[INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

Hi all

12 c

Win7 64 bit

I install 12 c, but I encountered error:

Capture.JPG

[INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

Cause - failed to access the temporary location.


Action - make sure that the current user has required permissions to the temporary location.

Additional information:

Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".


What temp file should grant permissions to?

Thank you very much

JC

Hello

Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

Line underscore or annoying characters on your node name cause problem. What is the name of node? Please change it will solve the problem.

Current version 12101 is to have this constraint. See MOS: 1957895.1

-Pavan Kumar N

Tags: Database

Similar Questions

  • INS-06003: failure of connectivity SSH without password for installation with the following

    Dear all,

    I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
    I have installed ssh on both RAC nodes and when I run

    SSH - p7547 racnode1 "date; hostname ".
    SSH - p7547 racnode2 "date; hostname ".

    I get the date and the hostname without error on both nodes.

    But during the installation of the grid, I get this error message:

    INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

    My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

    I also get this information in the Setup log:

    WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

    Kindly help on that.

    Kind regards
    Imran

    misterimran wrote:
    Dear all,

    I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
    I have installed ssh on both RAC nodes and when I run

    SSH - p7547 racnode1 "date; hostname ".
    SSH - p7547 racnode2 "date; hostname ".

    I get the date and the hostname without error on both nodes.

    But during the installation of the grid, I get this error message:

    INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

    My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

    I also get this information in the Setup log:

    WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

    Kindly help on that.

    Kind regards
    Imran

    You can have the file/etc/ssh/ssh_config, where the default port is set at 22. Replace with 7547 and try ssh racnode1 "date; hostname". If it works, then it contains the definition, you may need to perform.

    Kind regards
    Julien

  • Adobe Application Manager, necessary for the verification of your driver's license, is missing or damaged.

    Adobe Application Manager, necessary for the verification of your driver's license, is missing or damaged. It appears each time I open a program from adobe. I downloaded the Manager, but he did that update hasdobe asks Manager.Please if you have an answer answer to me.

    N ° 1)

    Launch the Task Manager, click on the more details and end Adobe all related tasks.

    Step 2)

    Go to C: > Program (x 86) > " common files" > Adobe.

    Open the Adobe folder and delete files named Adobe Application Manager and OOBE.                  [Important]

    Impossible to remove? try to rename. as old OOBE. and Adobe Application Manager old.

    Step 3)

    Click on the link below and download Adobe Application manager and install the same:

    http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

    Once the installation is complete, look for the icon of Adobe Application Manager launch on desktop and double-click it.

    It will start the update process.

    Once the update is complete, launch applications CC and check.

  • going on a computer: how to cancel the password which is necessary for the opening of the computer

    How to cancel the password which is necessary for the opening of the computer

    Do you mean that a password is required immediately after you turn on the computer or when you arrive at the Welcome to Windows screen? If the first case, it is a BIOS password and how you disable it depends on what type of computer you have. If the latter:

    Set up Windows to automatically connect (MVP Ramesh) -http://windowsxp.mvps.org/Autologon.htm

    If you would like more information or is not what you mean, please explain your post.

    MS - MVP - Elephant Boy computers - don't panic!

  • Warning__program error__one or more files necessary for the operation of the memorex expressit label design studio are missing or corrupt. Please use the Setup program to reinstall the software.

    Tried to update to Safari that does not work after the update. Then my printer stop working. Get the following message: 'WARNING '.
    program error
    necessary for the operation of the studio of design of memorex expressit label one or several files are missing or corrupt. Please use the Setup program to reinstall the software. »
    Already uninstalled and re-installed the software manufacturer labels several times. No luck.

    It seems it all started to go wrong after your update of Safari went wong:

    http://www.Apple.com/support/Safari/

    Link above is for Support of Safari.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    We do not know your Label program Vista compatibility.

    Check if your program is Vista Compatible:

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Windows Vista Compatibility Center

    First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    If this is not Vista compatible, read the info on the link above.
    It works for some programs, but not all.

    This applies to software programs, NOT hardware drivers.

    If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    It comes with Vista, upgrade install and activate Forum.

    Try the Vista programs Forum:

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    See you soon.

    Mick Murphy - Microsoft partner

  • I would like to have the best possible experience for the games on my laptop and I want to download everything that is necessary for the performance of the games.

