Install Oracle GoldenGate Linux to synchronize two schemas from database on a single server

Similar Questions

• Synchronize two schemas from database on a linux server using Oracle GoldenGate

  I followed this guide ( http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/goldengate/12c/OGG12c_Installation/index.html?cid=9167 & ssid = 0 ) and for two different databases running on the same instance of database schemas.

  
  What I have now is a Linux server with two Oracle database schemas. I have access through my Linux virtual machine. I want to do the synchronization possible between them.

  I use Oracle GoldenGate to make this possible. What should I do now? Goldengate is must be installed in the server too? I'm totally new to this situation. Can someone give me at least the major steps before going to the more comprehensive study?

  Well understood. This helped.

  Install Oracle GoldenGate Linux to synchronize two schemas from database on a single server

• Where to install Oracle GoldenGate?

  Hi all!

  In order to CONSOLIDATE the data of 5 databases (3 MS SQL server and 2 servers Oracle) in a single Oracle DB where Oracle GoldenGate should be installed?

  The "Installation and Setup Oracle GoldenGate for SQL Server" States:

  "For a Microsoft SQL Server source data capture, Oracle GoldenGate must be installed on the database server. Do not install it on a remote server. »

  However, is not clear to me what 'remote server '. What is the MS SQL Server?

  Also to copy the data from the 2 Oracle servers where OGG should be installed? The source servers or in the target server?

  Thank you for your time.

  Emanuel

  You get confused about the terms used here

  This document means for the extraction of MSSQL, goldenagte must

  be installled in the same server this database resides on, IE the database

  Server.

  During extraction of Oracle database, logs can be sent to a staging

  Server and then extracted, or can be extracted from the database server

  himself. In other words, extracted can be installed on the database server (normal

  extract) or the staging server (extract from ALO)

  -Lexman

  Wednesday, April 15, 2015 to 18:27, community-admin

• Installing Oracle on Linux

  Hi all
  
  I installed Oracle 11 g on my Centos machine. I have the following problem: I put the environment variable in a terminal as user oracle.
  But if I start another terminal as the user x environment variables are not detected by this terminal session and I can't start sqlplus.
  How can I configure them permanently?
  
  Thank you

  844183 wrote:
  I have not yet set up a database, I'll do that later, for now, I only installed the software of database

  I want to be able to run and connect to the database regardless of the user

  If I create a new user, I want him to have access to the database by default, just like on Windows

  You're not in Kansas anymore, Dorothy.

  First of all, the model overall / authentication of the user used by oracle is not like Windows and SQL Server.
  Second Linux is not something like Windows (fortunately!) Linux is an operating system multi-user true, from the ground up.

  Regarding your environment variables, it goes back to the design of Linux (and Unix). Each user of the OS gets its own directory. This directory must be a file named '.bash_profile '. (the main point in fact a hidden - file does not appear from a normal ' ls' order unless you add the switch - a). When a user logs on to the operating system, the .bash_profile located in the home directory of the user is executed. For the user 'oracle' has its own copy, 'x' the user has its own copy, user "joesnuffy" has its own copy. What you do in /home/oracle/.bash_profile has no effect whatsoever on 'x' or 'joesnuffy '. If you want "x" to get something, you have to put in home/x/.bash_profile. If you want "joesnuffy" to get something, you put it in ' / home/joesnuffy/.bash_profile'.

  because variables are not visible to x, I can't start sqlplus

• Install Oracle on Linux

  Hi all
  I installed Oracle 10 g on Linux.
  
  But I am not able to connect.
  
  When I do the sqlplus query, I get the below error:
  
  Enter the user name: virtue sysdba
  Connect to an instance is idle.
  
  SQL > select * from v database $;
  Select * from database v$
  *
  ERROR on line 1:
  ORA-01034: ORACLE not available
  
  or
  
  
  SQL > startup;
  ORA-01078: failure in the treatment of system settings
  LRM-00109: could not open the parameter file ' / u01/app/oracle/product/10.2.0/db_1/dbs/inittestdb.ora'
  
  
  Please advice.
  
  Thank you
  Ashwani N.

  Details of the message of pl of the exact versions of "Linux" and "10g". Check that there are no error messages in the logs of installation?

  The error message seems to be explicit - the instance could not be started due to a missing init.ora file. Have you checked that the file and the directory exist (for ' / u01/app/oracle/product/10.2.0/db_1/dbs/inittestdb.ora'), and that the permissions are appropriate?

  HTH
  Srini

• Oracle Application Server 10g R2 install Oracle Enterprise Linux 5

  Hello...
  
  I want to install Oracle Application Server 10g R2 on Oracle Enterprise Linux 5. Can I get an installation instructions (or not) why?
  Oracle installation guide mentions Suse 9 & 8 and Red hat 3 & 2. There is nothing related to Oracle Enterprise Linux 5 or 4?
  
