Install Redhat RHEL 6 on IdeaPad Z565 suspended

Similar Questions

• Lenovo Ideapad z565 - how to check and activate the virtual technology (VT) in BIOS

  I tried to use virtualization on my Lenovo Ideapad z565 laptop. The laptop is running only Windows 7 Home premium 64 OEM installed. It's an AMD processor dual core. I tried to get some VMWare images into VMWare workstation running on my laptop. Images VMWare has always seem to crash when you try to start them. I read on various forums that this is probably due to virtualization (VT) 'No' enabled in the BIOS. It's supposed to be set in the "Advanced" section of the BIOS. The problem is that when I check my BIOS (F2), the option of virtualization technology (VT) is not in my BIOS. I have a very limited set of BIOS options. I read that the manufacturers of these machines 'block' the user to access advanced options in the BIOS (for reasons unknown to me). In addition, there is a utility distributed by Microsoft, called the "Hardware Virtualization Detection Tool support" that you can download and run on your computer to check if the hardware support for virtualization (VT) is enabled on your computer. I ran this and it is said that VT 'is' activated on my machine. However, I have seen other users, this tool is known to report false positives... which means it reports that VT is enabled, even if it is not. I have also read that these laptops Lenovo, this hardware virtualization is "off"by default. So I think that's my problem. Material to virtualization is disabled in my BIOS, and I have no way to access to 'permit' or turn it on. Someone out there has any experience with this problem, and how did you work around it? Is there a utility that will allow me to enable hardware virtualization in my BIOS? If so, can you provide me with detailed steps to do this? I would really appreciate it. Thank you.

  
  

• How to install RedHat OS in Vmware

  Hi all

  I have VMWare Fusion Professional Version 7.0.0 (2075534) that runs on Mac,.

  Now the problem is, I'm unable to install redhat 5 iso image OS on VMWare, whenever I have start installation it got stuck (attached the screenhot) and said that the iso Linux invalid. but that can be installed on VMware that runs on windows 7.

  So I do not know how to install and what iso are used, please advise.

  Thank you

  Srinivas

  Hello Eveyone

  Thank a ton for all of you who have helped solve my problem, finally downloaded the CentOS and successfully installed and so far I have found no difference b'w RedHat and CentOS to see in the future.

  Thank you once again

• Install RedHat v 5.5 on PE R720, disk drives not found during installation

  Hey community,.

  I am trying to install on a R720 5.5 HR.  It has 8 disks (500 GB) install, I set them up as two raid 0. First raid is two disk for the system, the second raid is configured with 6 other data in raid 0 disks.  I went through the raid configuration and the configuration of the life cycle.  They are configured to use the BIOS.

  Any configuration, I've set up install RH does not see disks at all.

  I can't understand why and how to solve this problem.

  Thank you

  cosky

  Cosky,

  With the R720, as well as all other 12th generation servers, the version of RedHat minimum supported is 5.7.

  So the problem is probably due to the pilot in this version is not compatible with the new controller.

• problem installing RedHat 6.1

  Hello
  
  I'm installing biee 11 g on redhat 6.1(OEL 6.1)
  
  However, an error occurs in the due diligence
  
  The messages are as follows:
  
  Problem: This Oracle software is not registered on the current operating system
  Recommendation: Make sure that you install the software on the correct platform
  
  Y at - it a solution for the error?
  
  Redhat6.1 should not support?

  Hello

  Red Hat EL 6 does not obiee11g. Please go with below the requested version.

  http://total-bi.com/2010/09/OBIEE-11g-supported-platforms-and-operating-systems/

  Thank you

  Deva

• Problem installing windows XP on the IdeaPad G550

  Last week, I bought lenovo G550. It came with Windows Vista. I want to install Windows XP on it. I found that lenovo has driver for windows XP, which will make my life easy :-) But when I try to install windows XP last night, I got blue screen several times. I get a blue screen after Windows XP loads all drivers (status winidow in installing windows XP displays "Starting windows xp setup") and he pours (blue screen). I ran chkdsk and diagnosis of memory and both went really well (not reported no error).

