Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

Here is what I tried:

I had hoped he would ask me for a new name / password, but it did not.

Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

I pressed the wireless button that has the flashing blue light and nothing happened.

I pressed the button, don't know what it is, but it has a white light, and nothing happened.

I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

Y at - it everywhere where I have being a novice could get instructions on how to get this working?

I appreciate any help you can give me.  Thank you.

Hello

I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

Kind regards.

Tags: HP Printers

Similar Questions

  • I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

    Turn off the new modem for at least 30 minutes. More is better.

    Perform a hard reset on the AirPort Extreme, then it turned off.

    Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

    After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

    Then, turn on the airport and let it run a few minutes

    Set up AirPort Extreme again

    Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

  • recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

    recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

    Hi mikedav,

    Thank you for using the Microsoft Windows Vista Forums.

    Method 1:

    Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

    Method 1:

    Follow the instructions in the link below which will help you solve the problem.

    Tips for solving problems with Internet Explorer

    http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

    Method 2:

    Follow the instructions in the link below to optimize Internet Explorer.

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

  • WiFi password has changed now my WiFi Repeater does not connect

    to change my WiFi password now my WiFi Repeater does not connect, anyone got an answer for me.

    to change my WiFi password now my WiFi Repeater does not connect, anyone got an answer for me.

    Connect to your WiFi Repeater and set the password to match the password for the router.

  • get the status of 4500 printer wireless hp envy line after changing the wireless router.

    I use 8.1 window and I want to HP 4500-e printer all in one and all a works very well. My wireless router was going bad, so I replaced it. After the installation of the new router and get all my computers and devices (including the hp 4500 wireless printer) connected to the new network, I tried to print. The printer is waiting to print which was sent to her, but its status is set to offline mode. The box in the sign that says "set printer to run in offline mode" is not checked. but the status says HP ENVY 4500 SERIES (NETWORK) - in offline mode.  Anyone else has this problem and do you know how to solve this problem. I tried to turn off the computer and the printer and restarting their and running a hp Diagnostics program, but he says that everything works fine.

    Replacement of your wireless router try now.

    http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  • Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

    Original title: Family Tree Maker does not connect on the Web dashboard.

    My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

    "Auntentication with the server failed.

    Hi HelenTL,

    You did changes to the computer before this problem?

    If you have any software security & firewall installed, disable them temporarily and check if the problem persists.


    Note:
    check to allow them back on the computer after you complete these steps.

    Hope the helps of information.
    Please post back and we do know.

  • HP Deskjet Ink Advantage 3525 does not connect to the server

    Hi guys, I am exhausted after a week of trying to solve the problem. I am printing and scanning over wifi without problem, but there is no way to activate the print server (ePrint). The printer screen (and also Web page) explains this printer could not connect to the internet. I tried to reinstall, open ports on the router (WRT54GL) and millions of other web solutions. I don't have a proxy on my home network. Someone has solved this problem, please?

    Hello

    Try to set a manual DNS and check if that can help you.

    Just follow the same steps as shown below from the HP Deskjet Ink Advantage 3525 software:

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-6520-scan-to-email-connection-problem/m-p/2549789/highlight/true#M58522

    Shlomi

  • After changing the administrator password in windows server 2003, I can not connect the next day why?

    After changing the password in windows server 2003, when the new password take effect?

    Hello

    In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Hope the information is useful.

  • Changing the settings to default print with CUPS still does not work, regardless of the application

    Hello, I looked through a number of positions on the definition of default printer in a Mac, but nothing solve my specific problem. I recently spent a PC to a MacBook Pro, just updated to Mountain Lion and installed my printer wireless, HP Deskjet F4500 Series, with the pilot chosen by my computer. The printer-computer connection usually works, but when I go into the CUPS and change the default settings for Fast Draft, n/b only, it does not apply when I print. I tried several times, making sure to save my default settings in CUPS (and indeed they appear here as Fast project, b & w only), but no matter which application print from - Safari, Chrome, text edit, etc.. - it prints in color and normal mode unless I manually selects the settings for that particular print job. This is especially a problem when printing things that are not pop up a print dialog, such as online coupons. I could easily change the settings of the default printer on my laptop and they apply to coupon print as well, but I'm having no luck with the Mac. Help, please! Thank you!

    Finally I got it solved!

    There are two options in Mountain Lion when you add the printer HP CM1415fn (Apple-> preferences-> Print & Scan system): "AirPrint" and "HP LaserJet CM1410 Series.

    So, with "AirPrint" set default CUPS Options has no effect, even if you change. PPD file.

    Fortunately, with the 'HP LaserJet CM1410 series' setting CUPS the default Options works well!

  • Why "change the temporary database file... maxsize unlimited" does not work?

    Hello

    Company Oracle 11 GR 2, windows server 2008 64 bit.
    --
    After run 'alter database tempfile' D:\ORACLE\ORADATA\MH\TEMP01. DBF 'autoextend on maxsize unlimited'; I found that the maxsize parameter is still 32G, why? is this a limitation of the operating system?

