Install new security

I am trying to install a new version of norton on my computer and it won't guard coming with the error, check for solution online and then we left the program and will no more go far what do I do?

http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

Uninstall the old version of Norton 1, using the Norton removal at the above link > trying to install the new version.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://www.Symantec.com/en/AU/Norton/support/index.jsp

For any other problems with Norton, contact the Symantec Support on the link above for the support of the Norton Product.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • can I install the old microsoft security updates (2009) on top of new security updates (2011)

    can I install old microsoft security updates (2009) on top of new security updates (2011) (ex: KB1234 is a fix for ieexplorer 2011)
    "(and then on top of that I'll install KB4321 a fix for iexplorer too)." Is this possible? Or is the patch also corrects the same problem that occurs in the past?

    Run Windows Update... it will select what your computer needs.

  • Error code 0 x 80073601: cannot run or uninstall Microsoft security essentials or install new version

    cannot run or uninstall Microsoft security essentials or install new version

    Original title: what is error code ox80073601

    Hi DavidValentine,

    Check that you have removed all other anti-malware real-time products that were already installed on your PC, including free products / trial that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malware bytes (paid), etc.).

    Note: If you use more than one antivirus or antispyware program at the same time, your PC may know a decrease in performance, become unstable, or restart unexpectedly. Before you install Microsoft Security Essentials, or if you want to solve problems with Microsoft Security Essentials, including the update of issues, you must first completely remove your PC Internet security programs.

    You may have to uninstall/reinstall MSE. You should be able to remove MSE of the Control Panel. Uninstall problems see:http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    Recommend that you restart the computer to ensure that the uninstall is complete. You can download a new Installation of MSE file fromhttp://windows.microsoft.com/en-US/windows/security-essentials-download

    Response with more information to help you.

  • "Extraction failure: cannot open output file" error message when installing new drivers

    Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

    Extraction failed

    Cannot open output file

    And the process ends.  He arrived at about 85% extraction every time.

    No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

    Hi GIJeff12,

    Temporarily disable any AntiVirus/Antispyware software.

    Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

    Disconnect your printer from the PC.  Restart your PC.

    Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

    If it was a success, re - enable your security software.

    Best wishes

    DP - K

  • Installed Microsoft Security Essentials and now Internet does not connect.

    I am currently using adapter compact usb wireless g Linksys for Wi - Fi. I installed Microsoft Security Essentials and it will be said I have an 'Excellent' Internet connection, there is no access to the Internet. Is there any fix for this? I am running Windows XP Home Edition...

    Q: which antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?
    A: McAfee and subscription was not common.

    Q: give application Norton or McAfee application ever been installed on the computer?
    A: Norton was installed originally [but] subscription missed [until I installed the McAfee application]

    See...

    I can't install Microsoft Security Essentials to clean my already infected computer?
         http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

    Cleaning a compromised system
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636

    If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

    Wish I had better news for you.  Good luck!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Whenever I try to find new updates for my computer error 80248009 appears under Windows Updates. I have not installed new updates on my computer in a month because of this problem. How should I do so that I can update my computer?

    Whenever I try to find new updates for my computer error 80248009 appears under Windows Updates. I have not installed new updates on my computer in a month because of this problem. How should I do so that I can update my computer?

    Error when you try to use Microsoft Update or Windows Update Web sites to install updates: "0 x 80248009":
    http://support.Microsoft.com/kb/956700

    Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Cannot install new hardware.

    It is a very weird problem...

    All computers are Windows XP with SP3.

    I can't install new hardware on computers.  When I plug in a USB keyboard or USB drive, the computer detects it and adding new hardware pop-up... and every time Assistant and he told me he can't install the new hardware.

    I tried with several (work) keyboards, mouse, external hard drives, flash drives all with the same result.

    The keyboard and mouse that are currently connected to the computer very well - work however, if I unplug and plug it into another USB port, they stop working too (probably because they are recognized as new hardware for Windows at this time), until I plug them into their original USB ports.

