install Microsoft wireless laser mouse 6000

Hi, I bought used ms laser 6000 wireless mouse, this one: and now I can't find it on the bluetooth on my laptop, I have Bluetooth v2. The mouse requires installing with usb receiver or is it regular bluetooth mouse like those of ebay, you can buy?
I don't have a usb mouse with receiver and I thought it's ok because it should work on the bluetooth connection, but I can not connect, bluetooth it will not identify not even with the 'Connect' button on the mouse. the mouse works because the laser light is on.


It is not a Bluetooth mouse.  This is a RF mouse and requires the receiver supplied with the mouse.

Tags: Windows

Similar Questions

  • Microsoft Wireless Laser Mouse/Keyboard Version 2.0/3.0


    I was wondering if I can use my v2.0 USB Microsoft 2.4 GHz TRANSCEIVER that works for my keyboard Microsoft Wireless Laser V3.0 and my Microsoft Wireless Laser mouse V2.0 work for my other keyboard and mouse because I lost the transmitter/wireless receiver I had to for use. Anyway, the keyboard is called: Microsoft Wireless Laser Keyboard 6000 v2.0 and mouse is called: Microsoft Wireless Laser Mouse 6000 (there is no version on that). Also, if I can't use the USB with my keyboard and mouse, I was wondering if someone could fix my mouse? My mouse will not move. I move the mouse and my clicker or this thing won't pass. And then sometimes I can just click on it! Please help on these two problems. Thank you very much!!! (:


    For Microsoft hardware related issues, you can have a look at this link:

  • MS Wireless Laser Mouse 6000 v2.0 cleaning

    Is it safe to open the mouse laser to clean the wheels. It sticks so badly, I can hardly use it.  (Less than one year)


    Not really sure that Microsoft would say a situation where there need cleaning. Personally
    I would like to clean however remember I am not an employee or a representative of Microsoft.

    Wireless Laser Mouse 6000-3 years warranty

    Microsoft Hardware warranties

    The mouse comes with a support tech 90 day of the 1st incident that was about to begin when
    contact Microsoft at the number below.

    Hardware support of MS and warranty claims
    Tech Support 1-800-936-5700 for MS Hardware.


    Take apart can void your warranty.

    Microsoft Wireless Laser Mouse 6000 cleaning

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Error message: this operation requires an interactive window station while trying to install drivers for Microsoft Life Chat LX-3000 and Microsoft Wireless Mobile Mouse 6000

    Okay, so I bought recently when a helmet (Microsoft LifeChat LX-3000) and a mouse (Microsoft Wireless Mobile Mouse 6000) wireless, but my laptop Windows Vista Home Premium is having problems with the installation and execution of the drivers for these two devices.

    Original title: driver for headset and a wireless mouse will not install correctly

    I already had the Wireless Mobile Mouse 3000 and had no problems whatsoever doing this job, but I got it for at least a year I guess. I also installed the software that came with the CD (called Microsoft Mouse, even though it says on the CD Intellipoint 7.1) for the mouse and driver online for headphones (called helmet Microsoft) have also downloaded. However, when I plug in the devices, he's trying to find the drivers. Initially, it comes up with a window saying "New hardware found" and has the ability to "locate and install driver software", despite the fact that I already supposed to be installed the drivers through download programs or to use the CD.

    In any case, I select the "locate and install driver software" and it says "search Windows Update... «for 30 seconds or so, then said «Installing the driver software...» ».

    I then get a message saying "Windows has encountered a problem... etc... This operation requires an interactive window station. If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

    If I disconnect and reconnect the device, I get the same situation with "new hardware found" and the options for search again...

    I tried both devices on another computer (Windows XP) and they manage to set up automatically even without the software provided on the CD or on the website and work perfectly well, however I need them working on my laptop ;)

    So I guess the main problem is that I get this message "interactive window station" preventing the drivers to install correctly. I have no idea what this means and have spent a lot of time trying to find them online.

    Well, I've resorted to re - install Windows Vista and installed very well both automatically when it is plugged.

    Now to reinstall all my programs... fun fun fun...

    Thanks for your help anyway!

