INITIALIZE A HP LJ P1102W HD

Similar Questions

• P1102w: P1102w - orange light blinking - won't initialize

  My printer won't boot and the orange light blinks. I tried to uninstall and reinstall the printer driver and firmware.  It also shows 'it can run out of toner' when I know that it is not. Cannot print page of test or anything else that he does not communicate with the computer. Help!

  Hey @cbloom57,

  Welcome to the Forums of HP Support!

  I understand that you have an orange light flashing on your Laserjet P1102w printer range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute. If you still see a flashing light orange, then the printer is more likely to have a recoverable hardware problem. This document explains How to resolve error lights on the printer.

  Please let me know the results after following the above. If you are able to clear the blinking light, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• P1102w stuck initializing after power off the printer

  Product: HP p1102w CE657A printer

  OS: Win - 7 64-bit SP1

  Error: printer not end initialization - time attention and ready lights flash simultaneously and continuously.

  I recently rearranged some furniture in my office and had to unplug all of my electronics in the process. After having everything plugged back to turn on the printer, it is stuck at initialization and will do nothing else.

  I tried the following, not necessarily in the order listed since I was in this for the better part of the afternoon:

  -Taking the wireless and Cancel buttons reset factory default has no effect.

  -I can't access it through the IP address, she had when I turned it off via a USB connection or wireless.

  -I can't print a configuration page to see if it has the same IP address.

  -Whisky.

  -J' uninstalled the drivers for my computer to reinstall the printer.

  -All attempts to reinstall the printer do not have the printer does not communicate with my computer via a USB connection, regardless of the method of installation (SmartInstall starts; installation CD or downloaded that both drivers get to a point where they want to make sure the printer is turned on and connected via a USB cable, and that's what I go with it.)

  -Blasphemy.

  -L' utility Dr. HP Scan can't find the printer and thus do not address it. He was unable to find the printer until the drivers have been uninstalled.

  -Try the steps above using two other computers in the House was just as frustrating and unproductive.

  The printer has not been abandoned, kicked or abused in anyway during the movement of furniture so it may not be the question.

  Similar problems were held with this printer during the summer when I bought my new computer and the printer was disconnected while I was moving some cords. The problem seemed to correct itself spontaneously and I have no idea how I work and what I've done differently.

  Any help would be appreciated.

  See you soon,.

  Boozerbear60

  Usually in this case, the printer does not have a sufficient amount of power. Make sure that the printer is connected directly to a wall outlet. If you are connecting to a lightning arrester, power strip, or rescued food, she is unable to get enough power to complete the initialization cycle. If it does not, follow the steps outlined in the document below the link to try to get the printer to answer. As a last effort before contacting HP on a replacement printer, do a hard reset. I'll post the instructions below. Let me know what happens.

  The printer will not turn on or respond

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• How do the initialization of the new hard drive in the macbook pro 2012 model

  I can't the initialization of a new WD hard drive in my macbook pro 2012.

  I installed the new drive and restarted with disk Warrior

  and followed the instructions to press option, command-R.

  When I followed the Protocol to download a new OS, disk utility does not see the newly installed

  HD, what to do?

  < published by host >

  Use disk utility to format drives, no Warrior drive

  How to install OS X on an external drive connected to your Mac - Apple Support

  Drives external Mac OS Extended format before using with Aperture - Apple Support

  http://support.wdc.com/knowledgebase/answer.aspx?ID=1362

• initialize a new hard drive 2009

  I have a Mac Pro (2009). After you install a new 2 TB HDD, I get a message saying that it is "not initialized". The computer does not recognize the HARD drive give me a description of its specifications, but won't initialize.

  After the execution of first aid in disk utility, I get a green check mark and 'operation complete', no error messages.

  Now what should I do?

  Initialize, I don't see any claim that you have.

• Cannot initialize the service of guard dog

  Since doing a reinstall of El Capitan (10.11.5) yesterday on my Imac, I was see the following in the system log every 10 seconds. I didn't know that before the update. I was wondering why this process is necessary and why he's stuck. Anyone else seeing this?

