Initialize sound on Y-series
Curious to know if anyone has any prior knowledge on noise start on lenovo y-series (perhaps of other models as well) computers laptops it is not pregnant associated... it's like some futuristic tron-like super robot who awakens from sleep of its type, and it is very low... What makes the sound?
Yes nvm, I discovered that it is the drive making this noise... lol
Tags: Lenovo Notebooks
Similar Questions
-
Low sound on speakers series Equium
Hello
I got Equium with true surround sound XT model. I bought external speakers with a sub. The problem is that the sound that comes out is poor.
My speakers are good coz I tested on my dads laptop computer and it was perfect and strong. The bass level is so quiet and the sound itself on my laptop and I don't know what to do to amplify it upward.
All parameters including those on the speakers.
Can anyone help?Equium notebook series has four different a notebooks. It will be interesting to know is you. Tell us a little more on the OS you are using. Is this recovery or your own installation image?
-
XP audio driver does not work on Satellite P100-106
I reinstalled Windows XP on my Satellite P100-106 and all the works of good drivers.
Only the audio that I can not install driver.
The problem is that my sound card changes the name, and I don't really know how his happened?His name was sound card Conexant high definition and now its something to gibrish... (something not readable)
http://i44.Servimg.com/u/F44/12/54/24/92/error10.jpgI tried to remove the material in the hardware Manager, but again, the name is always the same.
So, what should I do?Thx a lot eric.
It seems that this has been resolved before, look for the satellites «Sound P100» P series
-
Hello
First of all that I must say I just starting with control of the instrument using Labview. For this reason, it is possible that the problem I have is easy to solve. However, I am looking for any solution for the forum, but unfortunately I can't fint anything.
While the situation is this: I'm looking to plug a power Analyzer (Yokogawa WT1800) with the PC through GPIB. To achieve this, I use the USB/GPIB Interface of Agilent 82357 B. The connection is done correctly because I can see and communicate with him through the Explorer NI MAX.
In order to achieve control of the instrument using Labview, I downloaded and installed the driver of Yokogawa WT1800 (Driver instruments ykt1800) using the NI Instrument Driver Finder tool. The problem I have is that when I run the examples, I find the following error message:
Error 1073807330 has occurred to the property (arg1) node in Yokogawa WT1800 Series.lvlib: Initialize.vi-> Yokogawa WT1800 series continuous measurement Normal.vi
Possible reasons:
VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not taken in charge as defined by the resource.
I tried to change the input of the open Visa arguments vi because I think that this is where is the problem, but I can't reach any solution. The following image is attached to the block diagram of the initialize.vi:
Any help is appreciated.
Thank you.
I suspect the redirect property. Try to remove it.
-
Implement pickits.dll in LabVIEW
Hello
I have problems with the pickits.dll chips. I want to implement the dll file in Labview and communicate with a material called Analyzer series of LIN of microchip.
When I run my Labview VI, it cannot communicate with the device.
It comes to my composition in Labview that does not work.
This composition is created on an OS WIN7/64 bit and a system 32-bit/WIN XP. The two does not work.
The Analyzer is run with the chip Network Analyzer(64bit) demo application.
I downloaded the LIN Serial Analyzer Update v2.05 (64-bit) of the homepage of the electronic chip and with this application, it works.
The pickitS.dll works inside LabView correct. When I run the Prototype of the "Get_PickitS_DLL_Version" function, it returns the correct Version of the DLL.
Is my composition in LabView, right?
Any that work with the Analyzer series of LINEN or similar devices of microchip?
concerning
Hello
I solved the problem. For initialization of the FLAX series Analyzer, you have to take the ' base' constructor and the 'Initialize_MyDevice' method with the parameters USBIndex = 0 and ProductID = 0xA04. With this basic adjustment, you can initialize the device. Then you must set the baudrate of 19200 for Bus LIN.
Feel free to ask me if you have problems with your device.
-
Acceso directo a sin cabina switch support
Hola a todos
Me ha EDI a compañero as en UN evento cierto very letras, dijeron that vmware manufacturer none that supports fibra entornos no tengan los por medio switch, decir los vayan directly connected host has the cabina. ¿OS sounds that can ser cierto? o well mas como UN farol para yo pienso that include extra pass?
Yo pienso that if el esta hard en hcl, soporte of da VMware.
Gracias!
