Inspiron 531 does not completely start upward after replacing the power supply?

Similar Questions

• SAT L500D does not have to be connected to the power supply until the reboot

  Hi all

  I have a L500D, purchased locally and I have a problem that seems to escape correction by the helpdesk of Toshiba. My laptop while operating on battery comes with messages expected that the battery has x % remaining and suggests I plug the laptop into the power supply. I connect the laptop on the adapter and the power of the taskbar icon indicates the adapter is plugged in but it also shows that it does not load (adapter also remains cold, indicating no power is being developed). Low battery messages continue until the laptop stops ultimately. On commissioning again the laptop acknowledges that she attached to the adapter sector and charges upward.

  Helpdesk from Toshiba said a new BIOS version had been released and that I should update the BIOS and would probably "fix the problem". Went to the Australian Site and there is no other choice to see downloads for this model L500D [product number], helpdesk then took me on the European site where I updated the BIOS, then spent several hours on the phone with Symantec trying to uninstall and reinstall Norton 360, which ceased its activities and could not be uninstalled leaving my laptop not protected.

  Someone at - it an idea of what is the cause and how it might be remedied? Appreciate your thoughts.

  Hello

  If you have updated the BIOS and the help of t n right?
  Hmm I think that this problem of card mother s that looks like the adapter does not work correctly because everything is ok after new reboot
  I think the laptop is under warranty and you should get in touch with a local ASP to discover exactly what s wrong

  But I think that it s motherboard related question

• Photosmart 6515 does not print black ink after replaced the cartridge

  I am very frustrated! I can't get my Photosmart 6515 print black ink.

  Our school sends the documents by e-mail now that we have to print at home. Ideal for them, but not for me. They are usually in PDF format, so I do not have the ability to edit and change the blue color to print, either.

  I only use HP cartridges on this printer. I know it's more than a year, in order to call phone support will do no good.

  I replaced both cartridges and now it shows black ink completely full, but when I print the printer status report, black is not displayed. Black does not appear on the tool pages, either.

  I tried the command "clean printhead" several times. I unplugged and waited. I took all the cartridges. Connections look clean.

  What should I do to perform a partial reset or full?

  Hi Photokool,

  I understand that this has been a frustrating experience for you, and I want to help him.

  I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• My Firefox does not completely start upward and the window that opens is insensitive, black zero poster toolbars

  My cursor also changes for the text cursor when I try to click anywhere on the page.

  Hello MaggieMarx, please update Firefox 33.0.1 here: https://www.mozilla.org/firefox/all/

• dc5700 form factor. Small: do not start after replacing processor power supply

  Recently, I replaced the power supply AP15PC56 model after that it exploded with the part number 404472-001. now, the cpu starts up. When I connect to the power he does 4 short beebs and the led lights red. What could be wrong?

  Greetings,

  Please see this HP Support document for all troubleshooting tips.

  The defective power supply may have fried the motherboard.

  An excerpt from this document which seems to describe the symptoms that you are experiencing:

  Power LED flashes red four times, once every second, followed by a two second pause, and the computer will beep four times. (Beeps stop after the fifth iteration but LEDs continue to Flash).

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• 3200 Maxtor disk external drive (installed) does not systematically start upward. I get the message "code 10". How can I fix it?

  I did troubleshoot directions, uninstalled and reinstalled.  Also disconnected and re-connected.  Sometimes it works, but not always.

  It is a new problem.

  According to this thread support, the drive doesn't have enough power to start, and sometimes the player not spin up. It seems that, over time, the power supply provided by maxtor, when you bought to deteriorate and no longer provide enough power to the drive. When the player does not have enough power to the adapter, it can try to draw power from the USB. When the player draws too much error, windows it disconnects and gives you the error code. try to find another 12v adapter that matches.

  http://forums.Seagate.com/T5/other-external-products/personal-storage-3200-error-code-10-start-up-error/m-p/34358/highlight/true#M1258

• HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

  HP Deskjet 710C on Windows XP

  Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?

  There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.

  I hope this helps!

• Replace the power supply, computer does not turn on

  I had a Seasonic SS 560 KM power supply for my HP Pav e9280t.  I removed the old power supply while keeping the power cable is plugged in.  Then replaced each power cables one at a time in the new power supply and finally he attached to the tower.