    I bought a new laptop which has Windows 8. I heard that Windows 8 is new, it only is not automatically provided some 'things' - forgive me for my lack of knowledge in technology. I intend to play games on my new laptop, but according to my knowledge, Windows 8 does not support things like Visual C++ and Directx 9. I am very uncertain about this subject, however. If anyone understands this as am I mean, can you please correct and/or explain more on this topic? I would like to have the best possible experience for the games on my laptop and I want to download everything that is necessary for the performance of the games.

    Original title: what's missing in Windows 8?

    Jack

    We were all new at one point, so don't worry what you know.  Win 8 is compatible with all previous OS.  It supports C++, and depends on your video card supports DIrectX 9, 10 and 11.

    The only thing that doesn't come with win 8 (and since you bought it, it may already be installed) is windows media player.

    What exactly are you trying to do, or can you give us more information for we can help you better?

  • Tried to install Trend Internet Security program, error message, necessary for the installation of Visual C ++ 2005

    When installing Visual C received then Error 1935' Microsoft. VC80. Open MP type = "win32policy", processor version 8.0.50727.762 Architecture = "x 86".

    Running Windows Vista 32-bit - I'm no guru IT but can generally follow clear instructions - can anyone help?

    Hello JenMox,

    Sorry for the delay in publication.

    Look at the following information about the Error 1935.

    Step 1

    This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

    Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

    (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

    (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

    Step 2

    If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 Redistributable Package, and check if you can install the software. Be sure to download the correct version, if your computer is 32-bit or 64-bit.

    Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647

    Microsoft Visual C++ 2005 SP1 Redistributable Package (x 64)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da

    I hope this helps.

    Sincerely,

    Marilyn

  • What drivers are REALLY necessary for the 230 x?

    Hi guys,.

    I recently bought the 230 x - it's great. I also bought an ssd with it and replaced defaultt with the ssd hard drive and did a clean install of Windows 7.

    I have 2 questions:

    -the drivers are REALLY essential for my device? Visualize the page drivers, there are a LOT of drivers that can be installed, but I think that some of them are not really necessary, because I don't want to slow down my superfast x 230.

    -are there a way to download all THE drivers both in place one by one?

    Thank you in advance,

    Mustafa

    Hello and welcome,

    I can't tell you which drivers necessary for what you want to do, but the best way to get them is to install ThinkVantage System Update.  Run it and it will present all the appropriate drivers for the download and installation.

    You can review the details of each before you download and decide which ones you want.  Only, check the box for those that you want and let TVSU download and install to a slap.

    [edit] It is a pure opionion, based on nothing else than my preference: I'd rather live with the installation of Lenovo for awhile and see what I like - and then uninstall the stuff I have not.   IMNSHO, the initial indigestion is not that bad on a ThinkPad.  OTOH, depending on the size of the SSD, a clean installation may be the way to go.

    Z.

  • Size of the database necessary for the composer

    Hey all,.

    I have composer view installation in my lab at home to learn and test its functionality, use SQL Express. Now, I want to test with my business deployment. I need to contact my DBA for the SQL database has been created. I'm not really familiar with databases at all. My manager suggested I join him and our dba ask tell them what size of database we need and create the database. Since then, I don't know much about databases, I have no idea what database size I should be in him asking to create. In addition, should I get this database created on our production or test sql server? I guess production since my end-users will use this and once set up it would be problems move the DB later? Yet once again, I have no idea... so I ask the experts

    Thanks in advance

    Mike

    check this: http://communities.vmware.com/message/1619807

  • The system failure when Adobe Dreamweaver CS6 running for the first time... Why?

    When I downloaded the adobe dreamweaver cs6 and during installation... There is nothing wrong except the screen resolution (required = 1280 * 800, but available = 1330 * 768)

    But when I tried to run the program for the first time, the system had failed.

    Can you help me to know the true cause, please?

    Note: I'm using Windows XP sp1

    CS6 requires a minimum of Windows XP with Service Pack 3. Also, your vertical resolution does not meet the minimum requirements.

  • A .cab file that is necessary for the installation can not be trusted. Please check Cryptographic Services are enabled and the certificate file is valid. »

    OT: URGENT HELP!

    Hi, I searched ALL the DirectX solutions and yet he's just not going to download! I just want to play Gmod but I need DirectX 11. Whenever I try to download DirectX it says 'a necessary .cab file for installation can not trust. Please check Cryptographic Services are enabled and the certificate file is valid. "I have my encryption services activated, but it STILL refuses to download. -HELP-

    Hello

    I'm sure that DX11 is already a part of win 8...

