Install errors with Windows XP Sp3 every time I try to install the updates or software, I get an error message telling me that I have a current installation.

Similar Questions

• Every time I open a file in Media Player 11, I get a dialog box telling me that Windows Installer is "preparation for installation.

  Whenever I open a file in Microsoft Media Player 11, (11.0.5721.5280) I get a dialog box telling me that Windows Installer is "preparation for installation.

  He tell me what it is trying to install and crashes

  No media plays back.

  Cancellation does not - it retrys with encouraging them. The only way to get rid of the dialogue is Ctrl/Alt/Del and end task. It also closes WMP11

  SP3 Win XP32

  I just installed Office 10

  I ran the repair of Office 10

  I uninstalled WMP11 and reinstalled

  I ran "Fix IT" page Support MS

  I run MS Security Essentials... It is to this day and I run a full scan

  I think you meant:

  "a. initially, box run, type"msiexec /unreg", and then press ENTER."

  I did and it helped somewhat. Message anyway, but he went and the media played.

  If I did:

  "(b) then type" msiexec/regserver"and press ENTER."

  The problem comes back

  I went a step further and ran a restoration of the system to the day, I installed Office - it worked.

• Error message every time I try to download the update of security for Microsoft Office System 2007 (KB976321)

  Update of security for Microsoft Office System 2007 (KB976321)

  Download size: 1.4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A 2007 Microsoft Office System security vulnerability could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/976321

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• When installing the adobe reader software, I get database error: 2003

  When installing the adobe reader software, I get database error: 2003. Wat is to do

  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-reader-installation-Windows.html

• Hi, I have windows 7 with explore 11 and system: Windows 64-bit, English, MSIE. My problem is when I click on a new video I get e message telling him that I have to update my Adobe Flash Player, if I click it and it takes me to your site for updates ok.

  Hi, I have windows 7 with explore 11 and system: Windows 64-bit, English, MSIE. My problem is when I click on a new video I get e message telling him that I have to update my Adobe Flash Player, if I click it and it takes me to your site for updates ok. I go through the steps 1 and 2 ok, but when the small screen for the Adobe Flash Player Downloader arrives, he remanins empty and nothing happens. So what to do the next update please.

  Please do not post the same question more than once!

• When I try to run the update in widows I get the error number: 0x8024400A

  When I try to run the update in widows I get the error number: 0x8024400A. I also tried to restart the automatic update service and BITS service with no luck. Any ideas? I am running Windows XP SP2 on a Dell Latitude. I lost a hard drive and just reinstalled today of a disc from Dell.

  Thank you

  Adam

  http://support.Microsoft.com/kb/836941

  Read the above article, you can use Fixit, but I suggest fix you it yourself by following the steps in the resolution.

• I need to activate my membership creative cloud on my second computer but I get a message telling me that I have already installed on 2 computers, which I did not, and the only option it gives me is to uninstall all my computers, which I'm read again

  That I need to activate my membership creative cloud on my second computer but I get a message telling me that I have already installed on 2 computers, which I did not, and the only option it gives me is to uninstall all of my computers, I am reluctant to do because it works on my main computer (MacBook Pro) and I don't want to ruin that.  How to install on my desktop (iMac) counter without uninstalling on my another computer first?  My subscription tell me I can have it installed on 2 computers!

  that option is not to uninstall, it is disconnected.

  Click Yes and disconnect all others.  then you can connect on the one you want.

  and when you start a program adobe on your other program will give you the option to connect.

  end of the number.

• I can't install the update of security KB2724197, get error installation failed

  The yellow ball advising me that there is an update to install, appears where it's always on my windows XP PC.
  When I click on the ball, continue to the next step which says it's install, but then I get a message that the installation has failed.
  I tried to install the update of security KB2724197 at least 10 times without success.
  I rebooted, tried again and also checked for viruses and always without success.
  The yellow ball continues to appear.
  What is my next step, given that my PC is vulnerable to attack?
  Joseph

  Hi JosephR,

  In some other threads that I saw about problems with this particular update, the problem has been resolved with one of two things.

  First of all, I suggest you reset your Windows Components update.  Please take a look at the article below with the Fixit to do it for you:

  http://support.Microsoft.com/kb/971058

  If this does not help, the issue could also be caused by a rootkit on your system.  Please take a look at the similar thread below where the poster was able to resolve the problem through Taupo Tech by removing the rootkit:

  Cannot install Windows Update KB2724197, error FFFFFFFE

  I hope this helps!

• Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

  Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest you register the Msado15.dll file required.

  a. Click Start and then click Run.
  b. in the run dialog box, type the following commands in the Open box and then click OK.

  Regsvr32.exe ">"

  The> placeholder is the absolute path of the file Msado15.dll.

  The following examples show how you can specify an absolute path:

  Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
  
  If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

  DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
  c. click OK.

  Method 3
  I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 4
  I would say that you can download and install the update to the clean boot from Microsoft download center.

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

• I have CS5 and it won't let me install the updates now. I get the error "try back later" every time. I have a Dell PC with Windows 7.

  How can I install updates from Adobe to CS5?

  Thank you

  Kim

  Sometimes the old updates of program work do better manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• I tried to update my laptop (windows vista) and every time I try the error Code: 80072EE2 presents itself, how can I?

  I recently had to re - install my disk boot, because for some strange reason, it wouldn't work. But I fixed that, he places the first version of windows vista. I tried to connect to the internet, but I couldn't because the original software did not support wireless, so I had to update, but I couldn't go without an internet connection. I am connected to internet via ADSL and it worked... but still can not update because the error Code: code 80072EE2

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  
  

• I have a sony vaio with windows xp sp3 ver2000 pro and it cannot find the drivers for anything whether it is pluged in the usb port

  I tried the answer on this page since the windows site and it did not work https://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/usb-plug-and-play-devices-do-not-install-on-xp-pro/ea6c1409-ac48-4c68-8bf4-0800497531ed

  Hello

   

  Welcome to the Microsoft community!

  You cannot use USB devices.

  The problem may occur because of out-of-date firmware or basic input/output system.

  To help you better, we need more information.

  Do you get any error messages?

  To work with the issue I suggest you follow the steps in the site mentioned:

   

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• I have Windows Vista and a Dell. Today, Windows automatically downloaded an update. Since then every time I try to use the search on the Web site, it freezes and I have to leave the internet and in some cases restart?

  Internet Explorer

  Hi Lee8772,

  Welcome to Vista forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what version of Internet Explorer (IE) do you use?

  Method 1:

  You can try an optimization of the Internet. See the article mentioned below

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Method 2:

  I suggest you perform a system restore in safe mode. To log on in safe mode follow the steps mentioned below.

  Step 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. Select safe mode from the menu.

  Step 2:

  To perform a system restore follow the steps mentioned below.

  1. click Start, type system restore in the Search box , and then select System Restore in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click choose a different restore point , and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  For more information, see the following articles

  Turn back time on your PC http://Windows.Microsoft.com/en-us/Windows-Vista/turn-back-time-on-your-PC-undo-system-changes-with-system-restore System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Previous versions of files: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to print jpeg images simple and every time I try to print the file asking to save to the XPS format, and even then he used to feel. What continues?

  I'm going to print an image

  I select the picture and size and press on print
  The computer then tells me to save it to an Xps file, and it will not print it
  Is happening?

  Hello

  1. Have you tried to open the image in another application (other than stick them in a doc) as standard Windows Picture Gallery and printing from there?
  2. You have installed the Microsoft office program on your computer?

  I suggest to set the default printer and check the status of the issue.

  Change your default printer

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer