Insert the video on the legend of failure in training mode

Similar Questions

• Audio on the legend of failure

  Using Captivate 8, on a quiz slide, there is a legend of the failure. When the legend of the failure appears it must play an audio file.

  Here are the steps I did: choose the legend of failure. Then you click on the Audio menu, and then choose Import to > object.

  When I look at the advanced audio management, audio object is listed as it should. However, when previewing the project, by incorrectly answering the questionnaire slide and pressing the Submit button, the legend of the failure appears but plays the audio.

  Y at - it a trick to make the audio playback when appears the legend of failure?

  I can confirm that this is a problem in Captivate 8 but not in Captivate 9.

  But it will certainly NOT to get fixed or patched in Cp8 Cp9 now than is currently available.

• More stuck small simulation on larger project. Can't see the legends of failure

  I pasted a number of smaller blades explaining how to run a process step by step on a project wide (by using a blank slide for the latter), but I do not see the legends of failure for click boxes. However, I see the "tips" popping up. Any suggestions as to why I see a kind of legend, and not the other?

  I forgot, but now I see, you're on CP7, right? Any of the forms on the slide is interactive (button)?

  Could you try to copy a blank slide from another project, that has a theme that do not spoil the slide blank? I suspect it has to do with this model of slides, indeed.

  I still don't understand why you do simulations in another resolution. With this workflow, I understand, but you're talking about copy/paste?

  Create and use a Master blade 'Knockout' - Captivate blog

• Duration of the legend of failure in drag / move (Captivate 8)

  How to set the caption of the failure in drag and drop to stay longer or stay indefinitely? For the moment, he disappears after 3 seconds. I have changed the preferences of text captions to stay for the rest of the slide, but it does not work. I use 8 Captivate.

  Settings for text captions aren't going to help.

  Select the legend of failure, look in the timing Panel, to change his "timing"

  

• Drag and drop the legend of failure time

  Hello

  I did a Drag and Drop in captivate 8.

  I want to keep the legend of failure more visible.

  Is it possible to increase the time of the legend of failure?

  Thank you

  Select the legend of failure and change "timing" in synchronization properties panel:

  

• Assessment of the legends of failure in Captivate 9

  With regard to the registration of a new Simulation software > assessment Cap 9:

  I enabled Edit > Preferences > record Modes > assessment Simulation > click boxes > failure Caption

  When I record an assessment, however, it inserts failure of forms instead of legends of the failure.  It's embarrassing because I can't use ("tails") legend options that are available with legend styles to point to a very specific place on the screen.  Is to generate captions of failure instead of forms like in Cape 7 anyway?

  Thank you

  The forms are much more flexible than the legends, you can even move the "tail" of the forms of the legend.

  But it's your choice: for the demo mode, you can override the global setting in preferences, default values (to the CP9, default value is forms instead of legends) under record Modes. This isn't the case for the assessment that follows the global setting in preferences, default values. Legends of failure never will, however, have a tail, not as a form, and not as legend. As you choose a 'tail' to the legends version, you can also change to such a version of forms (form of replacement), even with more possibilities for the 'shape' of this form.

  Preferences apply only to new simulations. If you want to convert existing slides, use the context menu, return to the text of the legend.

• Does anyone have a resolution for the legends of failure box click works does not after publication in Captivate 7?

  The legends of the insufficiency of work during preview, but not when the file is published. I have read other entries in the forums and I tried to remove the captions and add it again, made sure the click box is at the top of the timeline and tried different. I have the number of attempts the infinite value, that I know has been a problem in previous versions, but I have another project where these settings are working.

  Any resolution would be greatly appreciated!

  Are you still on CP6, exit right SWF?

  In this case: a box of big click under the box click on the green button (same point of suspension) and use the action of the success of this big box click to give the failure message.

• Captivate 8 - click boxes and bar of the player when shooting in 'Training' mode

  Whenever I have the movie in training mode I have the settings so that the click boxes will be automatically added to the project; However, every time that I read the slides that have the auto added click boxes, of the Player bar does not appear. I then manually replace the auto added boxes. When this is done, the Player bar reappears.  Looks like a lot of effort. Any ideas?

  It is a design logical for me, if it were not the case I would disable the PlayBar manually. If you have a PlayBar, the user can simply rub with the progress bar and not learn anything at all. Training assume they can only progress when after completing action on each slide, either by clicking on a location or type a text in BER.

