insalled wifi printer epson computor doesn't communicate don't not to print e-mail

Similar Questions

• WIFI doesn't work don't not on Satellite Pro A100

  Initially I thought it was a driver problem. WLAN switch is active, and I get no WLAN. Worse than that, it seems there is no hardware detected.
  The Panel, I took off and the jury is there, and I reinstalled it. Any other ideas?

  First, you need to check if the wireless card was recognized and is located in the Device Manager! Check under network adapters.

  If the card WLan isn t it and you see a yellow exclamation mark then you need to install a compatible WLan driver!
  All Toshiba drivers can be downloaded from the European driver Toshiba page and should the functions!

  But it s very interesting to know if you are using the preinstalled OS original Toshiba!
  If you are using this operating system image of Toshiba and then everything should work properly!

• WiFi doesn't work don't not on vostro 3460 after installation of windows 8

  HII,

  I have vostro 3460, after installing wireless window 8 works do not, I downloaded the driver wireless dell site, but its not to proceed with the installation

  Please help me

  OK, I found a solution

  -Download the 1 x 1 Dell Dell Wireless WLAN 802.11b/g/n (2.4 GHz), the Bluetooth v4.0 + HS driver (link: Network_Broadcom_W7_A01_Setup-WTD28_ZPE)

  -Run the file. It will extract to c:\dell\drivers\WTD28. Then an error/warning occurs and that execution is aborted.

  -Open the Windows Device Manager. Find the missing element of WLAN with the yellow exclamation point (here name like 'Network controller')

  -Update the driver manually and use c:\dell\drivers\WTD28 as the path of the driver. It will automatically install and start working.

  Hope it helps someone

• Scan to PDF doesn't work don't not with J4680 all-in-One

  I can't get the scan to searchable PDF (PDF and PDF) file to work as expected with my new J4680.

  It works very well with other formats (TIF, JPG, etc.), but not with the PDF.

  It scans well request for additional pages correctly, and then try to create the PDF file. This is the process fails.

  An empty PDF file (size 0) is created and it fails with an error message:

  unexpected error, click OK to close the program, and perform the following steps:

  -Restart the program; -start the computer and try again. -Reinstall the software and try again

  8, [(6, 261,-2147417851)]

  (freely translated from the German - except for the error number ;-)

  Of course, none of the suggestions above, or any combination of these, or restart the printer works. Any ideas?

  Thanks, the problem is resolved for now.

  Suppot of HP was somehow in the right direction. I uninstalled the drivers all (!) of the 'old' hardware HP (6110 OfficeJect, ScanJet,...), reinstalled the J4680 completely and from there everything worked.

  Internal error (WIN XP) seems to be related to a conflict with older drivers.

  I hope this help if someone having similar problems.

  Thanks again,

  Alex

• HP 15-r127ng: 15-r127ng Hp drivers WLAN adapter doesn't work don't not since HP drivers website

  Hi support them.

  I am trying to install drivers for my new hp-r127ng. The driver for the WLAN on the site doesn't seem to work.

  Hardware for network controller ID is:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  PCI\VEN_168C & DEV_0032 & CC_028000
  PCI\VEN_168C & DEV_0032 & CC_0280

  Please provide me with the correct driver.

  Hello:

  See if these wireless and bt drivers...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_128686_1

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_126765_1

• Customer light HP t5325 doesn't work don't not with VMware View 5

  Hello

  I recently got a slim Pro HP t5325 customer for testing with VMware view 5. I ve the thin client to the latest firmware update:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4063703 & prodNameId = 4063704 & swEnvOID = 4030 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-99080-1)

  who has the view 4.6 customer and according to the VMware compatibility list:

  http://www.VMware.com/resources/compatibility/PDF/vi_view_guide.PDF

  It should work with view 5. But when I try to launch the client and connect to your desktop from view, he asks just a super quick message (which I don't see) and then it brands the "active" session, but it doesn't open anything . View 5 Client on my laptop works very well and I m able to access the same desktop VM.

  My current setup is:

  • vCenter server 5
  • ESXi5
  • VMware View 5

  What Miss me? Any help would be appreciated.

  Thank you!

  David

  Hello

  I had the same problem this week. He is not related to view 5, same problem exists also with 4.6.

