Install LR 6 stand alone update 64-bit windows 8.1 problem to start the program Adriano Gatt

Similar Questions

• Windows Update will download but not install. However, stand-alone updates will install fine.

  Download updates very well, but after that, they fail to install immediately. It seems to go so fast that he does not even try to install downloaded updates. I did everyting for repair/upgrade to update / save the components associated with the windows updates and microsoft Setup. I also deleted the cache update and downloaded fresh copies of the updates, but still no instlal. I even did a repair install on xp at a given time. The machine had a malware infection, but I healed part, including purging the master boot record and wiping the boot sector. I am really puzzled at that time and any direction would be greatly appreciated.

  Thank you

  Brian

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
  http://support.Microsoft.com/kb/906602

  Updates are not installed successfully from Windows Update, Microsoft Update, or by using automatic updates after you perform a new Windows XP installation or you repair a Windows XP installation
  http://support.Microsoft.com/kb/943144

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  0 80096001 x 80096005 x 0 0 x 80096010 0x800B0001 0x800B0003 0x800B0004 0x800B0109 0x8007f0da 0x8007f01e

  You cannot install updates that you download from the Windows Update Web site on a Windows XP-based computer
  http://support.Microsoft.com/kb/934648/

• My Master Collection Adobe Creative Suite 6 is registered and must be a stand-alone product. When I try to open one of the programs I get a pop up saying that I need to renew my subscription with creative cloud. I have the free version of creative cloud o

  This is the message that I sent to Adobe

  I thought that my problem has been resolved, however it has reappeared.

  It was my intention to send a screenshot of the pop-up that appears; However it doesn't seem to be a mechanism

  to do this during re - open the case.

  I will describe the image.

  A yellow triangle with an exclamation mark inside. On the right side of the triangle it is indicating a text

  "We cannot activate creative Cloud."

  Under the triangle text further States

  "Product activation is required to use this product.

  "You must have an internet connection to activate this product. Please check your connection settings and choose Retry.

  When I click Try Again I'm directed to a subscription on the open hyperlink Manager called link then I get a message indicating

  "Sorry this page is not available" in addition there is a notice "error returned error 404" is displayed. ""

  I am connected to internet 24 * 7, but the fact is that my Adobe Creative Suite 6 Master Collection is a Stand «»

  Only one"set programs and I should be able to use them when I am offline. There is no reason why I should be connected to Creativ

  e cloud

  How we stop to resume my perpetual license CS6 creative cloud?

  https://forums.Adobe.com/thread/1584746

• Stand alone update of Lightroom 6.6.1

  I need Lightroom Standalone 6.6.1 update for my new camera Fujifilm X - T2, but I have been loaded on the forum because there is no one at Adobe, who can tell me where to download from.

  Thank you!  I found the link in the forum just before your answer to my question and I downloaded the update.  I was so concerned if it would work, because of all the problems that I saw in the forum with 6.6.1.  However, the problems were mainly associated with WIN10 and or users using Mac with older software, so I took a leap of faith and installed 6.6.1.  Fortunately, the update has been successful for me, well until I get my X - T2 Monday and process raw files, I don't know if there are problems.

  It seems that the support of the people in India (I talked to three) cannot answer questions on stand-alone updates, then phone calls are a waste of time.  I'll use the forum next time I need assistance.

• Is there a stand-alone Lightroom? I have no internet at home so the cloud is not an option. I want to spend 9 elements.

  Is there a stand-alone Lightroom? I have no internet at home so the cloud is not an option. I want to spend 9 elements.

  Do not forget that the version of 'cloud' of Lightroom does not store anything on the internet. All your images are locally on your hard drive; all the software is installed on your hard drive. The version of 'cloud' just lets you share your images via Adobe's web services with the public or your mobile devices, if you choose to share them.

• Hi, I have a problem in the installation, how to install acrobat 8.1 pro in 64-bit Windows 7 Enterprise is existing in Windows XP.  I just want to transfer the license Adobe pro 8 Windows 7 64 bit. What is the procedure?

