Injector for a WAP551

Do the a SB-PWR-INJ1-NA can power a WAP551?  Someone can certify this information.

I'm using a few SB-PWR-INJ1-EU in power suplly to WAP561 using U/UTP kat.  5th cable - so far without problems.

Tags: Cisco Support

Similar Questions

  • FireWire expansion for Touchsmart 610 1130f

    Hello

    I have a 610 1130f Touchsmart, I would install a firewire port. Motherboard card I see I have available pci expansion slots, also other posts, I think this pci card is the injector for installation (for the other model touchsmart at least)

    StarTech.com 2 Port 3 b 1 a 1394 Mini PCI Express FireWire adapter card

    My question is, I am correct in my research this pci card will install on my system and if so where do the firewire install ports. It doesn't seem to be any on the body of office expansion slot (side or rear) am I missing something? or someone has one of these adapted? Thanks for all the answers in advance.

    In theory, this card would allow your Touchsmart computer with Firewire ports. However, the card is really designed for a traditional desktop computer. The card would fit into the mini-map PCIe slot, and you would have to cut a hole in your case to get the ports on the outside. Also, the map seems to use a power plug style IDE to get power / extra power to your system and it does not appear to have. If you are comfortable to change and adapt your TouchSmart for such a facility, it should work.

  • PoE to power a switch

    Does anyone know of an Ethernet hub or switch that can be powered from Power Over Ethernet?  I have a location without electricity but with an Ethernet jack.  This would allow me to extend the network there without having to invest in the walls of the electrician and opening etc.

    Thank you.

    There are switches that can provide Poe or be powered by PoE equipment (such as Netgear and TP-Link) network suppliers. It is also possible to use a separate PoE injector for the provision. For switches/routers without possibility to be powered directly by PoE, a PoE splitter can offer an alternative solution. There are some limits of voltage and current (and temperature) that must be respected. In addition, always check the construction and electrical instructions for your country.

  • Questions of POE with N2048P

    We have recently made switches N2048p in our building to replace our aging switches Cisco 3750 G and ran into problems with the POE.  We have some devices that work perfectly well with the Cisco switch but will not turn on not with Dell switches.  Most of the devices in question is AAstra 6725IP phones, and about a third of them will not be running at all.  The N2048 shows "test failure" on the status column with a 'view the inline power '.  We are on the last 6.2.0.5 firmware and the latest firmware on the phones.  This is also an impact on our building access system as it sinks of POE as well.  I contacted AAstra, but they have been so far little assistance.  Someone else had the same experience?

    We ended up buying POE injectors for phones of the problems.

  • C1250 AP required using POE power

    Hello

    I have questions about the AP C1250.

    -What are the energy needs POE for the AP and the Cisco 3560 and 4900 is the correct POE power to support?

    -Also, should I get the injector of power to power the switch online usage? Another word if PoE, can I connect the Ethernet cable between the switch port directly into the Ethernet port on the AP without the power injector?

    Really enjoyed for more information.

    1250 with a single radio or 802. 11A / n and 802.11bg / n

    15.4

    1250 with two 802. 11A / n and 802.11bg / n radio *.

    18.5W

    Basically you can use the 802.3af switch power to 1250, as long as you have the intention to use only 1 radio. If you did, it there would be no power injector and here for the AP could have just an ethernet cable from the ap to the switch.

    However, if you plan to use two radios, power exceeds 15.4 (802.3af maximum) which means that you will need to use a special power injector for it or the power room. Otherwise, I think that there are a few switches that support this 'high power' mode, but I don't know what they are...

  • Bing dynamic theme has stopped working.

    I had recently installed the Bing Dynamic Theme for Windows 7. The theme worked properly and I loved. However the next day of the day where I had it installed I noticed it sitting on an image instead of change. I went to control panel to check the personalization settings when I clicked on the solid Bing Dynamic screen replaced by a black background theme. After this point, I tried to uninstall and then reinstall the Bing Dynamic theme. When I reinstalled the theme it does not allow me the RSS and everytime I tried it continues to apply only the solid black backround. After the reinstallation, I'd go to in the Desktop Backround options and could see that the location of the photo has been set on solid with selected Black color. He had an additional option in what appeared to be the injector for the dynamic bing that resembled the theme server address. However, whenever I would choose it I would get an error.

    After looking around for some answers, I found this post.

    http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/d5805d09-8479-47C5-bdf8-f4286c5af9be

    I followed these instructions, thinking I might have a similar problem. After you run the fix the theme still does not work. The only change he seemed to do, is that I have more to select the theme server in the location of the image after selecting the bureau backround.

