Inspiron One 2320 - USB will not recognize Keyboard (wireless and usb keyboard)

Similar Questions

• HP 5530: Printer does not recognize the wireless router

  Printer worked so well. Moved and changed via AT & T Uverse and printer HP 5530 network will not recognize the wireless router information. I uninstalled the printer from my ASUS laptop and tried to reinstall nothing doesn't. The cd supplied with the printer woould check not the printer again. The printer is less than a year. I don't know what is happening. Can you help me solve this problem?

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Satellite Pro L10 - USB port will not recognize devices

  Hello

  I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

  Any solutions or suggestions?

  Post edited by: caddy

  I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

  I recommend you contact the service again as soon as possible.

• File Manager XP PRO SP3 will not recognize USB floppy A: drive

  File Manager XP PRO SP3 will not recognize USB floppy A: drive

  The system tray alerts "new hardware found" and "installed".

  In the system. material | Device Manager | floppy drives, the disk is present, activated and works

  If I pay BACK the drive is located and can be read and written.

  The drive is not the case in (windows explorerer file manager.

  The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

  In the removable storage service is started.

  If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

  This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

  Any ideas?

  It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

• Fuze 4 GB will not recognize the change of information tracking

  Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.

  I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.

  It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.

  In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.

  Thanks for all the help, guys, guess it was on my end.

• Can my cd-r/dvd will not recognize a blank cd to burn,.

  My cd-r/dvd player will not recognize a blank cd to burn. It will play DVDs and CDs store bought and even burn but when I try to burn one he repeats to me enter a blank cd. that I am using that is empty, I can burn one on my other computer and the game is on a fine, one I have a problem with a dell inspiron 1500.

  Hello Danielbullock29,

  Thank you for your message.  In some cases, the burners will not burn a specific brand or batch of CD/DVD.  Try a different brand and let us know the result.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Computer will not recognize Pro Duo or removable drives.

  Computer Vista will not read my Pro Duo chip, or it will show all removable drives except ROM USB where I have an optical mouse wirelesss connected (when I check my computer).  The import wizard shows only a USB where prior that he showed, f, g, h, etc.

  Thank you.

  Thank you for these two answers, unfortunately the first did not work, and the second deals with USB.  The computer will not recognize any location chip memory, they do not appear on the Import Wizard, or MY computer.  The only two drives that appear are drive C and drive J, which is where I have a wireless mouse hooked up.   Just before this problem I had... and still not... a bottom of screen message "one of the USB devices attached to this computer has malfunctioned... Click this message for more information."  The only connected usb is the mouse, and it works fine.  Solutions that deal with USB issues aren't really questions I have, except that in the future (if the problem remains) USB ports do not appear on my computer either.  Someone who has some said knowledgge I need to re - map the hard drive, or something?

  I really appreciate the time you people consume with it.  Any other ideas?

• Dell Inspiron One 2320 Nvidia GeForce GT 525 m overheating?

  Hello. I have a Dell Inspiron One 2320 I think has problems with the graphics card GeForce GT525m of overheating. 5 minutes of a game, even on the detail settings low, the temperature reached quickly 90 + degrees Celsius. The max I've seen is 96 degrees. This occurred on the first day with the computer and I rarely used it to this problem. I know there is no problems with fans and vents being dirty because I checked all and as I mentioned before the machine ran hot on the first day. Airflow behind the appliance is wide open, so I know that there is no obstruction to the air flow.

  My wife has a laptop (Inspiron 17R) with an Nvidia GeForce GT525m I've tested the same edition of the games and benchmarks on the, with even more detail settings and it reaches a temperature of about 70 ° c max.

  It seems strange to me that a GPU reaches a high temperature in such a short period of time. I have other machines (portable and desktop computers) ever approaching 90 degrees.

  Here is some relevant information on the PC in question.

  Model: Inspiron One 2320

  CPU: Intel Core i5 2400 s

  GPU: Nvidia GeForce GT525m DDR3

  RAM: 6 GB

  BIOS version: A10

  NVIDIA drivers: Tested several Versions Dell 8.17.12.7073 & Nvidia Version 306.97 not changes of temperature between the pilots, all are about 90 degrees Celsius.

  If anyone has experiences similar to this or has a solution I would be very happy. Thank you!

  Overheating was a problem with mine, I made a drastic decision. To fit 120mm fans for the back cover. Check the youtube videos on these mods.

