Install a Module high speed Mobile me

Similar Questions

• WWAN activation (high-speed Mobile) does not work

  Hello

  I set up a X220t in the online store. For programming reasons choose international keyboard and international configuration. For use of long date of the camera, I also choose the richest configuration especially with the map mobile broadband built-in.

  But I don't have it still works. Even when I insert a SIM card into the slot in the Toolbox ThinkVantage gives the message:

  "Your the wide area wireless (WWAN) network card is installed but not enabled.

  When I try to activate the map I can not choose the provider appropriate menu drop-down (Germany: Vodafone, T-Mobile, O2,...) There is only one service provider of the United States selectable: AT & T.

  Lenovo to ship the WWAN card with a provider lock? I saw no evidence on this point!

  How can I activate the WWAN Module then?

  Thanks in advance.

  Best regards

  Lydie

  Sorry people for the delay.

  For the record: my machine type is 4296-CTO.

  For completeness: another message, I always had when I tried to use the WWAN card was: "no SIM installed".

  I contacted lenovo support to solve the problem and they understood my WWAN card was broken.

  Then they took my laptop and after 6 days I return it with a work WWAN card.

  Many thanks to the support of lenovo!

  See you soon

  Lydie

• How to lock my network high-speed mobile 3g only?

  I am currently using acer w511 and even though I have a 3G network signal, sometimes, the signal turned to the EDGE network automatically and speed more slowly as *, so I was wondering, if there is a setting to indicate my network still locked on the 3G network only on window 8? Thanks for the help

  Hello

  Changing the settings of automatic NETWORK still locked in a 3G network is not available in Windows 8.

  You can use your favorite search engine and search application which helps you to make the necessary settings on the network mobile broadband.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• VMware Workstation, Windows 7 + Huawei (high-speed Mobile) = problems!

  Hello!

  I bought this laptop with Intel Core i7, Intel chipset and Win7 processor.

  If I install the Huawei (E220, E1750, E1550) device in your PC with Vmware Workstation they all work very well.

  After installing Wmvare Workstation these problems come from:

  1. the computer detects the device and the drivers on the cd player emulated the unit and install.

  2. the computer, unplug the and then finds the unit and looking for drivers (never find anything, but still to try to find for hours). Now, the computer won't let you reboot/shutdown. (Only by pressing the powerbutton will stop it)

  Restarting the computer restarts 2 allover.

  Uninstall all the drivers again 1, then 2.

  Uninstalling Vmware och disabling usb vmware service does not solve the problem.

  System rescue using the computer justlike it was before installing Vmware Workstation unity functioning well again.

  But after the relocation of Wmware Workstation problems are back.

  I have updated bios, drivers for usb (even tried the General usb driver) without success... The device worked under an emulated xp computer, however when I tried it. Please help me.   Jonny!

  do you need a USB support for your virtual machines?

  You might want to uninstall the USB services using VMware and then install the Huawei device?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Super High speed internet Time Warner installed (50mbps) but foxfire operating only at 1.35Mbps, while the internet Explorer works fine

  Internet (50mbps) Time Warner installed high-speed yesterday on my computer, but when the guy left I noticed that the speed was very slow. SIS one test on speedtest.net and found I was getting a maximum of 1.35mbps (sometimes as low as .62mbps). So I had them come back and they tried all kinds of things, only to discover Internet Explorer gets 50mbps, so it's something with Foxfire. What would it be?

  Hello, when you use speedtest.net or a similar site based on flash to measure your connection speed, it could be a problem with the protected mode that adobe has implemented for its flash plugin for firefox. Some older versions of f-secure or report of trusteer are known to cause slowdowns with flash, or it could be something similar on your system that interferes (maybe security software that block/sandbox the container used for protected mode, etc...).

  as a solution, you could try downgrading of 10.3 flash (which is always supported) or Disable protected mode & see if that makes a difference.

• Working with USB high speed Interface Modul 2.7 in LabVIEW

  Hello

  is there an example works with a USB high speed Interface Modul 2.7 in LabVIEW?

  The EGG is a "Cypress CY7C68013A-56PVXC»

  Thank you

  Best regards, patrick

  Hi patrick,

  I searched on google for the module. The manufacturer is Braintechnology.
  If you need a LabVIEW driver ask them please, maybe it's that they can provide you with a.

  Braintechnology offers a DLL - USB. With a little work, you can include this dll in your LabVIEW project (call library function node).