    Sorry for the long winded post, but I thought the more detail the better.

    The long and short of it is Bing dynamic Theme worked. Then it stopped working and when you try to reinstall I no longer get the option to allow RSS feeds. Bing dynamic theme is sitting on a black background and even with reboots and waiting no image is never downloaded.

    Thanks in advance for any help.

    Bing Dynamic vs Piriform CCleaner - Community Forums:
    http://Forum.Piriform.com/index.php?showtopic=29310
    Dynamic difficulty Bing Theme after using CCleaner

    Ramesh Srinivasan . The Winhelponline Blog
    Microsoft MVP, Windows desktop experience

  • Guarantee for the antennas and power injectors

    Anyone know what guarantees have antennas and power injectors? I need this information for AIR-ANT1728, AIR-PWRINJ3 = and AIR-PWRINJ4 =.

    Concerning

    Luis

    The antennas and the injectores are RELATED to the number of Pat.  If your WAP is no longer under warranty, while accessories are too.

  • Power over Ethernet for cDAQ 913 x (Windows)

    Hi all

    We believe using a cDAQ system to capture and process the images of a GigE camera alongside a few other data acquisition. The camera, we have in mind supports power over ethernet (PoE) we could eliminate the need for an additional power supply of the bulky.

    So, can I use this device with built-in second ethernet port of, say, a cDAQ-9136 (Windows)? I have searched the manual but have not yet found anything...

    Hello pktl2k,

    at the moment our controller do not support the PoE. You can use the Poe injector to power the camera

    Using Power over Ethernet with the hardware OR

  • Display driver for a p 8460

    Hello

    I don't think that I have the correct drive for my image to the 8460 p. Can someone direct me to the appropriate injector?

    Here is the hardware ID:

    PCI\VEN_1002 & DEV_6760 & SUBSYS_161E103C & REV_00

    PCI\VEN_1002 & DEV_6760 & SUBSYS_161E103C

    PCI\VEN_1002 & DEV_6760 & CC_030000

    PCI\VEN_1002 & DEV_6760 & CC_0300

    Hello:

    Download and install the graphics driver support for your PC and driver page AMD.

    It is the only driver, you must install the Intel and AMD cards graphics if your laptop is equipped with switchable.

    If it lacks these two cards, you must never install the Intel driver or allow HP or Windows Update to install updates for the Intel video card.

  • Try to install the 3DVIA player for a new game.

    I bought a game that requires a VirTool:MSIL/injector.BF drive, but Windows Vista says lack me a component to make it work. Can you help me? I installed 3DVIA.

    Hi jpearl52,

    1. What is the exact error message that you receive?

    2 - is the first time you install this software?

    Please provide us with more information about the issue to help you!

    Visit the link below and check if its helpful in installing the software on the computer.

    http://download.3DVIA.com/software/3DVIA-player/install/

    For additional support post your query in the 3DVIA forums.

    http://www.3DVIA.com/forums/

    See also: http://www.3DVIA.com/products/3DVIA-player/troubleshooting/  

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Can I use a 6343 OR USB as an entry grounded to trigger an injector?

    Hello forum members

    I'd like to be able to fire a solenoid valve high speed (low impedance about 1.6 ohm) with a peak and hold the pilot injector (from AEM).  The output of the P & H driver is activated when the trigger on input is connected to the Earth.  Can I use the 6343 to provide this ground trigger?  I read somewhere in the manual that I might be able to use a PFI or DIO line as output a 0 at the wheel.  Is that what I'm looking for?

    Thanks in advance,

    -Mike

    Mike,

    On the second page of the document, he says: trigger impedance: 220 ohms, shot at 12 V input impedance ("draw" 60 my).

    IF YOU CONNECT THIS TO A LINE OF DIO, YOU MAY DAMAGE THE USB-6343!

    What you want is a driver as the series of ULN200x of ICs.  They can handle the 12 V and 60 my. Pour reversed are available as well as high logic of the DIO line will be on the ground in the entrance to the injector driver.

    Lynn

  • Addition of Logitec X 540 for Acer Z3731 speaker system?