  The cooling is normally a problem on these with many users complaining of the black screens and restart one of the videos shows how to mount the fans/vents aft to increase cooling.

  I therefore a 2320 Dell with i5 2500K (Non-Dell) quad core CPU, 8 GB RAM, 256 GB SSD, 2 TB HDD, DVD burner standard still in use via USB and mounted back cover driving fans cooling the GPU and CPU.

  Games played at max settings use to heat the motherboard to 97 degrees with the fan in place, he fell to-22 degrees to 75 c, which means that the machine not only better performance but last much longer due to the additional cooling.

  I'm using Core Temp to monitor the temperature and OCCT to the stress test.

• Inspiron One 2320 A10 BIOS update is blocked

  I'm trying to update the BIOS on my Inspiron One 2320 after replacing the hard drive. It worked fine except the fan was running full speed constantly, even after a boot after being closed overnight - so no question of real heat. Advance Google search for BIOS update being a solution to the problem of fan went wild.

  So...

  I put the file A10.exe on a bootable USB key, rebooted and ran the file. Everything was going well until I came to this screen:

  =============================

  ITE Flash Utility Version: 1.0

  Device ID; 7f9d20ff
  Seller of SPI; Chingis

  Block number: 0

  Eraseing--erase OK

  Erase check--check OK

  Programming--programming OK

  Check--check OK

  [blinking cursor]

  =============================

  And it's been sitting here just like that for a few hours now. I'm afraid to do something or to restart. I am wayyyy out of warranty, so I'm on my own.

  Help?

  You could try erasing BIOS by removing the battery motherboard button and press / hold the power button for about 30 seconds before reinstalling the battery. Check the Manual and follow the instructions carefully to remove/install the battery.

  If the battery is more of ~ 2-3 years old, this could be a good idea to install a new, so you don't have to replace it again, at least not for a long time (er).

  Are how far out of warranty you? If I remember correctly, Dell had a policy to replace a motherboard - once and only once - if it doesn't have a BIOS update within six months of the end of the warranty. Do not know if that still stands...

  So if does not help clear BIOS by pulling on the battery, you can contact Support to see if this policy is always available.

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• Why my WMP will not recognize my Sansa E260 player?

  I connect it via USB and the media player will not recognize.
  Two years ago, that he did it. I got a lot of work on my PC since then. Anyone familiar with the Sandisk players?

  Hi thomwilliams,
   
  -What version of Media Player do you use?
   
  Try the steps listed in the article below and check if it helps fix the problem:
   
  Sansa player not recognized by the computer
   
  There is an update firmware released for the Sansa Player. Download and apply the same and see if the problem is resolved.
  Sansa player not recognized do not update to firmware Sansa

• Windows 7 will not recognize my iPad

  Windows 7 will not recognize my iPad when it's connected via USB port

  Hi Richard,

  1 have you tried the steps in the post above?
  2. the problem occurs only with the ipod?

  Method 1
  I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  Try the steps from the following link (applies to Windows 7)

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Historical files Windows 8 will not recognize the new external hard drive

  I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD).  One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility  I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work.  Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD.  Historical files will not recognize this drive.  He keeps asking the old drive.  When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected.  Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it.  But the history of the files do not recognize.  WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done.  I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed.  BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately.  Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk.  But who is going to cost me an arm and a leg.

  I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two.  Thank you very much

  I was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.

  I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.

• cannot use the webcam or play dvd Windows Inspiron ONE 2320 8.1

  Hello.

  When I open My Webcam Central on my Inspiron One 2320, I get a nice message on the right hand bottom corner 'not supported Webcam. Hmmmmm. When I try to play a DVD, no luck.

  I use Windows 8.1

  I went into the Manager.Under Imaging device, there is no sign of a driver for the webcam.

  In the section DVD, States of CD-ROM/DVD-ROM HL - DT ST DVDRWBDCT40 N does not properly. When I right click to update him pilot-still no worky.

  Thank you for your help!

  Nora

  The webcam is already installed. Central webcam is software and is also already installed. Look at the illustrations in the Quick Start Guide in the list of books below and see that the camera is located on the bezel at the top of the screen has a cover and light. Remove the cover to see if that helps. If you're still having problems, go to this site to help support more-

  www.Dell.com/.../manuals