Inspect dashboard fails to find a target

I all connected my android device and loaded the web application, but weinre is unable to connect - the title says target not connected. If I inspect the weinre window there are errors in the console:

Could not load the resource http://debug.edgeinspect.adobe.com/client/Popover.js

Eception TypeError: undefined is not a NetworkPanel.js:73 function

Eception TypeError: Can't call method 'push' of undefined inspector.js:57

I tried to clear the cache of Chrome and inspect the dashboard app but it did not help. In addition, this file (Popover.js) does very well in Chrome. What can be the problem?

Mac OS X 10.7.5, Chrome 29.0.1547.76, 4.3 Android on Nexus 4

Thanks for your reply. The problem was with the AdBlock Plus extension. After this weinre has been able to connect and to present to the Inspector. Apparently, the Popover.js is a name of current file used by advertising executives.

Tags: Edge Inspect

Similar Questions

  • Captivate 8: inspect dashboard do not find devices

    With the help of Windows desktop running Windows 7 Ultimate and 8 Captivate and try to get a glimpse on board inspection. I have a laptop MacBook Pro starts the Mac operating system and an iPhone, which are connected to my network. I know that they are connected to my network because I am able to navigate and receive emails on these devices.

    The plug to inspect the edge is installed in Chrome, but when I click the icon Edge inspect chrome, I get a "Waiting for a connection...". "message that doesn't go away, and the MacBook Pro and iPhone devices never appear.

    inspect.gif

    There must be a place to specify what devices I want to listen to samples. What should I do to get a glimpse of my iPhone edge inspect at least? (Once I know how to do this, I would also like to get an overview of the project on my iPad.)

    I watched the video of Dr. Pooja where it explains how to use Edge inspect. His instructions were to a high standard and lack detail important it makes me wonder if she ever used dashboard inspect with Captivate itself.

    I finally found this

    Adobe® Edge inspect Installation Guide

    which explains in detail what needs to be done.

    After following the instructions in the Setup Guide inspect dashboard, I could finally see my Captivate project on my iPhone.

  • restore failed - cannot find image path path:c:\images_tmp_dir\install.wim HELP my old crushed drive

    my old drive crashed bought a new and the 5 CD to recover at acer until I installed the cd, that I could get in the bios. Now nothing and I still get the evertime following error, he manages at the end of the installation of recovery disk 3

    restore failed - cannot find path:c:\images_tmp_dir\install.wim image path

    I used Rufus and yes I changed my BIOS, but I had read I need to change the format of my flash to fat64 which I just did, now I'm a new attempt to restore the ISO.  I'll let you know if it works.

  • Windows Update Standalone Installer: error 0x80073afc the resource loader failed to find MUI file. Windows 7 64 bit

    I have a desktop PC running Windows 7 Professional 64-bit.  There is an update which is unable to complete, causing the PC to undo changes to before the update.  It usually takes an extreme amount of time, and of course, I've always updates installed.  I tried to use the Microsoft Fixit tool, which came back with error 0 x 80070057.  I saw in a community forum that I could try the tool of microsoft SURT, but after the long scan he came back with the following error:

    Windows Update Standalone install

    Setup has encountered an error: 0x80073afc

    The resource loader failed to find MUI file.

    Please help.

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the question and your efforts to resolve.

    This problem can occur because of corrupted Windows Update files and components.

    I suggest you to reset the Windows update components and check if that helps.
    Refer to this article:
    How to reset the Windows Update components?
    https://support.Microsoft.com/en-us/KB/971058

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • HA error "an error has occurred while setting up the HA Agent on the host" & "Failed to find host name" on the ESX host

    I had to reload of the two ESX 3.0.2 Server I have here.

    Now the I get a HA error "an error has occurred while setting up the HA Agent on the host" when try to reconfigure HA.

    I note also that the same host if console type 'hostname - a' I get "Failed to find host name"

    I still seem to migrate virtual machines, but clearly something is wrong somewhere, there DNS config file I can check, I already check ed the hosts file and I can ping everything using long DNS name and short host name.

    Or maybe there is dns service can I restart?

    Thank you

    If you are running ESX 3.0.x check/etc/FT_HOSTS

    You can also check http://kb.vmware.com/kb/1003691

  • 'Find all Targets.vi' blocks 2009 development environment

    Hi people,

    This is a first for me - 2009 v9.0f3 running and have problems with the above vi (included as part of the example of "Replication of system"). I used this VI for a while now and never had this problem.