    Recently, I moved my all-in-one to a better location of the room and exchanged external speakers previously installed on an old desktop Acer running Vista.  In the process, I lost control of his driver and were unable to reinsall and reconfigure correctly.  The problem seems to be the characteristics of the internal speaker system and the driver stack which detects "characteristics.  I can't get the hardware to install and control the speakers sound Logitec 5.1 surround plugged into the rear panel as a system of "surround sound."  I can't keep the pilots to recognize initially built in audio which is only capable of stereo output high definition.  As a result, the external speakers that provide side Centre and wofer via a supplied matrix decoder control unit end stereo playback.  They worked fine with my old AcrePower-FH desktop running Vista.

    Any suggestions on how to proceed under Windows 7 (64 bit)?

    I ended up buying a subscription program manager drivers that provides recommendations for driver updates and uses heuristics to adopt its recommendations.  Do not trust it to Acer Aspire Z3731.  He recommended an incorrect driver for video on my computer.  It isn't that I had installed and started having major problems with MSIE 10 on the homepage of Comcast that I returned and found the driver for the Intel video chipset that is actually installed.  When I updated to this driver the next Microsoft Update I ran came with an optional update for Win64 with finally corrected graphic problems, but...

    It doesn't seem to be a way to get Windows 64 to install and display two other speakers or automatically override the defaults that the RealTech Acer driver is recommended for my box seems to be 'frozen' in.  The appearance of the user interface on the Realtech Audio Manager software installed, it is supposed to be able to detect the existence of more than one pair of speakers and adjust the injector appropriate as a default value.  Unfortunately, when I plug the X 540 he does not spend them and instead to show three son plugged into the rear panel, it shows four. I think that the fourth wire represents the internal speaker attached to the bus, which is a virtual place inside the computer.  What I have to open the case and disconnect the front speaker bar for this problem?  If if it sucks since Acer had rejected me requests to provide a case diagram or disassembly of instructions that would help me make sure that I'm not going to break anything trying to open the case.

    Someone answer please?  Apparently Acer Genius never faced this problem when they set up the software.  The package provided with this computer has now received 228 updates from Microsoft since I turned it on.  The 64-bit Microsoft Internet Explorer 9 instance that comes with it was so buggy that I ended up using Firefox to register with Microsoft so I can get automatic updates!  I'm really a fan of Acer, I own three of their computers, but this problem seems to be specific Acer.  I had the 540's X on an old Vista based desktop Acerpower FH and the driver bundled with it recognized them very well, but there was no internal speaker system.

    Finally! a partial solution to my symptoms... With the X of Logitec 540's hip, 'Matrix' button put out SERVICE and its 7.1 surround selected, I was able to get both the two "outside" speakers to operate under the name "back" involved so that the two exploited inside speakers as left and right and Center and the woofer to play simultaneously.  I had to have the driver set as "disabled" when I plugged the three sons of the 540 X and use the wizard to "solve the problems of sound" to get recognized records.  A good part of my funbling came about from can't understand what 'Matrix' on the X 540 controls mean.  It is intended to sound source that is only made in stereo, for example an MP3 player created by scanning of a stereo recording of the 1960s.  In my tests, I've often had this option and he effectively lost all but the left and right speakers in the X 540 system.

    I'm still not able to easily switch my Windows 7 X 64 system to use the system of external speakers with the sound bar and back via the software.  I think that this feature is / should be available for all-in-one devices.  No explanation?

  • Need driver for M6-n113dx network

    Hey all,.

    Tried all 7 drivers listed for the m6-n113dx. Nothing has worked. If someone could post a link to the appropriate injector, that it would be appreciated.

    Thank you very much.

    You are the very welcome.

  • OfficeJet Pro 8600 Software for iMac install Question

    I have a new iMac 27 "10.8.2 OSX operating system software. I just bought OfficeJet Pro 8600 N911g and the software supplied with the 8600 install no sound for OSX 10.7. He had 2 choices on the HP website to download and install. I chose officeJet-Pro - 8600_v12.23.0 on the OfficeJet-Pro - 8600_v12.14.0. Someone can tell me if I had the appropriate injector or is there a choice somewhere. It seems to me that the software is missing things especially in the optical reading area.

    This one is the right one: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107214-1&cc=us&dlc=en&lc=en&os=219&product=4323652&sw_lang=

  • Suddenly can't send/receive email through Windows Live Mail (see the below error code). I tried to use gotoassist.me for the online help, but could not connect as if something is blocking that, too.

    Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

    Subject 'test '.
    Server: 'smtp.gmail.com. '
    Windows Live Mail error ID: 0x800CCC0F
    Protocol: SMTP
    Port: 465
    Secure (SSL): Yes

    You may have the wrong SMTP port.  Check the appropriate injector.

    You may also have another step which is not described anywhere I could find:

Maybe you are looking for