Initpki.dll missing on Windows Vista Home Premium 64-bit. How to solve this problem?
I'm running on Windows Vista Home Premium 64-bit. I tried to sign in to Windows Live Messenger and the Code error 80048820. I'm not able to check on my Windows Update as well. I finally discovered Miss me my files initpki.dll, checked on C:\Windows\System32 already. What should I do?
- What happens when you try to install Windows Update?
- What error is it receives?
- How did you find that the file 'initpki.dll '?
I suggest you to reset the windows udate component. Do follow link below:
I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another? Thanks for any help on this.
1 did you change on your computer before this problem?
2. when exactly you receive error message?
You can follow the methods and see if it helps.
Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
(a) click Start .
(b) in the search box type command prompt.
(c) right-click and select run as administrator of .
(d) type ping 127.0.0.1 and ENTRY.
If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.
Check to see if the problem exists in safe mode with network.
Start your computer in safe mode
Alternatively, you can try to reset TCP/IP and then check if it helps:
How to reset the Protocol Internet (TCP/IP)
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Is there a place to find serscan.sys on a laptop Toshiba Satellite A305, running Windows Vista Home Premium 64 bit? My Installer to connect wireless to a new HP Officejet Pro 8600 wireless all-in-one printer-scanner-copier-fax machine tells me to find this program, but I can't find it on my hard drive. I received no installation CD of Windows Vista with this computer when I bought it new. Any help in finiding or serscan.sys getting and get the printer installed and running is greatly appreciated.
Follow the steps outlined in the document below. Let me know what you find?
Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic). After a month of looking for the installation Service, I finally found that a group of 10 files and among them was this executable filex86_microsoft-windows-p... installerandprintui_31bf3856ad364e35_6.0.6002.18005_none_d83fb8abf30e1638_printui.exe_bb673fffIf these are the files I'm looking for, what should I do to get them back to where they should do? Any help would be appreciated...
System Mechanic is your troublemaker & you have lots of company! 
See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180
If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.
TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx
I am not able to download and install Windows Vista Home Premium 32 bit windows update. This Gateway laptop has always been able to quickly and easily install the update by clicking windows update. However, since the introduction of Windows 10 it has been a lot of your time trying to install updates. I had this same problem with Windows 7 too. Never before there was no problem for the two operating systems. Installation of Windows updates has always been easy and fast without any problem. Running the troubleshooting isn't good and hunting error codes has been unproductive. What the hell is happening?
Hi Joe Cool1:
'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems. The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.
There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista. The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.
You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/. Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.
32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v220.127.116.11 * MMFA Premium v2.2.1
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS
Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?
According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:
"You must update the following plugin:
- Adobe PDF plugin for Firefox and Netscape 8.2.6
- Check your plugin versions on one of the following links:
- Note: plugin check page lacks information about all versions of the plugin
- Update of Adobe Reader (PDF plugin):
- Within your existing Adobe (If you have already installed) drive:
- Open the Adobe Reader program in your list of programs
- Click Help > check for updates
- Follow the instructions to update
- If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
- Download the full installer (If you have NOT installed Adobe Reader):
- SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
- Use one of the links below:
- https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
- See also the download link': http://get.adobe.com/reader/otherversions/
- After installation, launch Firefox and recheck your version.
- Within your existing Adobe (If you have already installed) drive:
My computer has an operating system of windows vista Home premium 64-bit. When I try to get updates, there is a message error code: 8000-ffff. How to solve this problem?
My computer has Windows Vista Home Premium 64 - bit operating system. When I try to get updates, there is an Error Message Code 8000 ffff. How fix/resolve this problem?
Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
How to reset the Windows Update components?
[Launch the difficulty mode by default and aggressive , if necessary]
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version. Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure. The two boards have same chipset and form factor. Can I just replace the Board of Directors without having to reinstall windows? Do I need to install new drivers? I do not have a CD installation or installation key, Microsoft would provide a key if necessary? Is there a link I can reference for replacement MB / install?
Thanks for you help!
OEM license is linked to the original version of the motherboard, it is M2N68 - LA. You lose OEM 'rights' when you have changed the Council.
Why can not download and install updates from Windows Vista Home Premium 32 bit?
Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:
WinVer the OS details appear. If no SP1, download & install it
Use this link for download.
This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'
Hello! Can someone tell me how can I make Windows Vista Home Premium 32-bit to 64-bit?
Here's my question: -.
1. I bought a version of Windows Vista Edition retail family Premium, the package has only the 32-bit support (DVD). I found a few website say that the product key for the retail version of Windows is for 32-bit and 64-bit, as long as we use 32 - bit or 64 - bit on a single computer at a time. If I'm wrong, anyone could answer my question?
2. now, I plan to move from 32 bit to 64 bit, my problem is that the version sold at retail of Windows that I purchased only contain 32-bit media:-
(a) is there a way I could install the 64-bit Windows?
(b) is it possible I could get 64-bit support?
(c) could I use media in Windows Vista Home Premium 64-bit retail a friend to install on my computer? And after installation, I can activate Windows with my product key?
Looking forward to the responses, thank you.
Do you a clean install from 32 bit to 64 bit.
Link above is how you get 64 bit DVD, if you have a retail license.
You can use any Microsoft Vista 64-bit DVD and use your 32 bit key as you say it's Vista Retail
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
MS advice on the conduct of clean install.
A tutorial on the use of a clean install
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon...
Mick Murphy - Microsoft partner
I have a laptop Dell Insperion 1501 with Windows Vista Home Premium 32 bit. I tested the ram and hard drive and they check well. I deleted the C partition, formatted the drive with the dell windows vista disk and reinstalled vista. Then I tried to download the updates of windows, but when I click on any button for example, the Start button, it flashes opening and closing in a fraction of a second. Also, when it starts, he won't on the desktop unless I have a key on the keyboard, any key. I can't seem to update of the bios at the moment is still as dell reference years ago. No error messages or bios beeps. I was able to install all the drivers on the driver disk but can not get updates. This also happens in safe mode. Any suggestions? Thank you.
Guess what! It is the keyboard that was causing the problem. I disconnected and used a USB one and it works normally. I guess her grandchildren or the cat must have stuck a key on the Board. When the computer is off, lightly rub your palm on the keys to reset.
Im running windows 7 Home premium on opus 64-bit system. Can I upgrade to windows vista Home premium 32-bit...
This is not an upgrade from Windows 7 to Vista.
It is a downgrade that Vista is the previous operating system before Windows 7 came out and you would have to BUY a COMPLETE of Vista version and do a fresh install of Vista; but before you buy Vista, check first that your computer manufacturer provides the Vista drivers for your model computer.
Microsoft sells more Vista; Try Amazon.com.
See you soon.
I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
Can someone help me, please?
Welcome to the community Microsoft and thanks for posting the question.
According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.
1. what happens when you try to install, summers - get you any error message or error code?
2 is the issue limited only during installation AutoCAD?
3. have you made changes on the computer before this problem?
I suggest you to see the steps in the following Microsoft article and check if it helps.
Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0
Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
I have a product key, but need Windows vista Home Premium (32 bit) ISO because I lost the part recovery partition
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
See you soon
I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?
1. what happens when you try to install Windows Update and the fix, you get any error message or error code?
2 have you made changes on the computer before this problem?
3 is the limited issue during the installation of specific updates?
Problem when installing windows update, see the following Microsoft article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602
The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Keep us informed on the status of the issue.
Maybe you are looking for
How to create a recovery for OSX on an existing SSD partition?
I quit the game rather than close. Now when I start the computer it asks for my password. It has my username. I don't remember what is my password. I tried everything I can think of. Until I do that, I can't use my computer. I don't know how to go be
My friend has a review of his email and a screen poped up to say it was repair XP and proceeded with the analysis of its system. He noted that he had 11 hard and memory problems. He was motivated to buy a high grade for $90.00 program which would fix
Stuck with a log in window on XP system. Had a problem with the thugs, XP Security 2012. My administrator password is no longer accepted. (I wrote it and also have a safety question.) How can I connect?
The HP firewall intervenes and asks if I want to accept or deny programs requesting access to the laptop... it's good... but a Trojan horse (updater.exe) after I deny access, comes back every 15 minutes... 5 or 6 active applications if ignored... tir