Install codecs without the drive

Similar Questions

• I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD

  I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD

  Hello

  What is a model supported by your version of Windows? You could just plug it in and see if Windows recognizes
  and they get the drivers off of the internet. Although it is recognized that you should always check the manufacturer's website
  new drivers and control software.

  Check with the site of the manufacturer of the camera brand and model you should be able to download the necessary software.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have 2 computers in my limited internet organization.  How can I install and activate the drive on these computers?

  I have 2 computers in my limited internet organization.  How can I install and activate the drive on these computers?

  You can try to use the full drive offline installer from

  http://get.Adobe.com/reader/Enterprise/

• How can I re - install vista without the disc, because I only have the key encoded on the computer.

  How can I reinstall vista without the disc and remove windows 7 (an illegal version) also without the disc. I have only the original vista coded key stuck on the computer when the vista system installed on the purchase of the computer. My daughter was not happy with vista and had someone to install windows 7, which turned out to be an illegal version.

  Hello

  If you have a recovery partition likely has been cleared by installing Windows 7.

  You can try the recovery partition, no guarantees.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Re-install Windows without the original disk Windows 8.1

  Hello

  I use windows 8.1 right now, I need to reinstall the windows and doing it is another. I don't have the original windows disc. Is it possible to reinstall without the disc?

  In this case, you can reinstall Windows 8.1 by downloading and using ISO images from the link below provided that you already have the product key for your version of Windows:
  https://www.Microsoft.com/en-us/software-download/windows8ISO

  Once you have downloaded ISO image and created the installation disc, you can reinstall Windows following the instructions mentioned on the link below:
  http://Windows.Microsoft.com/en-us/Windows-8/clean-install

  Hope this will help you.

• I have a disc to install my adobe acrobat xl level but my habit to drive door open.  How can I install it without the disc in?

  I have a standard xl adobe drive but my habit of door open disk how can I install this with my serial number without putting the disc in?

  Hello

  Please see the link below for download: -.

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

• T430 install W7x64 without the CSM support

  Hello

  I'm trying to install windows 7 x 64 on a Thinkpad T430 without CSM (UEFI-> BIOS compatibility layer) because W7 is supported, but when I boot from the installation loading disk.sys DVD Installer blocks. I have try to disable the AHCI or other settings related to the discs, but nothing happens, I guess it's a bug in the UEFI!

  
  

• Install drivers without the software fingerprint reader?

  Since my last question has been answered so quickly and so well I thought I'd try one more.  Are there any drivers to install just the device without additional software, fingerprint reader that comes with it?  I do not want to use the fingerprint reader, but don't want a device not recognized in Device Manager.

  Thanks for any help.

  1. you can extract it with winrar or 7zip setup32.exe.

  2. to disable finser scan from the bios-> Security-> access e port / s-> Fingerprint reader-> disable.

• How to install updates without the disks when he asks?

  I am trying to install an update for Microsoft Word 2002, which is preinstalled on my computer. I did not all software on the disks when I bought the computer again. I have the certificate for Windows which accompanies it.

  In the installation of the update for Word, he gets up then invites me to insert the disk for Word because he needs a certain file. It is rather impossible for me to do.

  Any suggestions? Thank you

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your Word question in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with installing windows xp the drive mounted iso in windows 7

  Hello everyone, I am currently using Windows 7 and I would like to install Windows xp. However, I do not have a CD player, so I just have to install the .iso files. When I mounted the image Poweriso .iso file and run the installer there, he opened a window with a few options to choose. And I was surprised to see that the option "Install Windows XP" is grayed out, which means that it is not available. Can someone help me to activate Setup option to install the OS?

  You can see the screenshot here: http://www.mediafire.com/?h6v5l3qnx6mfvt8

  Thanks in advance for your help.

  Best regards

  Mar

  Hello

  You cannot boot from the iso mounted, you must have iso burned to the disc.

  Thank you

  Nitin Aswani

• WIRELESS MOUSE NOT WORKING - MSG I GET: Windows Update configured to never install drivers. The driver updates are not installed automatically when detected by Windows updates.

  My laptop does not recognize my wireless mouse more and this is the msg I get when I solve the problem.  I uninstalled Windows 6.1 and installed an update of Windows which was supposed to solve this exact problem, including the problem that started the same thing of my laptop does not start correctly.  It takes a long time to come - fans and all start, but take apx 4-5 min of kick.  Every once and a while I get all workers through troubleshooting or by doing a restore - then as soon as you close it down he 'forgets' that you did and the problem is there once again. Help!  FYI I AM COMPLETE COMPUTER MODEL and do NOT know my way and a lot of terms, so be nice and treat me like a child!  TYIA!

  Hello

  1. What is the brand and model of the mouse?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Pease follow the steps from the link to configure windows update to install the drivers.

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

• How can I install CS4 without the disc?

  I tried to move the files to an external hard drive to my new computer, but I can't find how to get the programs to work on my new computer.  I have the old computer with the right to work here beside me CS4 and I disabled the CS4 on the old computer, but when I try to open applications on the new computer, it gives me an error stating that the license has expired.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

• How to install it? The drive seems to install but never asked a serial number.

  I bought this on black Amazon Friday last and never installed until I got a MacBook and the box says Adobe Photoshop Lightroom 3 for Windows and Mac OS.  There was only 1 disc inside and it was shrink wrapped so I guess it's authentic Adobe as I got from Amazon.

  Clues?

  Thanks, Bunnie

  Bunnie,

  If I remember correctly, LR don't ask serial number until you try to run the program.

  In all cases, you'd better download the latest version from here, install it and use the serial number that took the form of the Amazon region. It is a 'free trial' download, but once you apply your serial number, it becomes the standard version.

  HAL

• HP Pavilion DV6 2110ea: can I install WSSD alongside the drive in Computer Entertainment laptop HP Pavilion dv6 - 2110ea

  I want to leave my old HDD (1 TB) and buy a little extra (maybe 256 GB) SSD, but I read that it is not indicated (apparently existing) slot that is apparently designed for a TV tuner?

  It's true. The possibility of using a WSSD began only with Intel 3rd gen processors and yours is 1st generation. You see the slot looks like a general pci-e slot, but it is probably specialized for a (cell) WWAN card only.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Envy of HP dv7-7332ea: having problems to install the driver of HP wireless button

  Hi all

  I would really appreciate some help here. Recently, I did a factory rest on my laptop dv7 HP Envy but can't reinstall Windows 10.

  Before doing this, I was told that I need updates of Windows 8 to 8.1, and then to Windows 10.

  However, I am unable to Al of Windows 8 to 8.1 Windows I'm not all the drivers installed.

  For some reason, I am unable to install the driver of HP wireless button. Whenever I try to download through Windows Update in Control Panel, it downloads and after installation displays an error code 80070436.

  I am unable to get this driver installed and therefore cannot be updated to Windows 8.1. I tried to update to 8.1 without the driver, but my laptop is restarted it got stuck at 82%.

  I would be grateful if someone could give me some advice or help get this sort I seem to keep hitting a brick wall.

  Thank you very much

  Ian :-)

  You are the very welcome.

  You will be able to install W10 directly without the need to spend any other OS.

  I did it several times already, so I know it works.

  Twice on nine discs in a solid state on laptops that had previously been W10 on the old mechanical hard disks.