install deskjet 3050 without cd

I can't find my CD to install my deskjet 3050 what can I do to install it without?

Here is the link to download the star driver full compatible with Windows 7 for HP Deskjet 3050 all-in-One Printer:

http://ftp.HP.com/pub/softlib/software12/COL34584/al-85606-3/DJ3050_J610_231.exe

If you want to install it on any other operating system, please see the following link and select the appropriate operating system:

http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062 & LC = on & CC = US & DLC = in & sw_lang = & Product = 4066452 #n187

Tags: HP Notebooks

Similar Questions

  • Can I install the printer HP Deskjet 3050 (J611 series) has on an Acer Aspire one notebook without the disc

    Can I install a printer without the software disc? I have an Acer Aspire One 722 who doesn't have a hard drive. I just got an HP Deskjet 3056 A (J611 series) that only shows set up with a disk. The laptop has Windows 7 Home Premium - 64 bit OS - 2 G. Is there a way to download the software & configure the printer? I'd appreciate any help I can get. Thank you.

    Hello

    Yes, please download driver from following link (note: same for all):

    http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodTypeId=18972&prodSeriesId=4311836

    Kind regards.

  • Install HP Deskjet 3050 a. computer indicates Microsoft XPS Document Priter installed. Then whil

    After you have installed and try to print, the computer shows printer not found.  When looking at, only Microsoft XPS Document printer has been installed.

    I'm glad that you were able to understand.

    Don't forget your Deskjet 3050 a printer can connect to a network without wire using either WPS (Wi - Fi Protected Setup) or to convert a USB port, wireless installation.  See Page 31-35 of your user manual.

    http://h10032.www1.HP.com/CTG/manual/c02853536.PDF

    1. change a USB connection to a wireless network connection.

    • Install the printer using the USB cable.
    • Switch from a USB connection to a wireless network

    1. from the computer start menu, select all programs or programs, and select HP.

    2. Select the HP Deskjet 3050 a J611 series
    3. Select Printer Setup and software selection.
    4. Select convert a connected USB printer wireless. Follow the instructions on the screen.

    2 requires WPS (Wifi Protected Setup) router WPS.

    • The push-button (PBC) method

    1. press the Wi - Fi Protected Setup (WPS) button on your router.
    2 hold down the button on the printer wireless until the wireless light blinks. Press and hold for 3 seconds to start the WPS button.
    NOTE: the product starts a timer for about two minutes when a wireless connection is established.

    • Method of Menu Settings wireless

    1. press the button on the printer to display the wireless wireless. If the printer is printing, in error, or to perform a State
    a critical task, wait for the task has been completed or the error cleared before you press the wireless button.
    2. Select settings in the screen of the printer wireless.
    3. select Wi - Fi Protected Setup in the screen of the printer.
    4. If you have a Wi - Fi Protected Setup (WPS) router with a WPS button, select the button, and then follow the instructions on the screen. If your router does not have a button or you are not sure if your router has a push button, select PIN and then follow the instructions on the screen.
    NOTE: the product starts a timer for about two minutes during which must be pressed the corresponding key on the network device or router PIN needs to be entered on the router configuration page.

  • How to install my HP Deskjet 3050 (J610 series) in my Mac Air of 2013?

    I just bought a Macbook Air (I think the OS is 10.8.4). Is there a way to install HP Deskjet 3050, J610 series, without the CD? In the HP drive, it specifies the MAC 10.5 and 10.6 MAC versions...

    Of course

    Download and install the software below. Remember to select the recommended when installing HP software:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-108373-1&cc=us&DLC=en&LC=en&OS=4142&product=4066452&sw_lang=

    Once you're done, restart your Mac and run the software update to ensure that drivers are perfectly up-to-date.

    Shlomi

  • Cannot install HP Deskjet 3050 a using USB or wireless.

    I tried to install a printer HP Deskjet 3050 a on my computer recently.

    After inserting the CD her usually install page appears. When I choose to install the printer through the USB port, the program continues normally until it beginning to insert the USB cable.

    Having said the computer software does not meet attaching me the USB cable, just on the same window.

    When you try to install the computer over the network, it starts to check the network environment and will then pass the same window as before, indicating that I need to insert the USB cable.

