Similar Questions

• Insert xml files into the table

  Hi all

  How to create an application, which allows me to download an xml file and insert the file into a table, looking something like what makes the apex, with 'data-> data-> Data Load XML Workshop'.

  I tried to create it using this link https://forums.Oracle.com/message/9170494 # 9170494

  but when loading the file and send it (current executing the "sp") sends the error "ORA-22285: file for FILEOPEN operation or non-existent directory.

  I could slightly auxiliary

  concerning

  This idea is troubling for me.

  The XML file DOES NOT CHANGE.  This is the goal.  You have a DTD/XST that defines where in the XML hierarchy, a data element is and (so) how to access it.  With this information, you can hardcode things.

  Therefore, you should have no reason for that functionality 'map the data column in the table column"of the data loader since all mappings will be always the same.

  As a simple INSERT... The SELECT statement can (and should) be used.

  (use the FUSION if you update / insert data).

  I copy + paste some of my code in a procedure that I use.

  You will need to replace the parameter name (p_filename) with the value of appropriate link (name of item)

    declare
      l_XML XMLType;
    begin
      /* get file from APEX WWV_FLOW_FILES */
      begin
          select XMLType( blob_content, 1 ) -- 1 means that the file is USACII encoded. this may need to be changed.
            into l_XML
          from wwv_flow_files where name = p_filename; -- replace this with the appropriate ITEM NAME
      exception
        when no_data_found then
          raise_application_error( -20001, 'not in FLOW: ''' || p_filename || '''' );
      end;
  
      /* you'll need to figure this one out */
      INSERT INTO T (...)
      SELECT ..
      FROM  XMLTable( '/'
  pasing l_xml
              columns
                     PATH  -- repeat for each "column" you want to extract
          );
  
     delete from wwv_flow_files where name=p_filename;
    end;
  

• Insert XML data from the Table-> back to null

  Dear Experts,
  
  -I have table xml as below:
  
  Example of CREATE TABLE (XML_spec XMLTYPE);
  
  Insert in the example
  Select ' < name of Message = "dataStaticInvestor" type = "IncomingMessage" >
  < name of field = "batchReference" > OPENINGBATCH000000 < / field > < List name = "data" >
  < = record name "data" >
  < name of field = "externalReference" > 01234567890aaaaaaa < / field >
  < name of field = "participantID" > OD001 < / field >
  < name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
  < / recording >
  < = record name "data" >
  < name of field = "externalReference" > 01234567890aaaaaaa < / field >
  < name of field = "participantID" > OD001 < / field >
  < name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
  < / recording >
  < = record name "data" >
  < name of field = "externalReference" > 01234567890aaaaaaa < / field >
  < name of field = "participantID" > OD001 < / field >
  < name of field = "participantName" > EQUITY SECURITIES INDONESIA, PT < / field >
  < / recording >
  < / list >
  < / message > ' double.
  
  Select * example;
  
  create table hasil1 (c1 varchar2 (500), c2 varchar2 (500), c3 varchar2 (500));
  
  -This step I create the procedure to insert xml data into the table as the batch.
  
  DECLARE
  x XmlType;
  BEGIN
  Select XML_SPEC in x for example;
  
  insert into hasil1
  SELECT
  p.Extract('/Record/Field/@externalReference').getstringval (C1),
  p.Extract('/Record/Field/@participantID').getstringval (C2),
  p.Extract('/Record/Field/@participantName').getstringval () as c3
  TABLE (XMLSequence (Extract(x,'Message/List/Record'))) p;
  commit;
  END;
  /
  
  -when the result of select hasil1, the output is back 3 rows and 3 columns, but all data is a null *.
  
