Install NT4 on Satellite Pro CDT420

Similar Questions

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Cannot start WXP installed on my Satellite Pro A60

  Hello

  I just got a Satellite Pro A60 of second hand. He had installed xp pro, but I did have no password. , so I formatted the drive and made two partitions. There are 30 GB and the other approximately 7 GB.

  I tried to install a WXP Pro copy that has worked for me before, but he would not complete the installation. Now, I have a Toshiba Recovery disk. When I use the recovery CD, the installation goes fine, but when its full and restarts, the laptop does not start in Windows.

  He comes to Toshiba screen twice then WXP logo appears for a moment about 10 seconds or more, then go back to the f8 screen. Last time, he said it could be due to a hardware change with these lists of 'safe mode' options, safe mode with command prompt mode implementation network, security, last known good configuration. I tried all the but still cannot boot into windows.

  The hard drive has the files I used l-soft active@killdisk unerasor tools, change password and partition Viewer, I could see the file system of windows etc. Laptop has 512 MB RAM, 40 GB drive HARD, Celeron.

  I just updated the bios to V1.90 by CD-ROM. Please can someone help me?
  Thank you

  Post edited by: selftought

  Post edited by: selftought

  Hello

  You have installed the operating system from the recovery CD Toshiba but have you used the original Toshiba comes with this laptop recovery CD?

  The BSOD appears mainly due to hardware failure or the software flaw serious
  The Toshiba Recovery CD contains all the drivers needed and tools, but if you use a recovery CD badly the pre-installed drivers can cause the error and BSOD could appears.

  However if some hardware like the memory module or the graphics card is damaged the BSOD are included also.

• Can I install ConfigFree on satellite Pro 6100?

  Can I install ConfigFree (& which version) on my
  Satellite Pro 6100 P4 - M 2.0 GHz/XP Pro/15.0 "TFT/60 GB / 256 MB/CD-RW-DVD-ROM/LAN/Wi-Fi/BT?"

  Hello

  As far as I know that the free Config was not preinstalled on this unit.
  You can find this tool on the CD of tools & utility?
  If this is not the case, there is therefore no configfree for this model of laptop.

  Concerning

• Can I install WXO on Satellite Pro L300-22N?

  Hello

  I have a question:

  Can I install win xp pro / Home on Satellite Pro L300-22N? It has Vista Home Premium on it now and I don't like this system, I wonder if it supports win xp.

  Please I need to know the fast awser.

  Concerning
  HFH-Dataservice

  Hello

  Of course, you can install Win XP why you think that you can not install Win XP?
  If the laptop is able to run Vista installation Win XP shouldn't be a problem.

  See European driver of Toshiba.
  You can find some Win XP drivers too

  PS: before install you Win XP, you must create the recovery disk!

  See you soon

• Driver chipset XP will not be installed in the Satellite Pro L20

  Hello

  I recently rebuilt my Satellite Pro L20 to finally give my father in law.
  I installed windows XP home on it and have currently installed SP2.
  When I try to install the software of the chipset of the official region on the Toshiba site he says that my operating system does not meet the criterion even though windows XP is listed in the readme file.

  Please help as this is supposed to be a Christmas gift!

  Thanks in advance

  Rick

  Post edited by: rick_monkey - spelling!

  Hello!

  Have you really downloaded the correct driver? For this model are XP and Vista drivers available so I think that you had to download the wrong driver.

  Try again, maybe the download file is intact. If it doesn t work once again, you can download the driver also from Intel.

  But normally you have a Toshiba Recovery with all the drivers and tools disk. Install from this disc and you have a clean and ready installation.

  Good bye

• Installing XP on Satellite Pro L300

  I already did some research and came across this thread
  [t 26040]
  who has some interesting information.

  However, it is believed it I don't format the HARD drive after using the Intel Matrix Storage Manager Manager.
  How am I to install XP on the computer and wipe Vista in the process even if I can't format the drive?

  If I do not format the drive I find wih vista still be there while I install XP. I received a bunch of laptops to the school, I work to untangle and install programs, etc, however that was purchased for me is machines with Vista basic which is bloody useless.
  I have the machine's Satellite Pro L300.

  A clearer explanation of what to do would be really convenient.
  Also, in addition to the driver manager, do I need specific drivers for the HARD disk?
  I can't find anything like this in the pages of pilots for the L300 Toshiba.
  Thank you

  Roy

  Well, the XP installation is very easy.
  Some forum posts describe this procedure too.

  You read that the HARD drive should t be formatted after including the SATA driver. This is right. This means that you shouldn't t change all partitions and must format the C partition prior to installing XP.
  But you can easily install the XP on the same partition as Vista. The new facility will replace the Vista operating system and installation of XP would go you smoothly.

  The second possibility is to integrate the SATA driver in the OS XP using nLite as already mentioned above.
  nLite would create a new XP CD and would include the SATA driver.
  Then, you would be able to begin the Xp installation using the new CD and format the HARD drive and create or delete partitions.

  Easy ;)

• Installing Win7 on satellite Pro L450D

  Hello

  I just received a Satellite Pro who has been completely erased hard disk including the hidden restore partition. How can I get windows 7 on the hard drive to make it work again?

  I bought a genuine copy of windows 7 from the store, but it gives me an error message when you try to install.

  Any help gratefully accepted.

  Before you begin installation OS set the BIOS default settings initially.
  What message you see on the screen?

