Insert data into the table from the flat Flie

Similar Questions

• inserting data into a table from another table

  Hello

  I have a to insert a data in the other table.

  My requirement is I field Date_effect_date in the departments, I would copy the details field in dept_effect_date of employees.

  I used the query

  Insert in the dept_effect_date of certain employees (dept_effect_date) departments;

  and the result is:

  SQL error: ORA-01400: cannot insert NULL into ('HR'. "'"' EMPLOYEES'."" EMPLOYEE_ID')

  01400 00000 - "impossible to insert a NULL value in (%s)."

  MY DB: oracle 10g XE

  Sainaba

  You can do this by UPDATE not INSERT.

  Sudheeryekkala wrote:

  Hello

  I have a to insert a data in the other table.

  My requirement is I field Date_effect_date in the departments, I would copy the details field in dept_effect_date of employees.

  I used the query

  Insert in the dept_effect_date of certain employees (dept_effect_date) departments;

  and the result is:

  SQL error: ORA-01400: cannot insert NULL into ('HR'. "'"' EMPLOYEES'."" EMPLOYEE_ID')

  01400 00000 - "impossible to insert a NULL value in (%s)."

  MY DB: oracle 10g XE

  Sainaba

  INSERT the results of will by adding new lines to the table so you have the above error. In your case, you must update the value of the existing column

  (or, if the volume is large, then fill the data -

  join the table two in a new table CREATE TABLE EMP_NEW AS SELECT * FROM EMPLOYEES, DEPARTMENTS .

  fall of ;

  Rename emp_new to ;

  * constraints/indexes if necessary be supported...

  )

  E employees update

  Set e.dept_effect_date = (select d.dept_effect_date

  departments d

  where e.dept_id = d.dept_id);

  Concerning

  Biju

• Insert data into the source of destinator Table

  Hi all

  Need to insert data in sample_table1 table xxc_source_table sample_table2

  create table xxc_source_table (DESCRIPTION varchar2 (10));

  Insert the table xxc_source_table values('A201.) ABC.4084.GR');

  create table sample_table1 (col_1 varchar2 (10), col_2 varchar2 (10), col_3 varchar2 (10), col_4 varchar2 (10));

  create table sample_table2 (col_1 varchar2 (10), col_2 varchar2 (10), col_3 varchar2 (10), col_4 varchar2 (10), moved_flag varchar2 (2));

  col_1 = A201

  col_2 = ABC

  col_3 = 4084

  col_4 = GR

  Note: Insert data into the col_1, the col_3, the col_4 of the xxc_source_table sample_table1

  (2) if the next (form xxc_source_table) data is exist in the sample_table2, and then set the moved_flag as Y in this column

  3) xxc_source_table has 17000 lines

  Thank you.

  Post edited by: Rajesh123 please do not consider cross the line message

  Hi Renon,

  Why you don't want substr and instr? For best performance, you should go with substr and instr instead of regexp_substr. However you asked me to provide the code instead of substr and InStr. Then try the below...

  INSERT ALL

  IN VALUES sample_table1 (col1, col2, col3, col4)

  IN sample_table2 VALUES (col1, col2, col3, col4, 'Y')

  SELECT REGEXP_SUBSTR (DESCRIPTION,'[^.] +', 1, 1) col1,.

  REGEXP_SUBSTR (DESCRIPTION,'[^.] +', 1, 2) col2.

  REGEXP_SUBSTR (DESCRIPTION,'[^.] +' 1, 3) col3.

  REGEXP_SUBSTR (DESCRIPTION,'[^.] +' 1, 4) col4

  OF xxc_source_table;

  Thank you

  Ann

• What trigger to use to insert data into the table db forms

  Hello
  
  My form is current having a block of database with the table reference. When you enter data into the form field and click Save. Automatically record is inserted in the database table.
  I want to do this under manual insert. I changed the block of data to a data non-base. Where should I write the insert statement to insert data into the table.
  Is - shutter release key of the form-level validation?
  
  Please notify.
  
  Thank you
  Didi.

  You can guide me how to remove the message FRM-40401 no changes to save and instead, I wanted to put 1 transaction record successful... some like it like that.

  Hi didi.
  And this is my last post I'll sleep. ;)
  Take form level trigger named preform
  and write on it

  :SYSTEM.MESSAGE_LEVEL := 5;
  

  I hope this works...

  Hamid

  Mark correct/good to help others to get the right answers. *

• How to insert data into the table by using the expression builder in the assign activity

  How to insert data into the table by using the expression builder in affect business in BPEl, I use SOA Suite 11.1.1.5
  Can someone help me please

  Hello

  I don't think that oraext:query-database() can insert data into the table.