  Best regards
  Sigcle

  You don't explain what output you need, but I guess something like this:

  SQL> insert into hasil1 (c1, c2, c3)
    2  select x.c1, x.c2, x.c3
    3  from example t
    4     , xmltable(
    5         'Message/List/Record'
    6         passing t.xml_spec
    7         columns c1 varchar2(500) path 'Field[@name="externalReference"]'
    8               , c2 varchar2(500) path 'Field[@name="participantID"]'
    9               , c3 varchar2(500) path 'Field[@name="participantName"]'
   10       ) x
   11  ;
  
  3 rows inserted
  
  SQL> select * from hasil1;
  
  C1                     C2        C3
  ---------------------- --------- --------------------------------
  01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT
  01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT
  01234567890aaaaaaa     OD001     EQUITY SECURITIES INDONESIA,PT
   
  

• Unable to add a new column to the table of the LCD? Option, just usually add it.

  I have a form of LCD with a table in it. Im trying to simply add a new column to the table. The option is there, but the column appear just after clicking Add the column to the left. I selected a column, right click the space > insert > column to the left. But the habit intsert. The object table properties tab shows lines and colum numbers, but they are grey.
  
  See screenshots:
  
  http://www.emermed.NET/staging/forums...
  
  http://www.emermed.NET/staging/forums...
  
  It is a dynamic array, where a new line can be inserted using a button. Is that the dynamic nature of the question? ID hate to cancel all the flow dynamics and programming just to add a column, and then reapply them all.
  
  Thank you!

  Hello

  You do not add the columns in the object > palette (screenshot 2) of the Table. I suspect that the problem is that it is not enough on the page (in the content area) to add the column. In the screenshot 1, if you look at the width of the column highlighted from the space to the right of the table, you will see that a column can be added due to restrictions of space.

  Reduce the width of the column highlighted (temporarily), and then add a column. Once added, you can resize the columns to match the width of the page.

  Hope that helps,

  Niall

• How to find inserted last record in the table.

  Version: Oracle 10g
  
  I have a table called 'Manufacturing' and 3 columns as mfno, itemname, quantity.
  How to find inserted last record in the table 'manufacturing '.
  
  As I got to know that the Rowid is not a result perfect result. Please provide your inputs.

  user13416294 wrote:
  Version: Oracle 10g

  This is not a version. It's a product name. A version is 10.1.0.2 or 10.2.0.4, etc.

  I have a table called 'Manufacturing' and 3 columns as mfno, itemname, quantity.
  How to find inserted last record in the table 'manufacturing '.

  Not possible as your data model do not answer for him. As simple as that.

  If there is a need to determine an order or associate some time to an entity, then that should be part of the data model - and a relationship, or one or several attributes are necessary to represent this information. Your data model in this case is therefore unable to meet your requirements.

  If the requirements are valid, set the data model. In other words - your question has nothing to do with Oracle and nothing to do with the other pseudo columns in Oracle, the rowscn or the rowid. It is a question of pure data modeling. Nothing more.

• Addictional columns in the TABLE of $ J

  Hello
  
  I need to store additional columns in the TABLE of $ J.
  The reason is:
  
  I build summaries on the tables of my target. The target table does not contain the primary key of the source table.
  He is allowed to delete the data on the source table and in this case, the process must recalculate the summaries. The problem is I know that the primary key of the record deleted on the source tables and I can't recognize what summaries I have to recalculate.
  
  My idea is to use additional columns for a updated key in the ARRAY $ J that would be filled if the record has been deleted.
  
  Any better idea? How could I add some columns of addition to the TABLE of $ J?
  
  Thank you
  Marcin

  OK, so,.
  J$ Table is created by the Journal to create the JKM, stage
  By changing some settings, you can add some information set by Oracle.

  You can change 2 things to recover more than the PK.
  -First of all to the JKM, Journal created in step: change the value of the Capture_values parameter to "both."
  --> This will retrieve the rows in table 2 J$ for an update (UU as the old value) and the United Nations as the new value and integer values for Delete and Insert.

  -You must now change the JV$ and JV$ D views in order to group the 2 lines for the updates.

  I think that's what you need, if I understand.

