Ink is full, but the print quality is not good with HP Officejet 7000

Similar Questions

• "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

  I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

  Original title:

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Excerpt:
  Can I run a 32-bit program on a 64-bit computer?

  Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• DeskJet 1010: Black cartridge is full; but the prints either light gray or not at all.

  The black cartridge is full; but do not print.  When I do a test page with HP print and Scan doctor, black prints grey.  When I try to print using my desktop burner, it prints nothing.  Prints a blank page.  I had this same problem of six months; but was able to talk to technical support services because the printer was still under warranty.  They have solved the problem without delay.  The warranty expired 4/2015, so I'm unable to speak to a representative of Tech and unfortunately, I don't remember what the rep done to solve the problem.  Can anyone help?

  Thanks for the quick response.  I followed all of your suggestions and unfortunately I had to replace the black cartridge.  Nothing else has worked.  Does not explain why for the old cartridge ink levels showed as complete but does not print.  Hope this doesn't continue to happen with HP 61 cartridge.  Thanks again.  I appreciate your help.

• DeskJet 3420: deskjet 3420 other driver installed, but the printer is still not printing

  Hello everyone, I followed the instructions under the "alternative install print driver for Win 7 for USB. Once the Windows Update over the 3600 was not present, but the 9800 has been (I've read is also a generic driver). I can see the printer in my list of printers (I only have 1) and the driver says he's the 9800. I changed the port of LT1 to USB001.  When I ask it to print a test page, it is listed in the print jobs & then disappears as if he thinks that the work has been done. I tried each of the USB ports & they are all the same. The printer has a green check mark next to it and says it's working properly. I don't know if I have an application of 32 or 64-bit. What did I miss?

  Then I thought about it and the instructions on this site are not correct, at least for my set up. The windows update took more than 8 hours for me, so be patient and then the deskjet 3600 printer was not the first time. Two windows updates, 3600 driver has been identified. Hooray! Then, I chose USB001 from printer port. Then he said to go to, click on computer management rt, but printers are managed not there at all. I went in the devices & Printers and found my printer then rt click on, and then select printer properties. Under the Advanced tab click new driver, and the list of windows drivers update came. I followed the Installation Wizard of printer and after I clicked Finish, I could go back and print the test page. Eureka. I spent hours on this and I hope this can help someone else.

  See you soon

• I can't open Firefox, but Safari opens fine. Tried to download Firefox, but the new version is not compatible with the iMAC G5

  I use Firefox for several years on my G5 iMAC, running MAC OS 10.5.8. This morning, Firefox does not open. Tried to open it from the icon in the Applications folder, but does not always. Safari opens without difficulty. Tried to download Firefox again, thinking a file might have been corrupted, but new version is not compatible with my hardware of desktop computers. I find a compatible version of Firefox? My NAV for MAC security software is not interfering.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html

• I didn't like Acrobat Reader DC, too heavy, so I removed and installed AReader 11.  But the print quality is terrible, not as it used to be.  I can hardly read.  How can I solve this problem.

  I use PC, Windows 10.  My previous version of player worked great.

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the full Setup offline reader for the version you want from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Hello, I just reinstalled Firefox 8.0 and imported my backup bookmarks.html file, but the bookmarks toolbar has not changed with my old favorites. Is this a problem or I have to manually add each bookmark again?

  don't know what details to tell you, that all important data are written in the question. Thank you.

  You have now two folders of Bookmarks Toolbar. One of the installation of Firefox (the main one) and a 2nd file to import a bookmarks.html file.

  Find the Bookmarks Toolbar folder that is under the bookmarks Menu folder and copy or drag ' drop these bookmarks in the Bookmarks Toolbar folder that is above the bookmarks Menu folder.

• I can see the printer in the application (Photosmart C7280) but the "print" key seems to be gray

  I use the HP homeandbiz app on my iPad, the app recognizes my HP 7200 printer and seems to let me select it, but the "print" key does not work. There is a small circle, red next to the printer in the application - this important?

  Hi DaveTlp,

  It seems that the printer has been associated previously but is not currently available. Make sure that the printer is turned on, your ink levels are ok and make sure that both devices are on the same wireless network. If the problem persists, I would like to power cycle both devices and see if that helps.

• Audio Fadin incoming and outgoing, but the video quality remains high.

  Hello. I am regularly skyping someone, but the incoming audio signal began fade in and out and sometimes mute altogether. The video quality is very good and she can still hear and see me OK. The volume for Skype and everything else is wound up to the maximum. I tried skyping someone else and the problem was not present.

