Inside the server can't ping remote vpn client
My simple vpn client can accumulate the tunnel vpn with my Office ASA5510 success and my vpn client can ping the internal server. But my internal server cannot ping the remote vpn client. Even the firewall vpn client windows is disable.
1. in-house server can ping Internet through ASA.
2 internal server cannot ping vpn client.
3 Vpn client can ping the internal server.
Why interal Server ping vpn client? ASA only does support vpn in direction to go?
Thank you.
Hello
Enable inspect ICMP, this should work for you.
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the icmp
inspect the icmp error
inspect the icmp
To configure the ICMP inspection engine, use the command of icmp inspection in class configuration mode. Class configuration mode is accessible from policy map configuration mode.
inspect the icmp
HTH
Sandy
Tags: Cisco Security
Similar Questions
-
iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard
I assume that you mean the keyboard built into the 'smart cover' - it must be in contact with the iPad.
A wireless keyboard Apple has been reported as working with an iPad Pro. Plug Apple for the new State of "magic keyboard" that it requires a Mac with os x 10.11 or later - he does not mention the iPads. Third-party Bluetooth keyboard should work.
-
Hi all
Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...
Thank you & best regardsAndyHi Andy,.
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
http://social.technet.Microsoft.com/forums/en/category/WindowsServerHope the helps of information.
-
IPsec remote VPN client 5.0.07 Cisco
Hello
I am setting up remote IPsec VPN using ASDM for ASA 5505.
can someone guide me for FOLLOWING;
1 step 6 for ASDM IPsec wizard: name of the cluster: what IP addresses I need to assign here.
my network has inside the IP 192.168.0.1 and outside IP 162.212.232.174
2. VPN client: what would be the IP host?
What is the password and username for authentication group?
Please advice or give me a link that can help me for this set to the top?
I need help with installation of VPN client both ASDM for IPsec Wizard wizard.
Thank you
SAP
Hello
Pool is the range of IP addresses for VPN clients (when connect you to your network). Use a different subnet of your internal networks. ex: 192.168.10.0 255.255.255.0
Host IP: your ASA 5505 public ip: 162.212.232.174
Group information - that you configure on ASA5505 and even he must be configured on the client.
See the link below (research online and you will find a lot of documentation).
http://www.databasemart.com/HOWTO/Cisco_VPN_Remote_Access_Setup_ASA5500.aspx
THX
MS
-
Remote VPN client and Telnet to ASA
Hi guys
I have an ASA connected to the Cisco 2821 router firewall.
I have the router ADSL and lease line connected.
All my traffic for web ports etc. of ADSL ftp and smtp pop3, telnet etc is going to rental online.
My questions as follows:
I am unable to telnet to ASA outside Interface although its configuered.
Unable to connect my remote VPN Client, there is no package debug crypto isakmp, I know that I have a nat that is my before router device my asa, I owe not nat port 4500 and esp more there, but how his confusion.
I'm ataching configuration.
Concerning
It looks like a config issue. Possibly need debug output "debug crypto isa 127".
You may need remove the command «LOCAL authority-server-group»
NAT-traversal is enabled by default on the ASA 8.x version. So you don't have to worry about NAT device in the middle.
-
Can not handle the ASA inside the interface of Site to Site VPN
Hi all
I was deploying new site to site between ASA 8.0 (HQ) and ASA 8.4 (branch). Everything works fine but I have a problem on the ASA-reach remote that I can't manage branch ASA with inside the interface IP address.
My setup on remote ASA
management-access inside
ICMP allow any inside
SSH 0.0.0.0 0.0.0.0 inside
SNMP-server host inside 10.0.1.101 communitry test-snmp version 2 c
My Test
-ping of the AC for inside the interface of remote ASA
- Client time-out see demand
- When debug icmp on ASA remote then ASA show only ICMP request to HQ no response back from remote ASA
I'm not sure whether it's a bug on ASA 8.4 or not because I can manage a remote other ASA what version 8.0 software HQ
Thanks in advance
Do not know what 8.4 version you use, but it is broken in the 8.4 (2), I stumbled upon the upgrade from same problem. SSH and ASDM will not connect through a VPN L2L interface inside. This worked well in 8.4 (1).
-
ASA 5520: Remote VPN Clients cannot ping LAN, Internet
I've set up a few of them in my time, but I am confused with this one. Can I establish connect via VPN tunnel but I can't ping or go on the internet. I searched the forum for similar and found a little issues, but none of the fixes seem to match. I noticed a strange thing is when I run ipconfig/all of the vpn client, the IP address that has been leased over the Pool of the VPN is also the default gateway!
I have attached the config. Help, please.
Thank you!
Exemption of NAT ACL has not yet been applied.
NAT (inside) 0-list of access Inside_nat0_outbound
In addition, you have not split tunnel, not sure you were using internet ASA for the vpn client internet browsing.
You can also enable icmp inspection if you test in scathing:
Policy-map global_policy
class inspection_defaultinspect the icmp
Hope that helps.
-
Hello
just a quick,
TOPOLOGY
ASA isps1 - 197.1.1.1 - outside
ASA ISP2 - 196.1.1.1 - backup
LAN IP - 192.168.202.100 - inside
I have configured Tunnel on the interfaces (external and backup), but is to link both legs public to serve a thare as redundancy for vpn users and users of the vpn tunnel leave pointing inside IP whenever they want to establish vpn sssion, we want it to be one, so if an interface fails vpn users will not know , but he will try the second for the connection. instead of creating the profile for the two outside of the leg on the vpn client.
is this possible?
Hi Rammany.
In your case, you have only an ASA that connects with 2 ISP in another segment IP... 196.x.x.x (Link1) & 197.x.x.x (Link2). What your condition is you want to have the VPN client who must be consulted with backup. If 196.x.x.x link fails, it should automatically take 197.x.x.x link. That too we should not have the config set in the VPN client backup server. You don have the possibility of having standby active also in asa single.
I think n so it will work with your current design.
This option is if your VPN client supports host name resolution (DNS). You can have the VPN created for both the public IP address share the same host name keeping the bond as the primary address 1 and 2 a secondary address. It will work alone.
Hope someother experts in our forum can help you with that.
-
Remote vpn client can't access outside networks
I configured a remote vpn ASA 5510 the wizard remote vpn. Users are able to get the vpn connection and access the internal network; but IMPOSSIBLE to
access the outside network. (For the internal network, I want to talk about network behind the vpn to ASA, outside networks refers to society outside the ASA).
In short, the external network of the company has default route to the ROUTER1 points. The ROUTER1 has road for access network and a default route to the internet. The ASA has a default route to the ROUTER1 points. the ROUTER1 also has a route to the address of the user remote vpn refers to the ASA.
Hope it wise.
But I don't know if my nat statement is correct. below is my statement of nat, is there something obvious lack? There is no translation network here, routable internet addresses.
NAT (inside) 0-list of access inside_nat0_outbound
public static 111.1.0.0 (Interior, exterior) 111.1.0.0 netmask 255.255.255.0
public static 111.1.1.0 (Interior, exterior) 111.1.1.0 netmask 255.255.255.0
public static 111.1.2.0 (Interior, exterior) 111.1.2.0 netmask 255.255.255.0
networks outside the company (111.1.3.0/24; 111.1.4.0/24)
|
|
the user remote vpn <-------------->internet <--------------------->ROUTER1 - ASA - Cat6509 - inside the network
Any suggestion is appreciated.
Thank you
have you enabled "same-security-traffic intra-interface.
--------------------->--------------> -
The remote VPN Clients and Internet access
I apologize in advance if this question has already been addressed. I am currently using a PIX Firewall Version 6.1 520 (2) running. I have several remote users that VPN for the PIX. Once the VPN tunnel is started, they are more able to connect to internet from their local computers. Is there a configuation on the PIX that allows remote users to have access to the internet when you are connected to the PIX.
TIA,
Jeff Gulick
The Pix does not allow traffic enter and exit on the same interface. Therefore, a VPN user cannot access the Internet through the tunnel. If you use the Cisco client, enable tunneling split so that all traffic through the tunnel.
If you use PPTP, you can turn off the option that makes the remote network, the default gateway. However, local routes should be added to these clients when they connect.
Or you can use an additional interface on the firewall. One that puts an end to VPN tunnels and another providing for Internet connectivity. In this way the traffic is not enter/leave on the same interface.
Of course, it is preferable if the customer Internet traffic does not go through the tunnel. It wastes your bandwidth and has security problems as well. I suggest you use the client to Cisco and the split tunneling.