  Brice

• Select all checkboxes in the column of the table during the 11 G radio button click

  Hello
  
  I have a table where I inserted a checkbox in the column of the table. I have two outside this table option button, Yes and no. When I select the option button Yes all the boxes in the table to spread and when I select any option button all the boxes should get deselected. As the boxes are inside the columns of the table, we can use setSelected(). How to do this please give ideas.
  
  
  
  Thank you.

  Hi, Maxim,.

  Is your table based on a view object or some bean code?
  If it is based on the view object, the column Boolean checkbox is bound to some transient attribute?

  Have you tried view iteration object rows (if your table bound to viewobject) /POJO(if created list of pojo instances in bean and bound to table) and by setting the Boolean attribute related to the box to true/false on valueChangeListener option button?

  Can you post an example of code to get an idea of your problem?

  Jean Lou

  Published by: Israel Jean Lou on October 24, 2009 04:50

• How to remove columns from the table on the master 1-0?

  I have an array of 96 columns with strings. I also have the array of int 96-elemets (mask) with 1 and 0.

  What I want to do is to is to remove (or hide - but I read that it is not possible) all the columns with index corresponding to 0 in the mask table.

  example:

  columns in the table

  1 2 3 4 5

  mask

  0 1 0 0 1

  I want to remove the columns 1, 3 and 4 and leave only 2 and 5 in my table.

  How can I do?

  If I create loop for with i as the index of the column, when I do DeleteTableColumns() columns number decreases, and I get an error of range out of

  Or do I have an option to hide the unnecessary columns (not set their width to 1, it's very ugly-looking)?

  Please help me (())

  Hello rovnyart!

  1. removal of columns in the table:

  I suspect that the reason why you get the out-of-range error is due to fact that in your loop, you delete the columns in the table, you'll eventually end up by referring to a column that no longer exists, because the other columns before it have been deleted. While you remove each column of your table in the loop for example, the column index number will move, because you deleted the other columns in front of her.

  To resolve this, even if you delete a column in your loop, make sure that you take also into account that the index of the column is moved because of the removed columns.

  2 hide columns in table:

  You can use the ATTR_COLUMN_VISIBLE attribute to hide columns in the table:

  http://forums.NI.com/T5/LabWindows-CVI-idea-exchange/add-attr-column-visible-attribute-for-table-Col...

  http://zone.NI.com/reference/en-XX/help/370051Y-01/CVI/uiref/cviattrcolumnvisible_column/

  3 alternatives:

  Note that another alternative would also use a tree instead, control as the tree control also supports the hidable columns:

  http://forums.NI.com/T5/LabWindows-CVI/table-hide-column/TD-p/569773

  Best regards!

  -Johannes

• How to create a status column in the table

  Hello everyone

  I am trying to create a column of the table status in frontview Panel. I enclose a picture with her to say clearly what I say.plz tell me how to create the active status column in the table.

  I want to show green for safety stock and red for safety stock below.

  
  

• How to find the primary key columns in the tables in MS Access using SQL queries

  How to find the primary key columns in the tables in MS Access using SQL queries

  Hello

  This is the forum for Windows Vista programs related issues.

  For better assistance, please try instead the Forums in SQL Server .

  Thank you! Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Query took too much time when adding new column to the table and the index set on this

  I added a new column to the table that contains thousands of records. and created the composite index with three columns (those newly added + two existing column)

  for the specifics. TBL table there are two columns col1, col2

  I added the new column col3 to TBL and created composit index (col1, col2, col3).

  Now for all the records in col3 is NULL. When I choose on this table, it takes too long...

  Any idea what my I do bad., I have check the query plan, it is using the index

  It is solved using collection of statistics using the

  DBMS_STATS. GATHER_TABLE_STATS

  @Top.Gun thanks for your review...