  Thank you

  See Note: 564174.1 on MetaLink.

  Thank you
  Shail

• installing Oracle on linux - rhel5

  Hi all
  
  I intend to install oracle 10 g 2 on linux. the machine is an intel x 86 with rhel5 installed machine. I have oracle v not installed Linux before.
  
  the requirements of State that I need the following
  1 * 10201_database_linux32.zip (Base software)
  2 * 10201_companion_linux32.zip (companion software)
  3 * p6810189_10204_Linux-x 86.zip (Group of hotfixes)
  
  I have the first. but I can't see 2 and 3 on the oracle website! I don't have access to Metalink v.
  
  juice wanted to know if oracle can be installed without companion software and the Group of hotfixes.
  
  Thank you

  Yes, not recommended but... oracle can be installed without companion software and the Group of hotfixes.
  : p

• Need help to install Oracle 10.2.0.5 on Failsafe 3.4.2 on Windows Server 2008 R2 x 64

  Hi all

  I'm trying to build a cluster ON / OFF on Windows Server 2008 R2 x 64 using integrated security. The Oracle DB I install is EE 10.2.0.5.

  I have Oracle 10.2.0.4 and Patch 10.2 . 0.5 so install Oracle, it seems not to be a problem. The problem is with Failsafe.

  I downloaded the version 3.4.2 because with version 4, I can not add 10g (I can't upgrade to 11 or 12) DBs.

  I ask you, is there a good way to build infrastructure because I'm having a LOT of trouble to install everything?

  I have to install Oracle DB using local administrator because my domain account (which has Admin rights) cannot.

  I have to use my domain account to manage the Cluster because the local administrator cannot.

  I am all confused and it does not work everytime I try to add a resource to integrated security.

  So I need something like a short list to understand the correct sequence to install. Something like:

  Step 1: Install Failsafe on both nodes using Local Admin

  Step 2: install Oracle EE on both nodes using Local Admin

  Step 3: Create DB on the first node using Domain Admin

  I hope someone can help!

  Thank you!

  Ok! Found the solution. And of course it was a Windows problem and not Oracle. I just had to go to "Control Panel"-> account-> user account (Yes, 2 times)-> change user account control settings and put the bar you on the left to never notify. Restart the server and here! More no popups for administrator rights!

  You see them all!

• How to install two copies of Symantec on a single server

  I have Symantec endpoint 12.1 and installed on Server 2008 for 10 users and I have another copy also 12.1 for 10 users, so I put 2 copy on the server? If no WHAT I HAVE TO DO?

  You need to ask Symantec directly for advice and support for their products.

• Two-way replication in two databases in a single server

  I have two instances of installation OGG, one for each database. Let's say that they are respectively OGG1 and OGG2 for DB1 and DB2. Ogg1 has two extracts and OGG2 has 1 replicat for replication of the first. It works well independently.  OGG2 has two excerpts and OGG1 1 replicat for replication of the second, which is for the direction of backword. It also works well independently. As I got to know previously, this is how I do two-way replication, by running these two processes together. I did it.

  But when I did, it gives me the desired result. What currently happening given cannot be changed in one of the databases. When the data changes, it shows the change. but when committed, itself data is modified in its original values. What's the harm? Two processes works well independently.

  
  

  ORASCN Hi Vicky, you were the subject of this question with me. It's good if you can have a look.
  

  Yes, that was the problem. I added "TranLogOptions ExcludeUser ogguser" the main excerpt from two replications. ogguser is my user goldengate.

  Extract einta1q

  SETENV (ORACLE_SID = "dd")

  UserIdAlias ogg_user

  TranlogOptions IntegratedParams (max_sga_size 256)

  TranLogOptions ExcludeUser ogguser

  Exttrail ./dirdat/ip

  LOGALLSUPCOLS

  UPDATERECORDFORMAT COMPACT

  Table SC2.*;

  Now looping does not occur. Replication is as expected. Thank you.

• Generate the schema from database

  Hello:
  
  Version 3.0.0, build 653, which is 3.0 ai2 if I have the right name. Come help - about version information.
  
  We did something in the designer and I would do the same in SQL Data Modeler, it is possible, or use a workaround to a minimum. It is something we absolutely must have before crossing the designer DM.
  
  We receive sets of customer data and import them into a schema. We then open a Designer session, tables we have made DDL changes for some time, click on generate, choose the target containing up-to-date data schema, but old DDL and then click OK to merge the latest repository DDL changes in the schema with the new data but old DDL.
  