  Hi, I have a problem in the installation, how to install acrobat 8.1 pro in 64-bit Windows 7 Enterprise is existing in Windows XP.  I just want to transfer the license Adobe pro 8 Windows 7 64 bit. What is the procedure?

  You need to install 8 AA on the new OS with your current S/N (the license allows 2 installs). After the installation, do all the updates if you expect any chance of 8 AA to run on the system. If the updates will be installed not in the menu help, then go to ftp://ftp.adobe.com/pub/adobe/acrobat/win/ and install updates in the order. People seem to have been successful with 32 - bit systems and some have reported success with a 64 bit system. After installation, print something to the Adobe PDF printer to make sure it works. If this works, you should be in good shape as printing treat the bottleneck. There is a solution, but you shouldn't have it.

  If all works well, then go back to the old machine and disable this installing and uninstalling. Don't forget that your configuration is not supported by Adobe. It seems with every new version of Windows, MS seeks to make the user to upgrade the other hardware and software for compatibility. There may be legitimate reasons for this action, but the game just seems to be Ms.

• while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. .

  while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?

  Hello

  ·          You have an earlier version (trial version) of Corel painter, installed on the computer?

  Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.

  See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333

  Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus

• Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

  (Info for PC vs Mac: https://forums.adobe.com/thread/1658959?sr=inbox&ru=3738552)

• I'm unable to install photoshop elements13 as a result of a mistake. It shows no error code but said - this installer does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.

  I'm unable to install photoshop elements13 as a result of a mistake. It shows no error code but said - this installer does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.

  Download the 64-bit Installer,

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I've updated to Lightroom and now I can't start, the license agreement will not disappear after the acceptance of this

  I've updated to Lightroom and now I can't start, the license agreement does not disappear after she accepts any ideas?

  Hi Patricia,

  Please let us know very little about, so that we can fix it as soon as possible.

  What operating system are you using.

  You use Lightroom(5/6) as a Standalone Version or its CC.

  In addition, please try and update Adobe Application Manager on your system. See link: can not accept the product launch and end-user license agreement

  Once his finishing update, relaunch the Lightroom and see how it works.

  Let us know if it helps.

  Kind regards

  ~ Mohit

• This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.

  This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.  How to work around this issue and get this downloaded.

  Lisa, please try of products download Premiere Elements | 10, 11, 12, 13 and let us know if you need help with this.

  Atul_Saini

• 11.0.4 is the last update for stand alone AE CS6 for Windows?

  I bought AE CS6 for Windows. The version is 11.0.4 and it offers me updates. This is the last update on the stand-alone (not CC) version?

  Thank you.

  Paul

  The 11.0.4 update is probably the last for After Effects CS6. It is conceivable that we could meet a problem that requires another update After Effects CS6, but I am not aware of these issues right now.

• 64-bit Windows vista hangs after you run the update

  Hello

  Last night I ran the update of windows on my 64 bit vista laptop, he said there are 2 updates important (I don't remember what they were) and 1 optional (for security essentials).  I chose to install them all, let run updates, restarted the computer when he was asked and then pinned the problem.  Windows starts up nicely, all my startup apps pop up like normal (things like security basics, steam, etc.) and, if I don't touch it, it looks fine.  Sometimes I can get as opening firefox, sometimes just moving my mouse t - it, but the computer just hangs.  I can still move my mouse (sometimes it turns in a circle, as the computer working on something) but I can't click on anything whatsoever, cannot Ctrl + alt + delete... my only way of l ' down made a difficult start.

  I tried to use the tool of the previous version to roll back to before the update, the Wizard works well and said completing, but I still have the same question.  If I'm in safe mode or safe mode with networking, it works fine. I even tried to delete pending.xml to see if it was an update stuck but who did not (cmd said that there was no pending.xml found to remove)

  Anyone know what this might be or how to fix it?  I'm fresh out of ideas

  Hello
   
  Given that everything works well in safe mode which makes them a third-party application causes the computer to freeze.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  For more information, refer to the article below.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install HP PhotoSmart 3210 on 8.1, 64-bit Windows. You want to start.

  Goal: Printer install HP Photosmart 3210, FUll CV utility (Solution Center, Photo Creations, etc.) on a new DELL system running Windows 8.1, 64-bit.

