A - F. For those of you asking why the specific request, I need to create a string that is compatible with the unique identifier of the SQL SERVER. Jacky ideas how to add restrictions in the following lines.
  

  SELECT dbms_random.string('X', 32) AS Random_String
             INTO v_rand_string
             FROM dual;

  You have to use DBMS_RANDOM (which will inevitably generate duplicates)? If you try to be compatible with the unique identifier for SQL Server, why not use SYS_GUID, which is

  SELECT sys_guid()
    FROM dual
  

  Justin

• Parses a string with a SAX parser

  Hello

  I developed a returned from the XML web service. This XML file is intended to be analyzed by the blackberry.

  I am currently unable to deploy the web service, that what I did to test it is copy the result in a string and store it in the program.

  When I try to analyse if I get an exception: SaxParseException: wait until the end of the file (I watched with the debugger and the row and the column of two exceptions are - 1).

  String test = Oas.DUMMY_ANSWER;
  SAXParserFactory factory = SAXParserFactory.newInstance();
  SAXParser saxParser = factory.newSAXParser();
  System.out.println("DEBUG: " + test);
  InputStream in = new ByteArrayInputStream(test.getBytes("UTF-8"));
  ReportHandler handler = new ReportHandler();
  
  saxParser.parse(in, handler);
  

  Oas.DUMMY_ANSWER is a very long, pasted from Notepad.

  It has also tested ByteArrayInputStream (test.getBytes ()) new; but no more chance.

  If anyone can help?

  My French is not a lot.

  But I think that you do not get the exception when you replace the test with "" and ask yourself if it's limited to strings directly in the code?

  I have a virtually identical to your code, data processing I was sent by a server.  It works very well.

  But the SAXParseException does not indicate that you have an a problem XML with the string you pass in.  He'll tell you line and column number, which may be useful given that you printed the string beforehand.  It will also give you a message to tell you what the problem is.  If it is not, then if you have some kind of debugging in your manager, you will be able to understand the last bit of XML transformed.

  To verify your XML file, your code is fine (certainly better than my French!).

• String with \t\n output

  Hello

  I'm trying to add my string of the report output, and the output of the channel is something like this..."...\t\n, akfjdakjf\n, jaiejfiaje\n." When the string is displayed in the report, it displays everything in one line (made in one long line). I would like the report to show as below...

  ajkfj

  ajfkd jkjfka

  fjka

  Very grateful for the help. Thank you ~.

  Could you please show us how you write the text in the report?

  Please note that if it is a string variable that you pass on, "\n" is a string static and not evaluated with respect to escape characters. So if you want to have a new line, the variable itself must include the new line, is not the "\n'-"command"for a new line...

  Tip: If you need a new manual line, you can insert one pressing Ctrl + Enter...

  hope this helps,

  Norbert

• LabVIEW 8.5 problems using strings with MATLAB Script node

  I am having some problems that seem to be a bug that I can not understand how to solve using strings in the MATLAB script node.

  I have two subVIs that make some calculations and both include a variable called "errortext" is a string. The two subVIs do their calculations using the MATLAB script node, so all the outputs are defined in the script node.

  The first sub - VI outputs that string and a number. The string is sent to an indicator on the front panel. The number is sent to the second Subvi which performs some calculations more and then returns another string of the same name to an indicator on the front panel. This second string is different from the first (error different two messages should appear).

  I did have problems with this in the past until this morning. This morning, it seems that two of these channels are now somehow mystically connected to each other. The second string repeat that what the first channel said despite the fact that the first string is not be linked to the Subvi where lives the second string. The only link between the two is a calculated value of double which went from #1 to the Subvi #2 Subvi.

  I tried many things: I tried to rename the strings so that they do not have the same name. Initially, he would not let me and gave me an error saying that the renowned string was a undefined variable (which is ridiculous). After removing and replacing things, I finally managed to do so I would change the name, but now it displays nothing at all and even more I think it might still display a completely different another string in my code!

  I also tried to remove the channel indicator and replace it. Yet once, it wouldn't let me initially. I would like to highlight, press DELETE and nothing. Finally after replacing all the subVIs with them, I was able to remove the flags, but this did not help the problem.

  Any idea for these problems pecular is greatly appreciated!

  I totally understand what you did, you were talking about variables in your fist post, and it was not clear if you were referring to a variable you have defined in the Matlab code, or you try to call a variable indicator/control, where is often seen on this forum (and who isn't). That said, the crux of The Matlab Script communicates with Matlab via ActiveX, and when you use a command window opens small. This is the workspace of Matlab environment. A variable that you define in a Matlab Script node will be visible in the other, even if it's in another VI (see attached for an example, figure). This is because the script nodes are running in the same environment space. It seems to me that if this is what is happening.

• How do to convert the string (with the Hex data) in number?

  Hello

  I use TestStand 3.5 to automate a few test cases associated with boot loader.

  The requirement is that I need to read the value in some places for specific address. The values of these addresses are stored in a hexadecimal format.

  We have a step customized in TestStand through which we can read these values by address, but she returns as the type "String".

  For example, the value to 0 x 0000008 is 000001 B 2, and he returned in Locals.Value_Read as "000001 B 2" in the string.

  Is it possible, I can convert the string "000001 B 2" to a number?

  I tried to use the function-> val (locals. Value_Read), but it is return 0 as TestStand figures that the input string is not representing the valid number.

  Please help me with this.

  Thank you and best regards,

  Niraj.

  Try: Val ("0 x" + Locals.Value_Read)

• How to convert numbers to the string with an optimal number of numbers?

  Hello.

  I'm doing something that seems just, and I wonder how much trouble I have with this.  I'm sure there is a way to get LabVIEW for this.

  I have a table of numbers (double), and I use the 'Worksheet picture String' function to generate a string that I can write to a file.

  The problem I have is I want to make the chain to omit useless zeros after the decimal point, but I don't want to limit the accuracy of the numbers that requires it.

  For example, if my data is as follows:

  0.02

  0.4476

  -0.0244570001

  I would like for the string I can be exactly like what I wrote above.  However, depeding on the format string that I use, that's what I get:

  format string: %.10f

  0.0200000000

  0.4476000000

  -0.0244570001

  format string: %f (it seems that by default 6 figures)

  0.020000

  0.447600

  -0.024457

  format string: %.4f

  0,0200

  0.4476

  -0.0244<= all="" trailing="" digits="" for="" this="" number="" have="" been="">

  Anyone know what the format string should be to get the string I want to (what is this

  0.02

  0.4476

  -0.0244570001

  Thanks in advance,

  Alejandro

  Hello Alejandro:

  Try %#f