  Here's what I know how to do now. I captured the ddl DM Designer with success. I also captured the schema of the database with customer data fresh successfully DM. I think I'm pretty close. I was also able to compare and see the DDL differences using tools - model comparison/merging of views. The problem is that when I click on the DOF preview at the bottom of the dialog box to compare, one containing the differences found, the button pulls up to the DDL file editor dialog box but it is empty/Virgin. So my question to point how do I get a ddl file so I can run it against my client target data schema? I guess that the direct method, I have noted above is therefore more an option, because I read in a post here somewhere.
  
  The output of compare models also includes the differences with the names of the constraints generated by the control system, which will always be different between us and our customers. We don't care merge these names of check constraint and want to exclude the ddl file switch off. Is there a way?
  
  Thanks for any help.
  
  Love this new product so far. Excellent work.
  
  Doc

  Doc,

  Thanks for your comments.
  Problem with DDLSelection.local is fixed, the fix was a few minutes later to enter in 653.
  Compare maps - window is empty because you have not defined mappings.

  Philippe

• Two databases on a single server - CPU allocation

  Is there a way of CPU resources between two databases in the same way that the resource groups can allocate resources within each database? Let's say split 60-40 between databases cpu?

  The answer is no. I think, it seems that you encounter a performance problem, and you try to solve it using process priorities. Am I wrong? Or I'm going to upgrade my crystal ball?

  If you were never able to do such thing, the first thing that comes to mind,... what you define as "the database" here, you do not have something you can touch and say "it's the database", the concept of database is a logical, not a physical concept, it is composed of memory, processes and files , and the main activity has to do with e/s where most of the time the problem of startup performance. even if you were able to abstract the logical concept of the DB in a single physical component, allocating CPU him would not be enough to solve performance problems.

  I strongly suggest to detail why you want to do this assignment and then we can discuss alternatives from there on.

  ~ Madrid
  http://hrivera99.blogspot.com

• want to extract two values from rows in a single sql result

  Let me first of all explain the situation
  
  I have two tables
  1 Animal_details(animal_id,and other details)
  2 Animal_weight(animal_id,seq_no,weight,date_weighed)
  
  in fact situation here is that for each weight I am inserting a new line with seq_no say
  1 for the first weight
  2 for the second weight...
  with their weight and date
  for example. animal_id = 1 seq_no = 1, weight = 200, date_weighed = 12-may-2000;
  animal_id = 1, seq_no = 2, weight = 250, date_weighed = June 12, 2000;
  
  means seq_no = 1 represents 1 weight of animals
  seq_no = 2 represents 2 weight of animals
  
  how an animal can have any number. weighted times.
  
  now what I want, I want to show a result with
  
  animal_id, weight_1, weight_2 with other animals details in a single line
  
  How can I get first weight and the second or more weight in the same line for any animal?
  
  Please answer soon, its urgency.
  
  Thank you

  You cannot issue a SQL with dynamic column list of 100%. What you can do is something like the questions:

  with t as (
             select  animal_id,
                     max(case seq_no = 1 then weight end) first_weight,
                     max(case seq_no = 2 then weight end) second_weight,
                     max(case seq_no = 3 then weight end) third_weight
               from  animal _weight
               where seq_no <= 3
               group by animal_id
            )
  select  t1.animal_id,
          first_weight,
          second_weight,
          third_weight,
          other_details
    from  t t1,
          animal_details t2
    where t2.animal_id = t1.animal_id
  /
  

  SY.

• Install Oracle database (software) with script avoiding xWindow on Linux.

  Hello
  
  I need to know that how can I prepare a script to install the Oracle (oracle software) database on a Linux specifically on SuSE Linux 10.
  
  Well, I have installed Oracle on Linux machines using runInstaller script, but the problem with this script is the Xwindows. It's a tedious he needs of Xwindows and remote access. That's why I need to know how could I write such a script, and should not be all Xwindows/xserver.
  
  Would be great if there is a possibility to get an example script.
  
  Thank you and best regards,
  
  Arshad.

  user8336002 wrote:
  Sorry not to mention version. Its Oracle Database 10g Release 2 (10.2.0.1.0).

  Silent install still works. You need not an active X windows, even if you need X installed for older versions of Oracle runInstaller

• Installing oracle 11g R2 on windows vista

  Hello
  
  I am looking for oracle 11 g R2 installation for my personal use on my computer windows vista laptop. Kindly advice from where I can download and install the same.
  Also, I heard a necessity to check if its system is 32 or 64 bit for compatibility.

  As indicated in the Installation Guide, Vista Home edition only is not supported. If you cannot use Win XP, your best bet is to install Oracle VM (free downloadable on http://edelivery.oracle.com/oraclevm), then install Oracle Enterprise Linux (free downloadable on http://edelivery.oracle.com/linux), then install your software GR 11, 2 in the OEL VM. Use Google to search for articles that document installation all these pieces of software.

  Another option would be to switch to Win 7 Professional, enterprise or Ultimate editions. See the Installation Guide link I posted above.

  HTH
  Srini