    In the BIOS, all new and existing keyboards work fine.  I also started a live CD of Ubuntu and all existing works and new material perfectly well there too.

    I uninstalled the USB devices from Device Manager too, but there is no change.

    I connected a PS/2 keyboard, which works fine in the BIOS, but then when I get into Windows, it stops working like the rest nine.

    I tried to start safe mode, but no change is.

    And Yes, I am an administrator on the computers.

    On one of the computers I tried to do a repair of Windows by using the Windows XP CD.  I am able to boot from the CD and select start Windows repair.  However, when I get to the part of the facility where you can only select your language, NO keyboard or mouse work, and I'm totally stuck at this time.  Then I had to do a clean install of Windows on this computer, and everything's fine.  But I can't really do it to my other computer.

    I don't know what else to try.  Any suggestions are appreciated!

    Hi BatmanBob,

    • You have security software installed on the computer?
    • Do you have a group policy on the computer?

    Step 1

    You can also try to temporarily disable the security software of the computer and try to install new hardware and check if it installs. If you are able to install, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

     

    Step 2

    You can also put the computer in a clean boot state and check if any third-party application blocking installation of the equipment and try to install the drivers in a clean boot state. Access the link below and follow the steps to solve a problem by performing a clean boot in Windows XP.

    http://support.Microsoft.com/kb/310353

    You can also communicate with the system / network administrator to check if there is some group policies for installing the drivers and change it.

    If you are still having the same problem after following the steps above I suggest you to send your issuein the TechNet community, given that the computer is on a domain network. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

    I hope this helps. Let us know the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Layout of biased e-mail. Failed to open an email. Windows Vista Home Basic. Installed Microsoft Security Essentials.

    When you open the e-mail, the arrow cursor has the blue circle that runs continuously.  There are some letters lapping on the e-mail page.   No old or new emails cannot be opened.   Two weeks ago, I installed Microsoft Security Essentials and this problem has been resolved until today; the same problem to access old e-mail is back.

    Try to compact and repair the database (www.oehelp.com/WMUtil/).   Then in security essentials exclude the eml files of research (see www.oehelp.com/OETips.aspx#3), because this results in a mismatch between the WinMail database and what is actually in the message store, generating problems such as you see.

    See if that fixes the problem.  You can also try to remove your e-mail account and then closing and reopening of Winmail opener and then add it again.  See www.oehelp.com/backup.aspx#wm for information about the message from WinMail store organization.

    Steve

  • Whenever I use the computer, I get the message "install new updates"

    The most recent 2 Win7 security upgrades/downgrades are on my computer. I checked.

    Whenever I use the computer, I get the message "install new updates"

    How to set the flag that says I have miserable things?

    Thank you

    Trevor

    Original title: upgrades

    Hello Tworg,

    Thank you for the update on the question and sorry for a delayed response.

    If your Windows Update history shows that .NET Framework 4.5.1 is installed successfully. If troubleshooting says ' registration for the service is missing or corrupt... not fixed "then you can try the methods provided below and see if help."

    Method 1

    I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

    Method 2

    If after performing more high question method persists try to follow the steps described in the following Microsoft article methods.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

    Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

    Important:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • I have to get a new security code every time?

    I'm mystified by the new security code, six numbers, which must be entered in iTunes and here even every time I sign my Apple ID and password. I thought it was a done deal in obtaining a security code. I never if I receive a new security code to each time.

    This is part of the two verification step for Apple ID - Apple Support two-factor authentication

    If you cannot connect with two-step verification using your Apple ID

  • When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

    When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

    Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »

  • The scroll feature does not work on my mouse.  I installed new batteries, but it still does not.

    The scroll feature does not work on my mouse.  I installed new batteries, but it still does not.