  What are your needs?
  Can not you plan to use the DB adapter with the insert operation?

  Kind regards
  Neeraj Sehgal

• How to insert data into the BLOB column

  Hi all
  
  Can someone help me to insert data in the BLOB data type column?
  
  The structure of the table is
  CREATE TABLE XXATFL_DM_FORCAST_STG
  (
  TASK_ID NUMBER,
  USER_ID NUMBER,
  CREATED_BY NUMBER (15),
  CREATION_DATE DATE,
  LAST_UPDATED_BY NUMBER (15),
  DATE OF LAST_UPDATE_DATE,
  LAST_UPDATE_LOGIN NUMBER (15),
  RECORD_STATUS VARCHAR2 (1 BYTE),
  ERROR_MESSAGE VARCHAR2 (4000 BYTE),
  DATA_FILE BLOB
  )
  
  I want to insert data into the column DATA_FILE. and this insert statement inside a procedure.
  
  Please help me as soon as possible because it is very urgent for me
  
  Thank you and best regards,
  Charrier

  Charrier,

  If you form the string yourself, you can use the function utl_raw.cast_to_raw on your channel.

  http://download.Oracle.com/docs/CD/B12037_01/AppDev.101/b10802/u_raw.htm#997086

  sql> create table t(
    2    id number,
    3    l_blob blob
    4  );
  
  sql> insert into t values(1, utl_raw.cast_to_raw('SampleString'));
  
  1 row created.
  
  sql> commit;
  
  Commit complete.
  

• Cannot insert data into the database

  Hello world

  I stuck with a problem in DB juice. When I try to insert data into the database using DB tool, I get a repeated error message (error 1). Please find the my vifile below and solve say.

  Problem is use Labiew 8.2. So try to answer accordingly

  Try it with a cluster instead of a string or an array.

  

• How to insert data into the database using smartview

  Hello
  I am trying to insert data into the database using * "Send data" * button on the Ribbon of Essbase.
  My database is empty.
  
  I opened an ad hoc network, it returns * "#missing" * in all cells
  I have modified the cells and provided data in the cells that I want to. Now, I supported on * "Send data" * button.
  It just reloaded the adhoc grid instead of submit data, I rechecked the data through data console Administrative Service are not inserted.
  
  I am following the right way to insert data? If not, could you please suggest me how (Populate) insert default data in the database?
  
  --
  VINET

  You go about it the right way, once you have submitted if you réactualisiez then data values should be there, if you POV is against members of dynamic calc and then data not written to the database, you need to check the Member properties of your POV.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Doubt about inserting data into a table

  Hi all, when I try to insert data into a table through an anonymous block, the pl/sql block runs successfully, but the data are not get inserted. Can someone please tell me where I am doing wrong?
  

  SQL> DECLARE
    2
    3  V_A NUMBER;
    4
    5  V_B NUMBER;
    6
    7  v_message varchar2(25);
    8
    9
   10  BEGIN
   11
   12
   13  select regal.regal_inv_landed_cost_seq.NEXTVAL into V_A from dual ;
   14
   15  select regal.regal_inv_landed_cost_seq.currval into V_B from dual ;
   16
   17  INSERT INTO rcv_transactions_interface
   18  (
   19               INTERFACE_TRANSACTION_ID,
   20               HEADER_INTERFACE_ID,
   21               GROUP_ID,
   22               TRANSACTION_TYPE,
   23               TRANSACTION_DATE,
   24               PROCESSING_STATUS_CODE,
   25               PROCESSING_MODE_CODE,
   26               TRANSACTION_STATUS_CODE,
   27               QUANTITY,
   28               LAST_UPDATE_DATE,
   29               LAST_UPDATED_BY,
   30               CREATION_DATE,
   31               CREATED_BY,
   32               RECEIPT_SOURCE_CODE,
   33               DESTINATION_TYPE_CODE,
   34               AUTO_TRANSACT_CODE,
   35               SOURCE_DOCUMENT_CODE,
   36               UNIT_OF_MEASURE,
   37               ITEM_ID,
   38               UOM_CODE,
   39               EMPLOYEE_ID,
   40               SHIPMENT_HEADER_ID,
   41               SHIPMENT_LINE_ID,
   42               TO_ORGANIZATION_ID,
   43               SUBINVENTORY,
   44               FROM_ORGANIZATION_ID,
   45               FROM_SUBINVENTORY
   46  )
   47
   48  SELECT
   49       regal.regal_inv_landed_cost_seq.nextval,      --Interface_transaction_
  id
   50       V_A,                                          --Header Interface ID
   51       V_B,                                          --Group ID
   52       'Ship',                                       --Transaction Type
   53       sysdate,                                      --Transaction Date
   54       'PENDING',                                    --Processing Status Code
  
