install app via usb error on first installation poster

Similar Questions

• Cannot install updates for WIndows - error 80070490 and installation disc?

  original title: error 80070490 and installation disc?

  Dell, Vista, x 64 laptop.

  I can not install updates, including Service Pack 2 and IE 8. I managed to fix the other error messages, but this one is a winner.

  I can't follow the steps here because I don't have an installation DVD. The laptop doesn't have a CD/DVD-ROM internal drive and did not come with a disc because everything was preinstalled. Even if I had a disc, my computer does not recognize the CD/DVD-ROM external drive when it is plugged in (a problem at a time!), so it would always help. "The System Update tool does not work on this machine, probably because of that pesky little" compatible operating systems: Windows Vista Service Pack 2 "requirement. I so need SP2 to download the tool which will allow my computer to install SP2? Nice little catch-22 there. I agree with the irony. I disagree with not being able to install updates at all, ever.

  Is it possible to re - install without a disk? Can I solve this problem at all or I'll have to take the laptop to Best Buy and ask them to do some voodoo Geek Squad to it?

  Hello

  Check if your computer has a recovery partition.
  If the computer has a recovery partition, use the recovery partition to restore the computer to factory settings.
  Note:   All programs and data will be lost.  You can make a backup of all important data and reinstall programs.

  You can also contact the manufacturer of your computer, and asking for a disc.

  Windows Update error 80070490
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  Please note: you must have a disk for Installation of Windows Vista with Service Pack 1 integrated in to perform an upgrade to your computer, like your computer with Service Pack 1.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: Run a repair installation will not damage files and applications that are currently installed on your computer. However, I suggest you to save all the important date of the computer before you perform the upgrade on the spot.

  Thank you

• Error message "a required CD/DVD driver is missing" - install Windows7 via USB

  So I recently built a new office because my laptop fried itself, and I ran into the famous message "drver cd/dvd required is missing."  I tried many solutions to internet: change SATA AHCI, ATA, IDE; starting with only the hard drive; and the solution that works for 95% of the population: pulling out the USB and insert into another port to the Welcome screen.

  Nothing has worked.  I have downloaded the drivers for my motherboard out of their Web site, uncompressed them and put the files on the USB key.  The drivers are not yet recognised because they don't show up in the "Scanning for drivers.

  I used the tool Windows 7 USB Installation and WinToFlash to make the USB bootable, nor work.  I have my USB drive plugged into a port DAC - UP, because I read that Windows 7 is not supported with native support for USB3.0.

  Please help me!

  Well, I just fixed this problem.  I found a Youtube video on this specific issue, and he said that the non-existent USB3.0 support was to blame.

  I followed the video, mounted the USB3.0 drivers to the boot.wim and booted up my office as usual.  This time, he spent the error message and let me install Windows.

  I am so happy.

  EDIT:

  Video link for anyone else having this problem

  https://www.YouTube.com/watch?v=yd37BJwTxiM

• Adobe Muse install problem April 2014 - errors encountered during installation (7).

  ERROR: installer of third party InstallAdobeMuse.exe payload failed with exit code: 7

  This is the 3rd time I've lost my installation of Muse. Yes, the app has simply disappeared. Uninstallers can't find it. A search cannot locate all the files. He has simply disappeared from my computer. When I try to reinstall through CC Desktop App, I get the "ERROR: load capacity of third-party installer InstallAdobeMuse.exe failed with exit code: 7" message. Yes, I was connected to Adobe for attempts. I downloaded and used the Adobe cleaner to clean the app, but since there is no application, there is nothing to clean up. I turned off anti-virus and firewall, but will not be installed. Failed to install 53%, 80% and 93%. Other applications (Illustrator, CC, etc.) work fine. Is it a problem with Windows install?

  Here's help with problems of code 7, http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html

• Unable to find the device id / install app via command line after ios6

  After I updated my ipad to ios6 I don't think the device for IT id... IDB - devices do not return any found devices.  I can see the ipad in Explorer windows etc, but it is not detected and therefore I am unable to install my application...

  Everyone has the same problems?  Workaround solutions?