VCP 410
Mira esto:
Fiber Channel without
For SAN Fiber Channel, if listed, VMware supports the following configuration, the bottom of page otherwise unless:
Basic connectivity - the ability of the host ESX to recognize and
interacts with the storage array. This configuration does not allow
for multiple paths or any type of failover.
Multipathing - the ability of ESX hosts to manage multiple paths to the same storage device.
HBA failover - in this configuration, the ESX host is equipped with
several HBAs connect to one or more SAN switches. The server is
robust to HBA and switch failure only.
Failover storage Port - in this configuration, the ESX host is
attached to multiple storage ports and is robust to storage port
failures.
Boot from SAN - in this configuration, the ESX host boots a LUN stored on the San rather than a local disk.
+ Direct Connect - in this configuration, the ESX host is directly
connected to the Bay. There is no switch between HBA and the table and
each HBA should be connected directly to a port on the storage array.
Multiple storage ports also known under the name of FC target port on a single fiber
Channel-Arbitrated Loop are not supported; as a result, Garland of
ports of storage within a storage controller, overall storage controller, or
across several arrays are not supported. Windows failover clustering is
not supported in this configuration. +
Viene HCL:
Click on "Click here to view introductory information" en casi al final.
If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!
-
Need advice for speakers or sound system for Satellite L series
Please advice or speakers acoustic system for L-series satellites
Hi Svetlana
It will be interesting to know what model of laptop you have exactly. Anyway, it is not easy to make good suggestion because in the market, there are many good external sound systems and especially the good one are a bit expensive.
In my opinion, you should talk with your dealer and see in what price you want to buy speakers. Without a doubt, my favorite system is Logitech Z3.
Good bye
-
P series too hot and sound card problem
Hello
in recent weeks, I have a problem with the temperature. The P series of satellites is much too hot, even if only the essential progs are running, the processor runs with 100% very often. Without the Task Manager (to close the CPRS) of "windows" the machine crashes several times down!
And since I've updated the driver sound in August this year, the sound may not be performed correctly. The sound card is not identified by diff. progs. MP3 direct cut and sound blaster, during the race.
I can't save anything! So bad!Hello!
Clean the laptop? You can use spry compressed air could blow the dust from the cooling fans. So do not disassemble anything.
Which audio driver use? Toshiba or manufacturing as Realtek? Maybe there already is a new or try again with the old driver.
Moreover, what Satellite phone do you have?
Good bye
-
Input series table 2D Element replacement and re - initialize the problem
I have a project with data from a microcontroller PIC18f is the streaming of data via USB. Incoming data in LabVIEW are delineated in a way and replaces a line in a table of data of 9 x 6.
The issue I'm having is that every line I want to update, updates correctly, but all other lines re - initialize to zero where I like to keep all previous data in the other lines in addition to the line newly updated. The reason why I update to each line, it is that the serial data from my microcontroller have a max buffer size it broadcasts in LabVIEW with certain delimiters that will recognize for each row/column and update the data in the corresponding cell of the program in LabVIEW (but he does by deleting also all other entries which is not what I want!).
I use the registers at offset and the problem still persists. Attached is my code and to emulate my series string driveway, I copied and pasted my data series are lower. So all he must do is to change between the different channels in the "chain Indicator (display Hex) of entry that the program is running.
