Inspect the IP fragment command max and its effect on Anyconnect SSL

Similar Questions

• How to intercept the radio button was selected and its data?

  Good day everyone,

  Need help on this one. This is my first post about components, specifically radio button.

  Here goes my problem, I have several groups of option button. And I want to follow the radio button on each group chose, and I'm going to get the data and pass it to a function loadVariablesNum.

  Thank you

  Any help is appreciated.

  You did not answer to my second question.  Is the button in the same timeline as the mc of content?  And now that you mention the function of the buttons, where you use this code of mine you said gives 'undefined '?

  It will be to your advantage to create a new file to resolve this problem when you have just a few radio buttons and another normal button that uses this code blue.  Once you have that working, you should be able to adapt more easily in your scenario.

• Cascade and its effect on DynDNS?

  OK, so for several months, I had a NSLU2 in a DMZ if I could get there by DynDNS and it was functioning 100%.

  I added a cascaded router and other NSLU2 downstairs to develop capabilities and features of my network home.

  I moved the "public" folder on the second (new) NSLU2 and adjusted the DMZ address in the main router in order to take account of the new NSLU2.

  The new NSLU2 is physically connected to the wrt54g (secondary) (operation in router mode, according to the waterfall in the linksys forums), but I can't reach it by dyndns.

  I have reset the demilitarized zone in the original location (first NSLU2), and it still works.

  So, the problem is that I can not knock the new NSLU2 to DMZ. What should I do for the second router to allow traffic coming to it.

  The second NSLU2 IP is listed in the DMZ on both routers. I have tried establishing a route in the main router, did not work. So, how to fix?

  Too bad. It was a PEBKAC.

  Yo soy estupido!

• Buy the new laptop for Premiere and After Effects

  Hey! I am looking for a new laptop in the order of € 1200, maybe a little more. I'm editing 1080 p (sometimes at 60 fps), but in AE I want to change the templates and create an animation cool intros. Nothing super advanced yet but I want it to be smooth, because on my laptop today, it's super slow (read at 3-12 fps in AE). I also want to Premiere Pro to be faster, especially when I add effects like stabilization deform and it takes too long to make. Sometimes I use hearing, prelude, Photoshop, Illustrator, but especially the first and AE. I want to do a few 4K changes in the future, but that might be too much for my budget. Or not? The reason why I want a laptop is because I want the opportunity to travel and work.

  Mobile current: 250 3 HP

  i5-4210U,

  -6 GB OF RAM,

  -Samsung SSD 850 EVO 250GB

  -GeForce 820 m

  -LCD 1366 x 768 + external 24 "full HD screen

  Laptop, I could buy 1: Dell Inspiron 7559 (€1170)

  + i7-6700HQ

  + 16 GB of RAM, SDRAM DDR3L, PC3-12800 (1600 MHz), two slots taken (8 GB + 8 GB)

  + GeForce GTX 960 m 4 GB GDDR5

  + 128 GB SSD (type m2, according to the photos) + 1 TB drive HARD 5400 RPM

  Touchscreen, display 4 K

  + 3 x USB 3.0

  + Windows 10 home

  -J' need to buy the disk 7200 RPM 2.5 "

  Link (German)

  Laptop, I could buy 2: Clevo P655SE (1200)

  + i7-4870HQ

  16 GB DDR3L 1600 MHZ

  + GeForce GTX 970 m / 3GB GDDR5

  + 1 TB 7200 RPM, 2 empty slots of m2

  + Full HD screen

  + 3 x USB 3.0

  -J' need to buy Windows (or use my old Windows 7)

  -J' need to buy 128 GB SSD m2

  - I'm not sure if ebay is trustworthy

  Link (In English)

  My equipment:

  -display 24 "1920 x 1080 50/60 hz

  -SSD 250 GB 2.5 "form my old laptop

  -Cooling pad for laptop

  Question:

  What are your thoughts on these two systems in combination with my current equipment with respect to the use of programs (creation and AE)? I'm waiting for your answers.