  Thank you

  Bobby

  Could you please check if the devices are discovered in your iTunes. If the devices are not detected in iTunes, then update iTunes to the latest version. I hope this will solve your problem.

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Smartphones blackBerry Apps via BB Desktop Manager installation error

  I get "Invalid Configuration" error every time I try to install applications via BB Desktop Manager. The error tells me that the device has no storage enough for my selections. Here is the screenshot of the error, when only 1 app is checked for installation:

  

  The machine is new, OTA setup work, and there is a lot of storage space.

  Info on the device

  Carrier: Maxis

  Model information and the version of the OS: Curve 8520 on v4.6.1.286

  Apps and free space

  Free file before and after a battery to remove/replace:

  Front - 104604061 bytes (100 MB)

  After - 120812353 bytes (115 MB) [deleted an application before the reboot].

  A battery pull fix your problem?

  N ° same error has occurred.

  (OTA) installed applications and their versions:

  Messenger of BB - 5.0.1.38

  Facebook - 1.7.0.22

  LinkedIn - 1.1.0.0

  gTalk - 2.5.32

  BlackBerry App World - 1.1.0.33

  Enhanced Gmail Plugin - 1.0.0.59

  Can someone help me out here please?

  Problem solved. Updated BB Desktop Manager for BB Desktop Software and applications can be installed on the wire.

• to start installation of creative cloud moves a little but then it stops and it says error copying a significant repertoire, 43 key error, I need help I want to install the trial version of adobe first pro, I use a pc windows ultimate

  key error 43, I need help I want to install the trial version of adobe first pro, I use a pc windows ultimate

  Error 43 https://forums.adobe.com/thread/2070909

  Also, is your Windows version required 64-bit?

  -http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• HP Photosmart B110: cannot install drivers, USB error message

  Hello! I'm stuck installing the software/drivers for my printer.

  I bought a new computer and everything worked fine until I tried to install the printer. I get this error message, and I can't move, so I can't use the printer

  This is a screenshot of the Setup error:

  

  It's strange and I don't think it's really a problem of USB, I have many more devices connected via USB and printer is the only one that gives problems. I also tried to plug it into all possible USB of my motherboard without result.

  I also downloaded the drivers up-to-date for my motherboard, I've even updated the BIOS to the latest version, without result.

  I can see the printer detected from the control panel of configuration/printers, but he said to the drivers installed.

  I'm out of ideas... I don't know what to do, please help >. <!

  Thank you!!

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• HP Deskjet 6980 will not install via USB or network

  I've recently updated my PC with a new mother/case/CPU card, etc. and trying to set up my Deskjet 6980 he tries to install two separate drivers.  One is named HP Deskjet 6980 DOT4USB and the other just HP Deskjet 6980.  Dot4USB installation is complete, however the drivers for "Hp deskjet 6980" fail.  The printer indicates only in my "devices and printers" as "HP Deskjet 6980" with an icon of troubleshooting.  whenever I run troubleshoot it tells me I need to install the drivers.  He's trying to install the drivers through troubleshooting or Windows Update every time, she fails.

  I tried to uninstall all instances of the name Deskjet from my computer, turn off the printer, restarted my computer and then turn on the printer/plug again for the same results.

  I plugged my printer on the network and while my laptop has no connection/printing problem, when I try to add it as a network printer in "Devices and printers" it gives me an error message saying "unable to install.  "Double check the name of the printer and make sure that the printer is connected to the network.  I tried both options "Use the driver is installed" and "replace the driver" and both give me the cannot install message.

  Some tips on what might be the problem or how to fix?  I downloaded each item including HP Deskjet 6980 on site without success.

  Windows 7.  As mentioned, the printer works perfectly when connected to my laptop via USB or wireless connection, my PC just does not want to connect via either.

  HP Print & Scan doctor tells me that I must not get the installer of your website, however there is no installer for Deskjet 6980.  The "Printer Install Wizard" & "Hardware diagnostic utility" mean that the printer is not supported by the software.   When I plug in the printer it goes through the process of installing driver as follows:

  

  I tried the update through troubleshooting, Windows Update and even to get the file on the Microsoft Web site (pg no longer exists). I thought about trying to find the driver on my laptop, but I'm not sure the actual name of the file what.