  Hardware configuration: The HP 3210 is connected by Ethernet to Western Digital My Net N750 router.  Two computers are connected to the same router: a race of all-in-one DELL 8.1 of Windows with all updates installed (this is the system I am trying to install the HP software on) and an Apple iMac, I need only basic printing capability.  Both computers are temporarily connected via WiFi; This will be changed to Ethernet at a later date.  The router using DHCP to assign IP addresses to devices, including printer.  I can ping the printer from two computers.  I can set up the HP embedded web server on both computers.  The iMac can print and scan from the printer.

  Short story: I tried several times to install the printer drivers and the HP utility software on Windows 8.1 System.  At one point, I installed the drivers, but not able to install the utilities.  When I finally got the utilities installed, they did not see the printer.  At the present time, even the notebook can not see the printer.  The mistakes that I've seen are:
  -"The system cannot find the file specified."  (the name of the file contained the string ice_suffix.  "I believe that this failure was due to the presence of McAfee Security software, using msconfig more later disabled.)
  -BSOD BAD_POOL_ERROR
  -No network detected (from HP Install Wizard) device
  "This app prevents you to restart" (the title of the app was "HP all-in-one series")
  I tried the wizard install the HP add a tool of the device, the print and Scan doctor and several other things.  I did a level 4 uninstall as described below, which has encountered an error in an early phase, but continued after I clicked "OK".  I installed the latest version of Flash.  The System File Checker has been run when the system was first installed on May 29 and found no problem.  I temporarily wired the printer directly on the Windows system via USB (and then put it back on the router).  I have reset the printer by removing the power for a minute, etc, etc.

  At this point, I would like to clean the system as much as possible and try again from scratch, using the installation wizard.  Based on my experience so far and a careful reading of the many positions installation - problems on this forum, I created a checklist of proposed to achieve this.

  My request on the forum: Please see the checklist.  I won't go forward until it has been approved as being complete and accurate.  Missing something?  Nothing is unnecessary?  The order should be changed?

  NOTE: Step 6 assume that you have already tried to install the software and therefore to have a copy of the uninstaller on the system utilities.  In my case it is true.