    The local NIC 10/100 the value by default, but if static DHCP DHCP not available (172.16.1.1/255.255.0.0).

    PSC-2010 is static to 172.16.1.2

    Link/ping find between the target and the computer host.

    Target is running RT v8.5.1, FP VI Manager 6.0.1 / PS drivers 6.0.0 and variable customer support for LV RT.

    Crashes when:

    -host to PSC-2010 PC connection is OK

    AND

    -' Find not only configured "bool terminal is set to (False)

    Won't crash if:

    -computer host is connected to the network 'coorperate' and a IP through DHCP (no target address). Or bool value.

    -host to PSC-2010 PC connection is OK

    AND

    -' Find not only configured "bool terminal is set to (true)

    Crash is difficult - no "program has stopped responding", all the windows just left LabVIEW.

    Recovery comes into play on the next launch of LV, but no error report.

    Any thoughts? Don't know where to start, another that * perhaps * an another PSC-2010.

    Kind regards

    Jamie

    After that I realized that it was actually a DevZone Toolbox, I re-uploaded, re-placed in the \user.lib folder, and everything's fine.

    Thank you

    Jamie

  • After update of Windows 7 with the last KB 'Reliability' updates, wouldn't Boot: Boot mgr failed, cannot find the OS loader

    After that update of Windows 7 with 5 ~ updates which mainly provided increased reliability, these KBs wound up loader of Windows BOOT OS/corrupt the rupture.

    Root cause found:
    ----------------------
    Boot Manager cannot find the OS loader

    Repair action: repair of files
    Result: failed. Error code = 0xa<---- next="" repair,="" this="" changes="" to="">
    Time taken = 4206 ms

    Repair action: repair store boot configuration data
    Result: Has no = 0 error code x 490
    Time taken = 221 ms

    Repair action: System Restore
    Result: Completed successfully. Error code = 0 x 0
    Setting time = ms 44444

    How to search through my hard drive to find updates KB which is the origin of my computer to lose its bootloader/OS and not starting?  What KB update is initially the charger operating system not found when everything worked very well, before these 5 updates.

    What are the solutions?

    Try the Forum updated; It includes questions of XP, Vista and Windows 7 update:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Data backup pump failed and find the reason

    OS - Windows server 2012

    version - 11.2.0.1.0

    Server: production server

    Every day we take the backup data pump expdp and yesterday he got failed with the following error

    Start "AWSCOMMONMASTER". "" FULLEXPJOB18JUN15_090003 ":

    Current estimate using STATISTICS...

    Treatment of DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA object type

    ORA-39126: worker unexpected fatal worker error of $ MAIN. DO_STATISTICS_ESTIMATE [TABLE_DATA: "DAILYRAWMAH".] ["" S07130131 "]

    SELECT COL, rowcnt, avgrln OF SYS. KU$ _TABLE_EST_VIEW WHERE object_schema =: 1 AND object_name =: AND 2: 3 IS NULL AND: 4 IS NULL

    ORA-01403: no data found

    ORA-06512: at "SYS." DBMS_SYS_ERROR', line 105

    ORA-06512: at "SYS." "MAIN$ WORKER", line 8171

    -PL/SQL call stack-

    the line object

    serial number of handle

    00000002F8D46620 18990 SYS package body. MAIN$ WORKER

    00000002F8D46620 8192 SYS package body. MAIN$ WORKER

    00000002F8D46620 8599 SYS package body. MAIN$ WORKER

    00000002F8D46620 7734 SYS package body. MAIN$ WORKER

    00000002F8D46620 12616 SYS package body. MAIN$ WORKER

    00000002F8D46620 2434 SYS package body. MAIN$ WORKER

    00000002F8D46620 8847 SYS package body. MAIN$ WORKER

    00000002F8D46620 1649 SYS package body. MAIN$ WORKER

    00000002F114F380 anonymous block 2

    Current estimate using STATISTICS...

