Inspiron 11 3147 - service of wake-up problem

Similar Questions

• Dell Inspiron 11 3147 battery "Do not load"

  This new Dell Inspiron 11 3147 just arrived today.

  The power adapter is "connected", but the battery is "not supported."

  I looked everywhere for help for this, the Dell Diagnostics found no problem and I've struggled to get a hold of customer service. The idea most commonly recommended is to uninstall and reinstall the driver ACPI Microsoft NER method exactly, what I did.

  The only thing I have not messed with is the battery itself, which does not seem to be accessible without damaging the back, which is screwed and secure well.

  No idea what is the problem?

  Update from my post below:

  A day later, after the battery fully charged and all was fine, I come back and it's back to the message "plugged in, not charging." I could see if flashing the bios and rebooting will work again.

  My original post on December 8, 2014:

  I had this problem until this morning. In short, I have updated the bios to Version A03, A03 (released December 2, 2014). Before that, I did all the googling and messing everything without success. Here's what to do:

  1. run "my Dell. You can access it by type Ctrl-Esc and then type in "My Dell" and clicking on the "My Dell" icon that appears.

  2. click on the Green Panel "Drivers and updates. This should open a window for product support browser.

  3. scroll down under article which said that "these drivers matching your selections" and click on the arrow next to "Bios".

  4. click on 'Download file '. Please close all applications and run the file and follow the prompts. It will restart for you at the end and the problem should be solved.

  Good luck!

  Ben

  Version A03, A03

• DELL Inspiron 11 3147 2-in-1 upgrades

  Nice day. I wanted to share my experience with the DELL Inspiron 11 3147 2 in 1 with Intel N3540. I bought the DELL decision-making. Receipt in very good condition. Slight marks pry where the bottom cover had been removed. I liked the form factor, the convertible function, the choice of the processor and suggested the battery life.

  I added,

  SAMSUNG SSD 850 EVO 250GB,

  Kingston HyperX 1600 MHz CL9 SODIMM 1.35v DDR3L Impact computer laptop memory HX316LS9IB/8 GB Black and

  Intel 7265NGW Dual Band Wireless-AC 7265 802.11ac, Dual Band, 2 x 2 Wi - Fi + Bluetooth 4.0.

  The tools,

  small Phillips screwdriver,

  nylon spudger levers, to promote the elimination of the lower pane l to facilitate the removal and installation of the 3 elements mentioned.

  Adapter USB 3.0 to 2.5 "SATA III hard drive cable w / UASP - SATA to USB 3.0 Converter for SSD/HDD - hard drive adapter cable

  or

  Case disk 2.5 "SATA 6 GB/brightness with USB cable

  Cloning software (Samsung included migration and optimization of the software). You can download from the Samsung website, or drive transfer included, you will need an external optical drive.

  Samsung software at this point 20/08/2015 can support Windows 10 who I had updated. The migration software would not recognize the Samsung SSD as I tried to clone the SSD drive. I called Samsung Customer Service and the other suggestion is that among the updates of Microsoft or DELL, can hide the USB connection. I used the recovery software to get back the Inspiron 11 3147 to original state of Windows 8.1, (no update) and the software of Samsung acknowledged the SSD. I installed the SSD and the recognized system. I am now in the process of updating Windows.

  I had installed memory, 8GB, and the system has recognized and acknowledged the 8GB.

  I had installed the WiFi card and the system has recognized and acknowledged the new card. The Intel 7265 is slightly wider than the original 1707 of DELL, which is a single channel card and he returned without modification.

  There are other options of brand for replaced parts.

  The main idea is to take your time, the background suppression is not complicated, the pry bar helps not to damage the case which is plastic. Parts of Austin, Texas people have a video on You Tube to remove the back to facilitate the removal and insertion of the HDD/SSD. The battery and the HARD drive screws must be removed to perform the Exchange.

  I will update with new information regarding the replaced elements.

  Hello

  I've updated the 3147 11 for Windows 8.1, all updates, you are prompted for on 21/08/2015. Windows 10 was not an option at the moment. I re-recorded through the icon of the window that appears on the notification at the bottom bar to the right. I added no additional software other than Bitdefender Free Anti Virus and CCleaner. I removed McAfee Livesafe, using the remove McAfee software before I cloned the Samsung SSD.