  1 connect the printer to the router via Ethernet.  (This is my current setup).
  2 turn on the printer.  Unplug the power cable from the back of the printer.  Wait at least one minute.  Reconnect the power cable.  Wait for the printer to initialize.
  3. do a "clean boot": (now RMB) do a right-click on the icon of window in the lower left of the screen.  Select 'run '.  Enter "msconfig".  Click on 'OK '.  In the Services tab, check "hide all Microsoft Services".  Click on "disable all".  In the Startup tab, click on "Open Task Manager".  On the start of the Task Manager tab, click the top entry and then click "disable".  Repeat for each entry in the list.  Verify that the status column now contains "Disabled" for each entry.  Click on the 'X' at the top right of the window to close the Task Manager.  In the System Configuration window, click 'OK '.
  4. RESTART the system to perform a start without the Services and start disabled.
  5. connect to an administrator ID.  This must be the ID used previously to try to install the software.
  6 do an uninstall of level 4: RMB on the icon of the window in the lower left corner of the screen.  Select 'run '.  Enter '%Temp% '.  Click on 'OK '.  In the resulting display folder (supposed to be in C:/Users / 'ID' / AppData/Local/Temp, where 'ID' is your user ID) enter "Uninstall_L4" in the search box at top right of the screen.  This should find 'Uninstall_L4.bat' (supposed to be in C:/Users / 'ID' / AppData/Local/Temp/7zS0 * / util/ccc).  Click (or double-click if your system is configured to require that).  [NOTE: several forum posts say to use L4uninstall.exe, but this file is not anywhere in the Temp folder on my system.]
  7 meet the need of all the prompts that appear.  A final prompt will tell you that a restart is required.  If two windows appear at the same time, both with "Restart" buttons on them, click the button in the larger window.  [Note from experience: when I click on restart in the small window, WIndows complained that he could not start because the larger window was always active.]
  8. once the system restarted, RMB-the icon of the window > run--> msiexec /unreg-> OK, then run RMB window icon->-> msiexec/regserver-> OK.
  9. check that the uninstall and complete if necessary:
  Look in C:/Program Files (x 86) for HP records; If found, delete them.
  Look in C:/Program Data HP records; If found, delete them.
  RMB-> the icon of the window run-> % Temp %-> OK.  Delete all files in the folder that results.  [NOTE that it prevents to run uninstall again until installation has been completed, since it is where are the uninstall files.]
  RMB-> Panel window icon-> devices and printers.  If the HP 3200 Series is broadcast, RMB-> remove the instrument.
  RMB icon window-> Control Panel-> system-> device-> tab Manager display-> show hidden devices.  Expand "Printing queues" (click the triangle).  When a HP 3200 queue exists, RMB on it and click on uninstall.  Expand "Printers" and do the same thing.
  RMB-> run-> regedit window icon-> OK. Scroll to the top of the list.  Click on 'Computer' to establish a starting point.  Edit-> Find... check the box "Keys", uncheck the 'Values', 'Data' and "Match whole string only" boxes.  In the "Search" box enter "HP." (including interval)-> then find.  [NOPE, that is not all HP keys and found a few that seem not to be HP (for example SOAHP. (DLL). a search for "HP" finds lots of unrelated keys.  Is a good way to clean the registry if level 4 uninstall it did not?]  Use F3 to search for subsequent entries.  For those who are clearly HP related [How can I be sure?], RMB on the key, and select 'delete '.  [Yes, it's dangerous and without greater clarity I won't actually, but I don't like leaving orphans key autour.]
  10. run Disk Cleanup.  Click the window to access a screen start or Apps.  Type "Disk Cleanup".  Click on "free disk space by deleting unnecessary files.  Check the desired boxes.  Click OK.  Wait for the course to complete.
  11 RESTART the system.
  12 install the HP software.  Pointing a browser on http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe to download the wizard, then run the downloaded file.  On the first prompt screen, click "install".  When you are prompted, select custom installation.  "Uncheck the box 'Unique consumables HP', 'scheme Customer Participation', and ' bing for HP bar '.  When you are prompted for the update preference, select "Ask before updating" [my wife, nonnegotiable preference] remove useful tips and suggestions.  Click on 'Next' as required.  When you are prompted, select the Ethernet connection.  The printer must be discovered.  [On one attempt, at this point, that I received the message "the requested service is not found".  Of course, there is that HP Services listed in msconfig, but in order to get that much, I had turned off them ("clean boot").  This seems to be a catch-22 situation, unless these services should have automatically started earlier in the installation process.]
  13 RESTART.  This is necessary at the end of the installation process.  ["Clean boot" conditions hold back at this point?  If so, I'll have to restore the Services and Startup items later and antother restart.  [When is is safe to do so, that is how do you know that the installation of HP is really over?]

  Again, the purpose of this post is to validate the above list.  Your informed comments will be appreciated.

  Hello

  Please try to uninstall the software by following the Uninstall_L4 utility (as stated in your previous post)

  Then, follow the steps below and reinstall the HP software again:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Forms 12 c - Application-stand alone launcher - jar files / window cmd

  I installed forms 12 c and everything works fine.

  I decided to use the stand-alone launcher feature by downloading the frmsal.jar and configure a shortcut. For example: -.

  java-jar frmsal.jar - url " " http://myFormsServer:8888/forms/frmservlet? config = fsal "t - 30000 .

  I have saved this in a .bat file.

  I have 2 questions: -.

  (1) I noticed that the performance of the frmall.jar is downloaded to the local client. However, all other jar files customized are not downloaded from the server. I have to manually copy these to the customer or is it still requirements to do it automatically?

  (2) when the autonomous Launcher is running, I now have a cmd window and the form. Y at - it an option to hide the cmd and the form window is displayed on the client?

  Thanks in advance

  Richard

  
  

  (2) try this

  Start javaw-jar frmsal.jar - url "http://myFormsServer:8888/forms/frmservlet?" config = fsal"t - 30000

  (1) I have a few custom pots and everything works fine. You put them in $ORACLE_HOME/forms/java?

  Concerning