    Treatment of DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA object type

    ORA-39126: worker unexpected fatal worker error of $ MAIN. DO_STATISTICS_ESTIMATE [TABLE_DATA: "DAILYRAWTN".] ["" S07130131 "]

    SELECT COL, rowcnt, avgrln OF SYS. KU$ _TABLE_EST_VIEW WHERE object_schema =: 1 AND object_name =: AND 2: 3 IS NULL AND: 4 IS NULL

    ORA-01403: no data found

    ORA-06512: at "SYS." DBMS_SYS_ERROR', line 105

    ORA-06512: at "SYS." "MAIN$ WORKER", line 8171

    -PL/SQL call stack-

    the line object

    serial number of handle

    00000002F8D46620 18990 SYS package body. MAIN$ WORKER

    00000002F8D46620 8192 SYS package body. MAIN$ WORKER

    00000002F8D46620 8599 SYS package body. MAIN$ WORKER

    00000002F8D46620 7734 SYS package body. MAIN$ WORKER

    00000002F8D46620 12616 SYS package body. MAIN$ WORKER

    00000002F8D46620 2434 SYS package body. MAIN$ WORKER

    00000002F8D46620 8847 SYS package body. MAIN$ WORKER

    00000002F8D46620 1649 SYS package body. MAIN$ WORKER

    00000002F114F380 anonymous block 2

    Work "AWSCOMMONMASTER". "' FULLEXPJOB18JUN15_090003 ' stopped because of the mistake 22:21:19

    According to the above error I doubt two,.

    (1) every day I used to take expdp successfully why he failed yesterday only when everything is correct, my doubt is that one manually stop or revoke any privilege that associated with exports from above mentioned user called AWSCOMMONMASTER.

    If Yes, how can I find which revoked the privileges and what privileges revoked and when, how I do this. I got Toad tool

    (2) if not above mentioned point of view then, what is the error how can I identify. Not my backp work will begin today and I need to make success. Thank you in advance for your golden time.

    Hello

    There is no content = option there.

    Thin in this topic you have logically - 100 tables to retrieve the say and the process works through the list, in another session that someone drops a table - when the export process gets what he says "he has no table" - and he raises an error - the other 99 will work ok just this one will be failure.

    In your case, with incredible timing, the table has been deleted while the process was the phase of metadata and you got the weird error thrown - but the general theory is the same.

    Kind regards

    Rich

  • Failed to retrieve the target data system for FDM 11.1.2.3 HFM adapter

    Hello gurus,

    : Server 1 HFM

    : Server 2 FDM

    Server 3: Database server

    1. I have managed to create an application of FDM using FDM web client.

    2. later I imported the FDM adapter - FM11X-G6-C in the Workbench of FDM and also saved the file fdmFM11XG6C.dll successfully.

    3. We then defined the Machine profile and also specified with the custom sizes available in our HFM application.

    4. we have then configured the adapter with success.

    5. we get the following question when browse us the metadata -> control tables

    Cannot retrieve the data on the target system

    6 log has the following entry

    Error:

    Code...-2147220966

    Description... System.Runtime.InteropServices.COMException (0x8004021A):

    {0F677127-F815-4495-8290-AF2899C9482F}1-2147220966010/16/2013 07:41:57< servername FDM >CHsxClient.cpp282011.1.2.3.000.4045Unknown error

    at HSXCLIENTLib.HsxClientClass.OpenApplication (String bstrClusterName, String bstrProduct, String bstrApp, ppIUnkServer, & object object & ppIUnkSession)

    at fdmFM11XG6C.clsHFMadapter.fConnect)

    Process... clsFMAdapter.fConnect

    Component... D:\FM11X-G6-C_1002\AdapterComponents\fdmFM11XG6C\fdmFM11XG6C.dll

    Version... 1116

    Identification:

    ... The admin user

    ... Computer name < servername FDM >

    Connection of FINANCIAL MANAGEMENT:

    Name of the application...

    Name of the cluster...

    Field...

    Connect status... No open connection

    * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:57] *.

    -------------------------------------------------------------

    ERROR:

    Code............................................. 10054

    Description... Adapter function [fConnect] failed.

    Process... clsBlockProcessor.DimensionList

    The component... upsWBlockProcessorDM

    Version.......................................... 1112

    Thread........................................... 80304

    IDENTIFICATION:

    User............................................. admin

    ... Computer name < servername FDM >

    Name of the application... < name of application of FDM >

    Client App....................................... WebClient

    CONNECTION:

    Provider......................................... SQLOLEDB

    Server data... < database server name >

    Name of database < database name >

    Trust connect... Fake

    Connect status... Open connection

    GLOBALS:

    Location......................................... Sample

    Location ID... 748

    Location Seg... 2

    Category......................................... WLCat

    ID of the category... 12

    Period........................................... Oct - 2013

    Period ID........................................ 10/31/2013

    POV Local........................................ Fake

    Language......................................... 1033

    User Level....................................... 1

    All Partitions... True

    Is Auditor....................................... Fake

    * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:58] *.