  Now when I try to turn on your computer, it just boots barely upward.  I can hear the fans kick on for a second or two, then everything just stops.

  Since I replaced the cables one at a time I don't think I missed anything; MoBo, Fan of MoBo, 1 optical drive, disk HARD 2 and 1GPU.  The tower is open and I can see the fan, the fan GPU MoBo and PSU fan all hang on one second so that they get the right power?

  I must have missed something or possibly faulty PSU?  Any help will be appreciated.

  Hello Chadow86, it is possible to the new power supply may be faulty. I would check double all the connectors again.

  Since you mentioned the fan to the motherboard, it would not be necessary to unplug the CPU fan when you changed the power supply. The CPU fan power source comes from the motherboard and not directly from the power supply. I don't know what fan on the motherboard you are talking about.

  I watched the specifications and photos of the new power supply. It is a modular design. I would check the cables connected to the power supply to make sure that they are in the correct connectors.

  If the system still does not start, the cause could be a new power supply faulty.

  I hope this helps.

• OfficeJet 3830: Black ink does not dry printhead upward after a few days,

  I had a problem where the black ink cartridge has dried to the level of the holes and would not print. I have it soaked in water / alcohol and got it to work and it printed fine, but 4 days later, it was dried again.

  Soaking in water / alcohol it fixed, well, maybe the problem is where the print run the Park. Are there not a sponge, or something?

  What can I do to fix?

  Thank you

  PS, the color ink prints fine with something of dipping or other necessary. In addition, these are HP ink cartridges. I bought the new printer around February 2016.

  Thank you!

  I suggest trying these steps here: the problems of print quality

  If this seems not help. I recommend you to call phone support directly to see if they can replace the cartridge that is drying out. The HP cartridges should not be dry as fast.

  Here is their contact information:

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• My Aspire one 753 does not connect to WIFI after using the Recovery Manager.

  After using the recovery on my Aspire one 753 inbuild Manager my phone doesn't conect to wireless internet. I think the problem has something to do with the drivers, but I'm not sure. need help ASAP

  I used the live usb of ubuntu when I discovered that my network card was acutally one of Intel wifi card. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24217&lang=eng&ProdId=3316. Thank you very much for your support on the issue

• BLACK ink cartridge does not come back up after changing the cartridge.

  I replaced the cartridge a few days ago and it was printing fine, but today, I tried to print something

  and it was like all other lines... lines, it wasn't like there was just a spot of ink on the

  paper anywhere in the line.  After detach the cartrdige, can't do it back up again in the printer.

  What could be wrong?

  Hello.

  It would be useful to know what model of printer you have.

  See you soon.

• my laptop stops automatically and randomly and start again after pressing the power button / stop

  Hello

  my laptop stops automatically and randomly and restarts after pressing power button.my pc running windows 8 version of system.can you please solve this problem.

  Hello

  Check if the quick start option is enabled, your laptop. Here are the steps:

  1. open the Power Options window. Use one of the following methods:

  A. press the WIN + R keys at the same time to launch the Run dialog box. After that, type powercfg.cpl , and then press enter.

  B. press the WIN + X keys at the same time to launch WIN + X Menu. After that, select Power Options.

  C. the Start screen and the Windows of type power will show the results, select the Power Options.

  2. click on settings , then choose change how the power buttons.

  3. scroll down and look for turn the (recommended) quick start under stop settings.

  4 uncheck the checkbox, and then click save changes.

  Note: if the option has said isn't here, scroll down and select change settings that are currently unavailable to change.

  5 restart your laptop.

  Let us know how it goes.

• HP-15r205Tu: laptop does not completely start after a few seconds, there is white screen

  My new laptop after 1 month all of a sudden when I start it up it crashes after a few seconds and screen looks white black n empty... no keys of the keyboard have been Woking and... power button it freezes also as hell... den I remove the battery and den only judgments... what happens to my new pc

  Hey @priya_17,

  A system restore would return the laptop to an earlier time when things worked ok. An update can sometimes what you see. A hiccup in the system so to speak.

  So, if restore you it, it will cancel the hiccups.

  I hope this helps.

  Thank you.