    Look in the system Prefereces - mouse and make sure the scrolling feature is set up how you want. If the action still does not work, please reset the SMC and the PRAM by iMac SMC and the PRAM reset

  • Firefox does not open a new, secure login page, on the site of my Bank

    Site Web of my Bank opens a new, secure, log in page from a link on its home page. When I click on this link to do, nothing happens. No window opens and Firefox does not all messages as to why. He used to work, but stopped in the past two months. I don't know if it something in my settings or not. I also use the Flock browser - which is based on Mozilla code and the link works in this browser. Settings in both browsers seem to be the same.

    URL of affected sites

    http://banksa.com.au

    I get the login window in Firefox.

    It uses javascript to open the window. Try hitting control + F5 - that recharges all of the scripts in case one is corrupt in the cache.

    You have additional modules that may be blocking scripts? Adblock Plus, no Script...
    If so try to disable them.

    Try safe mode
    The problems of Firefox in Mode safe

    See also
    Troubleshoot and diagnose problems in Firefox

  • How can I install new windows on NB200-10z without a CD player?

    Hello

    I have a mini computer "Toshiba nb200-10z" and is no more startup.
    I would like to make a recovery, but it does not work.

    I know there's a shortcut like press 0 when the laptop starts.
    With this shortcut, you can start the recovery in order to reset the software.
    But when I press the 0 button it gives me an error.

    So I think that the recovery disk/partition is lost.
    How can I install new windows on this minilaptopUri without a CD player?

    Hello

    Try this procedure:

    How to recover a Toshiba notebook with the HDD recovery procedure
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    If this does not work, you can try to install Windows 7 with USB flash memory key.
    There is a nice tool from Microsoft called Windows 7 USB/DVD Download Tool
    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    You will be able to download (you will pay for the iso file) an iso file and would be able to create a bootable USB key.

    Here's a nice instruction how to install Windows 7 on USB
    http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
    but in this case you need a new installation of Windows 7 DVD
    ?

  • Satellite M70-340 - cannot install new windows

    Hello world.

    I had the problem in my laptop. DVD-RAM (mast * one device dvd ram uj - 841 s ata) not work and now I have problem to install new windows on my system! The my laptop do not support USB boot, I can't install USB also.
    I want to know how I can buy compatible DVD RAM for my laptop.

    any suggestion or website link, please add.
    Thank you

    Hello

    Are you sure that your CD/DVD drive is faulty? I want to say have you tried to boot from the Windows disc?

    Usually, you can order a new reader service authorized in your country. Guys offers a new drive and an Exchange if you n t want to do it yourself. Just give them a call or an email, I m that you can clarify this issue with them! :)

Maybe you are looking for

  • Remove some programs from running at startup

    How can I remove some programs from running at startup? for example, Super Anti Spyware, automatically runs on startup and is listed in the lower right corner of my desk drawer, but it really slows my time to go on the internet. I only have access if

  • Unable to complete the restoration of the system after opening a document

    original title: I think I have a virus that came in my folder of document called "Bethel."... "There were three docs.  When I opened the first, I no longer can restore to an earlier date of my system operations.  What should I do?   Thank you!! I hav

  • cannot get my dv9000 9817 cl vista o/s with discs of hp (1 & 2)

    After about 4 hours of messages successfully, I couldn't install Vista on my computer. Last message "windows could not complete the installation, restart". He went through: 1. the recovery is complete 2. installation of the HP software: software is i

  • Requirement of certificate KeyUsage for ActiveSync

    I have a RT Surface and a Nokia Lumia 920 (Windows Phone 8). The Mail app works fine on my Nokia Lumia 920, I installed the enterprise root cert and also my file PKCS #12 (P12) personal, and the phone now syncs with our company very well Exchange Ser

  • Lightroom crash

    Since I installed the latest version of Lightroom to creative cloud, very frequently, it crashes ("crash"). Window of I'm on 10. I constantly have to restart. If I delete it and find a new creative cloud of Lightroom in, how do I do and what is this