  • Wireless Laser Mouse 6000 v2.0 does not connect to the Wireless Desktop 3 receiver. 0a


    I'm having a problem, try to use a Wireless Laser Mouse 6000 v2.0 with a wireless desktop receiver 3. 0a. My previous mouse, wireless laser Mouse 5000 connects fine but the left click button is inadmissible about half the time so I bought the Wireless Laser Mouse 6000 v2.0 to replace. Laser mouse 6000 v2.0 works fine on my laptop with the usb receiver that comes with it, but I would like to use this mouse if you use my office receiving office 3. 0a that connects my microsoft comfort keyboard 1027 and all other previous microsoft mouse that I have owned. I downloaded and installed the latest drivers point software and smart and still it does not detect or connect the mouse 6000 v2.0.

    I tried to use the usb receiver supplied with this mouse on my desk but he won't my keyboard (comfort 1027), but the mouse works fine when using the usb receiver. Any suggestions to get this mouse works with my receiver older are greatly appreciated! Thank you

    Hi Mburton8899,

    It must have the same version of the receiver in order to work properly. Unless the mouse is bluetooth, it can only pair with the USB dongle, with which he came.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Wireless laser mouse 6000 v2.0 freezes / causes other problems.

    I had the wireless laser mouse 6000 v2.0 and the keyboard since April, but the problem just started occurring. I'll start my computer (I have Windows XP) and everything will be fine. As a first step, I can click on the start menu, but if I open a window, it seems that whenever I go to click on the window it will click out of it so I can't select it. From there on, I can't click on anything, no icons or anything. I have to press ctrl alt del to be able to click on the window or another program. I also discovered while I was in Internet Explorer I would surf the web, and he would start pages like I'm pressing the back button to return.

    I already tried things:
    -Uninstall Intellitype, uninstalling the drivers.
    -Change the USB ports.
    -Elimination of some programs / firefox & internet explore [I thought that maybe a bug as possible.]
    -Completely nuking my computer and put a new new version of Windows XP.
    None of them worked.

    The only thing that worked was to move the mouse and the keyboard with my old mouse and keyboard that are not wireless. This is driving me crazy. I just received it and had no problems until recently perhaps an update of some sort, but now he does it on a fresh new copy of XP. What other options do I have?

    I had problems by two different laser mouse 6000 V2, on one, the right click does not work except sporatically, now my other mouse is having problems with the left click function.  I am about to replace the micro-switch SPST (I think that's true) to see if that fixes it.


    I contacted microsoft on this subject (on the defective mouse) about 1 year... less than 2 weeks I received a COMPLETELY NEW mouse AND keyboard NEW in box to NO FEES, no RMA, NO return and was NEVER billed for replacement.  I ended up giving the other combo to my brother and he still works fine (other than the hard drive to use right click on the service), the same thing is happening to this mouse, it is difficult to make a left click, sometimes it works, sometimes, it is not click at all, sometimes it double click on...

    Give it a try, send an email to microsoft.

    I think they have problems with their defined wireless desktop V2 and replace without charge, without admitting a problem.

    Hope this helps somehow.

    PSS, if you have NO function of the mouse AND keyboard, or just the mouse work not at all (NO movement etc.) I had a neighbor install a just CB radio next... frequency RF interfered with the signal RF mouse and the mouse (and sometimes the keyboard) refused to work as long as he handed (IE holding the key to the transmission on the CB).  Sorry if this seems rudimentary, but some people have trouble understanding certain issues so I try to make them as simple as possible.

    The rule that follows:

    Interference RF (CB, other wireless devices on the same frequency (of HAM Radio etc.),

    Exclude the above listed issues.

    Otherwise, it would appear that you have either A: a bad receiver (The Oval device plugged into the PC), or B: a bad mouse RF transmit/receiver.  Anyway that I will try to return the product I used the Wireless Desktop 6000 V2 over 3 years with NO problems other than to wear down me the switches in mice.  (I use my PC very strongly).  Try emailing Microsoft for a replacement, it can't hurt and maybe you'll get a new like I did!

  • Compatibility of the 'wireless laser mouse 7000' with 'wireless laser mouse 6000 receiver.


    One of my colleagues gave me his extra Wireless Laser Mouse 7000, but he gave me a Wireless Laser Mouse 6000 receiver. will be the mouse 7000 and 6000 receiver work? are they compatible?

    help someone?


    Yes those should work - just install the software (Intellipoint) and configure the mouse than the 7000.

    IntelliPoint - free

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000

    I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.

    It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.

    Any suggestions appreciated

    Before starting any discussion can you please tell us which laptop model you have?