   55       'BATCH',                                      --Processing Mode Code
   56       'PENDING',                                    --Transaction Status Cod
  e
   57       lc.quantity_received,                          --Quantity
   58       lc.last_update_date,                          --last update date
   59       lc.last_updated_by,                           --last updated by
   60       sysdate,                                      --creation date
   61       lc.created_by,                                --created by
   62       'INVENTORY',                                  --Receipt source Code
   63       'INVENTORY',                                  --Destination Type Code
   64       'DELIVER' ,                                    --AUT Transact Code
   65       'INVENTORY',                                  --Source Document Code
   66        msi.primary_uom_code ,                       --Unit Of Measure
   67        msi.inventory_item_id,                        --Item ID
   68        msi.primary_unit_of_measure,                  --UOM COde
   69        fnd.user_id,
   70        V_A,                                         --Shipment Header ID
   71        V_B,                                         --SHipment Line ID
   72        82,                                           --To Organization ID
   73        'Brooklyn',                                     --Sub Inventory ID
   74        81,                                            --From Organization
   75        'Vessel'                                       --From Subinventory
   76
   77    FROM
   78       regal.regal_inv_landed_cost_tab lc,
   79       fnd_user fnd,
   80       mtl_system_items msi
   81
   82    WHERE
   83       lc.organization_id = msi.organization_id
   84       AND  lc.inventory_item_id = msi.inventory_item_id
   85       AND  lc.created_by = fnd.created_by;
   86
   87  commit;
   88  v_message := SQL%ROWCOUNT;
   89  dbms_output.put_line('v_message');
   90  END;
   91  /
  v_message
  
  PL/SQL procedure successfully completed.
  SQL> select * from rcv_transactions_interface;
  
  no rows selected

  Thanks in advance!

  There is no problem with inserting data!
  Only there is no data! This means that your select statement retrieves no rows.
  You can see the output of your program (0). This means that there where no line in the result set.

  Please check the output of your tax return independently:

  SELECT
  --        regal.regal_inv_landed_cost_seq.nextval,      --Interface_transaction_id
   --       V_A,                                          --Header Interface ID
  --        V_B,                                          --Group ID
          'Ship',                                       --Transaction Type
          sysdate,                                      --Transaction Date
          'PENDING',                                    --Processing Status Code
          'BATCH',                                      --Processing Mode Code
          'PENDING',                                    --Transaction Status Code
          lc.quantity_received,                          --Quantity
          lc.last_update_date,                          --last update date
          lc.last_updated_by,                           --last updated by
          sysdate,                                      --creation date
          lc.created_by,                                --created by
          'INVENTORY',                                  --Receipt source Code
          'INVENTORY',                                  --Destination Type Code
          'DELIVER' ,                                    --AUT Transact Code
          'INVENTORY',                                  --Source Document Code
           msi.primary_uom_code ,                       --Unit Of Measure
           msi.inventory_item_id,                        --Item ID
           msi.primary_unit_of_measure,                  --UOM COde
           fnd.user_id,
    --       V_A,                                         --Shipment Header ID
  --         V_B,                                         --SHipment Line ID
           82,                                           --To Organization ID
           'Brooklyn',                                     --Sub Inventory ID
           81,                                            --From Organization
           'Vessel'                                       --From Subinventory
       FROM
          regal.regal_inv_landed_cost_tab lc,
          fnd_user fnd,
          mtl_system_items msi
       WHERE
          lc.organization_id = msi.organization_id
          AND  lc.inventory_item_id = msi.inventory_item_id
          AND  lc.created_by = fnd.created_by;
  

  Published by: hm on 13.10.2011 23:19

  I removed the references of the sequence and the variables V_A and YaeUb.
  BTW: Why do you want to include V_A and YaeUb in two different columns?

  The use of sequences in your code seems a bit strange to me. But this has nothing to do with your question.