    How can I make the bigger than the temporary file? to add another temporary file? How to write this command "Edit" to add another file?

    Thank you very much!

    After run 'alter database tempfile' D:\ORACLE\ORADATA\MH\TEMP01. DBF 'autoextend on maxsize unlimited'; I found that the maxsize parameter is still 32G, why? is this a limitation of the operating system?

    There are some limitations on the maximum size of data file depending on the block size and version you are using.

    I suggest you to go through the document of MOS

    * What is the Maximum Datafile size limit in an Oracle database? [ID 804733.1] *.

    How can I make the bigger than the temporary file? to add another temporary file? How to write this command "Edit" to add another file?

    Well, you can add another temporary file to the existing temporary tablespace. Not a problem. You can go for Bigfile tablespace also.

  • Since the update to the current version (6.0.2?), firefox does not connect, but won't that until the ' topic: House "or opens a website. What is missing?

    All firefox windows only opened a "subject: home ' tab, and when I type a URL by hand, I get only a homepage Mozilla Firefox, nothing else. I tried to disable Avast, still no good. Chrome, IE both work very well.

    You are welcome.

    It is generally easier to remove all existing permissions for Firefox.

    Then the firewall you'll be asked again the next time you start Firefox.

  • Downloaded the latest updates now Internet Explorer 9 does not connect to the internet that windows mail will be

    Updates include;

    Update security for Windows Vista (KB2823324),
    Update of definition for the 32-bit edition of Microsoft Office 2010 (KB982726),

    Update security for Windows Vista (KB2813170)
    Update of security for Microsoft InfoPath 2010 (KB2760406) 32 - Bit Edition
    A security update cumulative for Internet Explorer 9 for Windows Vista (KB2817183)
    Windows Malicious Software Removal Tool - April 2013 (KB890830)
    Update security for Windows Vista (KB2813345)

    You can solve your problems of connection of IE9?
    Not sure, but the wrong update of KB2823324 could be the culprit.
    Please note that the MS MS13-036 Security Bulletin released on 9 April 2013 was re-released (revision V3.0) on April 23, 2013, to replace the defective KB2823324 update with a new update KB2840149 to NTFS.sys when it is installed on editions supported for Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2.

    According to V3.0 of revision of recommendations MS13-036 Update FAQ & MS:

    -Update of safety KB2823324 expired on April 11, 2013.
    -April 11, 2013, Microsoft has provided advice (see: KB2839011 - Update April 24, 2013) that all customers should uninstall the update of security KB2823324 (even if you were / are not experience difficulties) and exceeded the associated packages. Other references may include: KB2839011 released to address security Bulletin update problem (published by the MSRCTeam on April 11, 2013).
    -All customers need to apply the new KB2840149 update (to be protected from the CVE-2013-1293), released on April 23, 2013 update that replaces the expired KB2823324.
    -Microsoft strongly recommends that customers with the update of KB2823324 still installed, must uninstall the update has expired "prior" to the application of the new update of KB2840149. Please note that customers who do not remove the update expired will keep a list for KB2823324 under updates installed in the Panel.

    I hope this helps.

  • Accidentally, I bought the version Windows of Creative Suite 6. Then I tried to download the Mac version, but now my serial number does not work. What can I do to fix this?

    Help please?

    Please check: a product for another language or version of trading platform

  • iPad does not connect to the Wifi on the range 192.168.0. *.

    I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

    I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

    After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

    My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

    Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

    Is there a future fix for this?

    Re: iPad wifi suddenly does not save

    Change the range on the router you want to connect to.

  • My desktop under Vista Home Premium does not connect to the internet.

    I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
    Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

    Are you sure you never had a Norton trial subscription on your computer?

    Norton will do strange things.

    http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

    Try to use the Norton removal tool.

    The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • How to edit photos?

    I just upgraded to El Capitan, and can't see how to edit photos. I assumed it would be via the "Photos" application Any suggestions?

  • Can I use the new remote and SIRI to select HomeVideo movies on my iMac

    I have more than 1,000 movies from my personal library on the hard drive of my iMac. In the past, the only way to select one was to scroll, scroll and scroll up to what I got. I was told I could use SIRI to ask for the film. When I tried, it chose th

  • File extension

    I just downloaded music videos that have a 3gp file position. Anyone know what it is? Is there anything available that will allow these files to be converted to MP3 or any other file such as mpeg ext? I have an audio converter and audio editor and ne

  • I can use my laptop with internet connection by cable, but cannot configure the wireless connection.

    Wireless Internet can use my laptop with internet cable is plugged in, but I am unable to set up a Wi - Fi connection, even though two other laptops in the House are Wi - Fi. Tried the convenience store who said there is a button on the front of the

  • How to bring back the toolbar is a normal size? It is twice as wide as it should.

    The taskbar is unlocked and moved around the screen.  Somehow at the same time, it became twice the width of whatIt has been.  But I have the toolbar at the bottom of the screen with another person with the same problem... now I need to getShe has a