• Error when selecting all the columns in the table

  Hi all

  When I write a query by selecting all the columns of the table fromo using * function as well as another new column, I get the error,

  Select *, to_char (hiredate, 'fmday') day

  WCP

  where to_char (hiredate, 'fmday') ('Monday');

  ERROR on line 1:

  ORA-00923: THE KEYWORD not found where expected

  I need all the columns in the table with the column user-defined 'day '. Is there a way I can get the result like this?

  Hello

  padders wrote:

  Alias table to use...

  Or the name of the table, for example

  Select emp.*, to_char (hiredate, "fmday") as day

  WCP

  where to_char (hiredate, 'fmday') ('Monday');

  The bottom line is that * must be qualified (with a table name or alias) when the SELECT clause includes anything else besides *.

• Get columns from the table shown in the iterator

  Hello...

  I have the table in a collection of standard panel.  So, I can show/hide certain columns in the table using the columns in the view menu.

  Then I'm trying to do is export to excel (using apache poi) by looping through the table iterator.  What I can't do is search if the column is not displayed.  I don't want all the columns that are exported without worrying.  How can I achieve this?

  My bean is similar to the following for loop through the iterator:

  BindingContext bindingContext = BindingContext.getCurrent ();

  BindingContainer bindingContainer = bindingContext.getCurrentBindingsEntry ();

  DCIteratorBinding dcIteratorBinding = (DCIteratorBinding) bindingContainer.get ("EmployeesIterator");

  lines [] oracle.jbo.Row = dcIteratorBinding.getAllRowsInRange ();

  for (oracle.jbo.Row line: lines) {}

  {for (String colName: {row.getAttributeNames ())}

  output to excel cell here using row.getAttribute (colName) m:System.NET.SocketAddress.ToString)

  }

  }

  Thank you.

  Hello

  It's like ask the engine in your car to what colors the seats have. The iterator doesn't know anything about the visible state of a column. If the displayed columns must be determined from the table instance (richeTableau)

  The following article solves exactly the requirement that you have: Oracle ADF: Build Your Own it comes with a sample that you can download here: http://www.oracle.com/technetwork/issue-archive/2013/13-jul/o43adf-1940728.zip

  Have a look at CustomPanelCollectionBean.java:

  The method and code that you want to look for is:

  private String getRowHtml (row rw) {}

  StringBuffer rowHtmlBuf = new StringBuffer();

  Read visible columns in the table of the table instance. This way the

  PanelCollection can be used to show/hide columns and exclude

  printing to HTML

  Table richeTableau = this.getRichTable ();

  the list of columns determine the print attributes

  The list of columns in = table.getChildren ();

  int attrCount = columns.size ();

  rowHtmlBuf.append (this.addRowStart ());

  for (int i = 0; i)< attrcount;="" i++)="">

  for all visible columns, add columns to print

  If (((RichColumn) columns.get (i)) .isVisible ()) {}

  If (rw.getAttribute (i) instanceof ViewRowSetImpl) {}

  ignore the collections of detail used for master/detail example

  constraints in British Colombia ADF

  } ElseIf (rw.getAttribute (i) instanceof oracle.jbo.domain.Timestamp) {}

  shorten date to exclude the infromation times

  SimpleDateFormat sdf = new SimpleDateFormat("dd-MM-yyyy");

  String dateFormatString = sdf.format (((Timestamp) rw.getAttribute (i)) .getData ());

  rowHtmlBuf.append (this.addDataCell (dateFormatString));

  } else {}

  Prnt attribute values and if sure that null values don't raise a NPE. Add a white character to NULL

  attribute values

  rowHtmlBuf.append (this.addDataCell (rw.getAttribute (i)! = null? rw.getAttribute (i) m:System.NET.SocketAddress.ToString ():))

  " "));

  }

  }

  }

  rowHtmlBuf.append (this.addRowEnd ());

  Return rowHtmlBuf.toString ();

  }

  You need to access the Rich Table instance (for example using the JSF component binding) to then compare the attribute in the iterator with the visibility of the column

  Frank

• How to find a value in any column of the table - essentially a search

  Hi guys,.

