Inspiron one 2020 does not start

Similar Questions

• My new Inspiron one 2020 does not connect to the internet via ethernet.

  I have connected my a 2020 new victory 8 to our office via a network cable and the following occurs: Broadband connects to the router, but not internet access. I can reach our router and see the router configuration and status screens, but not the internet.  The rest of our office has perfect internet access. I tried two calls to support, and abroad, people insist that they go through their material problems even if the network adapter works obviously.  I suggested that it was probably a problem of windows security, and they said to reinstall windows.  Very frustrating.  Any help out there?

  I finally got internet connection ignoring suggestions from tech support and following my instinct that he was related to security.  First, I removed the McCaffy and turned off the windows firewall.  Then I crossed the ip configuration for the 6th time and ended up dhcp and my dns settings in tcp/ip to work and I had internet.  Firewall turned on him again and consider using Windows Defender.  I complete installation tomorrow after that updates Windows Update are downloaded while I'm resting.

• Dell XPS One 2710 does not start - should I all reasonable options?

  A few weeks ago, my 18 - month, Dell XPS One 2710 has started to act up.  Still not start correctly.

  Ran the Dell diagnostics on their Web site.  Everything was fine - no detected hardware problem.

  Yesterday, the computer completely stopped working.  It would be start, after a sweep of drive long, finally on the desktop, but can hang after 10 minutes.  I'm on Windows 8 (not 8.1).

  Today, I thought I would do a system restore to a point a month ago.   But today I can not get a startup complete, impossible to get on the desktop.  Therefore, can't do a system restore.  Instead, I see this screen.

  I have the options to continue?   I don't have a recovery disk.

  

  You can install 8.1 on top of what you have by a 16 GB or more usb flash drive as a bootable recovery media.

  If it does not recognize the key to your Bios, you can use a generic key for install but not activate.

  All the pre installed 8.x are 64-bit so make sure you download the correct version.

  XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB (Windows 8.1 Pro)

  Windows 8.1 334NH-RXG76-64THK-C7CKG-D3VPT (home)

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Inspiron 13-5323 does not start after the new installed hard drive

  Fall of my Inspiron and Geek Squad said she needed a new hard drive.  I installed a new identical to the former myself blue WD.  When activated, it immediately passes to "Phoenix Securecore Tiano Setup.  Pre-launch tests indicate that the new hard drive works fine.  I tried to start in safe mode UEFI and in the boot Legacy mode, but no boot.  I get a message "Not found operating system".  It is my understanding that this computer has an operating system embedded on the motherboard.  I previously had it improved Windows 8.1 to 10.  When I tried to boot mode safe mode using F8, I had the same operating system not found message.  The F2 and F4 keys on commissioning do nothing different, either.  Am I missing a step in the window settings of Phoenix?  Suggestions while in Phoenix window bringing me could happen to start the system would be appreciated.

  In fact you have reloaded the operating system?  If not, the new drive is empty - it's why you see the message you see.

  You will need all the recovery media, as you did when you received the system - or, if you do not prepare a set, you will need to call Dell to buy a flash drive with the media today.  The alternative is to download Windows 10 TH2, of the same version (standard, pro) that has been installed and activated previously.  You can then reload the operating system.

• Acer Aspire One 522 does not start

  I replaced the RAM of 1 GB in my 522 an Aspire. After that the netbook starts not more. Only the blue power led flashing and I hear the fan. I can only turn off by pressing the button for 5 seconds. The screen is black and I can't access the bios. Now the laptop no longer starts with the original module either. I'm looking for a way access the bios, but I found nothing for this model on the internet. Hope someone can help me. Thank you

  Finally, I took a better look at the RAM module and the slot. Although I replaced the modules many times it seems that they were not properly placed in the slot. In any case, it works with my new 2 GB module.

• L7780 all-in-one printer does not start make

  The printer is stuck in an infinite loop of starting with the control panel not showing that the HP screen with the rolling radius, the power button light flashing and a paper feeding mechanism works and sometimes fax will beep every 30 seconds. The printer then repeates the sequence.

  I tried to reset the options # + 3, # 6, # + 9 but the best response is the screen display language in the background selection masked by the message "power off, and then click" Control Panel.  Accepts power takes and the boot in the infinite loop sequence.

  Connection to the laptop to try to diagnose or install a new firmware is failed course because the printer performs the computer starts arguing with her.

  Have another short of options that may disconnect the on-board battery to clear no matter what memopr, however I do not see the battery.

  Problem solved by removing the printer part to extract the circuit board and remove the battery for a few minutes.  Reinstall the battery and the circuit printed then restarted with # option + 6.  Control found on the printer.

• Inspiron desktop PC does not start

  I have a desktop PC Inspiron 560, which works very well.  Suddenly, it boot to the top.    I ran diagnostics on it and receive error 2000-0141 and 0F00-136 messages b.  Can someone explain to me what is happening and if it can be fixed?  Thank you

  Sounds like a hard disk failure, and it probably needs to be replaced...

  I hope the personal files are saved on an external support.

• (Redirected) Dell Inspiron N5110 does not start

  Hi, my laptop Dell Inspiron N5110 is now 3 years old. I recently had a hard drive fail, then replaced by a new. Now the machine does not start. I have a boot disk in the DVD player that swirls, but gets no further. I get also is no longer the screen Dell displays (before the windows one). In fact, everything is empty. I tried to remove the power supply by battery pack and power holding down the button for 1 minute then re - again no difference. Is there anything else I can do or is the death machine?