  Is someone else has encountered the same problem? I have a stupid mistake? Please help me

  Your response is much appreciated.

  Thank you

  Noémie

  Welcome to the forums

  You should maybe spend in compatible mode ACHI sata in bios yout and check again

• How to install redhat enterprise 2 disk images 6

  The installation package for Red Hat Enterprise 6 64-bit is available in 2 iso images, one to boot from and the other and most importantly, has the rest of the installation of the files. Start with the boot image is fine, but then he called for the second disc and the question arises. How to direct the process of watching the second iso image to continue the installation?

  Just to be clear, it's an installation disc, that is to say, iso images are on the hard drive.

  Thanks for your help.

  The virtual machine has a CD-ROM drive.  That's what you use to connect the ISO image to the virtual machine to install the operating system.

  I do not know the exact clicks, menus, icons, etc. for the merger... I know that desktop and Player under Windows.  But the tasks remain the same.

• OS packages require to install on RHEL 5.0 10.2.0.2

  Hi all
  
  I get almost all of the documentation for the installation of the Oracle OTN customer for installation 10.2.0.2 on Red Hat Enterprise (RHEL 5.0, 32-bit and 64-bit) edition
  
  Can you please guide me where can I get the need for OS packages for the customer oracle on RHEL 5.0, 32 and 64-bit?
  
  Thank you
  Vikram

  RH5/OEL5/Oracle VM x86_64bit Metalink notes Doc ID: 421308.1
  RH5/OEL5/Oracle VM 32 bits Metalink notes Doc ID: 419646.1

• the expected time to complete an ibwrite.

  I have a question about the "scheduled" to complete a call to ibwrite.

  Here is a code snippet... This code works well but the question I have is regarding the time required to complete the call.

  Synchronization of data below were collected with a HP XW8600-dual NI488.2 installed RedHat (RHEL) 5.1 running. with the NOR-488 driver. 2 2.5 - Linux - Beta 32 Bit with gcc 4.3.3.

  I would be very interested in someone elses performance on Win32/Linux platforms with OR and/or 3rd third-party drivers.

  Code snippet that produces this chronology...

  Note the mIEEE488SpirentGPS.dataToWriteOut variable is a string that is approximately 200 characters in length.

  case IEEE_488_IBWRT:

  Start the timer of Scripture
  StartTimer (2, writeCaseTimerName);   From a timer (0.6us to start/stop)

  write data to GPIB
  If (( State = ibwrt (mIEEE488SpirentGPS.unitDescriptor,
  (char *) mIEEE488SpirentGPS.dataToWriteOut;
  (mIEEE488SpirentGPS.writeCount)) & ERR)
  {
  Place the error message error parameter member & error report to user
  HandleIbwrtError (SPIRENT_GPS_BOARD_IDENTIFIER, status,

  (char *) mIEEE488SpirentGPS.dataToWriteOut;
  fileAndFunctionName,

  (char*) mIEEE488SpirentGPS.errorMessage);
  break;
  }

  stop the timer of Scripture
  StopTimer (2);  / / Stop timer (0.6us to start/stop)

  Here is the timer data reception after the race...

  Note an avg, min, max 38.9ms, 1.4ms and one time 67.6ms (respectively) to complete a call to ibwrite.

  See below for a histogram of time call...
   
  # data min/avg/max timer to timer (2) #.
  Name of the controller: IEEE_488_B_Local::RealTimeSpirentGPSTask - case of writing
  Average loop time (seconds): 0.038902582920
  Minimum a loop of time (seconds): 0.001380000000
  Maximum time (seconds) a loop: 0.067578000000
  Average rate for power supply of real-time loop: 25,705234 Hz
  Number of loops: 1007
  Error occurred in StartTimer: false
  Error occurred in StartTimer: false
   
  The histogram data indicate that 999 calls (excluding 1007) took between 10-50 ms and

  8 answered calls between 50-100 ms with the worst case being 67.6ms.