    -------------------------------------------------------------

    ERROR:

    Code...-2146818234

    Description... Adapter function [fConnect] failed.

    Procedure........................................ ObjScriptReturnMarshaler.GetDimensionList

    Any help will be much appreciated.

    Thank you all for your help...

    It was a problem with the Machine profile configuration, where I had updated the username and password and it had to remain a Virgin.

    Keep the username blank password in the configuration of the machine profile has solved the problem.

  • CSV to Oracle - (integration) fails on ORACLE connection target

    Hello

    I'm trying to load data from a csv file into Oracle db by ODI.

    Here are the steps I followed:

    1 created the physical schema FILE

    1 created the physical schema and an Oracle data server in the physical Architecture

    2 - creation and related to logical schemas

    3 created the corresponding data models and the shops

    wheat to display the contents of CSV data and target in ODI table.

    4 - creating the interface, add csv as source and oracle table as the target

    5 used "LKM File to SQL" and "IKM SQL append" (FLOW_CONTROL is false)

    When I run the interface, the session starts while I'm getting the wrror following in operator:

    ODI-1228: ARIBA_G1 (integration) task fails on ORACLE DEV_DW connection target.

    Caused by: java.sql.SQLException: SQL92 no token taken in charge at position: 116

    at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java:1319)

    at oracle.jdbc.driver.OracleSql.parse(OracleSql.java:1190)

    at oracle.jdbc.driver.OracleSql.getSql(OracleSql.java:341)

    at oracle.jdbc.driver.OracleSql.getSqlBytes(OracleSql.java:649)

    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)

    at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)

    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)

    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)

    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)

    at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)

    at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)

    at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)

    at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)

    at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)

    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)

    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)

    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)

    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)

    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)

    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)

    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)

    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)

    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)

    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)

    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)

    to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

    at java.lang.Thread.run(Thread.java:662)

    This is the section of Code:

    BeanShell script error: source file: online assessment: "if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert int... ": Typed variable declaration: error in calling the method: getDataSetMin() method not found in class 'com.sunopsis.dwg.snpreference.SnpReferenceInterne': line: 25: in file: online assessment:" if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert int... (": odiRef .getDataSetMin)
    Info OSB: insert new lines to the line: column 0: columnNo
    If (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert into\t");
    out. Print (odiRef.GetTable ("L", "TARG_NAME", "A"));
    out. Print ("\n (\n\tclick");
    out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
    out. Print ("\n\tclick");
    out. Print (odiRef.getColList ("," "[column]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
    out. Print ("\n") \nselect\t");
    out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
    out. Print ("\n\tclick");
    out. Print (odiRef.getColList (","[EXPRESSION]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
    out. Print ("\nfrom\t");
    out. Print (odiRef.GetTable ("L", "INT_NAME", "A"));
    out. Print ("\n");
    } else {out.print ("\ninsert into\t");
    out. Print (odiRef.GetTable ("L", "TARG_NAME", "A"));
    out. Print ("\n (\n\tclick");
    out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
    out. Print ("\n\tclick");
    out. Print (odiRef.getColList ("," "[column]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
    out. Print ("\n") \n\nselect\n ");
    out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
    out. Print ("\n");
    out. Print (odiRef.getColList (","[EXPRESSION]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
    out. Print ("\nFROM (\t\n");
    for (int i = odiRef.getDataSetMin (); i < = odiRef.getDataSetMax (); i ++) {out.print ("\n");
    out. Print (odiRef.getDataSet (i, "Operator"));
    out. Print ("\nselect \t");
    out. Print (odiRef.getPop ("DISTINCT_ROWS"));
    out. Print ("\n\tclick");
    out. Print (odiRef.getColList (i,"", "[EXPRESSION] [column]", ', \\n\\t ', ' ', '((INS and!)) (("(TRG) and REW) '));
    out. Print ("\nfrom\t");
    out. Print (odiRef.getFrom (i));
    out. Print ("\nwhere\t");
    If (odiRef.getDataSet (i, "HAS_JRN").equals("1")) {out.print ("\n\tJRN_FLAG <>has ' \t");}
    } else {out.print("\t(1=1)\t");}
    } out.print ("\n");
    out. Print (odiRef.getJoin (i));
    out. Print ("\n");
    out. Print (odiRef.GetFilter (i));
    out. Print ("\n");
    out. Print (odiRef.getJrnFilter (i));
    out. Print ("\n");
    out. Print (odiRef.getGrpBy (i));
    out. Print ("\n");
    out. Print (odiRef.getHaving (i));
    out. Print ("\n");
    } out.print ("\n)"); "
    out. Print (odiRef.GetInfo ("DEST_TAB_ALIAS_WORD"));
    out. Print ("ODI_GET_FROM\n\n");
    } out.print ("\n");

