ink system failure officejet 6500

make system failure ink on officejet 6500, changed the cartridges, activated and deactivated

I am writing to everyone affected by a FAILURE of the SYSTEM of INK message.  I use a 6500 and my wife has a wide 7500 a carrige. The 7500 had an ink system failure. I tried everthing recommended with no luck.  My wife needs a printer to work more than I do, I went to get out them.  Given that the power supplies are the same I have left in place.  Guess what?  The 6500 came with an ink SYSTEM FAILURE as soon as it was powered by the power of 7500.  I changed the power supply and everything works fine.  I tested the 7500 on feeding of 6500 and no ink system failure more.   I have not measured the voltage on the power supply that seems to cause the ink system failure, but I recommend you try a new power supply before you buy a new print head.  Check ebay and amazon for a nice price.

Hope this helps someone else.

Tags: HP Printers

Similar Questions

  • Ink system failure Officejet 6500 (no error code specified)

    Ink system failure Officejet 6500 (no error code specified)

    I have turned off the machine on again (and it doesn't)

    I turned off the computer and unplug the unit (and it does not fix it)

    Without specific error code I'm not sure what to do

    Hi CHCA. Your Officejet 6500 must be out of warranty? You can doublecheck the warranty status of your printer here: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=ie & lc = on -if it is still under warranty, you should not pay for a new printheaad.

    But if your printer is no longer under warranty, you buy one a. The part that you really need to order an Officejet 6500, is CN643A. If you are in the United States, here are the HP part store page where you can order the new print head Assembly: http://h20141.www2.hp.com/HPPARTS/Search_Results.aspx?mscssid=C580393F30964EDD82B16A5C641BEC41 & Searchin' PartNumber = & SearchPN = CN643A

    If you are not in the United States, start from this page: http://welcome.hp.com/country/us/en/wwhowtobuy.html , specify your country and search for CN643A.

    Also, here is a support document that should help you with the replacement of the print head: http://support.hp.com/us-en/document/c01643079

    I work with HP but my messages and responses are mine.

  • HP Officejet 6500 E709n: HP Officejet 6500 E709n - ink system failure error message.

    I have a printer HP Officejet 6500 E709n.  I get the following error message when I turn on the printer:

    'Ink system failure.  "Please turn printer off, then on.

    I then do as instructed and turn the printer off, but then the whenever I re - turn on the printer, I get the same error again.  The printer is now fixed to the top and none of the buttons on the printer works except the Power button on / off.

    Any suggestions on how to proceed?

    Hi @recooke,

    Welcome to the Forums of HP Support! I see that you can not use your HP Officejet 6500 Wireless. You get a printer fault to "turn printer off and then on again" you did without success.

    Please perform a hard reset:

    1. disconnect all cables and cards of memory in the printer.  Unplug the power cord, directly from the back of the printer when the printer is still on.

    2. unplug the other end of the power cord.

    3. If there is a power supply on the power cord, disconnect one end and reconnect it.
        
    4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup).
        
    5. connect the power cord to the back of the printer.
        
    6. the printer should automatically power back upward.  If not, turn it on with the power button.

    7. try to make a photocopy (if your printer is an all-in one) before you connect the cables from the printer.

    8. connect the other cables needed to the printer.

    It is recommended that the printer is plugged directly into a wall socket to ensure a uniform level of power.  Sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

    Any change?

    If you still see the error, please check your Inbox. I sent you a private message on the Forums.

    Response with the result. I hope this helps.

    Just say thank you, please click the ' Thumbs Up ' button.

  • Print head and Officejet 6500 ink system failure problems

    I have the Officejet 6500 wireless and it won't print.  It says ink system failure and head print seems to be missing or damaged.  Today, I installed new HP ink cartridges.

    Is it possible to check to see whether this printer is kaput?

    There is a document with steps to help treat herelocated ink system failure messages.

    So, for the question on the print head see the document here.

    I hope this helps.