  Best,

  Gorazd

  There is a forum specifically for this...

  https://forums.Adobe.com/community/premiere/hardware_forum

  Neil

• How to get the date of end of week max and its rows of a table

  Hello
  

  Table [temp2]
   
     id          name        dt
    123        a             2-mar-2010
    124        b            1-feb-2010
    125        c             3-apr-2010
    123        a             13-mar-2010
    125        c             13-mar-2010
    123        a             12-feb-2010
   

  This table how to get this line by id - name (id and the name of the composite key) whose date is the date of last weekend (last Saturday).
  for example, suppose to have IDs 123 values date February 12, 2010, 13-mar-2010 this date falls on the last Saturday 13-mar-2010, how to get the value of the line on Saturday last for all the unique id and the name?
  
  So I wrote this but probably there a few traps...
  

  select id,name,dt from (select id,name,dt,max(dt) over(partition by id,name) as 
  max_date from temp2) t where dt=t.max_date and dt in ('3-apr-2010'
  ,'27-mar-2010','20-mar-2010','13-mar-2010')

  Here I have spent in the in clause 4 last weekend dates manually (although either has been calculated by programming) in front.
  Thank you

  Here's another option:

  SELECT     *
  FROM
  (
       SELECT     ID
       ,     NAME
       ,     MAX(CASE WHEN TO_CHAR(DT,'DY','NLS_DATE_LANGUAGE=ENGLISH') = 'SAT' THEN DT END) AS DT
       FROM     TEMP2
       GROUP BY ID, NAME
  )
  WHERE DT IS NOT NULL
  

  It is always useful to provide the following information:

  1. oracle version (SELECT * FROM V$ VERSION)
  2. examples of data in the form to CREATE / INSERT commands.
  3. expected results
  4 explanation of the expected results (alias "business logic")
  5. use.

   tags for #2 and #3. See FAQ (Link on top right side) for details.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                
  

• When I drag and drop or delete or move a file in a different way, it remains in the place where it is and its shortcut no longer works, and a working copy of it appears where I wanted to put it.

  is this a virus? I tried restoring the system several times and it doesn't have this problem. Help, please

  After inspection, everything moves, except that I have to close and reopen the file window to display all changes and I have to log off and turn it back on to see any Exchange Office.

  Hi Colton

  It resembles a kind of refresh issue?

  The next time you move a file and see this problem, try pressing the F5 (refresh) to see if this solves the problem.

  Let us know the results.

  Ragards

• Is there a way took care in the reorg table sys.job$ (and its indexes)?  (Oracle 9)

  I have an old database that has a table of great sys.job$ and the large index on it. (indices are just standard installed indexes nothing we did)    However the table has very little data in it now, only 22 rows.   Yet between the table and index is > 1 GB in size.

  The enforcement team asked me to reorg or shrink the table sys.job$ and explained its large size is probably due to the fact that they believe some process went wrong turned for years resulting in job creation, but his long since been cleaned.

  What motivates is to save space in the SYSTEM tablespace and possibly help some query performance.

  I know that in general its forbidden to directly manipulate the sys objects (such as truncation, insert, etc. with the exception of sys.aud$).

  Y at - it a taken way supported to reduce the size of this table.  Any document referencing.

  Yes, there is a way taken in charge.

  It's called "Recreate the database"

  -------------

  Sybrand Bakker

  Senior Oracle DBA

• Select the last Date of multicolumn and its value adjustent cust_id

  I have a Table with 5 customer_id and 5 Dates with each belonging to its cust_id.