  * EDIT *.

  Looks like I solved the problem myself.  I don't know why, but my printer has appeared only at random in my Uniblue DriverScanner program (it would not be displayed when I looked before).  I was able to download & install from program Driverscanner and my printer works perfectly.  A strange question, but at least it was an easy fix.

  Thank you.

• Satellite L50-C-215: failure to install Win7 via the USB port, pb and toshiba.bg bug ' workshop

  Satellite L50-c-215 is a laptop sold without optical drive or OS.

  We bought it today.

  
  Questions:
  -We were told "it is compatible with windows 7", but what a salesman said, everything can be downloaded from the Web from Toshiba site
  -While watching the Web from Toshiba site, a link says 'no system operating inside'. Link is corrupt
  -2 "official" companies are listed for the Bulgarian Web from Toshiba site are wrong: nobody told on the phone that they are not official support from Toshiba

  
  Technical questions:
  -J' tried to put several Windows 7 ISO on a USB key, using the official Microsoft tool and Rufus, but I got error that says "CD/DVD Driver is missing."
  -In some forums, it is said that test the spirit of the thing that a USB 2.0 can solve if USB 3.0 will fail. Each USB failed.
  
  Sales question:
  -Although the European commercial law says people have a little more time to restore a non-working product and be reimbursed, when we returned to the computer at the Technopolis shop a few hours after the purchase, employees told us ' problem is not hardware: we do not cancel the sale, we can take over the computer and give your money. " "Problem is software: see with Toshiba.
  The best we could get was the address of a computer service non-Toshiba to try to ask if they might be able to install Windows 7

  
  I already spent half a day working on it
  What can we do to install Windows 7 or get the computer returned and refunded?

  Tried Tnings at night:

  -> Intall Ubuntu 12.04: card WiFi can't work, no Ethernet cable to update from the Internet

  The drivers are on the website of Intel, but solution install require packages to download on the internet, not USB

  -> Last Debian version: error starting in the command line

  -> 14.04 installed, Ubuntu box checked during installation to use the Intel Wifi device
  Re: software WiFi cannot connect. Spent a few hours on forums to try to understand how to install the Intel USB drivers. Does not work.

  For people who want to buy this model, try to get a player of optical disk to install Windows, a good cable to Linux, update or be prepared to spend time and money for the service simply be able to use the computer.

  Oh, another thing: Technopolis company is not able to provide you with enough information before buying a product. I will not say that they rip off, but almost: especially to overseas buyers, buy refusal refund to anyone who is not able to have an argument that was screaming in Bulgarian with them.

• Cannot install laserjet pro p1102w printer, usb error, please help?

  I was able to print things in the past using the USB of my printer. After I reformatt my computer, I tried to plug in the usb from the printer to the pc, the usb will not be installed, it has an error message that it could not reconigze the computer or something, I have a triangle of yellow warning next to the serial bus controller universal usb. I tried the update, but it cannot update, I tried to plug and plug it into the usb, I tried manually install printer in devices and printers, and yellow triangle still in the pc. Please help, I have a home edition of Windows 7 64-bit. And I recently change my network wireless after reformatting, but that any prior to reformatting, cause I have change the wireless network and still able to print, but after I can not format. Help, please

  Hi cowmanchess,

  It seems that you are having problems with your USB port on the computer.

  Have you tried using a different USB port on the computer?

  Have you tried a new USB cable?

  How long is the USB cable you are using?

  You have a USB hub between the printer and the computer?

  Unplug the USB cable and then download the software on the link below. Wait that the installation of the software requires you to connect the cable. Let me know if you get the printer installed?

  Driver and software of HP LaserJet Full Feature

• I am installing a photography software, but I got a message error that says "windows version Basic 3.0.0.0must be installed in the Global Assembly Cache first".

  Error windows version Basic 3.0.0.0must be first installed in the Global Assembly Cache

  I am installing a photography software, but I got a message error that says "windows version Basic 3.0.0.0must be installed in the Global Assembly Cache first". Help someone!

  Try to download and install the .NET Framework directly from Microsoft.  If you have already installed a version and get unsuccessfully with the update - you may want to uninstall the installed versions and the installation later.