  Notes on hardware upgrades:

  SAMSUNG 850 EVO 250GB SSD; The Samsung magician software news. Used space shows 40GB (Windows 8.1) 191GB of free space. Total capacity in the new storage 232.89 GB drive. The SSD is set for maximum Performance. Performance tests show sequential read 283 MB/sec, sequential write 271 MB/s, 27292IOPS and 18419IOPS to write random shuffle.

  The Samsung SSD 850 EVO has the ability to preform better. The Dell system does not support a port SATA 6 GB/s (SATA3). The Samsung said that the SSD is connected to a SATA 3 GB/s (SATA2) port. I ran across this info on the net. Samsung software seems to be in accordance with that.

  At this point, I accepted the results. I don't game or running demanding software that read/write of the highest scores would be beneficial for me. The advantage of using an SSD vs HDD. The SSD has no moving parts that I have to worry that I hold or move the 3147 11. The beginning, opening closing of the application software/is faster than the 5400 RPM HARD disk provided with the 3147 11.

  The memory of 8 GB of Kingston: The Microsoft System info shows GB 8.00 (7.89 GB usable).

  The Intel Dual Band wireless AC 7265: I have not used any test method to determine the actual changes compared to the Reference Dell 1707. It connects and maintains the connection. I use TWC combo phone/TV/internet by modem. The 7260 Intel and wifi 7265 cards were and are used in other DELL products.

  3147 11 Device Manager shows all connections, no problems. I mentioned that when I had updated for Windows 10 with the HDD, I see a problem a device not connected and no driver available. I will look when 10 Windows is installed.

  Terry, thanks for your question.

• Upgrade SSD Inspiron 11 3147: have you had any success

  OK, is that what someone had a successful upgrade their hard drive to ssd in the Inspiron 11 3147?

  Just reply:

  1: Yes or no

  2: what ssd and size

  3: what kind of procedure/software you used to put it on disc

  4: did you change in the bios so that it can run

  5: If you didn't have any success, what was the problem

  1 Yes

  2 kingston 240

  3 Macrium reflect

  4 start option changed to uefi at the local level (MBR)

  5. initially tried to use a crucial/256 using macrium reflect... copy image (data on disk saw) was not recognized as bootable (uefi or local)

  a. After successful installation attempted to clone crucial 256 from Kingston to work... would not work

  b. rated difference

  1. the original drive had three sections of connection (sata two connections and the other who looked like that might be where one would use the crucial non-working riders had only two sections working Kingston had three just as the original drive.)

  I know that my info is very generic and not very technical, but I am running.

  I replaced the stick of 4g with a key of 8 GB also... waiting on 802.1ac wireless card to complete my upgrade.

  I hope this helps.

• Inspiron 11 3147 cannot detect SSDS in AHCI mode.

  Hello.

  I bought the new Inspiron 11 3147 (2 in 1 model).  When "SATA Operation" is set to computer laptop AHCI cannot detect the SSD (Intel 530) in the Setup Windows 8.1.

  When I change "SATA Operation" to ATA Windows 8.1 can detect SSD in the installer without any problems.

  I think that it is the BIOS error. There will be an update? I can't use my SSD now :(

  Kind regards.

  Resolution is not to use the disks mentioned problems that Dell does not guarantee compatibility.

• Inspiron 11 3147 "plugged in, not charging".

  My Inspiron 11 3147 stopped charging. The adapter seems to work very well even if, after a hiccup when he says "adapter type cannot be determined.

  Steps I took to try to solve this problem:

  -Inspect the connections on the charger, they seem to be good.

  -Inspect the external area of the connection of the charger to the laptop, it seems fine.

  -Go into the BIOS and look for the adapter warnings. None.

  -Go into the BIOS and try all the settings of the charger. Nothing changes.

  -Remove the battery from the Device Manager. Reset. Nothing changes.

  -Uninstall the adapter from the Device Manager. Reset. Nothing changes.

  -Physically, remove and reinstall the battery itself. Nothing changes.

  In the BIOS, it is said that the adapter is 65 W and since there are no more errors on the adapter in addition to one that has popped up in Windows and did not return.