  I need to take the last, in my example would be CUSTID_5.  I know

  this with the GREATEST who select the CHANGE_DATE_5 (in my example), but

  How to choose the CUSTID_x? that goes along with the winning Date?

  create table test_tbl)

  number of custid_1

  date of change_date_1,

  number of custid_2

  date of change_date_2,

  number of custid_3

  date of change_date_3,

  number of custid_4

  date of change_date_4,

  number of custid_5

  date of change_date_5

  );

  INSERT INTO test_tbl

  (CUSTID_1, CHANGE_DATE_1, CUSTID_2, CHANGE_DATE_2, CUSTID_3, CHANGE_DATE_3, CUSTID_4, CHANGE_DATE_4, CUSTID_5, CHANGE_DATE_5)

  VALUES

  (111, sysdate, 222, sysdate + 1, 333, sysdate + 2, 444, sysdate + 3, 555, sysdate + 4);

  commit;

  Hello

  Here's one way:

  WITH unpivoted_data AS

  (

  SELECT custid, change_date

  , EVALUATE () OVER (ORDER BY change_date DESC) AS r_num

  OF test_tbl

  UNPIVOT ((custid, change_date)

  Label ((custid_1, change_date_1) AS 1)

  , (custid_2, change_date_2) AS 2

  , (custid_3, change_date_3) AS 3

  , (custid_4, change_date_4) AS 4

  , (custid_5, change_date_5) AS 5

  )

  )

  )

  SELECT custid, change_date

  Of unpivoted_data

  WHERE r_num = 1

  ;

  Having several columns for several occurrences of basically the same thing is a bad table.  This problem would be much simpler, but also more effective if each pair custid/change_date has been strored on a separate line.  In addition, you would not be limited to 5 pairs.

• Unable to get the database searched with MAX and GROUP BY function

  Hello
  All the
  
  I have a table as below:
  COLUMN TYPE
  User_id VARCHAR2 (10 byte)
  ID_processus VARCHAR2 (30 bytes)
  END_TIME DATE (STAMP)
  TO_LOC VARCHAR2 (12 bytes)
  TO_LOC_TYPE VARCHAR2 (15 bytes)
  FROM_LOC VARCHAR2 (12 bytes)
  ITEM_ID VARCHAR2 (25 bytes)
  CASE NUMBER (12.4)
  LMS_UDA1 VARCHAR2 (250 bytes)
  AREA VARCHAR2 (2 bytes)
  
  I only want to get one record with all the columns, have only one clause MAX (END_TIME)
  But the other column value of the difference.
  When I use MAX (END_TIME) and GROUP OF USER_ID, ID_processus, CASE...
  the sql did not a single record,
  It gives the number of records
  
  Please help me on this
  
  Concerning
  
  Saven

  >
  I only want to get one record with all the columns, have only one clause MAX (END_TIME)
  But the other column value of the difference.
  >
  Maybe it's not possible because it depends on your data.

  If the combination of all columns except END_TIME is not unique then there will be multiple records; a record for each unique combination (GROUP BY) of all other columns.

  The only way to ensure that a record is

  SELECT MAX(END_TIME) FROM myTable
  

• "The String to Byte Array" and its operations on-site (memory) of twins "Byte Array to string"? (or if they incur sentence of copy/memory operation?)

  I can't deduct the answer to this question (topic/post title) of the help of LabVIEW on the functions.

  Intuitively, it seems that the two representations of data are equal to the memory and so goes between the two should essentially be a no-op when the code is compiled... but is it? (assuming that the length of the array of strings/remains constant, can I go back repeatedly without performance?)

  As a string of LabVIEW is a handful and any other type of data except tables aren't a handful; that implies to me that a string = U8-table-grip handle and so a string into an array of U8-could be a memory or inefficient operation since no conversion actually take place?

  The reason I ask, is that when you work with for example TCP Read or read VISA, 'data' reading is always a string, but according to what you are doing, this string is often more efficiently processed/interpreted if converted to an array of U8 and I just want to know if (memory and CPU point of view) I can move freely between the chain and U8 array and return depending on what format is most appropriate to a point?

  (Also, I'm at this stage fairly certain that the "array of strings of bytes" is cleaner AND more efficient than a type-cast to an array of U8 strin... but I could be wrong.)

  I did some tests on this just now, and my conclusion is that it is completely in place. The local users group had a coding challenge when this became relevant to my solution.