• How to apply/generalize the same text of failure in all Failure_Caption in the project in order to avoid manually change in each legend of failure?

  How to apply/generalize the same text of failure in all Failure_Caption in the project in order to avoid manually change in each legend of failure?

  For example the 'wrong' text in all the legend of failure

  You can set the default text that appears in all the legends of failure for the quiz via the parameters for the Quiz questions.  However, after you have made changes here that will affect quiz slides that you add AFTER that, change.  There is no way to change the text in all the legends of defect EXISTING at the same time.  You will have to select each one and replace the current text manually.  If you firmly believe that you will need to do this more than once, you might consider using a user Variable that displays as the value in the legends of the failure.  Then you can edit them while changing just the value of the user variable.

• Legend of failure to replace the caption text

  Hello

  How would I be able to achieve the following in Captivate 5:

  Location:

  I have an image, a clickbox on it and a text caption requiring the learner to click the clickbox. If someone clicks on the clickbox, a legend of the failure appears.

  I'm looking for:

  Currently, the legend of failure shows for the duration of the slide (3 seconds), then he disappears and returns to the text caption. However, I want the legend of failure to replace the text of the caption completely.

  Can anyone advise me on what I should do?

  Thank you!!

  Hello BettinaK,

  Welcome to the Adobe forums.

  You can set the timing for the legend text in its properties lets say 3 seconds. After 3 seconds, it will disappear.

  Now if the user clicks the clickbox, you will get 'type text of failure here', you can click on it and set the ignition for it, like the rest of the slide.

  Here are the screenshots

  Step 1 > your slide is something like this (I'm sorry to not use any image of the slide)

  

  Step 2 > now you can set the timing for the text of the legend (click here). Here I put it for only 3 seconds, so it will disappear after 3 seconds

  

  Step 3 > now click on 'Failure Type here text' and adjust the ignition in his properties as well

  

  By doin this failure of Type here text appears for the duration that you want and it will take the place of the legend text

  I hope that helps!

  Vishal

• Legend of failure and legends Hint

  When I record in Captivate 4 on Windows XP, the legend of failure or hint captions do not display upwards.  It also does not show my mouse movements.  I tried to change the settings and options, but nothing seems to work.  Any help is appreciated!

  Hi again

  When you click on Simulation software, you have a few options. Demonstration, evaluation and Simulation of training Simulation. Demo mode will only provide the movements of the mouse. Only Simulation modes offer the legends of suspicion. FMR will enable the registration of the mouse, but you can't later to change.

  In regards to the legends of the trick, SEE it only actually once that you have saved in simulation mode and reading in a preview or output has published. The indicator shows when you hover over the image map.

  Does that help?

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Problems become more problems... DISK BOOT FAILURE, INSERT THE FLOPPY DISK AND PRESS ENTER

  I recently had a question on my toolbar menu and begin to disappear.  While I was trying a number of different ideas through forums, I myself in another problem.  Now my computer boots but windows never start I just get a screen saying: "FAILURE of STARTUP DISK, INSERT the DISK AND press ENTER.  It worries me because my computer never came with a CD-ROM it was all preloaded when I bought.  Can anyone help, thanks

  Home premium Windows Vista, 64-bit operating system

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

  Original title: why Windows Media Center does not detect my DVD?

  I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

  "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

  my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

  I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

  scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

  rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

  No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

  automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

  that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

  and ASUS.

  I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

  Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.

• What should I do now? I have a boot failure of the disk (insert system disk). I inserted the disc and it says:

  Compaq sr5127cl vista 32 bit boot disk failure, insert system disk

  I inserted the disc system and got "No drive found" upwards cannot continue

  What should I do now?

  Datsuny wrote: Compaq sr5127cl vista 32 bit boot disk failure, insert system disk I inserted the disc system and got "no drive found" set up will continue what should I do now?

  Hello Datsuny, many times this error means that the hard drive has failed or the operating system on the hard disk is damaged.

  I would tend to think that the hard drive has failed.

• Is it possible to insert a video and have it automatically play when the topic is open?

  I use Robohelp 10. Is it possible to insert a video and have it automatically play when the topic is open?

  Not to worry - found the autostart definition in html code and it changed.