  01/07/16 7:57:37.390 AM watchdogd [9893]: [watchdog_daemon] @(wd_watchdog_open) - IOIteratorNext failed (kr = 0)

  01/07/16 7:57:37.390 AM watchdogd [9893]: [watchdog_daemon] @(wd_daemon_init) - could not open connection with the watchdog of the kernel

  01/07/16 7:57:37.390 AM watchdogd [9893]: [watchdog_daemon] @(main) - failed to initialize the watchdog service

  01/07/16 7:57:37.391 AM com.apple.xpc.launchd [1]: (com.apple.watchdogd) Service worked only for 0 seconds. Push the respawn in 10 seconds.

  01/07/16 7:57:42.517 AM com.apple.xpc.launchd [1]: (com.apple.dpd [9892]) Service came out with abnormal code: 75

  you run OSX server?

  Mac OS X Server: about the monitoring process

  See this post and proceed as you see fit

  http://www.tonymacx86.com/threads/watchdogd-watchdog-service-initialization-ERRO rs.145664.

• During installation, download "error!" Cannot initialize the plug-ins directory.

  Has started having problems when opening Firefox and trying to make Firefox the default browser. Windows 7 update and update AVG virus scan clean, updated MalwareBytes and scan clean. Troubleshooting finally brought me to uninstall and try for a clean install... normal Windows 7 uninstall process successful. Is that Firefox folder in "Program Files" has been deleted. Download "DownloadApp_1_7_5_198_Setup" (29 442 KB) of the Mozilla Web site and run... "error!" Cannot initialize the plug-ins directory. Please try again later. »

  http://www.bleepingcomputer.com/forum.../error-cant-initialize-plug-ins-directory-please-try-again-later/
  What are the permissions on your Temp folder?

  Look to see if there are a few cases on this point, brb.

• Start Thunderbird pop - up said "could not initialize the security component.

  Hello
  Thunderbird started the following window pops up suddenly. No problem during the morning session.
  Draw the attention of
  "Could not initialize the component of application security.
  The most likely cause is problems with the profile of your application directory.
  Please check that this directory has no read/writerestrictions. ETC.»
  I checked in the T / B profile folder.
  'Certificate Mgr' window is empty (no ads).
  So is the window "Mgr Device.
  I couldn't find the mentioned restriction "read/write".

  http://KB.mozillazine.org/Could_not_initialize_the_browser_security_component

• Disk utility to initialize disk 4TB TB 1.8

  I bought a new 4 to hard drive (no SSD or Fusion), I put in a box external firewire (replaced the 1 TB drive in my Maxtor OneTouch III).  I powered up the Maxtor, disk not recognized (obviously), and OSX wonder to initialize the disc and sent it to me in disk utility.

  Problem is the only utility disk only sees it as a hard drive on '1.8 to' before the entry into force.  Therefore, any initialization, put in shape or partitioning happen in 1.8 TB.

  I'd like to partition the drive into partitions 4 x 1 TB.  Is it possible to do this?  What is a limitation with the box of Maxtor?  What I have to remove the disk and partition first in a dock HARD drive then back to Maxtor, where limiting with El Capitan or disk utility itself?

  I'm happy to dive into the terminal, if necessary.

  List of $ diskutil

  / dev/disk5 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.8 to disk5

  1: EFI EFI 209.7 MB disk5s1

  2: Apple_HFS 1.8 Untitled TB disk5s2

  Thanks for any help.

  If it finds that the disc is less than 2.2 to in an external enclosure, the envelope is too old, or has failed.

  Macs have supported the drive well beyond this size since 10.4.4.

• shock wave. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder

  Shockwave for Director 12.1.1.151 does not start, just with that. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder. Reinstalled but made no difference. If you can help would be grateful. Thank you.

  I restored my computer to an earlier version, installed latest version of firefox and the Shockwave for Director, everything is fine now. Thanks for your help guigs2.

• / System/Library of the El Capitan initialization process

  Hello

  When I list all processes that are running on my mac os session, it shows me tons and tons of process/System/Library, associated with "Image Capture", "AOSKit", etc. Is this normal? I did not remember to initialize?

  I only Chrome, BetterTouch, promotion, F.lux and Terminal programs open and my consumption of memory is almost 4 GB!

  Where do I can disable these processes to automatically initialize or are they part of the execution of the El Capitan?