    BTW: What is your BT mouse has own dongle BT?

    See also

    Good bye

  • MS Wireless Laser Mouse 6000. When I test of arrow to scroll/bounce backwards and forwards

    I have a MS Wireless Laser Mouse 6000. For a while it was fantastic, but now, everytime I try the / arrow scrolling through columns of docs, images or e-mail items moved with the cursor (on the side or on the bottom) begins to bounce back and forward and points of view moving vertically (or left and right uncontrollable.) To increase the frustration, sometimes things work normally for a short period before the fun begins. When I change to a basic mouse (USB) there are no more problems! : O Tony

    Most often when a device does not work, it's because the driver has been corrupted.

    Try reinstalling your. ' t-work correctly? SignedIn = 1

  • Microsoft wireless mobile mouse 6000 v2 2.4 ghz dongle replacement

    Is the dongle that came with the "microsoft wireless mobile mouse 6000 v2" replaceable?  If so, where would you get? URL?

    Hi Amishangel,

    You can get in contact with the center of replacement of Microsoft and are looking for the same thing.

    For more information, you can consult the following article:

    How to replace Microsoft software or hardware, order service packs and replace product manuals

  • Microsoft Wireless Laser Mouse 5000' now works' back (vertical) - how can I fix it?

    I had the same Microsoft Wireless Laser Mouse 5000 for a few years (using Vista) and all of a sudden today, it is backwards (vertical) - can I use it, but it's clumsy - suggestions - I tried to restart, disconnection, battery change, etc..

    I turned the mouse around - but the horizontal then runs in the background! Any ideas out there?  Thank you...


    You have problems with programs
    Error messages
    Recent changes to your computer
    What you have already tried to solve the problem

    Hi teach007,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    See the Microsoft articles below and try the steps mentioned them, check if it works.

    Troubleshoot a wireless mouse that does not correctly

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Mouse Microsoft Wireless Laser Desktop 6000: do not use the new Intellipoint

    I have the Wireless Laser Desktop 6000 B7T-00020-B. The keyboard works fine with the latest driver, but the Intellipoint software recommended for this mouse [model: 1052] by Widows Update causes instructions magnifying glass and the mouse to start randomly wih no way to stop it. You have to start in safe mode to remove the driver, BUT it leaves a condition behind this function of normal mouse affect. Menus not roll down and stay, they go too fast click. The button in the Explorer does not work. My challenge was to re - install Intellipoint, download Revo Uninstaller and start in safe mode and used to rub the driver anywhere.

    Hello Elvinbrent,

    I suggest you to check with the Microsoft Hardware support for more information.

  • Microsoft wireless laser mouse 8000__

    I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

    I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker


    battery empty? or not connected? DoD you have intellipoint 7?

    have a nice day [url] [color = blue] download and install updates from Microsoft Update security! [/ Color] [url] [url] [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] [color = green] how to use Windows Live [/ color] [url] [url] [color = blue] Windows Help & how-to [/ color] [url] [url] [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] [color = green] Internet Explorer 8 : Homepage [/ color] [url] [url] [color = blue] Internet Explorer Help home [/ color] [url]

  • Cannot move or leave the pointer to stop in a place using Microsoft Wireless Mobile Mouse 6000

    Original title:

    I can't find a way to get the mouse move or allow the pointer to stop in place so I can use the keyboard correctly.


    1. what version of Windows is installed on the computer?

    2. what program are you using when the mouse starts to jump around?

    3 are you aware of any changes made to the computer, before the show?

    Assuming that you have installed on the Windows 7 computer, follow these steps.

    Method 1:

    Step 1: Safe Mode

    Start your computer in safe mode and check the number.

    Start your computer in safe mode

    Step 2: Clean boot

    If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

    Method 2:

    Check out the following link.

    Troubleshoot a wireless mouse that does not correctly

    See also,

    Change the settings of the mouse

    I hope this helps.

  • Wireless laser mouse 6000... transmitter/receiver

    I recently bought a mouse wireless 6000 (last week) and I lost the transmitter/receiver... where and how can I buy a replacement radio... Please help. Vince

    Hi VinceMcNeilly,

    You can see the following link.

    How to replace hardware or lost, broken, or missing Microsoft software

    See also:

    Computer mouse, keyboard, Webcam & more | Microsoft Hardware

Maybe you are looking for