    ORIGINAL TEXT *.
    < % if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {% >}
    Insert into < % = odiRef.getTable ("L", "TARG_NAME", "A") % >
    (
    < % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
    < % = odiRef.getColList ("," "[column]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW) ") % >
    )
    Select < % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
    < % = odiRef.getColList (","[EXPRESSION]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW)") % >
    < % = odiRef.getTable ("L", "INT_NAME", "A") % >
    < %} else {% >}
    Insert into < % = odiRef.getTable ("L", "TARG_NAME", "A") % >
    (
    < % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
    < % = odiRef.getColList ("," "[column]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW) ") % >
    )

    Select
    < % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
    < % = odiRef.getColList (","[EXPRESSION]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW)") % >
    DE)
    < % for (int i = odiRef.getDataSetMin (); i < = odiRef.getDataSetMax (); i ++) {% >}
    < %=odiRef.getDataSet (i, "Operator") % >
    Select < % = odiRef.getPop ("DISTINCT_ROWS") % >
    < %=odiRef.getColList (i,"", "[EXPRESSION] [column]", ', \n\tclick ', ' ', '((INS and!) ("(TRG) and REW)") % >
    < % = odiRef.getFrom (i) % >
    where < % if (odiRef.getDataSet (i, "HAS_JRN").equals("1")) {% >}
    JRN_FLAG <>would be "< other %} {% > (1 = 1) < %} % >}"
    < % = odiRef.getJoin (i) % >
    < % = odiRef.getFilter (i) % >
    < % = odiRef.getJrnFilter (i) % >
    < % = odiRef.getGrpBy (i) % >
    < % = odiRef.getHaving (i) % >
    < %} % >
    ) < % = OdiRef.getInfo ("DEST_TAB_ALIAS_WORD") % > ODI_GET_FROM

    < %} % >

    Any suggestions are appreciated.

    Mike

    Hi Sara,.

    No, no error or bad files.

    In fact, the data is moved correctly into the temporary table created by ODI, but not the final target table.

    I discovered the reason if the knowledge modules imported were of another ODI installation!

    I made sure to import the good KM and it worked.

    Thank you!

  • Edge inspect CC: failed installation

    Hello

    I try to install on board to inspect CC today, the settle 'Extraction' 42% and then shows ' failed to install, more... "

    By clicking more info shows:

    Exit code: 7

    Please see specific errors below for troubleshooting. For example, ERROR: DW006...

    -------------------------------------- Summary --------------------------------------

    -0 fatal Error (s), 1 Error (s)

    -Payload: Edge inspect 1.5.0.0 Edge_Inspect_1_5_LREFJ.pkg_1.5 CC -.

    ERROR: DW006: Apple package cannot be installed successfully.

    -------------------------------------------------------------------------------------

    .... Reflow, code and animate installed very well today, inspecting is the only issue.

    Mac Pro e2008

    10.8.5

    2x2.8 Quad Intel

    8Gig RAM

    Thank you

    Updated to Yosemite today, tried to install onboard inspect, worked well. Finally.

    Thanks for nothing support Adobe or Adobe in general. Take money from all the world for this subscription CC and have useless applications available solutions. Never any mention of "only works on this version of the OS or who '...

    So problem solved... woo hooo?

  • Inspect dashboard shows all pages that does not change of URL

    Our site is a HTML5 website for mobile devices especially for tablets. On the site if I click or call to open anything that does not lead to change of URL, the edge inspect fails to open these pages in the form of tablets. Is there no work around or its not supported currently.

    Inspect edge listens to changes of URL in the Chrome browser. When a change in the URL is detected, it pushes the new URL for the connected devices. Interactions, as AJAX/CSS, interactivity of the forms, changes of State and scrolls that update the URL of the page, URL change is not detected.

    We are studying ways to improve this feature to detect interactions more page.