  I think it could be the battery that has just stopped in for a charge. Does anyone have advice?

  First thing to try: a new Dell OEM AC adapter.  If this does not fix it, replace the DC Jack:

  >

  And if that does not solve the problem, replace the motherboard.

• Satellite Pro A60: Generic Host Process for Win32 Services has encountered a problem

  Satellite Pro A60 - Win XP Pro SP2.
  I recently started getting this error:

  "Generic Host Process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »

  and I was wondering if there are any known issues specific to Toshibas or specific to the operating system?

  Any guidance advice appreciated.

  Well, it could be a virus or malware.
  I recommend you to update all your anti anti-virus applications and if you have not installed a program such as ad-aware or spyware so you need to do.

  Check if your all the service pack are up-to-date. Last use the installtion of new OS could help

• TCP/IP services has encountered a problem and need to close. Windows Server 2003 R2 SP2

  TCP/IP services has encountered a problem and need to close.

  Windows Server 2003 R2 SP2

  That left me without a network or to the Internet on a PDC named DOMCON.

  Tried so far:

  1. last signed NIC drivers installed (8.0.27.0) to HP NC3120 Fast Ethernet NIC.

  2 netsh int ip reset resetiplog.txt

  reboot, enter the details of the intellectual property, etc... NO JOY!

  This server has been running for years until now.

  I can join the registry and files DOMCON_MpsReports.cab NetworkSubkey.reg section.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link:http://technet.microsoft.com/en-us/windowsserver/bb512919.aspx

• My L7680 HP Officejet all-in-one prints only about 1/4 of a photo. Help desk services is not a problem.

  My L7680 HP Officejet all-in-one prints only about 1/4 of a photo.  Help desk services is not a problem.  Is there a solution? MHow

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP L7680 - set for your version of Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=2512009&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3

  How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.

  When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.
  someone has a better solution that take care of this problem.

  Hello

  Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:

  http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx

  Hope the above information is helpful.

• I get the error "Generic host process for Win32 services has encountered a problem and needs to close."

  Original title: I'm under Win XP Pro 64-bit with an amd processor.

  Hi all

  I get "Generic host process for Win32 services has encountered a problem and needs to close" when I first start the computer, the sound works, but after the old generic host appears the sound does not work?  Don't forget that I'm running 64-bit software.

  The search does not work.

  Any help would be great.

  Hi bohawk,

  I got to hit this article the error that you are experiencing with your computer. Refer to the same thing, check if the patch is useful.

  I hope this helps. If this isn't the case, answer so we can look for other options.

• Get an error asus eee pc acpi service has encountered a problem and needs to close

  I get an error on startup: get an error asus eee pc acpi service has encountered a problem and needs to close

  What can I do to fix this?
  GR Erik Frederiks
  (Asus EEE PC 1005HA)

  Hello

  Did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Step 1: Start the computer in safe mode with network and check the issue

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem does not occur in safe mode with network, follow the next step to isolate the problem.

  Step 2:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Reinstall ACPI drivers from the site of the factory

  Click on the link http://www.asus.com/Eee/Eee_PC/Eee_PC_1005HA_Seashell/#download and try to reinstall the drivers.

  It could be useful!

• Get error "Generic Host Process for Win 32 Services has encountered a problem.

  Original title: generic host and other problems

  I'm using XP Prof SP3. I have following problems: 1. get "Generic Host Process for Win 32 Services has encountered a problem..." ' 2. audio past. 3. can't get wndows update downloads, 4. Security Center says "... not started or was stopped. Help please.

  Open the command prompt and type this:

  sfc/scannow

  Let the run command, if the problem has not resolved, try the system restore and restore your system at a time before the problem happens.

• We still get a window that appears on all 30 seconds that says our Wi - Fi service has encountered a problem and won't close

  We continue to receive a window that appears on every 30 seconds that says our Wi - Fi service has encountered a problem and won't close. He said that there is an error report created and sent to you.

  original title: Wi - Fi Service

  Hi Mohammed Ghouse.

  1. Did you the latest changes on the computer?
  2. What is the type of internet connection you use on the computer?
  3. You have security software installed on the computer?

  Method 1

  Check if the problem persists in mode safe mode with network mode and post back with the results.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in mode safe mode with networking mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.