  The problem seems to be that when you try to open the connection, the client calls a /usr/bin/view_wrapper.sh script and this script does NOT run with user privileges? However, if you switch to admin and then open the connection this script works well. You can test it by opening the X terminal in the thin client, then the su user and try to run the script manually /usr/bin/view_wrapper.sh start at 0 and you will get a prompt for sudo.

  I tried to add the useraccount 'user' in/etc/sudoers and allow that user rights sudo for view_client and view_wrapper.sh programs. Did not help

  If you add the user 'user' to the root group, connection opens fine but then you let the open thin client for the standard user to mess with.

  Quite a bug in the software? They don't do any test before releasing these?

• Virtual machines communicate don't not via cisco 4001i module, can not ping gateway

  We have just buit IBM blade with a switch cisco nexus 4001i 10gE module.  The service console communicates via a different network module, but VM networks are mapped to network adapters that use the cisco nexus 4001i circulating on 10gE... Unfortunately, the service console connections are working properly, but virtual machines cannot ping the gateway.  We move the virtual machines on the service console network and they work.  The NIC adapaptors are configured to 10, 000mbps but are appearing at only 1, 000mbps.  Currently, we don't have all the switches-dv put in place and run on standard v-switches within ESX, which brings me to this question: VMware does require the nexus 1000v to work with cisco 4001i?  Also, another symptom, the cisco discovery Protocol is not collecting the information since the passage of these adapters that are connected to the 4001i but take the switch info at the other network management modules.

  Anyone have any ideas what we do wrong?

  Had a very similar problem with a very similar hardware.  Turned out to be a problem with a configuration between the Nexus 4000 and Catalyst switches they're connected too.

• some characters on the keyboard doesn't work don't not after macos sierra installation keys on one side does not not after installing sierra on my mac pro book

  keys on one side does not not after installing sierra on my mac pro book

  Hello dssheorey,

  Thank you for using communities Support from Apple. I have a problem with your keyboard after updating is not what you expect. The good news are the following steps will help to solve your problem and get your keyboard working properly again. First, start by resetting the management system (SCM) controller on your Mac:

  Reset the management system (SCM) controller on your Mac.

  If you still having the problem after resetting the SMC, use safe mode to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Sign in to your account in safe mode and test the issue again. Then restart normally and test again to see if this problem is solved.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  See you soon!

• RTE installed but the PC doesn't recognize don't not expansion .vi.

  I'm trying to update an old LV application that will be deployed on multiple computers.  The updates are completed, but I have problems with the installation.  Updates have been tested out on a computer that had LV 7.1 (the original version) and BT 8.6.1.  I removed the LV and all components OR computer and then tried to install and run the .vi via an installer built with application builder.  After realizing that the driver for the PCI card has also been removed, I have installed the driver NOR-DAQmx 8.8.  The installer contains the following...

  (i) a set of .vi created in LV8.6.1, and

  (II) Run-Time Engine 8.6.1 LV

  The of .vi and RTÉ appear to be installed (PC shows C:\Program NIUninstaller Instruments\Shared\LabVIEW Run-file Time\8.6 which contains several .dll files), but the .vi file type is not recognized by the computer.

  No idea what I was wrong?

  The runtime engine (RTE) can only run executable files (EXE), created by the LabVIEW application builder. First create an executable file, and then create an installer that installs the exe file.

  To run the screw, you installed LabVIEW.

• Yahoo Email doesn't work don't not - says running application does not

  will not let me send an email

  Hello and welcome to help of Microsoft answers forums dealing with mainly Microsoft Windows or Windows applications installed on the local computer. I humbly suggest that you ask your question in the section Mail Yahoohelp. You should get a fast and accurate response directly from the source.

  
  Yahoo Mail Help
  To the moderators of the Forum: could you pass this on the forum Internet Explorer ? TIA.

• Wake on LAN doesn't work don't not on my 8.1 Windows R7

  I can't get my R7 running Windows 8.1 to wake up from sleep with a WoL «Magic Packet» State I use a Plugable USB2 (6 AX88178/Realtek RTL8211CL) ethernet adapter. I have six other PCs on my home network, all running Windows 7, and WoL works very well on all of them.

  I activated the WoL function in the bios of R7 and the device settings for the NIC Plugable (for which I have downloaded the latest drivers from Plugable), and I tried to wake up the R7 with the QuickStart feature, on and outside. The R7 is lying just through it all.