    Maybe what you really need...

    DirectX Runtime June 2010, which is an optional update that needs a lot of games.

    Even my Lexmark printer requires... I'll include a link to the full installer...

    This is a package to free extraction. It will extract after double-clicking it so be sure to note the location where extracted you\it.

    Open the folder, and then double-click DXSETUP.

    http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  • HP G71-329WM: driver Sata necessary for the installation CD of Windows to see the new hard drive

    I have my own Windows 7 disk that can be used to install a lean and clean the operating system, however, it seems that the hard drive is not recognized without a sata driver any. I had to do this once with an HP laptop so that the Windows Setup CD see the hard drive. Unfortunately, I do not see such a driver downloads available for this laptop model. Can make you a suggestion on where I can find this driver?

    Hello:

    With the material of your laptop, you should not need the driver but here is the link for those that you need...

    The first file is for 32-bit and one for 64-bit.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=18668&lang=eng

    To install the driver, download and uncompress the files that you need a USB FlashDrive without all records.

    With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

    After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

    You should now see the storage driver files listed.

    If you check the box, it only includes the compatible driver.

    Follow the prompts and I hope, will install W7.

  • the DirectX installation failed. A .cab file that is necessary for the installation can not be trusted. Please check the Crptographic Services are enabled and the certificate file is valid

    installation of direct x

    Whence this installation of DirectX?

  • PS Installation - is it necessary for the loading of projects PPLTLS84CUR etc although my version of peopletool is 8.53

    Hello

    Please specify:

    I have install Peopletools 8.53 (new installation) on my laptop. After you have created the database and scripts of dms required running, is required to load the project file as PPLTLS84CUR, PPLTLS84CURDEL etc? Because my tools already are 8.5 X and the project name is 84. It's a bit confusing because installed (8,53) is higher and you load a project with fewer 8.4 (PPLTLS84CUR).

    Thank you

    RK

    Hi RK,.

    In installing PeopleTools 8.53 for Oracle guide

    Task 7-2: update database to the latest version of PeopleTools

    He states:

    This task must be performed for all applications where the version of PeopleSoft PeopleTools of the database which was delivered is different from the PeopleSoft PeopleTools version that you are running.

    To check the version of PeopleSoft PeopleTools for your application database, run this SQL query:

    Select TOOLSREL from PSSTATUS

    If the version of PeopleTools isn't 8.53, you run this task. Otherwise, perform the task running of Scripts additional Data Mover.

    Thank you

  • Necessary for the installation of CS3 CS4?

    I had the new imac and had to reinstall CS4 for a reason any.

    They I want to install CS3, (sometimes I need to upm rear and there is a filter I think only works with version CS3).

    So I put in the installation of CS3 disc, it is starts and in the middle of it says, continue for CS4 installation disc.

    I got confused and all just canceled everything.

    But why a CS3 installation asked me to install CS4 disc? Thank you.

    With a Mac you can have both installed, but I think (at least I still got to do it this way) you need to install CS3 first. If you have CS4 out there and you try to install CS3 it does not because there is some library files that cannot be reversed to accommodate the "old" installation

Maybe you are looking for

  • Satellite C660 request password

    When I start my computer it displays a black screen with a blue box that says enter password.I don't understand why it happens, or what should be the password. Can anyone help please?

  • How to change the size of partitions on Equium P300-16 t

    I just bought a Toshiba Equium P300-16t.The Vista disk and the data disk are * + PREINSTALLED + * and have about 95 GB (50%) each.I want to re partition so that the Vista disk has a much higher percentage. If anyone can help? _David (UK) _

  • Replay audio output on Standard Dock alarm?

    I bought the dock/entertainment both the standard dock by Motorola and the alarm plays through the loudspeaker in the handset and not the output audio dock, y at - it an option to enable this and if Motorola can not add this feature in the next updat

  • Unable to sign applications WebWorks

    Hi all I created a Blackberry WebWorks app, which works well in development mode that uses.  However, when I try to add to our BES 12 server I get the following message; An error has occurred. The application is not signed correctly and cannot be add

  • I can target fat with GREP - in dialog paragraph styles?

    Hello.I have a number of paragraphs which are mainly "regular" (as the font style: ordinary) but they also have a few bold throughout.I'm doing a paragraph style that will apply a character style to text bold using GREP.Is there a GREP code for this