-
gfsh start the server to perform a remote debugging
Hello
I'm trying to start a server I can do do remote debugging of function, here is my command
gfsh start server - name = myserver - dir = mydir - locators = localhost [41111] - server-port = 41122--proprietes-file=gemfire.properties--cache-xml-file=servercache.xml
J-= - agentlib:jdwp = transport = dt_socket, address = localhost:8000, server = y, suspend = y
When I run this script I get
ERROR: Server JDWP-no-dt_socket transport must have an address of connection specified through the "address =" option
ERROR: Invalid Option of JDWP:-agentlib: jdwp = transport = dt_socket
What am I I miss, is it possible to do
I used to do
Cacheserver start locators = localhost [41111] - server-port = 41122 - J-DgemfirePropertyFile =... GemFire.Properties - dir = server1
-J - Xdebug - J - runjdwp:transport = dt_socket, address = 8000, server = y, suspend = n
Used to work properly,
You should be able to do this:
--J =-Xdebug - J =------""-Xrunjdwp:transport = dt_socket, server = y, suspend = n, address = 5005\ ""
Note the double quotes escaped.
-Jens
-
inside the host does not ping external host in transparent mode
Hi all I need urgent help on this pls I have host on ip add 1.1.1.2/24 connected inside interface of the pix with ios 7.0 in transparent mode. and the external interface of the pix connected to a router IP 1.1.1.1/24.i enabled icmp inspection.i can see the router arp entry into the host and the host arp entry in the mac address router.both are well learned by the pix. no traffic flow form the host to the router. There is no access on the pix of pix.the list does not create an arp entry in the stange very pix. I tried to manuaaly add the entry:
ARP in 1.1.1.2 0011.d80d.f6ac it gives an error <1.1.1.2>not allowed. network address I do not get it .my question is why the pix don't is not create entry arp. what could be the problem. could someone pls help me with this thanks pls.
Assane
Lol this is not as you mentioned. I'll explain the communication all in detail. I hope this helps.
Assumptions:
PIX configured to L2, with outside as 0 and inside as 100. insidehost on inside the network and external network configured outsidehost.
scenario 1
==========
If pix is not configured with the IP address, all IP packets are dropped and syslog Id 322004: no management IP address configured for transparent
Firewall is saved. So lets see how communication works on L2
outsidehost tries to communicate with insidehost. ARP request is from outsidehost and is sent through dissemination and it is received by PIX and sent to the inside network, without change.
Return of InsideHost and the response is sent through to the outsidehost. When you see the arp on the outsidehost and the insidehost entries you will find the corresponding arp entries.
PIX will forward arp request/reply.
You can give the command "local host" and you won't see any entries created on the box.
2nd scenario
==========
An ip address is configured on pix and insidehost starts communication with the outsidehost. Communication is from top to bottom and will allow pix.
No change in the behavior of the ARP. Exactly as mentioned in scenario 1.
Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from insidehost to outsidehost.
Connection between outsidehost and insidehost is denied because there is no access list to allow traffic from low to high.
You can give the command "local host" and you will see the entrance to insidehost, outsidehost.
3rd scenario
=============
An ip address is configured, created in order to allow the circulation of outsidehost insidehost and applied to the external interface of access list access list.
No change in the behavior of the ARP. Exactly as mentioned in scenario 1.
Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from outsidehost to insidehost.
Access list being present to allow the traffic, the connection is allowed and entry is created in the box.
Hope that the foregoing erases the entire communication L2 and the communication of different security levels.
I hope this helps.
1.1.1.2> -
See connection to the server can be installed on the server vCenter Server?
Very simple question.
4.5 View connection server can be installed on the same virtual machine as vCenter 4.1?
I know that is not optimal. He would only be in environments very small business (less than 10 users) where to buy two servers for VDI OS licenses would be unaffordable.
Thank you.
No, they cannot be installed on the same machine.
____________
blog.eeg3.net | Useful links related to VMware
If you have found this device or any other post useful, please consider the use of buttons useful/correct for award points.
-
Can't access secondary VPN client subnet
Please can someone help with the following: I have an ASA 5510 performer v8.4 9 (3) and setup a remote user VPN using the v5.0.07.0410 of customer Cisco VPN which is working apart from the fact that I can not access resources on secondary subnet.
The configuration is the following:
ASA inside the interface on 192.168.10.240
VPN clients on 192.168.254.x
I can access reources on the 192.168.10 subnet but not no matter what other subnets internally, I need to specifically allow access to the 192.168.20 subnet, but I cannot figure out how to do advise please, the config is lower to: -.
Output from the command: 'show startup-config '.
!