    My USB ports work correctly, but the computer address to find the printer.

    I have a Dell Inspron 530 with Windows Vista Home Premium 32-bit.

    Hi Silvuss,

    I would suspect im a defective USB causes such behavior, such as cable used to direct connect also although it is used to establish the wireless connection.

    Please make sure that the USB port was not plugged launcing before installation, enter the control panel > printers and ensure there is no Deskjet 3050 a icon exists. If there is such a, delete it by clicking on the icon, and restart the PC, then try following the installation again.

    In addition, make sure that the USB port is not longer than 2 - 3 m long, directly plugged on the ports of the PC and not through USB hub or extension that will reduce its power.

    I also suggest that you try another cable and see if that can help you.

    A last suggestion, make sure that the CD and Printers lists the exact model as it must contain eighter HP Deskjet 3050 has or J611, make sure that there is no difference that its previous model have a similar name (Deskjet 3050 J610).

    Hope that helps,

    Shlomi

  • HP Deskjet 3050: Problems installing ink cartridges

    I have a HP Deskjet 3050 all-in-in-one J610 series. I purchased & installed a black cartridge 61 and see the message on my printer: "authentic black HP print cartridge installed - ok. However, when I try to click on the button next to 'ok' nothing happens. I try by clicking New, or the one above (as in, maybe I clicked on the wrong button), and I turned my printer and turn it back on. Nothing changes. I'm unable to complete installation of ink cartridges and print anything.

    Can someone tell me what is the problem?

    Hi @TwoCharacters

    It's almost that the Ok button is not responding, or only works intermittently. You took the message of cartridge which means it must have admitted you pressed OK. What happens if you just keep trying to press OK, maybe try a little more pressure when you press it, or hold down the key longer than you should have to. Looks like it may be a hardware problem, you may consider giving us a call.

    If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

    HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

    I hope this helps.

  • DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

    1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

    2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

    3. When you click on the ' details button it shows
    "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

    4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
    a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
    If I reinstall the same mistakes, as shown in the 2. and 3.

    5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

    6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

    7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

    I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
    MicrosoftFixit.ProgramInstallUninstall.Run.exe
    Running to check installation problems showed a list of programs to check installation problems.
    But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
    not be fixed.
    If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

    8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

    9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
    Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
    The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
    This service runs, but does not seem to be enabled.
    It adds a controller service background that adjusts automatically to
    run. Delay the start of this service is possible thanks to the function
    Manager. A scheduled task is added to the Windows Task Scheduler in order
    to start the program at various times demand (variable hours of work
    Depending on the version). The software is designed to connect to the
    Internet and adds exceptions to Windows Firewall to do this
    undisturbed.
    Scheduled task
    hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
    Service
    hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
    Boot file (user run once)
    hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
    Windows Firewall enabled program
    hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
    Check "Windows Task Manager" for example by running the command line
    Schtasks.exe
    or to run GUI
    Start taskschd.msc
    did not show anything about this service I can say.

    10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

    See:
    https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

    1 - run
    rundll32 printui.dll/s/T2
    (this from the cmd.exe command line)
    2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
    3. - click on the button ' Add... »
    4 - click on the button "next".
    5 - automatically activated for example is 'x 64' '.
    6 - click the button "next".
    7 - click on the 'Have Disk' button... »
    8 - fill the printer Hewlett-Packard CD-ROM drive letter that
    should be in your computer
    For example
    D:
    9 - who will install the printer driver 3050 J610 and display it in the list
    10. - click on the 'Start' button of Microsoft Windows
    11. - Select from the list of "devices and printers".
    12 - if the printer 3050 J610 appears, right-click on it and select
    "Troubleshoot", if not right click, "Add a printer", make sure that
    your printer is on, and then select the printer 3050 and let
    It installs.
    13 - run the first fix to get the printer driver
    14 - run the second fix to make the printer the default printer
    15. - successful on Microsoft Windows 7 Professional execution