Any help would be greatly appreciated! Thank you
Candice
Chain 1:
:1'1,11B0:1'1,2FFA0:1'1,33DD0:1'1,40:1'2,11A0:1'2,2B0:1'2,340A0:1'2,4380:1'3,1FFFF:1'3,2FFFF:1'3,3FFFF:1'3,4FFFF:1'4,1FFFF:1'4,2FFFF:1'4,3FFFF:1'4,4FFFF:1'5,1FFFF:1'5,2FFFF:1'5,3FFFF:1'5,4FFFF:1'6,1FFFF:1'6,2FFFF:1'6,3FFFF:1'6,4FFFF
Channel 2:
:2'1,1330:2'1,2FFF0:2'1,33DF0:2'1,4700:2'2,1FFFF:2'2,2FFFF:2'2,3FFFF:2'2,4FFFF:2'3,1FFFF:2'3,2FFFF:2'3,3FFFF:2'3,4FFFF:2'4,1FFFF:2'4,2FFFF:2'4,3FFFF:2'4,4FFFF:2'5,1FFFF:2'5,2FFFF:2'5,3FFFF:2'5,4FFFF:2'6,1FFFF:2'6,2FFFF:2'6,3FFFF:2'6,4FFFF
Channel 3:
:3'1,1FFFF:3'1,2FFFF:3'1,3FFFF:3'1,4FFFF:3'2,1FFFF:3'2,2FFFF:3'2,3FFFF:3'2,4FFFF:3'3,1FFFF:3'3,2FFFF:3'3,3FFFF:3'3,4FFFF:3'4,1FFFF:3'4,2FFFF:3'4,3FFFF:3'4,4FFFF:3'5,1FFFF:3'5,2FFFF:3'5,3FFFF:3'5,4FFFF:3'6,1FFFF:3'6,2FFFF:3'6,3FFFF:3'6,4FFFF
Rope 4:
:4'1,1FFFF:4'1,2FFFF:4'1,3FFFF:4'1,4FFFF:4'2,1FFFF:4'2,2FFFF:4'2,3FFFF:4'2,4FFFF:4'3,1FFFF:4'3,2FFFF:4'3,3FFFF:4'3,4FFFF:4'4,1FFFF:4'4,2FFFF:4'4,3FFFF:4'4,4FFFF:4'5,1FFFF:4'5,2FFFF:4'5,3FFFF:4'5,4FFFF:4'6,1FFFF:4'6,2FFFF:4'6,3FFFF:4'6,4FFFF
Channel 5:
:5'1,1FFFF:5'1,2FFFF:5'1,3FFFF:5'1,4FFFF:5'2,1FFFF:5'2,2FFFF:5'2,3FFFF:5'2,4FFFF:5'3,1FFFF:5'3,2FFFF:5'3,3FFFF:5'3,4FFFF:5'4,1FFFF:5'4,2FFFF:5'4,3FFFF:5'4,4FFFF:5'5,1FFFF:5'5,2FFFF:5'5,3FFFF:5'5,4FFFF:5'6,1FFFF:5'6,2FFFF:5'6,3FFFF:5'6,4FFFF
Channel 6:
:6'1,1FFFF:6'1,2FFFF:6'1,3FFFF:6'1,4FFFF:6'2,1FFFF:6'2,2FFFF:6'2,3FFFF:6'2,4FFFF:6'3,1FFFF:6'3,2FFFF:6'3,3FFFF:6'3,4FFFF:6'4,1FFFF:6'4,2FFFF:6'4,3FFFF:6'4,4FFFF:6'5,1FFFF:6'5,2FFFF:6'5,3FFFF:6'5,4FFFF:6'6,1FFFF:6'6,2FFFF:6'6,3FFFF:6'6,4FFFF
Line 7:
:7'1,1FFFF:7'1,2FFFF:7'1,3FFFF:7'1,4FFFF:7'2,1FFFF:7'2,2FFFF:7'2,3FFFF:7'2,4FFFF:7'3,1FFFF:7'3,2FFFF:7'3,3FFFF:7'3,4FFFF:7'4,1FFFF:7'4,2FFFF:7'4,3FFFF:7'4,4FFFF:7'5,1FFFF:7'5,2FFFF:7'5,3FFFF:7'5,4FFFF:7'6,1FFFF:7'6,2FFFF:7'6,3FFFF:7'6,4FFFF
Channel 8:
:8'1,1FFFF:8'1,2FFFF:8'1,3FFFF:8'1,4FFFF:8'2,1FFFF:8'2,2FFFF:8'2,3FFFF:8'2,4FFFF:8'3,1FFFF:8'3,2FFFF:8'3,3FFFF:8'3,4FFFF:8'4,1FFFF:8'4,2FFFF:8'4,3FFFF:8'4,4FFFF:8'5,1FFFF:8'5,2FFFF:8'5,3FFFF:8'5,4FFFF:8'6,1FFFF:8'6,2FFFF:8'6,3FFFF:8'6,4FFFF
Channel 9:
:9'1,1FFFF:9'1,2FFFF:9'1,3FFFF:9'1,4FFFF:9'2,1FFFF:9'2,2FFFF:9'2,3FFFF:9'2,4FFFF:9'3,1FFFF:9'3,2FFFF:9'3,3FFFF:9'3,4FFFF:9'4,1FFFF:9'4,2FFFF:9'4,3FFFF:9'4,4FFFF:9'5,1FFFF:9'5,2FFFF:9'5,3FFFF:9'5,4FFFF:9'6,1FFFF:9'6,2FFFF:9'6,3FFFF:9'6,4FFFF
Hi Candice,.