  All of this is consistent however, it is far too slow for the rate of update scheduled to this unit.

   

  Are these results compatible with other peoples experience/timing on other platforms?

   

  I need to have a time worse case of 3ms (with margin 1ms) in order to achieve a rate of 250 Hz message. Any comments or suggestions are welcome...

  I should move to scramnet?  This is my only other option for this device.

  # data histogram for timer (2) #.
  sim_uut_timer. Report histo t00, c00: 0,000000000: 0
  sim_uut_timer. Report histo t01, c01: 0.000000100: 0
  sim_uut_timer. Report histo t02, c02: 0.000000500: 0
  sim_uut_timer. Report histo t03, c03: 0.000001000: 0
  sim_uut_timer. Report histo t04, c04: 0.000005000: 0
  sim_uut_timer. Report histo t05, c05: 0.000010000: 0
  sim_uut_timer. Report histo t06, c06: 0.000050000: 0
  sim_uut_timer. Report histo t07, c07: 0.000100000: 0
  sim_uut_timer. Report histo t08, c08: 0.000500000: 0
  sim_uut_timer. Report histo t09, c09: 0.001000000: 0
  sim_uut_timer. Report histo t10, c10: 0.005000000: 0
  sim_uut_timer. Report histo t11, c11: 0.010000000: 999
  sim_uut_timer. Report histo t12, c12: 0.050000000: 8
  sim_uut_timer. Report histo t13, c13: 0.100000000: 0
  sim_uut_timer. Report histo t14, c14: 1.000000000: 0

  Ben,

  Thank you... when we did our development/calendar tests last week that we were using a power supply HP as a peripheral 'stand' for the real device and apparently feeds are very slow to respond...

  We tested with the real device today and all of the ibwrt were completed in sub 70us... .This is much better than the 68ms I get with food.

  This is the moment I was expecting...

  We tried the test controller controller and which gave results simular with the worst case of ~ 66us.

  Thanks for the help...

• Impossible to install RHEL 6

  Hi all
  I have a Dell Inspiron 14z 5423 Ultrabook. I have Windows 7 installed in it. I try to install RHEL 6 alongside windows.
  I've installed RHEL on most older PCs, but this one is new technology with 32 GB SSD + 500 GB HARD drive with the hybrid technology. I couldn't install RedHat.

  The SATA in the BIOS is set to Intel Smart Response Technology (aka RAID). I have about 80 GB unallocated space (as in the picture below: MB free, 82694) and when I try to create partitions (/ boot, / home, /...), then it displays the error message saying "not enough space" and the partition could not be created.

  

  

  Previously he also asked to reset the drive, but I clicked on ignore all because I have not saved anything.

  Please help me about the installation.

  Hi TusharKhatiwada,

  Linux does not support configuring mSATA. You will need to disable acceleration of the application of Smart Response technology since the office. Change the SATA operation setting in the BIOS to AHCI and install RHEL 6 on the 500 GB HARD drive.

  Please let me know if you need further information.

• IdeaPad Yoga 13 Windows 7 install

  I would like to install Windows 7 on my Ideapad Yoga 13. Windows 8.1 and I don't are not just get.

  1. I have driver problems?

  2. I still have the benefits of the touchscreen?

  3. If I want to go back to windows 8 at a time where my CD key is located?

  2 NO.
  3. in the BIOS, but you can't touch. The product key from the BIOS automatically detects Windows 8.

  Do not. Just install the classic interface on Windows 8/8.1

  http://www.classicshell.NET/

• Installing oracle on rhel on VM ifconfig

  Dear friends...
  
  I have install the virtual machine on windows xp, and in it, I install linux rhel 5,.
  