ASA 3,0000 Version 9
!
blank host name
domain nameactivate the encrypted password
encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif outside
security-level 0
IP 255.255.255.224
!
interface Ethernet0/1
nameif inside
security-level 100
IP 192.168.10.240 255.255.255.0
!
interface Ethernet0/2
nameif DMZ
security-level 50
IP 10.10.10.253 255.255.255.0
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
boot system Disk0: / asa843-9 - k8.bin
boot system Disk0: / asa823 - k8.bin
passive FTP mode
clock timezone GMT/UTC 0
summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
Server name 194.168.4.123
Server name 194.168.8.123
domain nifcoeu.com
network object obj - 192.168.0.0
192.168.0.0 subnet 255.255.255.0
network object obj - 192.168.5.0
192.168.5.0 subnet 255.255.255.0
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.0
network object obj - 192.168.100.0
255.255.255.0 subnet 192.168.100.0
network object obj - 192.168.254.0
192.168.254.0 subnet 255.255.255.0
network object obj - 192.168.20.1
Host 192.168.20.1
network obj_any object
subnet 0.0.0.0 0.0.0.0
network obj_any-01 object
subnet 0.0.0.0 0.0.0.0
network object obj - 0.0.0.0
host 0.0.0.0
object network obj_any-02
subnet 0.0.0.0 0.0.0.0
network object obj - 10.10.10.1
host 10.10.10.1
obj_any-03 network object
subnet 0.0.0.0 0.0.0.0
object network obj_any-04
subnet 0.0.0.0 0.0.0.0
object network obj_any-05
subnet 0.0.0.0 0.0.0.0
network of the NS1000_EXT object
Home 80.4.146.133
network of the NS1000_INT object
Host 192.168.20.1
network of the SIP_REGISTRAR object
Home 83.245.6.81
service of the SIP_INIT_TCP object
SIP, service tcp destination eq
service of the SIP_INIT_UDP object
SIP, service udp destination eq
network of the NS1000_DSP object
192.168.20.2 home
network of the SIP_VOICE_CHANNEL object
Home 83.245.6.82
service of the DSP_UDP object
destination udp 6000 40000 service range
service of the DSP_TCP object
destination tcp 6000 40000 service range
network 20_range_subnet object
subnet 192.168.20.0 255.255.255.0
subnet of voice Description
network 25_range_Subnet object
255.255.255.0 subnet 192.168.25.0
PC devices customer Description VLAN 25
the ISP_NAT object-group network
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service SIP_INIT tcp - udp
port-object eq sip
object-group service DSP_TCP_UDP tcp - udp
6000-40000 object-port Beach
permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.254.0 255.255.255.0
inside_nat0_outbound list extended access allowed object 20_range_subnet 192.168.254.0 ip 255.255.255.0
standard VPN_splitTunnelAcl-Remote Access-list allowed 192.168.10.0 255.255.255.0
standard VPN_splitTunnelAcl-Remote Access-list allowed 192.168.20.0 255.255.255.0
access-list 100 extended allow object object-group TCPUDP object SIP_REGISTRAR NS1000_INT SIP_INIT object-group
access-list 100 extended allow object object-group TCPUDP object SIP_VOICE_CHANNEL NS1000_DSP DSP_TCP_UDP object-group
access-list extended 100 permit ip 62.255.171.0 255.255.255.224 all
access-list 100 extended allow icmp from any echo-answer idle
access-list extended 100 permit icmp any one has exceeded the idle time
access-list extended 100 allow all unreachable icmp inactive
access-list extended 100 permit tcp any host 10.10.10.1 eq ftp
access-list extended 100 permit tcp any host 10.10.10.1 eq ftp - data
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
192.168.254.1 mask - local 192.168.254.254 pool Pool VPN IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 647.bin
enable ASDM history
ARP timeout 14400
NAT (inside, all) source static obj - 192.168.0.0 obj - 192.168.0.0 destination static obj - 192.168.5.0 obj - 192.168.5.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.100.0 obj - 192.168.100.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.254.0 obj - 192.168.254.0 no-proxy-arp-search to itinerary
NAT (exterior, Interior) static source SIP_REGISTRAR destination interface static NS1000_INT service SIP_INIT_TCP SIP_INIT_TCP SIP_REGISTRAR
NAT (exterior, Interior) static source SIP_REGISTRAR destination interface static NS1000_INT service SIP_INIT_UDP SIP_INIT_UDP SIP_REGISTRAR
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
network obj_any-01 object
NAT (inside, outside) dynamic obj - 0.0.0.0
object network obj_any-02
NAT (inside DMZ) dynamic obj - 0.0.0.0
network object obj - 10.10.10.1
NAT (DMZ, outside) static 80.4.146.134
obj_any-03 network object
NAT (DMZ, outside) dynamic obj - 0.0.0.0
object network obj_any-04
NAT (management, outside) dynamic obj - 0.0.0.0
object network obj_any-05
NAT (management, DMZ) dynamic obj - 0.0.0.0
Access-group 100 in external interface
Route outside 0.0.0.0 0.0.0.0 80.4.146.129 1
Route inside 192.168.20.0 255.255.255.0 192.168.10.254 1