  Thanks in advance for your help.

  I'll try to find a value in any column of the table? How can I do?

  An example of value would be "FEDERAL."

  Using Oracle 11 g and SQL Developer.

  Thank you

  It's a question that is asked in the past several times (but not recently from what I remember).

  Michaels has provided in the past, solutions which are quite clever, just using SQL...

  10g of solution

  Michaels > var val varchar2 (5)

  Michaels > exec: val: = "Sub".
  PL/SQL procedure successfully completed.

  Michaels > select distinct substr (: val, 1, 11) "keyword."
  substr (table_name, 1, 14) "table."
  substr (t.column_value.getstringval (), 1, 50) ' / value of the column.
  CLO.
  Table
  (xmlsequence
  (dbms_xmlgen.getxmltype ("select" | column_name))
  || 'from ' | table-name
  || ' where upper (')
  || column_name
  || ') as superior (' %' |: val)
  || '%'')'
  ) .extract (' LINES/rowset / * "")
  )
  ) t
  -where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'SERVICES')
  order of the "Table".

  11g upwards

  SQL > select table_name,.
  column_name,
  : search_string search_string.
  result
  from (select column_name,
  table_name,
  "ora: view("' ||) " table_name | "") / LINE /' | " column_name | "[ora:contains (text ()," %' |: search_string | ")]. (%») > 0]' str
  CLO
  where table_name in ('EMP', 'Department')),
  XMLTable (columns str result varchar2 (10) path '.')
  /

  TABLE_NAME COLUMN_NAME SEARCH_STRING RESULT
  ------------------------------ ------------------------------ -------------------------------- ----------
  DEPT                           DNAME                          es                               RESEARCH
  EMP                            ENAME                          es                               JAMES
  EMP                            JOB                            es                               SALESMAN
  EMP                            JOB                            es                               SALESMAN

  4 selected lines.

• Impossible to extract the data of an additional column in the table advance

  Hello

  We have an obligation to add an extra column to the table of advanced search. In addition, we need sort the table using this additional column.

  Now, we have achieved the following:

  1. the required VO was already extended previously and the additional column (LAST_UPDATE_DATE) is already present in the definition of the EO. So, we just added the tag for LAST_UPDATE_DATE in YOUR XML in the form:

  < ViewAttribute

  Name = "LAST_UPDATE_DATE".

  IsPersistent = "false".

  Type = "Oracle.jbo.domain.date"

  ColumnType = "DATE".

  AliasName = 'LAST_UPDATE_DATE. '

  Expression = "LAST_UPDATE_DATE."

  SQLType = 'DATE' >

  < / ViewAttribute >

  2 added a new MessageStyledText column, and updated the following property:

  Prompt = LastUpdateDate. Discover the Instance = TaskPerzSumVO. Display attribute = LAST_UPDATE_DATE. Sort Allowed = true

  The field is now visible in table advance and whenever we seek, attaches the value as ' 1901-01-01'. While I checked manually in the respective table, we have the appropriate data. But in the front end we do not get the data in our additional column of table in advance. In addition, if we try to sort the table by clicking the column LAST_UPDATE_DATE, we get the NPE error. Spec of NullPointerException is as follows:

  # # 0 in detail

  1. java.lang.NullPointerException

  at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:989)

  Kindly help us to obtain the appropriate data in the additional column. Thank you!

  Kind regards

  Zahid

  Hi Zahid,

  This is the error:

  29000: unexpected exception caught: oracle.jbo.NoObjException, msg = Houston-25003: TaskEO.LAST_UPDATE_DATE object of type entity activity not found

  Tag entity by its use should have only name of EO and not the name of the attribute.

  Use instead under the tag:

  EntityUsage = "TaskEO".

  Also, I mentioned that rather tags manually, add it please try Wizard VO to add this attribute in EO attributes available list.