    (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

    12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

    13 - tried to run pnutil.exe

    Because I managed to install the * printer driver (but not the * scanner driver) using the command
    rundll32 printui.dll/s/T2
    I was looking for a similar solution method for the scanner.
    So tried for example
    RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
    but which failed with the error "failed to install".
    Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
    then right click on the file name and select 'install' in the list, but that showed a dialog box
    "Install error - the INF file selected does not support this method of installation".
    Then I found this link:
    https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
    who suggested using the Microsoft «pnputil.exe» program
    After inserting the installation CD original HP located in D:
    and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
    which is present by default on this HP CD,
    and by running this command:
    --- cut here: begin --------------------------------------------------
    d:\ Tuesday, May 30, 16 16:32:33 > pnputil
    Microsoft PnP utility
    Use:
    ------
    PnPUtil.exe [f |-i] [-? |-| d |-e]
    Examples:
    PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
    PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
    PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
    PnPUtil.exe EI-> list all packages 3rd party
    PnPUtil.exe d oem0.inf-> delete package oem0.inf
    PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
    PnPUtil.exe -? -> This form to use

    So I ran this command:

    d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
    Microsoft PnP utility
    Processing inf: HPScanMiniDrv_DJ3050_J610. INF
    The driver installed on a device on the system.
    Successfully added driver package.
    Published name: oem115.inf
    Total attempted: 1
    Number was imported successfully: 1
    --- cut here: end ----------------------------------------------------

    The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

    During troubleshooting earlier, I already copied the file
    HPScanMiniDrv_DJ3050_J610.dll
    Located on the HP installation CD
    in the folder
    c:\Windows\System32\
    and also to
    C:\Windows\SysWOW64\

    I then run the steps here:
    http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
    Before using the wizard, connect your scanner or camera and turn it on.
    If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
    To start the scanner and Camera Installation Wizard
    Open the wizard scanners and cameras by clicking on the
    Start button, then click Control Panel.
    In the search box, type scanners and cameras and then click Scanners and cameras.
    Leave administrator needed if you are prompted for an administrator password or a confirmation,
    type the password or provide confirmation.
    I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
    This shows the scanners currently present on the system.
    If it is present, double-click it.
    Microsoft Windows will be found the driver for you.

    But he could not find a scanner or install the scanner driver.
    So not solved.

    14 - Note: If a successful installation: for example, you should be able to see the
    device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
    devices

    15 - I then tried to run Windows fax and scan program
    (you need to install first)
    WFS.exe
    But not find scanner.

    16 - I then connected the printer with a USB cable to the computer.
    He began the installation of the driver and reported a successful installation
    and analysis successfully.
    I guess that somewhere in the previous steps, that the pilots were in the right
    place.
    But it works with my attached USB cable.
    If I try to remove the USB cable it says
    "Cannot find the scanner." No scanner or other source TWAIN found on the system'

    17. I also tried to run the Installation Wizard of HP printer
    http://support.HP.com/in-en/document/c03521864
    but that no longer works.
    It has detected now:

    "HP Deskjet 3050 J 610 series" - network
    But for the network one he noted a problem:
    "The wizard has reported a problem with the software driver for the selected printer."

    "HP Deskjet 3050 J 610 series" - USB
    For this version of the USB what he reported:
    "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

    If you click 'next' again it downloads the usual HP software that you
    can not install. With the same mistakes as in step 2. and 3. here.
    So no solution.

    18 - of the current workarounds:

    a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
    Then connect a USB, Microsoft Windows should detect the printer / scanner
    and install the drivers.

    But printing should work wireless.

    Disadvantage:

    To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

    b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
    But it is not free software. But it works by scanning wireless also.

    Question: If you have the best solution or workaround solutions, for example to activate
    scan wireless too, please let me know.

    Hello @knudvaneeden,

    It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

    Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

    Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

    Try the scan of the painting to see if you have the same problem.

    Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

    Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

    You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

  • HP Deskjet 3050 J610a: How to install portable computer on a new HP scanning software to win 10?

    My HP Deskjet 3050 J610a connected automatically to my new laptop so I don't have any software of HP in my laptop but I need to install the scan function.

    Hello

    Please download and install the following full feature software and driver and install it on your new computer:

    http://ftp.HP.com/pub/softlib/software12/COL34584/al-109394-3/DJ3050_J610_1315-1.exe

    and the following software will help you print photos:

    http://www.HP.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html

    Kind regards.