Route inside 192.168.25.0 255.255.255.0 192.168.10.254 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.10.0 255.255.255.0 inside
http 192.168.25.0 255.255.255.0 inside
http 62.255.171.0 255.255.255.224 outside
http 192.168.254.0 255.255.255.0 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN =Configure CRL
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
string encryption ca ASDM_TrustPoint0 certificates
certificate 2f0e024dquit smoking
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491quit smoking
crypto isakmp identity address
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.1.0 255.255.255.0 management
Telnet timeout 5
SSH 62.255.171.0 255.255.255.224 outside
SSH 192.168.254.0 255.255.255.0 outside
SSH 192.168.10.0 255.255.255.0 inside
SSH 192.168.25.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
Console timeout 0
VPN-sessiondb max-other-vpn-limit 250
VPN-sessiondb 2 max-anyconnect-premium-or-essentials-limit
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
prefer NTP server 192.168.10.6 source inside
WebVPN
internal group to distance-VPN strategy
attributes of group to VPN remote policy
value of server WINS 192.168.10.21 192.168.10.22
value of server DNS 192.168.10.21 192.168.10.22
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value Remote-VPN_splitTunnelAcl
value by default-field
username empty empty encrypted password privilege 0
user name empty attributes
VPN-VPN-remote group policy
username empty encrypted password privilege 0
user name empty attributes
VPN-VPN-remote group policy
type tunnel-group to distance-VPN remote access
global-tunnel-group attributes to remote VPN
address pool VPN-pool
strategy of group - by default - remote-VPN
remote VPN-ipsec-attributes tunnel-group
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the tftp
Review the ip options
inspect the sip
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
contact-email-addrProfile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:b8263c5aa7a6a4d9cb08368c042ea236Hi Simon,.
Please try this and let me know.
NAT (inside, all) source 20_range_subnet destination 20_range_subnet static static obj - 192.168.254.0 obj - 192.168.254.0
Let me know, if this can help.
Thank you
Rizwan James
-
Certificate self-signed for remote VPN CLIENT access
Hi people,
I am trying to achieve two-factor authentication, first with RADIUS & 2nd with self-signed certificate. If I generated of self-signed certificate & trying to import this certificate but error 39 that occur. Only obstacle that authenticate with certificate. I saw some documents for separate setting certifcate servers (CA) & then to import in the clients but I m curious about a certificate automatically generated can be used to authenticate the remote access client.
ASA additional server failover mode is Local CA is not supported. Is there a way to support local CA.
Thank you
Are you talking about using self-signed client certificates? I guess that it will not work. At least it is not scalable. You must use an internal CA for this task. As the local certification authority cannot be used with failover, you can take a Windows Server 2 k 3 or 2 k 8. Another option is to use a router IOS as CA-server. But what take something else as a second factor? I'm a big fan of the use of smartphones with the www.duosecurity.com service.
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni
Maybe you are looking for
-
Too high temperature on Satellite Pro L20?
Hey,. last night, when the temperature of the 'Temp 1 meaning' of game reaches 101 ° C / 210 ° F. Is - this too high? My Toshiba Satellite Pro L20 is now almost 5 years old. The fan works and the Bios for the cooling setting is set to 'Performance '.
-
Random photos still added to the calendar go black?
Some of my photos from iPhoto added to FCPX timeline go black. I searched and there mention there of wireframe the cause but I don't think that's the problem. Any help much appreciated. Thank you
-
Driver for the Atheros QCWB335 Qualcomm model
Hello I just bought a 15-D002TX HP laptop and I installed windows 8.1 (64-bit) on this subject. My WiFi adapter is qualcomm atheros QCWB335. I need the link to download the driver for wireless lan and bluetooth.
-
Volume control icon disappeared
My office is running vista and a few days ago the icon in the notification area white volume control has disappeared. When I go into the properties of the taskbar to show once again, the volume option is grayed out. Can anyone suggest a way to recove
-
I am looking to buy a laptop of lenovo, again I absolutely despise the new lenovo products and the largest were t61 I have to get a new one it would be great if I could buy one in the range $100 - $150