  Thanks in advance,

  Guilherme

  You don't have to initialize a process to make it appear. The operating system initializes dozens of processes related to the computer running and providing all the necessary services.

  Consumption memory is not directly related to how much apps that you launch. The reserve system of large chunks of memory to improve performance and have the available memory as needed. OS X will try to predict what future memory needs will be.

  Do not attempt to disable any process, if you don't know what they are for, or if they are needed. It's a sure way to crash the operating system. What you see in the activity monitor, is to help developers, technicians and others to know what works and if it's causing a problem.

  Simple rules: if it works then leave it alone; and, if you don't know what's going to happen and how to fix it, then let it be. If you want to learn more about these different processes, then try searching with Google for this information. However, if you are not a programmer you will find difficult to understand information.

• The attention! "Could not initialize the component of the application security...". »

  I started receiving this alert after restart last Saturday (22/02/2014) and freezes before Thunderbird it is fully operational: (incorrect application behavior?)

  Could not initialize the safety component of the application. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features.

  I have over 500 GB free on the hard drive and have checked the TTBOMA directory. As recently as this
  morning I still once uninstalled using TB TB uninstall utility, rebooted and reinstalled from the Mozilla Web site. Nada,.

  Toshiba Satellite L875D
  Windows 8

  Troubleshooting Info:

  Thunderbird
  Version 24.3.0
  User Agent Mozilla/5.0 (Windows NT 6.2; WOW64; RV:24.0) Gecko/20100101 Thunderbird/24.3.0

  Any help out there?

  Delete the file cert8.db in Thunderbird profiles folder.
  
  This will remove all the intermediate certificates Thunderbird has stored.

  • http://KB.mozillazine.org/Profile_folder_-_Thunderbird
  • https://support.Mozilla.org/KB/couldnt-initialize-applications-security-component

• Not able to initialize the application security... Tried to rename cert8.db and secmod.db. Profile has access r/w. Always get the message. Can be run as an administrator

  Could not initialize the safety component of the application. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features.

  Above the messa4bite error occurs whenever I have stars Firefox without admin priv. Checked the directory of the profile listed to solve problems of information - is r/w for system, admin and homes tried to rename cert8 and secmod as suggested following a forum. Problem persists. \
  My computer is running Win 7 Home Premium 64-bit

  New profile worked! Thank you.

• Slow to initialize at startup Ethernet

  Lately, at the start, my mac connects to the network. It is wired for good than ethernet, but for some reason it takes a long time for the internet initialize; Sometimes the minutes. No problems one after the connection is established and AHT has not revealed internal hardware problems. Below are the specs for my machine. I use a modem arris and an Airport Extreme. Don't know if the problem is in the router and do not know how to test that. The delay seems to increase over time. Advice?

  

  Network Utility.app (included on your Mac) can show you the speed and meter real connection to any network connection error.

  If this is not present in

  / Applications/utilities

  It is located in:

  / System/Library/CoreServices/Applications

  Your connection should be at the expected speed and there should be no more than a handful of initial errors and no reason continues to errors.

  

  .

• LaserJet p1102w, windows 8.1, prints, but reports error

  My laserjet P1102W prints fine wireless, but an error every time.

  Yes, I reinstalled the latest version of the installation software. Yes, I tried printing doctor, he found nothing.  Yes, I downloaded and installed the latest drivers from that date.  Yes, I tried the tool which is supposed to find the latest drivers he, he did not support this version.  Yes, I looked at the ethernet configuration and it was fine - I'M able to print as I said.

  No, none of this has worked.

  I receive the error message in the upper right of the screen whenever I try to print.  All that says is that the printer cannot print the file.  Yes, this happens since the print spooler.

  So, what's next?

  Hi @draythomp,

  I see by your post that you are able to print on the wireless network, but you get a message error "the printer can print the file. You have successfully updated the software of the printer with the same results.  I can help you with this, but I need more information.

  This error appears when printing from any application?

  Meanwhile, empty folder of spool and restart the print spooler.

  How to clear the current print queue in Windows Vista and Windows 7.

  You also update the firmware of the printer?

  If this isn't the case, then I would update the firmware to see if this will help. This, although by a USB connection.

  HP LaserJet Pro P1102w printer drivers.

  Select your operating system, click Next, click the link for the firmware.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  Good day!
  Thank you.