  • 5.1 Windows search fails to find files

    I keep the images in folders by year like 2008.  Looking for a 2008 find nothing.  This folder is located on the backup drives: F: and G:, H:, but Windows Search does not find it.  Nor it is images in the folder.  That is what it is?  How can I force a re-indexing?

    Thanks, Imran.  I discovered a right click on the magnifying glass icon.  I re-indexed and it worked.  I appreciate your help.

  • When I try to back up my files on a hard drive peripheral I get this message "backup failed; Cannot find the specified file (0 x 80070002). Any help?

    Help me

    You can try running the Udate system preparation tool in your computer once, and then check to see if that takes care of the problem. You run the correct version of bits of this program after downloading from the links I provided below. If your computer is running a 32-bit version of Vista, download and run the version 32 bits of program and if it is a 64-bit version of Vista, download and run the 64 bit version of the program. If you don't know how to determine what version of bit, your system is running, take a look here to determine yours. Here are the links to download:

    for Vista 32 bit:
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    for Vista 64-bit:
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    First download and save the file to the link applicable to your computer. Double-click the downloaded file and then run it. Once he starts to run, it can appear to be locked to halfway through, do not cancel it assuming that it be stopped. It will continue to operate. This tool corrects missing components in the store Windows Servicing, a place where one can find the important system files. So depending on the State of the operating system, it can even take up to 2 or 3 hours to complete.

    Once he finished running, restart the computer once, and then try running backup. Let us know if this solves the problem or not.

  • Windows search fails to find the files in the Documents folder

    Original title: Windows 7 search finds no files, even though all the settings have been verified and the search index has been rebuilt

    I recently bought a new Dell laptop Studio 1558 with Windows 7 Home Premium and moved through several hundred documents from my old PC to the new folder 'My Documents'.

    As many others have found, Windows Search has been completely useless. She seems to have no problem finding files in the music folder or image, but anything in the document library is invisible to the it - even if I get in a subfolder small for a file name I see just in front of me, Windows Search will announce that "no element not corresponding to your search.

    I took a number of steps so far to fix the problem, which none have worked:

    1. I checked which locations are indexed for search and ensured that the document library is among them (as well as all of my C drive).

    2. I checked that appropriate file extensions (.doc .docx .pdf, etc.) are all selected from the "File Types" list in indexing options (although I noticed that 'Description of filter' for .pdf bed "Registered IFilert is not found" - not this problem with Word documents).

    3. I have deleted and rebuilt the search index.

    4. I ran the troubleshooting Windows 7 Search tool, which reports that it cannot find any problems.

    5. I have read that some problems with Windows 7 search can be solved by changing a registry key (http://www.intowindows.com/how-to-fix-windows-7-search-problems/) but when I navigate to the folder in my registry, only following three keys are here (not the one mentioned in the difficulty):

    • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\ {0B2BAAEB-0042-4DCA-AA4D-3EE8648D03E5}
    • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\ {36011842-DCCC-40FE-AA3D-6177EA401788}
    • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\ {59BD6DD1-5CEC-4D7E-9AD2-ECC64154418D}

    A couple of things, I said - if I create a new word document and save it, Windows Search seems to immediately get back on it and is able to find. I also noticed that at first when I opened one of the word documents that have been transferred over the old PC and then closed it again, Windows Search picked up on it and could find it. So I went to try to open and close then all of my documents (an arduous task...), but the subject to halfway through Windows Search has ceased to be able to find them.

    All Word documents using Microsoft Word 2007 in .doc or .docx format, although the problem also applies to Excel, PDF and image files, so I don't think that the problem is with the word itself.

    I have tried everything I can think so far, including all the solutions, I could see suggested in previous discussions. I really need the search function working to effectively use my laptop so that any help would be welcome!

    Thank you, Jack

    Santosh thanks, I checked the permissions for the appropriate files and SYSTEM was present, which doesn't seem to be the problem. However, I found a solution that might work for other people are having the same problem.

    I noticed that if I changed the location of the files, Windows search suddenly seems to become aware that they existed and then indexed and followed them correctly - even if they were subsequently moved back to the original location. I just created a temporary folder outside my library of documents and then each subfolder in the folder my documents him and then come back, one by one. It was a bit laborious but the problem solved - I know not why it worked, but all the old files are now indexed and appear correctly when you use Windows Search, and it seems not to have any problems, follow-up of the newly created files.

    Cheers, Jack

Maybe you are looking for