  Now, I read the steps to install oracle 10g r2
  one of the preinstallation steps is to check the IP address to put in
  
  / etc/hosts
  
  When the root Linux prompt, I gave the command
  
  ifconfig eth0
  
  I get command not found error message...
  
  Please someone help me...
  Thanks and greetings
  
  Published by: AAP on 18 February 2012 03:23

  I think there is a problem with your installation of linux, because these places of orders should be in the PATH of the root. Anyway, you can do this:

  1. open a session as root, run "/ usr/bin/updatedb '. It will take some time.
  2. When you want to find something, just type "find something", and the matches will be displayed:

  [oracle@ol6-112-rac1 ~] $ locate system-config-network
  /etc/pam.d/system-config-network
  /etc/pam.d/system-config-network-cmd
  /etc/security/console.apps/system-config-network
  /etc/security/console.apps/system-config-network-cmd
  /etc/setuptool.d/99system-config-network-TUI
  * / usr/bin/system-config-network *.
  * / usr/bin/system-config-network-cmd *.
  * / usr/sbin/system-config-network *.
  * / usr/sbin/system-config-network-cmd *.
  * / usr/sbin/system-config-network-tui *.
  / usr/share/System-config-Network

• 11.2.0.3 installation on oel 6.3 installed 32-bit binary

  cat/etc/redhat-release
  Watch
  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)
  
  uname - a
  .... 2.6.39 - 200.24.1.e16uek.x86_64... x86_64 GNU/LINUX
  
  uname-m
  x86_64
  
  We start just to test oracle install on rhel 6.3.
  We will install linux x86_64 oracle 11.2.0.3. The installation went smoothly, but when I went to install PSU 13923374 he complained invalid version
  
  Patch... is not applicable on the current platform
  
  a glance in oraclehomeproperties.xml show
  
  ARU_ID_DESCRIPTION > Linux x 86.
  and
  file oracle, sqlldr etc. appear only 32-bit.
  
  Successfully, I created a database and database v$ show 32 bit.
  
  If oracle compiled as 32 bits, which I didn't even know was possible for x86_64. I have successfully installed the same for Linux 5.6 zip files and it shows 64-bit.
  
  I wonder how to solve this problem and where oracle decided it was 32-bit. I'm surprised that it even compiled this way. I guess that I'm missing a library from somewhere but I don't know on what to look for.
  
  By resolve what I mean I'll uninstall and reinstall, but I want to compile in 64-bit.
  
  Any help is greatly appreciated.
  
  Thank you
  
  Mike

  Download the x 86 version of http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linuxsoft-085393.html, and not the version http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linx8664soft-100572.html x86_64

  You can pl publish the names of the files that have been downloaded for the installation of 11 GR 2?

  HTH
  Srini

• RedHat Linux on Ts140

  Hello

  I would like to buy a server TS140. Can I run/install RedHat Linux on this server?

  Red Hat is not an operating system with support for the TS140... which means that Lenovo has no drivers, etc. for devices for Red Hat. It will probably run if you have the right drivers.

• IdeaPad K1 - how...

  Hey everybody!

  Can someone tell me (as I am quite new to all this) if it is possiblefor someone to install Windows 8 to the Ideapad K1? Or maybe just a Linux OS?

  k2kofoniX wrote:

  Hey everybody!

  Can someone tell me (as I am quite new to all this) if it is possiblefor someone to install Windows 8 to the Ideapad K1? Or maybe just a Linux OS?

  No, the K1 is not running Windows 8 (in fact, it must be Windows RT, which is specially designed to run on ARM architecture processors).  The problem is that you must have a version of Win RT made just for the K1, with all the appropriate device drivers.  Those who are usually provided by the manufacturer of the device, and in the case of the K1, there is no such package.

  Linux may be more possible, especially since you actually use Linux on it right now (in fact, a Linux kernel, with the top Android ecosystem).  I don't know how well they work, but there are some sources out there for versions of Linux running on Android devices.  Of course, you're pretty much on your own.  For example, see http://linuxonandroid.org