  • Ink system failure error Code 0xc19a0013 HP Officejet 6500 has

    Printer has stopped printing in black ink: get a gray tone or no impression.  Get higher up the ink system failure error.

    Reviewed the help pages and have installed new black ink cartridge, check the squares of all the cartridges, clean the print head menu Tools, removed the print head and cleaned manually, unplug the power supply etc. Considered the responses on the forum pages. A ran HP print and Scan doctor.  I consider when buying a new print head or a new printer, any other suggestions? It's only black ink.  I ran a test page and the black box of the ink is interesting: instead of going from the darkest to the lightest he's going from light to dark to light again.  Thank you, Sue S.-S.

    You're welcome Sue

    See post below on Bob soak the printhead...

    http://h30434.www3.HP.com/T5/other-printing-questions/Photosmart-premium-C309a-black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

    (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
    (2) remove all ink cartridges, then remove the print head Assembly.
    (3) gently put the printhead nozzles down in water and soak for 5 minutes.
    (4) remove the print head and gently dry the electrical contacts.
    (5) replace the print head in the printer and then reinstall the ink cartridges.

  • HP Office Jet 6500 E709a Series says ink system failure

    my HP Office Jet 6500 E709a Series says ink system failure. Turn the printer off of the ndo. does not resolve made 3 times. Have unplugged the device and removed and reinstalled ink cartridges. nothing works

    Original title: printer print

    Please take a look at

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&cc=us&lc=en&dlc=en&product=3795314&tmp_track_link=ot_search#N99 .

  • HP Officejet 6600 e-all-in-one printer - H711a/H711g 'Ink system failure', will not print computer

    At first, it was just a problem with do not print from the computer.  Error messages had to do with the failure of the print head or do not find print head, etc..  After going through several different controls online, download the scans, etc., it does not at all, print showing an error message "ink system failure".  I tried to remove and reinsert the 4 printheads (black 932, 933 colors) and turning market and check the caps and unplug the power.  Since this is a wireless network, I can't unplug the USB.  It was the OK signal.  Now, with this error message, I don't see the home screen printer controls.  It just says: put it on and then contact HP.  Help, please.  Very frustrated (it didn't happen all at once - a first he wouldn't print from the computer sometimes, other times.)

    Wildrat58,

    If you get ink system failure and you've been through the steps that are listed in the article above the printer may require troubleshooting. You can reach support - 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options.

    Good luck!

  • brand new officejet pro 8600 e - all - in - one, ink system failure msg, msg lack cartridge...

    told to turn off the printer after ink system failure msg, but then gives a cartridge can fail to msg and said that the printer can be damaged if turned off.

    The printer is brand new. I print a dozen test pages fine... haven't touched inks since installed first. When I open the cartridge access door, inks/heads move to the opening, so I can't reinstall the cartridges. Help!

    The document here can help.  You'll need temporarily ignore the message about not to turn off the printer...

  • OfficeJet 7500 has E910, "ink system failure".

    I have 2 Office jet 7500 a E910; I get 'ink system failure', the other works well; I take the printhead that is OK, I put it in the other: 'ink system failure '; I just got back from the other unit and no problem. I tried to unplug and reconect, same error. I tried to reset the printer, the same mistake; I cleaned with cleaning paper for lenses from contacts inside the print head holder, same error. What more is needed?

    Hey there!

    Thanks for getting back to me!

    I understand that the question much better now thank you for the clarification. So the problem is with the 1 printer, you take the printhead of the printer to work and put in the printer broke and he always says that there is a "ink system failure".

    These steps you have done certainly point to the printer in question. I highly recommend that you call Support technique Hp for help with this problem because they have more options for you I do. For a uniform 'ink system' on 1 unit you know has a printhead working in could be a clear sign of a fatal error.

    If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

    HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

    I hope this helps. Please let me know the results. Have a wonderful day!

  • The message on printer ink system failure

    Spoiler (Highlight to read)

     
     

    Have a message to get HP Office jet 6500 on printer ink system failure

    Anyone?  Thank you

    Peebles

    There is a document for ink system, for the Officejet 6500 failure, found here.