  Any suggestions?

  vvprad, thanks for your response. But note that if you uncheck the 'disable', the 'magical' 'waking up' boxes and as the two gray outside. Apparently, let the PC to disable the NETWORK adapter in order to have the rest of the NIC in the PC. Makes no sense, but it's the way Win7 Win8 do.

  Anyway, I tested my NIC USB on your laptop Dell Win7. WoL did not work it either until I enabled wake USB in the bios. So if you use a USB NIC, to look for the right settings for the NETWORK card and USB. As you suggest with the suggestion of USB power setting.

  But here's the gist: I unplugged the NIC port USB3 on my R7 and connected to the USB2 port and WoL woke up. The USB NIC did everything perfectly using the port USB3, but not of WoL.

• I get the message ieframe.dll unresponsive and then internet also said Internet Explorer doesn't work don't not again and again > how to fix this.

  When I received the message on the screen ieframe.dll does not also Internet Explorer announcement that is not responing. I don't have any idea how to solve this problem, or why it happened. Can someone help me?

  Hello

  You use Internet Explorer to surf the internet?

  Follow the steps below and check if that helps

  Method 1:

  I suggest you to optimize IE using the steps below.

  updated 1: clear cached data in Internet Explorer

  1. open Internet Explorer 8.

  2. click Security and then click on delete browsing history.

  3. to remove the historical area of navigation, click on delete.

  2: reset the security settings for Internet Explorer

  1. open Internet Explorer.

  2. click on tools and then click Internet Options.

  3. click on the Security tab.

  4. click on restore all areas by default level, and then click OK.

  For more information visit: How to optimize Internet Explorer
  http://support.Microsoft.com/default.aspx/KB/936213

  Note: Resetting the Internet Explorer will change all of the settings that you made earlier, and it cannot be reversed.

• X120e trackpad button doesn't work don't not like scroller?

  Hi my central scrolling trackpad button does not work. When I press on the cursor turns into the peak of a scroller, but that's all. What I'm missing here? It works like a magnifying glass well.

  Help help please

  The middle button is just a button - it's not a rocker. To actually scroll, you must use the trackpoint (the Red node) once the slider appears.

• I corrupt them as in windows (I think is the windows sidebar) I've done sfc does not I restore doesn't work don't not is still there, I don't know what to do next

  After the restoration, I did the update of windows, but all failed, I can't open internet explore (only in safe mode) I don't have the installation for windows vista disc, but the only three recovery disc the store gave me when I bought the laptop (an ACER aspire 6920g)

  Hello

  1. What is the exact error message you received?

  2. How did you know there is corrupted in windows files?

  3. what exactly happen when you try to make SFC?

  4. what exactly happen when you try to restore, you received an error message?

  I suggest you perform the clean boot with safe mode.

  How to troubleshoot a problem by performing a clean boot in Windows Vista.

  http://support.Microsoft.com/kb/929135

• my dvd rw drive doesn't react don't not to the virgins dvd r

  I m using lenovo y 510. My HITACHI HTS5425 16K9SA00 dvd rw drive is able to recognize/detect written cd & dvd, cd Virgin and Virgin dvd rw but not dvd r.
  After inserting the dvd rw it shows-dvd with 4.7 GB of space but
  on the insertion of dvd r it shows nothing and when I try to burn with dvdr inside, it says - insert a writable disc in drive E
  .i have uninstalled program DVD VIDEOSOFT and LENOVO POWER 2 GO program by following the instructions on threads, but still the problem persistent burning DVDs.
  similar problem was debated at
  www.winvistatips.com/white-dvd-not-found- t583066.html
  and stop windows media player and audio peripheral activation were not useful for my laptop.
  now only you SMART GUYS can help me.

  Hello

  To go through ALL these links? Carefully?

  If you exhausted the above:

  Try to contact your system manufacturer or the manufacturer of car (or even to find a machine with the same version of Windows
  as Vista 32 or 64 bit and the same drive) and get registry settings for this drive, then compare
  paste them into what you have. I would do ALL the 1st store so there is no issue in case you
  in this stage.

  Here are the keys that I believe are only those in question - for the CD in the car of course there will be other subkeys
  subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  The troubleshooter above well corrects registry entries but not all of them. You can probably find
  more info here and maybe even the settiings of accurate record for your CD-ROM drive.

  Forums - a lot of expert real help - looking for someone with the same drive and the version of Windows (32/64)
  http://Club.cdfreaks.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.