  • HP Deskjet 3050 All-in-oneJ610: impossible to get my drive to load Windows 10 so I can install my scanner

    When I switched to 10 Windows 7 my devices were on but I did a restore and lost the scanner. The disc will not load to Windows 10, only Windows 7. How can I fix this. I always have my printer though.

    Hello

    Thank you for using the HP forum.

    You can download and install the software COMPLETE features of HP printing for your operating system:

    http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050-all-in-one-printer-series-J610/4066450/model/4066451#Z7_3054ICK0K8UDA0AQC11TA930C7

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    Hope that helps.

  • How to print without margins/marginless/full page on 8.5x11inch with HP Deskjet 3050 J610 letter paper?

    Hi, I tried to print a PNG image in painting, I did on my HP Deskjet 3050 J610 without lines or borders. This is a fully colored picture and I'm trying to get it to reach all ends of the page, so I can print without ANY white on the page at all. Thanks for the help!

    Hello

    The printer is not supported boderless at all.

    Kind regards.

  • Install HP deskjet 3050 a error: missing operating system

    My printer HP deskjet 3050 has during the installation, I get the error: operating system file missing c:\Windows\inf\usb.inf

    Please help
    Windows 7 64 bit

    Hi Nathan,

    1. What is the accurate and complete error message you get?
    2 does the problem only occur when you are installing Hp Printer?
    3. don't you make changes to the computer before the show?

    Method 1: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 2: I suggest to perform the clean boot and then try to install the drivers to check whether a third-party program is causing the problem.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
    http://support.Microsoft.com/kb/929135

    Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

    Method 3: I suggest you to uninstall and reinstall the latest drivers on the manufacturers website. http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodSeriesId=4311836

    Post us the results once you try the steps above.

  • Mac Lion will not configure Deskjet 3050 a to the wireless router. Have installed software HP 3 times.

    My Deskjet 3050 series J611j was ooriginally configured with Mac OS Snow Leopard. I have since installed Lion (10.7.3). I inadvertently reset the default printer and it stopped connecting with the wireless router.  I installed the new software HP Lion but when I go through the installation, after that I tell the printer to connect to the router, I get a message saying that the device is not connected to the computer and connect with a USB connection. But it is connected with a USB cable.

    I fixed it by pulling on an old PC and launch the CD. Who got up the printer on the wireless. from there, I could finish and connect with the Mac.  Thank you.

  • Why can not install HP DESKJET 3050 has in a series of J611 on my new computor windows 8

    What can I do to make my existing HP DESKJET 3050 has all in one printer to work on my new computer windows J611 series 8 when I put in the disk says it is not compatible in some way?

    Get the updated drivers from HP for Win8:
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5298986&sw_lang=>

    As with all HP printers, the software must be installed before connecting the printer. Installation will then ask you to connect via USB. If you have installed all previous versions, uninstall them first.

    I have this same AIO, and new long pilots work fine.

    SC Tom

  • Printer HP Deskjet 3050 has prayer after installing new cartridge HP

    After replacing the black cartridge the wrong printer aligns the chops from the top of the page and forget the lines print. I tried all the recommended soplutions. Even the alignment page has half of it missing, so is not recognized by the printer. Even if printing from my computer or just copy. Is there a way to reset top factory of the printer page and start again?

    Hi DavidAH,

    Welcome to the HP Forums!

    I understand that your HP Deskjet 3050 went wrong aligns the chops from the top of the page and missing print lines.

    I recommend the following guides:

    1.) "alignment Failed" Error Message displays on the all-in-one.

    2.) Troubleshooting print quality problems.

    3.) reset of the printer.

    Hope this information helps and have a nice day.

  • Install Apps on HP Deskjet 3050 all-in-one a - J611h.

    Purchased a HP deskjet 3050 all-in-one a - j611h; tried to add applications, but they do not appear to manage my Apps.  When I click on 'Add to the printer', he says "added to the printer", but when I then go to 'Manage my Apps', there is nothing there! What to do next?

    Hello pisces3703,

    First of all, let me tell you that I'm sorry that you are experiancing this problem today.  It seems that you printer does not support printing applications.  Here is a link to the place where I foud this information: http://support.hp.com/us-en/document/c03722645. I hope you find this information useful.

Maybe you are looking for