    Hope it will help Peebles.

  • My HP printer has an ink system failure, what can I do to fix this?

    Hello

    I'll do a tutorial on how to solve the error message ink system failure.

    Now, in general this error can occur when the ink cartridges are bad, the printhead is damaged or the sensors are indicating that the ink system has failed to the printer.

    Step 1:

    The first step we take with an ink system failure problem is a hard reset with the printer. A hard reset Resets the sensors inside the unit causing the sensors reading if the print head or ink cartridges are healthy or not.

    Hard Reset:

    Unplug the power cord from the printer and the wall

    Wait for 30 seconds

    Plug the power cord into the printer, and then on the wall (do not plug power cord into a surge protector)


    Step 2:

    Now, if the hard reset doesn't fix the problem there are a few available documents to follow which will guide you through a few steps to try to resolve the printer.

    I will list a couple of them here:

    If your printer does not appear please go to HP support and drivers and search for your printer and your document.

    Photosmart C7280

    OfficeJet Pro 8600

    OfficeJet 6500 Wireless

    Step 3:

    If none of these documents allows to solve the issue, I would call HP @8004746836. They should be able to help you replace or repair the unit. This could result in the replacement of the printhead, if so please be aware that if you are out of warranty, it will cost you.

    Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
    I really appreciate it!

    Thank you!

    I hope it's useful!

    Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
    I really appreciate it!

    Thank you!

  • 0xc19a0023 of Photosmart ink system failure

    I have a photosmart C6380 All - In - one printer which has an error message on that says "ink system failure, 0xc19a0023 please turn printer market."  Followed all directions under the heading contact hp as turning point on and outside, by unplugging all the cords, clean the electrical contacts, etc..  Bought in 3/09, so out of warranty.  Called Hp and has spent 37 minutes on the line with them, trying to sell me a new printer without ever discussing the problem with someone difficult to understand.  Was willing to pay $20 for 14 days tech support but kept making pressure to pay $37.for 1 year of technical support.    We know what means this code and how to fix it?  Have never had any other problems with the printer and still use the correct HP with her ink cartridges. Have windows Vista on my computer.  Thank you!

    Usually with a message like that, we recommend you first disconnected the USB cable if it is connected to a computer. Then remove the cartridges from the printer as well. With the always on power, unplug the power cord at the back of the printer, as well as the wall, and then wait for about 60 seconds. After that, plug it to the wall first, then the printer, allowing it to start.

    If it gives you a message similar to "the following ink cartridges appear to be missing or corrupt" you can reinstall them at this time, when you are prompted.

    (If you do not have a keyboard, then you won't be able to do the 2 steps. Please see below.)

    If you get the error message even if you have a numeric keypad on the printer, proceed in the same way, but before plugging it back in, press and hold the button # with the number 3 and plug the power cord into the printer and now the buttons. Once the printer starts to show he'll be back to the top, you can release the buttons and allow him to return to the top.

    If you continue to get the message, then do the same thing except hold # and number 6 on the keypad and it allow to return to the top.

    If you still get the message after all the steps above are performed, please contact HP for a replacement, if your printer is still under warranty. If the printer is out of warranty, then we have still generally upgrade options available, and you may be able to get a replacement printer (yet a different or better model) cheaper to go buy a new one. It is usually a good idea to call to see what your options may be at this time for this on phone support options. Beyond what I posted, it is not a lot of telephone support can do for you, so, in my opinion, I would try to focus on the upgrade options.

  • Printer ink system failure message all-in-one HP 6180

    I can't print because of the error message following on my all-in-one HP 6180 printer screen:

    Ink system failure. Refer to the documentation of the printer Oxc18a0201. I followed all the recommendations on documentation of the printer, such as: installation later HP updates, turn off the printer and remove the power cord, remove all the ink cartridges and then putting back in when prompted. Also, I rebooted my computer. None of these recommendations have worked. I need help! Thank you.