  I do not understand how the audio quality that I can fade, but the video quality does not change. I would have thought if they had problems of band bandwidth then the video would have refused and the Lady, I'm not talking would receive me in this good quality either.

  Is anyone know something about this problem and a possible solution?

  Thank you

  Hello. In the case where someone comes across it because they have the same or similar problem I found the solution. It turns out, somehow, that the volume of my microphone had been wound up to the maximum. Because Skype reduces the audio signal entering when you make noise, the person I was calling I couldn't hear because I was broadcasting involuntarily every tiny noise. This interrupts my incoming audio. For some reason I have the microphone picks up a ridiculous level of background noise. Only, I discovered this after a test of back to back with my mother's laptop. To stop the problem I just wrapped up my microphone volume down in audio on Skype settings until there no sign up tapping or other noises. So I send you not now sounds that would hurt my incoming audio. It also explains how the Lady I was calling could still hear me fine and the quality of the video never abandoned, but the audio signal coming at my end was.

• The printer door does not shut down after printing

  HP Envy110 model D411c.    I printed out a page, the door opened, the extension arm is released, but was partially blocked. The printed page in the status bar and was recovered, the extension arm retracted, but the printer door has not closed completely.  I printed the pages since then, everything works well except for the door.  It closed partially and stops.  No warning appears on the screen.  I have to close to allow the doors close. Help!

  OK, I have a solution thanks to the autonomy and the helpline UK. At least, it works for my desire 120th All In One.

  The door / cover will always return to the position where the task was started. I don't remember to start work with the Panel in the raised position, but apparently I did.

  Solution: With the printer, gently push the door closed. Now print or copy. As the work that started with the door closed, he will return to this position even when the work is completed.

  Why oh why is anybody's guess. Good luck!

• Canon Pixma MG5320 printer does not print. Ink tanks are full, but the pages are blank. Help, please.

  I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.

  Hi marsha3236,

  To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern.  If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink.  To print the nozzle check pattern and make cleaning, please follow the steps located here.

  If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.

• HP 2050 j510 series change the print quality options all greyed out help? Project custom quality etc.

  Hi I just installed this printer on an operating system of Windows 7 32 bit, but on the quality of implementation page/impression of two tabs only page layout can be changed all options are greyed out it is deliberate to stop printing in draft print quality or quality options above that this has no sense here that I hadn't bought this printer now as she gobbles up ink and I can't change the print quality at first, I was disappointed that now I would never never buy another printer HP unless HP or someone can help you. Printer is brand new, right out of the box, but HP only support expensive paid as it has been manufactured since more than a year! How bad are only only he registered today for the first time!  Thumbs down for HP!

  Hi charlieelston,

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print using this driver for the Deskjet 3050 printer. I would like to know if you have the same problem?

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• I nearly filled my HP F4580 printer cartridges, but the printer thinks they are empty.

  I nearly filled my HP F4580 printer cartridges, but the printer think they are empty, so I can't print.

  If I reinstall the cartridges, I change the printer says the ink level, but this went after printing 1 page. Y at - it a simple sollution for this problem?

  @ Ton101 - I would like to clean the contacts on the cartridges and the printer to make sure the accumulation was not the cause of the problem you are having with the printer. Follow these steps to clean the electrical contacts on the cartridges and inside the product.

• I cleaned the print heads, but the printed letters are still coming from pale grey.

  I have a HP Photosmart eStation all in one printer-C510a.  When I print the works are very pale.  I changed the ink cartrideges and cleaned the print heads.  Still very pale.  Any ideas what to do next?

  Hi rab27,.

  Thank you for visiting the Forums from the HP Support! I understand that when you are printing on your HP Photosmart eStation C510, the output is very pale, you attempted to clean the print heads and replace cartridges without success. In order to better assist you, what is the current operating system you use, Windows or Mac and what version?

  I assure you, you are able to make a copy. Can make you a black copy with no problems?

  Now we will make sure that you do not have the printer to print in black and white only. Please follow the steps listed below:

  1. go to your Start Menu

  2. Select devices and printers

  3. right click on your C510 and access print options

  4. click on the advanced option

  5. in the section of the characteristics of the printer, make sure that it is not set to print in grayscale

  Now, let's go and run HP print and Scan Doctor- designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you have changed the printing preferences, ran the PSDR HP without success, please continue here: Troubleshooting print quality problems

  I hope this helps, let me know the result.

  Thank you