Ink installed but the light still flashes

Similar Questions

• Satellite P10 554 turns off, can't start again, but the lights still burning

  My P10 554 stops after a few minutes. After that, I can't restart, but led lights are always on fire. When I'm waiting for a few minutes or a few hours, then I can restart my laptop once again, but it spans about one or two minutes and then stops himself again...

  I thought about a problem with the fan or something like that, but why the led still is on fire after stopping? What can I do?

  If the AC adapter is plugged in to the computer some LEDS are usually on. For example the battery LED lights up green when it s fully charged.
  However, it s not usual that the laptop stops after several minutes of race and for me it certainly looks like a hardware failure.

  The problem is just a common user like me and you is not usually able to fix or to locate the fault. You certainly need a help of a technician with a lot more experience.
  The guys from the ASP can run diagnostic tests and are able to find out what's wrong on the Board.

• printer-i just change the ink cartridge, but the light is always hide

  I just changed the ink in my printer cartridge, the light which shows needs to be changed is still. Can someone help me, please?

  Contact the manufacturer of your printer.  It is a hardware problem that neither Microsoft nor Windows caused or can solve.

• Printer has a block of paper that has been authorized, but the light keeps flashing and I can't print

  I feel, then the printer has got a pad of paper, I pulled out the paper, but the printer does not print more. I don't know what happened.

  Hello

  • What happens when you try to print now?
  • You receive an error message when printing?
  • What version of Windows are you using?
  • What is the brand and model of the printer?
  You can check these links:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Try also to turn on and off the printer and check.

• I replaced the ink cartridges, but the printer still shows empty black cartridge. How can I reset?

  I have a HP Deskjet 3050 a - J611j all-in-one printer.  I use Mac OS 10.7 Lion.   I replaced the empty ink cartridges.  Now it shows the color cartridge is full, but still shows black cartridge empty.  Is it possible to reset it?

  Hi Shanmarie1103,

  If the cartridges are rebuilt you will not get a read out on the ink levels. You will need to use a new OEM cartridge with a new chip for the ink levels. Click on the links below for more information.

  The truth about remanufactured ink and toner cartridges

  Price of ink

  

• My oki b2200 printer does not work, but the lights are flashing i dnt know what to do

  I already delet and printer announcement once again.   and I see 2 green lights and 2 flashing umber yet blinking.its only a month old printer.

  Hello

  Because it's only a month, it should be under warranty.

  Contact the manufacturer of the printer for their support.

  See you soon.

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• Envy 15 k005tx: laptop will not close properly... the va just black screen but the light is on and the fan also

  Laptop doesn't go out normally... va just black screen but the light is on and the fan is also on... so I have to stop it by pressing the power button... help plz...

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  Try to use the following method to see if you can install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• HP keyboard model kg-0851, I tried all the steps from hp, but the keyboard still does not

  I tried all the steps from hp, but the keyboard still does not.  When I look at the Device Manager, it says that it is fine.

  Hello

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• I got XI of Acrobat Pro installed but the computer has not broken. I want to register this product so that it can be installed on my PC replacement. How to do this please?

  Acrobat Pro XI installed, but the computer has not broke. I want to register this product so that it can be installed on my PC replacement. How to do this please?

  registration is not necessary to install on a pc replacement.

  Just use your serial number and your installation files to install xi acrobat on your new computer.  If you see an error account is activated and you cannot disable the acrobat on your broken computer, use a browser that allows cookies and popups, contact support to adobe for hourly pst by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request a number of activations reset.

• Adobe Creative Cloud said 2015 Lightroom, I installed, but the installation failed. How to restart the installation?

  Creating cloud said 2015 Lightroom, I installed, but the installation was not successful. How do I install reinitiatite?

  If you have a full membership of creative Cloud or a plan of photography, you should be able to download and install Lightroom CC 2015 on the site of creative cloud. Since Lightroom CC is a new product, it will not show as an update in Adobe Application Manager. Instead, press the button install next to Lightroom in the Application Manager.

  IF you do not already have it, you can download here creative cloud office:
  Using creative cloud | Creative cloud to desktop

  Then, install Lightroom.  For information on downloading and installing applications, see this link:
  Using creative cloud | Download, install, update or uninstall applications

  If you do not see 'install' by Lightroom in the application manager, please first try to log out and return to: connect and disconnect from the creative cloud desktop application

  If you still have questions, see option 2 in this link:
  Lightroom does not launch or closes automatically after the splash screen

  Kind regards

  Guinot

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.