Install Firefox 31 point 8.1 of Windows just gives a blank screen and the error "not responding".

Similar Questions

• the home of Windows 7 Desktop with touch screen and the problem is "not authentic."

  I have a windows 7, but lately its been said that is not true and that I have a counterfeit. A person or an HP agent will be able to help me or guide me in this process of solving this problem?

  According to Microsoft, Windows activation is valid during the initial Setup.  If you change the device, it can falter, because it will do a periodic test.

  (1) if I have activated Windows, why is Windows on my computer not authentic?

  Genuine Windows is a recurring process that checks your product key to ensure that it is used with the material, he has been associated during activation. If the product key appears as not authentic or not valid, it is likely that the product key is used on another computer or is a counterfeit.

  (2) I need to activate Windows after making a hardware change?

  Perhaps. When you make a significant hardware change to your computer, such as upgrading the hard disk and memory at the same time, you may be required to activate Windows again. For more information, see Activate Windows 7 on this computer.

• Windows starts with a blank screen and a functional mouse cursor

  Recently my HP laptop turned off by itself, when I resarted, I got was a white screen with a functional mouse cursor.

  There is no logon screen or anything just a blank screen. When I'm in safe mode then it will display "safe mode", written in the four corners and the top center of the page other that the version of windows that's died.

  When the laptop starts, it displays the windows XP startup screen then turns off and that's it.

  I don't know where to go or what to do any help would be greatly appreciated.

  Hello

  Have you made changes on the computer before this problem?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer can only display the wallpaper, a black screen or a blue screen:

  http://support.Microsoft.com/kb/318027

  For more information, see the following Microsoft article.

  http://support.Microsoft.com/kb/314503

  Hope the information is useful.

• Windows 7 Professional with white screen and the mouse cursor

  I have a Dell Latitude E4310 running Vista professional 7.

  It worked fine with no problem except when I turned it on this morning.

  He went through his normal boot sequence (Logo Microsoft...) and then instead going to my office for display, the screen stayed black with only my visible mouse cursor.

  I can boot into safe mode and my desktop is visible.  I don't know what to do at this point and would be grateful to anyone who helps.  Thanks in advance!

  Hello

  Do a Safe Mode system restore to before the problem.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  __________________________________________________

  If that does not fix it:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• MS windows 7 paint 'mostly blank Ribbon; all the tools not available. "

  Ms paint worked many years now, after a few updates, open Paint with White Ribbon for most.  Have not used since March.  But now, no tool is available to draw lines, enter the text, etc.  How one refresh you can paint, normally open as shown in all the tutorials of paint.

  RHStreet

  Hello

  You have installed the updates recently?

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows7/see-which-Windows-updates-are-installed

  If you have installed updates recently, then I suggest you to perform a system restore and check if MS Paint works correctly.  Follow the instructions below:

  a. click Start, type System Restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  b. in the System Restore dialog box, click choose a different restore pointand then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  Check out the link: System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Let us know if it helps.

• Windows vista has been updated, and then just went to black screen and the kind of start to restart all.

  It just seems to be a loop.

  Hi Linda,.

  Thank you for your response.

  Here are some steps that you can try in order to solve the problem.

  I suggest you to change the startup command sequence and select the hard disk. Then, follow the steps provided by Abdul R and an update with the results.

  If you still get the same error message, disable the floppy in BIOS drive and check.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.

  Things I tried but has not made a difference:

  reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8

  With xp media center

  PS. This occurs also at any time the information down to install an active x on any site control

  The only way to surf now with frustration is to use IE 8 NOT add optional

  So I fixed that on my own and that's how I did it.

  You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.

  Uninstallin IE 8 by going to:

  Start--->

  Control Panel--->

  Add Remove programs--->

  Scroll down to IE 8--->

  Click on delete.

  IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.

  Resart your computer and install IE 8.

  This worked for me and may or may not work for you.