• Insert data into Oracle DB from MS Access Forms

  Dear professionals,
  How to insert data into the table that reside in the Oracle DB through MS Access forms?
  We have already created ODBC link tables Oracle allows you to select data, and it works.
  Unfortunately, we can select only the data, but insert, delete and update are not available via MS Access form, even if the user has all permissions on the oracle DB (grant select, insert, update, delete on oracle_table to access_user).
  
  
  driver: Microsoft ODBC for Oracle
  MS Access 2003
  Oracle DB 10.2
  
  THX in advance,
  Adnan

  One would need to know what means "not available". You get a specific error? As far as I know your statement is simply incorrect.
  There are perhaps incompatibilties between DLLs Microsoft and Oracle, I would avoid the Microsoft ODBC for Oracle driver like the plague!

  ---------
  Sybrand Bakker
  Senior Oracle DBA

• Read the BLOB and insert data into a table

  Hi all

  Let us examine below on Oracle DB 12 c:

  create table xx_test3 (c blob);
  
  insert into xx_test3 (c) values (utl_raw.cast_to_raw(
  'azertyuiop,qsdfghjklm,wxcvbn'));
  
  
  create table xx_target (col1 varchar2(50));
  
  
  
  

  Can someone guide me how to read the data and insert it into the xx_target table?

  Necessary result is:

  
  select * from xx_target;
  
  
  COL1                                              
  
  --------------------------------------------------
  azertyuiop                                        
  qsdfghjklm                                        
  wxcvbn                                            
  
  3 rows selected.
  
  
  
  
  

  Thanks in advance,

  Stoyanov.

  insert into xx_target (col1)

  with the data as)

  Select utl_raw.cast_to_varchar2 (dbms_lob.substr (c, 32000, 1)) CBC

  of xx_test3

  )

  Select regexp_substr (CBC, ' [^,] +', 1, level)

  from the data

  connect by level<= regexp_count(src,="" ',')="" +="">

• Insert data into the same table based on certain conditions

  Hello. I'm new to this forum.
  I have to write a stored procedure to insert data in a table MYTABLE say, having a structure like:
  
  Col1 Col2 Col3... TotalInstallments CurrentInstallment PaidAmount MonthYear
  I have to insert all the data that it is in the same table (MYTABLE) except change some fields based on certain conditions:
  
  1. if PaidAmount > 0 & & CurrentInstallment < TotalInstallment then
  
  CurrentInstallment = CurrentInstallment + 1
  
  2. in the field MonthYear I have data ex. 01/2012, 11/2012 formate(month/year)...
  
  So, I have to insert data by incrementing the month and year. for example:
  
  If currentdata is 11/2012 next data will be 12/2012
  
  But following will be 01, 2013
  I have to select all records that belongs to the previous month (across the field MonthYear) and put the audit on each record selected and insert data and then turns them into table (MYTABLE) even.
  
  How to achieve that?
  
  Thank you.

  978184 wrote:
  Hello. I'm new to this forum.
  I have to write a stored procedure to insert data in a table MYTABLE say, having a structure like:

  Col1 Col2 Col3... TotalInstallments CurrentInstallment PaidAmount MonthYear
  I have to insert all the data that it is in the same table (MYTABLE) except change some fields based on certain conditions:

  1. if PaidAmount > 0 & CurrentInstallment

  CurrentInstallment = CurrentInstallment + 1

  2. in the field MonthYear I have data ex. 01/2012, 11/2012 formate(month/year)...

  So, I have to insert data by incrementing the month and year. for example:

  If currentdata is 11/2012 next data will be 12/2012

  But following will be 01, 2013
  I have to select all records that belongs to the previous month (across the field MonthYear) and put the audit & on each of the selected data record and insert then turns them into table (MYTABLE).

  You can do this way:

  This is not tested, but if you can provide the example of table structure and data (IN create table and insert scripts), it can be put to the test.

  insert into your_table
  (col1, col2, col3...current_installment, month_field)
  select col1, col2, col3..,
         current_installment +
         case when paidamount > 0 and current_installment < total_installment then
          row_number() over (
                              partition by column1, column2,.. columnn      -->You may choose partition if you want the
                                                                            --Increment of Current_installment to reset after particular combination ends
                              order by primary_key        -->Order the Increment, you may choose to add more columns to order by
                            )
        else
          0                                               --> if condition is not met, then Add 0
        end curr_installment,
        add_months(to_date(month_field, 'MM/YYYY'), 1) nxt_month
    from your_table;
  

• inserting data into the table

  Hi all
  I use forms [32 bit] Version 6.0.8.24.1 (Production)
  Oracle Database 10g Release 10.2.0.1.0 - Production
  I have settings such as the (optional) emp_code and the year (mandatory field - four digits).
  Based on the setting that I have to get the detail of a table and these must be inserted at the other table with columns of additions (to hardcode the additional columns).
  To achieve this, I intend to get a cursor by selecting the required fields in the table by the way the where clause of the cursor parameters.
  by making a loop through the cursor I will insert the records in the other table.
  Here, the thing is that the data is going to be huge (since the year is the parameter).
  so my approach causes the performance issue.
  I heard that there is a different method of insetions
  can anyone suggest me the best way (performance wise) other than what I mentioned (if you are aware of)...
  
  Thank you...

  user13329002 wrote:
  Thanks for everyone.
  I have to take the data from the table as e_name, e_code, of the table and insert it into another table with some other values such as
  e_name, e_code, as well as I add 'n', 'o'.
  its something like

  insert into e_emp(emp_name,emp_code,emp_add,emp_status,emp_type)
  select e_name,e_code,e_add,'O','N')
  from e_table
  where e_date = Parameter.
  

  in other words, the values for Emp_status, emp_type I have no values in the e_table.so table and enter in e_table I have to hard code it.
  CAL I hard code as I mentioned in my statement example

  can someone clear me of the foregoing.

  Thank you...

  Published by: user13329002 on February 15, 2011 20:11

  Yes... You can hardcode the values for Emp_status, emp_type.

  SQL> CREATE TABLE e_emp(emp_code NUMBER(10),emp_status VARCHAR2(1),emp_type VARCHAR2(1));
  
  Table created.
  
  SQL> create table e_table as (select * from e_emp);
  
  Table created.
  
  SQL> INSERT INTO e_table(emp_code) VALUES('1111');
  
  1 row created.
  
  SQL> insert into e_table(emp_code) values('2222');
  
  1 row created.
  
  SQL> select * from e_table;
  
    EMP_CODE E E
  ---------- - -
        1111
        2222
  
  SQL> insert into e_emp(emp_code,emp_status,emp_type) (select emp_code,'0','N' from e_table);
  
  2 rows created.
  
  SQL> select * from e_emp;
  
    EMP_CODE E E
  ---------- - -
        1111 0 N
        2222 0 N
  
  SQL> 
  

  I hope this helps.

  Kind regards
  Claudy

• cannot insert data into the PRODUCT_USER_PROFILE table

  I've connected to the database as the sysdba, which is installed on VMWARE. database is oracle 11g.
  whenever I insert data in the table PRODUCT_USER_PROFILE that the database returns 1 row inserted and then when I try to show everything on the table before or after the statement commit is made the database returns "No. LINES SELECTED.
  
  guys any idea about this problem...

  Hello

  Try to connect as a system and make the insert and check. Always think about the issue.

  -Pavan Kumar N
  Oracle 9i / 10g - OCP
  http://oracleinternals.blogspot.com/

  Published by: pounet on January 4, 2010 16:29

• Error inserting data into the database of JSF

  Hi all
  
  I have a form and a button of validation. I created the form using the editable view object created on an entity object. When the student has table (base table of data in which I have to enter data) was empty, I managed to insert the data into the table.when I run the same second time application it shows data that I entered previously. But iam able to modify this data and insert the new record again. What should I do so that it does not show the data I already inserted previously when I run again. I think that iam missing something. Please suggest.
  
  Thank you.

  Here are two ways to achieve the same thing:

  -If you use taskflows, you can add createInsert action as activity by default and then have a navigation from this at the registration page so that the creation form will be shown on the loading of the page. As a result, you can directly enter and validate.
  -If not, have binding action createInsert in your pagedef and add an executable invokeAction for the same thing with prepareModel so that the registration form empty appears when loading the page

  Jean Lou

• Simple procedure to insert data into a table

  Hello

  I am trying to create a simple procedure to insert the data into the emp table.

  He throws after WARNING:

  The procedure that is created with compilation errors.

  CREATE or REPLACE procedure ins_emp (empno emp.empno%type,ename emp.ename%type,deptno emp.deptno%type)

  IS

  Emp.empno%type,P_ename emp.ename%type,P_deptno emp.deptno%type P_empno;

  BEGIN

  Insert into emp values (empno, ename, deptno);

  Ins_emp END;

  And when I try to run it

  execute ins_emp(1111,'abcd',20);

  He is to launch another error:

  PLSQL - 00905:OBJECT SCOTT. INS_EMP is not valid.

  can someone help me with this procedure?

  Thank you

  Hi Frank,.

  I thank very you much for your comments.

  I have a question:

  unless the procedure or function created with compilation errors, we cannot run them right.