• Is it safe to disable the startup of Windows Defender and its services

  I use Microsoft Security Essentials on my machine.

  In the analysis of programs that I can disable to start at the beginning - until by msconfig.exe, I found Windows Defender that can be turned off, since I'm using MSE.

  Is it safe to do?

  When you install MSE, it will automatically disable Windows Defender and event he could come at the start, it does not cause performance problem. Start by opening Windows Defender and if it shows that it is disable, then you don't need to do anything. However, if it was open, then go to settings and turn it off.

  It is better that do not disable startup for Windows Defender, in case you want to uninstall MSE for a reason, you have a protection against spyware and Windows Defender can switch on. But there is no hight impact the performance on your system.

• Im confused about the security of my computer and its compatibility with my software anti spyware... StopZilla...

  My computer came with Norton Security.  I didn't like it so when it expired, I stop Zilla.  can I go ahead and remove the Norton program?  and StopZilla is compatible with the Windows defender and other security provided with the operating system.  Help... I am so tired renewal norton windows popping up all the time. Thanks for your help

  Hello

  To add the good advice of TG, you don't want two of the main antivirus on the computer products
  at the same time much less running. Don't forget to use the removal of the machine tools to prevent
  problem causing leftovers when you want to uninstall/remove an antivirus/security products.

  Norton - removal tool
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Removal tools
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Script to export the Muitlple IP address information and its subnet, VLAN and bridge

  Hello

  Looking for a script capture several IP address and mask of subnet, gateway, information of VLAN to more than 1000 VMS in vCenter server. I don't know how to get Get - VM loop for several IP address, gateway subnet, VLAN, to export to the CSV file.

  Could you please tell me the correct syntax for this. Thanks in advance.

  You're looking like that?

  Guest os ipaddress, subnet and gateway information

• rocker and its effect on the program

  Hi dear DBAs,
  
  We have a business application, written using J2EE technologies. It uses a single oracle database. We decided to improve the availability of the application by making a database waiting for our primary database. After some research, we found that datagurad oracle is suited to our need. We have worked with him in a test environment and everything was all right, by using the grid GUI control. The question is, is it enough to set up a database for our main GC pending? or should we change our application code and settings to match the new architecture? In the case of a failover or a failover, how application includes the address of the new database?
  
  Thanks in advance

  Hi Z0lenDer,

  From a database point of view, DataGuard will provide more rapid data recovery and protection of your application data. But for the application to continue working after a failover of the database / failover, you must update your application code and configure to connect to the database from backup when it becomes active.

  This change will refer to the application layer, not in the grid control. You can either use a database trigger or recovery of connection in your application to connect descriptor to ask him to connect to the database instance active.

  Discover the Guide de Configuration DB HA http://download.oracle.com/docs/cd/B19306_01/server.102/b25159/configbp.htm#sthref388

  I hope this helps.

  Farouk

• How the name of customization associated with its file in Anyconnect VPN?

  Here it is the Anyconnect VPN configuration. The customization uses a value - CBB. My question is how Anyconnect VPN define value - CBB. I found no where to define CBB in the configuration. The CBB file is in flash. If so, why I don't see the name of CBB associated configuration with the file located in flash. Thank you.

  --------------------------------------------
  CBB group policy internal
  CBB group-policy attributes
  WINS server no
  value of server DNS 172.16.1.1
  SSL VPN-tunnel-Protocol ikev2 client ssl clientless
  WebVPN
  value of the CBB URL-list
  AnyConnect ask to activate default webvpn timeout 30
  value of customization CBB

  BBC tunnel-group type remote access
  BBC-Global attributes tunnel-group
  address pool SSL_Pool1
  Group Policy - by default-CBB
  BBC webvpn-attributes tunnel-group
  customization CBB
  enable BBC Group-alias

  WebVPN customization objects are stored either in the / + CSCOU + / or / + CSCOE + / directory hidden for plaintext and encrypted items page respectively.

  They are managed through ASDM (Configuration > remote access VPN > clientless SSL VPN access > Portal)