• Cannot install WinXP on Satellite Pro A200 - No. HDD

  Hello

  Please can someone help me. I just brought 52 portable Satellite Pro A200. They come with pre-installed Vista, but I want to wipe and install Windows XP. However, I have a big problem - when I put my XP CD in and start it, then click on enter to continue, he tells me that the Installation cannot continue until Windows cannot find any hard drives (although I can boot under Vista so I know that the HARD drive are ok).

  Thanks for looking,

  Matt Courtman
  Cromwell Community College, UK

  You must install the Intel Matrix Storage Manager.
  This driver can be found don page Intel:

  Please also check this thread. It s very useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

• Cannot install the Modem Satellite Pro A200 XP driver

  I'm a local network for Newbold College administrator. New mobile A200 and we need XP Pro on some of them. I tried to install the modem driver as one of the last drivers downloaded from the website of European support. I also tried the Canadian site as well.

  The driver installation program does not appear to do anything. I tried to manually install the driver for a Windows modem Agse/Toshiba software modem, but I have com port problems and I can not quire of the modem.

  Can someone help me please!

  Hello

  What to say; I checked the driver Toshiba Europe page and found all the drivers XP necessary and important for the Satellite Pro A200.

  Please note that the European driver Toshiba page provides drivers XP 3 different satellite Pro A200 series! There are PSAE1, PSAE4 and PSAE7 series.
  Please choose the right!

  In addition, you will find a txt file of installation instruction on the page of Tosh.
  In this file, you will find a good and important driver installation order! Please follow these steps!

  I put t know exactly why you get the modem com port problems but I guess a new installation of XP and the driver should fix this strange problem.

  Good luck

• Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

  History:

  I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

  IV ' e read on the internet that I need Intel storage driver manager...

  IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

  I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

  The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

  How can I make it work? It is that I can get.

  I DON'T WANT BACK TO VISTA - HELP!

  This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

  However, worry guy. I have a solution ;) (jeaaa: D)

  Try to create a new XP CD using the software called nLite!
  Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

  For details and how to use the nLite please Google because there are a lot of useful Web sites.

  Good bye

• Some devices are not correctly installed on the Satellite Pro A200

  I have the Satellite Pro A200 psae7e. and I also have a problem with the PCI memory controller, Modem device on high definition audio bus, mass storage controller, because they are marked in yellow in the Device Manager.

  My knee works fine... sata works fine, graphic controller & etc. Everything in the natural order. but I don't want the yellow icons in Device Manager.

  How to solve this problem. I installed all the drivers, but there is still that the yellow icons that appear.

  And could someone tell me what is the PCI memory controller? Is that the shared memory?

  PCI memory controller is Intel Turbo Memory, also called chip logic Intel Flash cache
  It s a new technology designed to support the new features of Vista.
  There is no driver for Windows XP because XP doesn t supports the cache feature.

  The component of embedded controller compatible ACPI Microsoft supports the Advanced Configuration and Power Interface (ACPI) AC adapter device objects that the operating system uses to manage the resources of power.
  Seems that you BIOS does not support this!

  Update the BIOS to version XP!

• Re: Microphone completely after installing XP on Satellite Pro P300

  My father bought a Satellite Pro P300 that I went down to Windows XP by using the included CD/DVD.
  Later, we found that the internal microphone is very quiet when we tried to use it.
  We need to yell into the microphone to get any sound at all, more like sounds random blip. Type the microphone sounds more scratch.

  All other sound effects are great. speakers work fine. We connected an external microphone to the mine in the laptop and video calls worked without problem, the problem is only with the internal mic.
  I saw that someone else has the same problem in the forum (link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=33844&tstart=0]), but it does not say how or if this problem has been resolved.

  I would really appreciate if someone could give me the fix or a link to the fix to our problem other than plug in an external microphone.

  Hello

  Windows XP supports a microphone amplifier. Have you enabled it?

  Go to control panel-> Audio & Sound Devices-> advance tab press Volume button

  Optionally, select advanced controls

  Then you should see the volume of the microphone. Please set it to a higher value.
  In addition, press the advanced under the microphone button.

  Here, you can mark the micro amp.

  Concerning

• Need help with installing Linux on Satellite Pro A300

  Hello

  I would like to install Linux on my laptop and am wondering which is the best distribution I can use and is it simple to follow guide to use so I'll get to the top and running with a dual boot with Microsoft Windows Vista?

  Please help because it is really important to me!

  Appreciate your help in advance.

  Thank you
  Bill.

  Hello

  To be honest I didn't install Linux on my laptop with Vista and XP.
  Sometimes, I use Linux Live distribution called Koppix, and I m satisfied!

  The devices have been recognized, and most of the drivers were included.

  Maybe it s an option for you too

  But Ubuntu might also be interesting for you.

  Check this box:
  http://www.Ubuntu.com/

• Unknown devices after installing Vista on Satellite Pro U200

  Yesterday, I installed vista ultimate, but unfortunately my U200 is not compatible with vista because the tile would make me believe.
  What does not work I have identified to date:
  -Speakers and headphone jack
  -Function keys
  -Fingerprint reader

  Almost any of the included toshiba software installs even after disabling "control of Application Security."

  Does anyone know where I can get the new drivers and software or when they become available?

  Otherwise really like Vista. It is very reactive and simplifies many tasks. This is very pretty too, but this isn't my priority.
  Any help gratefully received
  See you soon

  This might help others with similar problems. I was able to get evrything working except my shortcut keys.
  http://www.csdsupport.Toshiba.com/TAIS/CSD/support/windows_vista/vista_beta.cgi?lsAction=list_files&model_id=30