Try the attached VI. I think that the while loop loops for each row (?) If so, you need a set longer shift registers at the border of the while loop.
I hope that helps!
-
After replacing a lost critical system file, I can now initialize & get online, but I have no sound. How can I activate the sound back?
original title:. Its Windows XP problemHi Delno,
I suggest to check the connection of the wires to the speakers and then follow the steps in the article.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Let us know if that helps.
-
No sound. HP pavilion g series
the sound on my hp pavilion g series has stopped working even with headphones. This happened after my computer automatically
Go to the section of support & drivers hp laptop sound driver you download and install it. Let us know if you get her back.
-
Apparently, I disabled my soundcard by rt clicking on the speaker icon in the status bar on bottom screen rt system. Then I deselected the output device and selected the option helmet on the reading tab. I am getting no sound using headphones or my internal speakers. Now hovering above the "speaker" icon says no audio output device is installed. On the reading tab, I now have only the headset option. I have changed nothing. I use Windows Vista Home Premium on a laptop Fujitsu Lifebook series A. helping, please? THX.
Thx for the help, in my particular case uninstall the sound card and then restarting solved the problem. It's a much simpler solution. THX Tho!
Howlin' -
My gateway has this integrated graphics of generic-sounding of Intel Corp., the '828645G', alias the 845G series, and I'm looking all over the Internet to a graphics driver that matches or is compatible with, my driver. I want to run Aero, but when I finished solving display problems I get a solution indicating that he can take care of Aero, but a display of Windows (WDDM) driver Module is required for Aero is taken into account. I have valiantly looking for Vista/7 drivers and has seen many others who would potentially cause my precious gateway to self-destruct, essentially. Any ideas where I can get the drivers compatible or similar for Windows 7 32 - bit, running on a portal designed for XP?
If neither gateway nor Intel has drivers on their website, then there would be none.
-
Please check the sound initialization,
sounds dirty when start using the sound...
Please fill in a bug here report: http://bugbase.adobe.com/
Please include a link to a URL/SWF which reproduces the problem and details on the system where you have the problem.
-
Ok... I recently bought a laptop that had some viruses... So, recently, I have completely swept away my laptop Sony VAIO (model name-VPCEH1AFX) and started from the factory settings. It seems to be back to normal, but he's doing a quick series will beep when I turn on the computer. Randomly, he makes noises in two quick beeps and beeps extended. It sometimes lasts a minute, but it can take up to 5 minutes at a time.
The only difference with before reboot (that I have noticed so far) is... (1) I can't use the mouse to copy and paste... it is as if the mouse settings are pushed. (2) some games do not completely load right... as the option menus are able to be seen but not used. (3) on the beep. (4) it seems that I've lost a driver or something.
I have read a few forums and studied the * outta this noise and have read that this could be the BIOS, or a harddrive out or something of this nature. I scanned everything I could think of to analyze and what she says goes and is up-to-date. I'm not an expert in computer science and REALLY need some (simple as possible) record... lol... I use this laptop for personal use and linked work use... Please help...
Alright. You can try to control your system and see if it will produce freeze any error, momentary, or everything that happened around a minute before or after the sound signal will sound. Also, try to reset your BIOS to its default settings. Good luck.
Maybe you are looking for
-
Firefox does not start after the 3.0.1 update
I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I can't open Firefox. It is not like the other problems "Does not", because in the Task Manager, firefox.exe appears, then disappears instantly. I tried in
-
Peripheral Bluetooth appears only not on the Satellite P300-11W
Hello I just bought the Satellite P300-11W (Win Vista Prem) and tried for a weekend to set up the bluetooth device. I installed the BT-monitor for several times.I can't find my internal bluetooth device in Device Manager. Therefore, I can't use bluet
-
I have a new MacBook and the safari application is not responding. A new window does not open and it won't force quit or close with optn + cmd + esc. It won't let me close my laptop while safari is always open.
-
How to force multiple instances of a process or program to run under XP?
Sometimes, several instances of a program can execute without the user does something special, for example, you can open several instances of the Adobe Reader software if you click on the names of different files (but if you click directly on the .ex
-
Rundll error message C:\windows\exokukakadi.dll
This loading error message keeps coming back when my office opens specifying this module is not found-is 1 a file real liberary for my system or is - something else as our secuity mallware is AVG-we run the scans-what do auto I need to repair-thanks