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• I installed CA secruity suite yesterday and evertime I try to open it, I get a pop up of microsft windows saying there was a problem and the program closes

  Yesterday I installed Security Suite CA.  It installs and everything indicates that it works correctly, but when I try to open a pop-up appears microsoft Windows telling me a pproblem occurred and the program stops, and then another pop up appears saying program closed and they send me a solution if there is

  Here are the codes I found impossible to repair... files should I copy the whole report or is it enough to make me help with this question?
  POQ 76 ends.
  2011-04-03 07:55:23, Info CSI 0000018e [SR] full Verify
  2011-04-03 07:55:23, CSI 0000018f [SR] components Info check 100 (0 x 00000064)
  2011-04-03 07:55:23, transaction Info CSI 00000190 [SR] beginning verify and repair
  2011-04-03 07:55:35, Info CSI 00000191 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows

  -sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24

  "{12}]" Settings.ini ":
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32

  b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
  2011-04-03 07:55:35, Info CSI 00000192 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "

  Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =

  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash

  incompatibility of
  2011-04-03 07:55:39, info CSI 00000193 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows

  -sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24

  "{12}]" Settings.ini ":
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32

  b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
  2011-04-03 07:55:39, info CSI 00000194 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "

  Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =

  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash

  incompatibility of
  2011-04-03 07:55:39, Info CSI 00000195 [SR] this element is referenced by [l:158

  "{79]" Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR.

  Hello

  ·         This software provided by the ISP (Internet Service Provider)?

   

  Method 1:

  I suggest you to refer to the link provided below to uninstall and reinstall CA security.

  Step 1:

  To uninstall a program in Windows Vista see the link below.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

   

  Step 2:

  Once you uninstall the program reinstall to install a program under Windows Vista refer to the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Method 2:

  You can also contact the CA Technologies team for available updates or patches to fix the problem.

  http://shop.ca.com/ca/support/freeis.asp

• Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  Original title: Need help ASAP please

  Hi all

  I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

  Hello Jay,
  Thanks for posting your question in the Microsoft Community forum.
  The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

  This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

  Don't worry; Let's try a few steps that will help you solve the problem.

  Method 1:
  I suggest you run the fix it and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• whenever I try to download a program that I tells me that windows can't open this file and I can not install nething or what did I do or what I need to know

  whenever I try to download a program that I tells me that windows can't open this file and I can not install nething or what did I do or what I need to know

  Hello
   
  1. What you're trying to download?
  2. What program you try to open when this occurs?
  3. What happens when you try to install the program?
  ReferThe link and follow the steps.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Whenever trying to install a new windows program gives me a prompt asking the administrator username and password?

  Whenever trying to install a new windows program gives me a prompt asking the administrator username and password, I don't know how to install a program when I don't have the admin username and password. I tried, tried to run the program as administrator, tried playing with the command prompt. Even to manage user accounts that I am invited with the same, if I am not even given these fundamental rights so what's the use of this product. Please help me in this regard.

  Hello Dominic,.

  Thank you for reaching out to us on Microsoft Community.

  The prompt that you receive requesting the administrator username and password during the installation of any program is due to the User Account Control (UAC). UAC can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.

  However, if you still want to delete the computer from Windows 8 user account control settings, you can view the suggestions about Disabling UAC in Windows 8.

   

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows  

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  It could be the browser problem because the site is up and running, could you please try another browser.

  If same thing happening there so kindly go to Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools and download the desktop here CC application.

  Note: Please follow the instructions very Important, otherwise the download does not start.

  -Pierre

• How can I close Firefox (closed) if properly run two windows with multiple tabs in each and I want to save them all?

  How can I close Firefox (closed) if properly run two windows with multiple tabs in each and I want to save them all? I tried to close each window by clicking the X in the top right, and then restart Firefox only loads the last closed window. Is it possible to close Firefox so it restarts with both windows?

  Hi osenochen, some additions to the first response:

  • You can display the classic menu temporarily bar by pressing Alt or F10 to access the file menu
  • There is also an icon of 'power' at the bottom of the graphic application menu (the one which is displayed by the button "3-bar" menu) If you prefer
  • If you closed a window and you want to re - open, go to the history menu and see a list of recently closed windows (by default, up to 3 windows closed are stored and can be re-opened - not applicable to windows private)