  The following documents explain how to:

  Integration of external Code with the Shared Library Import Wizard (requires a corresponding header dll)
  http://zone.NI.com/DevZone/CDA/tut/p/ID/2818

  Writing Win32 dynamic link (dll) libraries and qualifying of LabVIEW
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4877

  Example: Passing a variety of Data Types in the DLL for LabVIEW
  http://zone.NI.com/DevZone/CDA/EPD/p/ID/1288

  Kind regards
  N. Ralf
  NIG.

• Internet high speed decreased after installing Windows 8.1

  Dear guys, I installed Windows 8.1 on my laptop HP Pavilion G6 2241sa.

  Everything is perfect, I downloaded all the drivers, internet works fine BUT I noticed that the speed of my broadband a few minutes down from 80%. My broadband speed is 30meg to bottom/30 megs.

  Download speed is reduced to 2-3megs, but upload speed remains the same...

  My Network (displayed in the Device Manager) card is AR9485 of Qualcom Atheros 802.11b/g/n wifi adapter.

  When I uninstall, Windows automatically detects and installs back. Internet high speed returns to normal, but after a few minutes or maybe 10 12 minutes speed drops back down, until the speed remains unchanged... I removed it 10 times, even tried to reinstall all the ralink drivers for win 8 or Win8.1, but Windows says I have the perfect driver and that it does not install anything else. I removed just in case antivirus, does not work. I checked the speed on the other computer - no problem there, but on my laptop it persists. On Windows 7, I didn't have this problem, it started after Win 8.1.   If you could please help me fix. Thank you very much. Lives

  OK, this is my last post on this topic because I think I solved the problem.

  I thought it was Windows 8.1 to blame, but I finally installed Windows 7. Internet was excellent, but after I installed all the latest drivers of the site Web of AMD (Amd catalyst, video driver, etc.), down speed was limited to 2 to 2.5 Mbps.

  I used the system restore and Internet working again. I decided to check again, and after that I installed again the pile of last softward to Amd, I had problem once again. Prolem is therefore up to the latest version of the AMD software. Do not know exacctly what part, perhaps things like AMD stream or similar. I also believe that this issue includes my modem that does not like to communicate with my computer that has these last things AMD.

  Anyway, thanks for reading. My internet gives me full speed and I am happy with that. I just create a system restore point before updating to new drivers from the site Web of AMD. It's easy to go back. A big thanks to everyone! Lives

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• is it possible to install USB HIGH SPEED HOST CONTROLLER DRIVER to ONE OF MY USB PORTS to RUN MY CAM AND webcam

  I have Dell Optiplex gx 150 intel pentium 111. Windows xp pro service pack 3. I get a baloon saying there is no port high flow installed on my pc, now I need material or the right drivers to make it work properly. ICAN get my cam digital to work, but I get the ball, saying that I have to install the drivers of controllers host high speed to do my camera to work faster. Now the webcam does not light but I do not get a pic and it gets the same ball to get a host controller driver high speed to make it work right. So I need a piece of hardware or just the drivers on my very old but the pc work great. Please try to answer this question in advance.

  Hello

  You can update the drivers for this chipset. Contact the manufacturer of the computer and check.
  Also, check the link below:
  Support USB 2.0 in Windows XP: finally high speed
  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  I hope this helps.

• zbook u15: fan at high speed after installed windows 10

  Yesterday, I updated to windows 7 pro for windows 10 pro.  I have rarely heard my fan in windows 7 and only when I was cad or had a large number of open images.  With 10 windows, my fan is at high speed all the time.

  Suggestions?

  Ok

  Found two programs running that caused the fan to high speed.

  One was post 2012 31% of the processor chips

  other was

  AlertusDesktop or 32% of the processor.

  E-mail private, removed the Alertusdesktop for now and normal operation.

  Thank you!

• NEITHER 9213 changing high resolution at high speed. Screenshots included.

  Hello

  I have a card 9213 in a CRIO-9074. My sampling rate is exactly 1 s/s, which means that it is running in mode high resolution. However when I go in the project window and change it to high speed (as indicated below)...

  

  nothing happens. Remainders of 1 s sampling rate / s. below you can see my labview vi, which is a timed loop. The period can be changed in the loop is only how many samples I trace on the graph. And as you can see on the graph to 100ms graphic flatlines as the 9213 is not updated of its value.

  

  Below you can see the record of the following data and it shows that the sample time is exactly 1 s/s.