    Hello Kah524,

    I met your questions and we have a solution for this and you can try it, but that would apply only on starting with '0xC18A' and not '0xc19a error codes.

    Try the following steps for Photosmart C7280:

    A. - Press and hold the "*" key.

    B. - Press the "#" and release both buttons.

    Display should say "enter special key Combo".

    C. - Press and release in sequence the buttons '1', '2' and '3 '.

    Display should say "Support" and display the FW rev (something like R0631R)

    Press and release the right arrow button until the display shows "Menu of the System Configuration'.

    Press and release the OK"" button.

    Display should say "hardware failure status. If it isn't there already, arrow above for "Hardware failure status"

    Press and release the OK"" button.

    Display should say "hardware failure status: clear." Press OK to erase.

    Press and release the OK"" button. Message becomes "hardware failure (breakdowns) resolved state. Press Cancel to continue.

    Press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the 'ink system failure' is displayed. DON'T TRY TO PRINT AT THIS STAGE.

    Using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

    Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

    Switch on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

    If the printer has already initialized, then go to the next step. If this isn't the case, the printer will start the "ONE TIME INK initialization PROCESS". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

    To check, features of the printer print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use or installation of the software.

    If the error is still there, or reoccurs replace the unit.

    --------------------------------------------------​---

    0XC19a error messages, the printer can be retrieved.

    Good luck and if that fixes the problem please click on Bravo...

    ---------------------------------

    Although I am an employee of HP, I speak for me.

  • 0xc19a0020 ink system failure error message

    Hello

    I have a HP Photosmart Plus, product # CN216, model # B210a. I'm running Mac OS X 10.7.5

    Today, I turned on my printer and got the error message "ink system failure 0xc19a0020 please turn printer Off and then on.

    So I did, but still got the error. So, I did the troubleshooting, which told me how to clean the print head. I've done 3 times, but I still get the error. I unplugged the power cord from the printer, then the wall, waited, then reconnected. I still get the error.

    I use the printer at least once a week, so he hasn't been sitting unused for too long.  I have not changed anything or whatever installed lately. The ink cartridges have ink.

    Anything else I can try? The replacement print head is $72!

    Thank you!

    Sorry, but generally, this can be a bad head of printing or bad cartridges. Here is a link that will help you with this problem, even if you did most of these steps.

    http://support.HP.com/us-en/document/c03081973

    If you have already replaced the front print heads and you return to this same stage, it would be a bad printer and maintenance needs.

  • Photosmart C7280 All in One Printer, Error Message - ink system failure

    Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.

    The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?

    Thank you, Cynthia

    This might help you:

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

Maybe you are looking for

  • Any option of software CAD on MDD G4 with 10.4 Tiger?

    Wonder about older versions of CAD software available for 10.4 Tiger on a G4 MDD.  I'm interesting in creating a STL file for 3D printing.  I was wondering if I can do this on the MDD ol faithful ', or if I have to use a machine and the latest OS.

  • NTLM authentication is supported style UPN (userPrincipalname) username?

    Is authentication NTLM supports style UPN (userPrincipalname) username (ex: * e-mail address is removed from the privacy *) to authenticate?

  • erasure of data from the hard drive?

    Hey Microsoft, I have a problem I had two boot(win_xp_pro_and_win_7_ult).they are the two 32 bit. so I tried exchanging win xp with win vista ult 32 bit (download, NOT on the cd). I started to install and after 4 5 steps made my pc restarted and it s

  • Z10 blackBerry which is locked sim card average

    Hello, I recently bought a blackberry Z10 and was always warned by the led light flashes when the battery is low.  now all of a sudden when it gets to about 20% of the battery I am busy on the phone, it will say STOP DEVICE and I havve hurt him get. 

  • English which is the version that works with all versions of Windows 7

    Who is the English version of IE10 that works with all versions of Windows 7? I ve been in the page Download Center to download IE 10 English I Spanish W7 Home Premium 64 bit, and I would like to than IE 10 in English. I uninstalled IE on my computer