  Thank you

  Daniel.

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Computer does not start up___Can I download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.

  See if anything here helps-

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• my screen saver does not start. I select a screen saver, set the time, apply and nothing. This has happened before and corrected himself. Maybe one setting in another program? ___

  I select a screen saver, set the time, apply and nothing.  This has happened before and corrected himself.  Maybe one setting in another program? It's on a laptop.

  Hello jerrylumpe

  1. If you use an old mouse, try to clean it.

  2. you can have a running process in the background that keeps XP thinking that he is busy and so the screen standby does not start.
  Go to msconfig and uncheck everything you don't need, then see if the screensaver will kick in.

  Start/run and type
  Msconfig
  Ok

  Startup tab
  Keep the page open then click on the link below. It will tell you what are all the entries and see if you can disable them or not

  http://www.SysInfo.org/STARTUPINFO.html

  Read the key at the foot of the page, then click on "Here" at the top. Use the search box to check all your entries

  Try this too
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Line 51 left side. Click on "toggle".

  It could be that something is resetting the timer. For example, it does take much vibration to move the mouse a little, and which will reset the timer to zero. Something like that would be possible? Or a pet that walks on the keyboard?

• Dell Inspiron Laptop with Vista installed at the factory does not start.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

  Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

  If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

  Sorry we can't be more helpful.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Envy20 d030 than all in One does not start

  A week ago, after I downloaded Win 8.1, I received a notice about the HP updates.  I did the updates, but the next morning, the computer does not start and the ports or the CD player also would not work.  I tried F10 and F12 but got nothing.  I do not remember the specific message there was, but it would not move from the initial start-up phase.  I took it to a repair shop and they told me that the BIOS has been altered, as well as areas of the hard disk; the 4 MB of ram card was also burned (we had a lot of lightning, so I don't know if that had nothing to do with this and no more than technicians).  The MOBO extracted fine.  I replaced the hard drive and let the 2 MB of ram.  Everything seemed fine.

  Yesterday, I tried to replace the features and specifications of the factory.  I was last updated drivers and rebooted the computer to complete the installation of the system, but the computer wouldn't even start.  HP turns on but it then immediately goes to an error message "no boot disk was detected or the drive failed.  F10 and F12 nothing else that the CD player and the USB ports seem to be ok.  I remember that the updates was a BIOS.  When you perform this update there was a message to be formatted a sector of the hard disk (sector F) but has no so I cancelled it.

  Data sheet (current): Envy20 d030 Touch Smart All-In-one

  Windows 8.1

  64 bit

  2 MB of Ram

  1 TB harddrive

  I hope this is enough information for someone to help me.  My questions are; That's happened?  How can I solve this problem?  If I order a HP recovery package that will, as much as there is a new hard drive in the machine.

  I'm very frustrated about that.  Not only by problems and my loss of use of my computer, but also costs I hired.  I have had many computers and I'm pretty tech savvy but nothing like this has ever happened to me before.

  Thank you

  Pat - D

  Hello again Pat-D,

  The recovery disks will be won't on which hard drive you have installed. Your computer comes with a 1 to SATA HDD with a rotation speed of 7200 RPM. If you have another hard drive in there and recognize your computer, you should be good to go.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Inspiron 3737 does not start?

  Hello.

  Can Inspiron 3737 does not start. See the following video.

  Can you tell what happened to him?
  Computer configuration laptop manufacturer is unchanged.
  At first it was a problem some time and he started to run after 2-3 commissioning. The number of switches required for a departure then become higher. Now it does not start at all.

  Hello.

  I got sick.

  Here's the video I mentioned

  www.YouTube.com/watch

  Please help me to identify the problem.

• Inspiron 620-7750 Radeon with 450W power supply installed does not start

  Hello!

  I have looked EVERYWHERE online and on the forum and have seen several posts on this topic and still not found a solution that works.  I have a Dell Inspiron 620

  • I5Intel Processor2nd Gen Core i5-2310 / 2.9 GHz
  • Memory8 GB / 8 GB (max)
  • Windows 7 Home Premium 64 - bit Edition operating mode
  • Optical DriveDVD±RW
  • Graphics technology ProcesseurIntel HD Graphics 2000 dynamic video memory 5.0
  • Integrated graphics controller

  Recently, I buy a Powercolor Radeon 7750 graphics card I have installed the drivers, uninstalled the current Intel Graphics driver from Device Manager and then install the new card.  I of course unplugged the PSU got rid of and left in power has failed to myself and plugged into the PCI-E.  After I tired to turn on but it does not start.  Fans begin to turn, including on the graphics card, but nothing comes up on the monitor and it won't start.  When I unplugged the 7750 card it starts very well?

  At first I thought that it was not powered ridiculously horrible 300w PSU they put so that I have upgraded to an a 450w.  Everything works with the new power supply installed without the card, but as soon as I plug the new map, he continues to not start as before installing the card.  I have searched and tried things for 2 days now and CAN NOT find a solution.  I know that the 620 does not access the menu of the BIOS under settings in advance who does not help (don't know why Dell would never think it was a good idea!) so I can't change anything in there.

  Please, any help would be fantastic!

  Thanks in advance!

  The card is a bad card.  There should be ZERO problems with the supply of the stock 305 w and a 7750.