  

  So, how can I actually get my 9213 OR change of 1 s/s mode high resolution at the 75 s/s, that it is rated for mode high speed. For this initial Setup, I use only 1 thermocouple, but once I get the included sample rate I'll add more. It should also be noted that I rebooted the computer and the Committee for the acquisition of data several times.

  Thank you.

  I noticed that in your project beside the cRIO, he says "in time real features not available."  According to another thread, I found, it was because the module time real wan not properly installed:

  http://forums.NI.com/T5/FieldPoint-family/real-time-features-not-available/m-p/954231

  Also, when I recreate your project settings, if I right click on the 9213 module I the ability to "Deploy" or "deploy all.  Deployment is expected to update the settings.

• Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

  Hi all.

  We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
  Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

  I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

  In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

  At any one another experianced this problem and what was the resolution.

  Thank you very much

  Jonathan Davies

  Hello

  As far as I know additional drivers are not really needed to use the USB ports.
  This is why I m wondering why don t USB ports work.

  It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

  So maybe it s a software problem.
  First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
  After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

  Keep high speed Port Replicator III connected to the computer and restart the device.
  Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

  I hope that the USB ports don't work after this short workaround solution.
  Keep your fingers crossed.

• Need driver USB high speed for Satellite Pro A10

  I currently have a conflict with the USB port of my laptop da. When I plug a USB device, I get the message that no USB high speed drivers not installed. I had a quick glance in the section download under USB for Satellite Pro A10.

  Please advise where this driver could be found.

  Hello

  What operating system is preinstalled on your laptop? I assume that the Os is not preinstalled with original recovery image. Can you give us more information on this subject?

• Fans always operate at high speed after power failure

  HP Pavilion Slimline S5780T - Windows 7 Home Premium 64-bit

  After a power failure a night or more recent, our Pavilion Slimline case fan and CPU fan have both run at high speed all the time, starting from the system. The level of noise is intolerable.

  I opened and cleaned all the dust from the inside of the case, including the removal of the heatsink from the CPU. Everything is clean.

  I ran the following HP Vision diagnostic, test the system, including fans. During the test of fan, the fans ran at 100%, then fell to the former level normal, quiet, then ramp back up to 100%. So says HP fans diagnostic tests are OK when there is always a problem. And it is possible for them to run at slow, normal speed.

  I installed the free SpeedFan utility, but there is not place to adjust the fan speed manually.

  How can I find the problem and the fans run at normal speed, as they did before the power failure? Everything that controls the speed of the CPU fan and the fan is broken.

  Thank you and best regards,

  Stephen - Myrtle Beach, SC

  Strange things happen when power flucuations or failures occur.  Most probably the motherboard has been damaged by the PPE and that is normally not as repairable by a DIY.  If you could find a newer BIOS, that to solve the problem.  Since there can be no more recent BIOS, try to remove the battery from the motherboard for the night and then put the file in and reset the BIOS to see if that helps the default value.  Otherwise, it might be repairable.

• Ports high speed USB Equium A100

  I installed a webcam Advent (before exchanging it for a better creative). Part of the installation process involves installing a Microsoft's USB controller. (OS is Windows XP Home Edition). I uninstalled the ADVENT software when I got back to the webcam.

  Since then, I started getting messages every time I plug a USB device, on a device high-speed, requiring a port high speed.

  When I look in Device Manager, I have two sets of Bus USB controllers:

  One includes 2 standard OpenHCD USB host controllers, 2 USB, 1 support 2 USB hubs and USB printing composite devices. Their drivers are dated 2001.

  The other includes 1 class PCI USB 2.0 enhanced host controller and USB Root Hub Device 1. Their drivers are dated 2006.

  I have 4 USB ports and all seem to be using the first series of USB controllers. If I disable one of the controllers, then various USB devices stop working.

  As my laptop is only 18 months old, I would have thought that all USB ports are 2.0 version?

  How can I 'forcing' the laptop to use the second set of controllers?

  Hello

  I think that the biggest problem, it is you would waste more time to fix such a driver related issue then just entering the recovery CD and performing a recovery of your entire system.

  Perhaps the fastest way to put little life back to your ports USB 2.0 high-speed. Otherwise, I had suggested to remove all ports from the Device Manager and let windows after a restart re-install all the drivers, but before perform the reboot it would be better to manually remove all THE drivers installed previously.

  Maybe it helps, but if not he would have definitely better to perform the recustomization...

  Concerning