Install SSL SonicWall NSA 220

Similar Questions

• SonicWall NSA 220 slow flow

  Hi all

  According to specification of 220 SonicWall NSA could handle a flow rate of 600 Mbps without security options and the only inspection of the firewall.

  We have recently acquired a 500 Mbps (up and down) line, so it was time to put this NSA220 to the test. And it has failed.

  The maximum through put has 175 top down and tried many things. I also tried by default with https://support.software.dell.com/kb/sw8119 of the instructions on how to get the throughput, but always to the max of 175 Mbps. Again, I disable all security options and their disabled in the configuration of the area.

  So I tried the following thing:

  1. Put my computer in connection to a laptop and start the transfer a SMB file. The result is a speed of 900 Mbit/sec.

  2. Put my computer on the local network of the SonicWall and the laptop on the Wan and tried again the transfer of the laptop (WAN) to the computer (LAN). Result: 175 Mbit/max.

  What am I missing or doing wrong?

  Please refer to the post
  http://en.community.Dell.com/TechCenter/security/network-mobile-email/f/4904/p/19610851/20825216#20825216

  I have provided an explanation on a similar question it.

• VPN at the request of iOS to the NSA 220

  Can I connect an iPhone or an iPad to a SonicWall NSA 220 with SSL VPN on demand and detection of trusted network?

  Read the Notes version and Guides on the link below, I think I won't be able to do so in part because the NSA 220 does not support the authentication of the client certificate, and these features are only supported on devices Dell SonicWALL E-Class SRA.

  support.Software.Dell.com/.../Release-Notes-guides

  I would like to know if it will work before you buy the 220 of the NSA.  Or to add this support for client certificate authentication, SSL VPN on demand and detection of Web of trust in a future release?

  Thank you

  Hi Barret.

  Currently, the NSA does not support the authentication of the client certificate and which is required for the VPN feature at the request of iOS.  Currently iOS VPN on demand is supported for connections to the devices Dell SonicWALL E-Class SRA and SMB SRA.  There are more details and captures screen in the Mobile Connect for iOS 3.1 User Guide: https://support.software.dell.com/download/downloads?id=5642876

  It will be finally supported by the line of product of NSA as well but I have no available for this chronology.

• ASA5510 Migration of SonicWall NSA 2400 VPN/GW router

  Hello

  I'll need to migrate 1 router VPN/GW SonicWall NSA 2400 x to 2 x ASA5510 (need SSL - VPN, detection/prevention of Intrusion, Virus, Malware protection similar) behind 2 x 2921 Cisco ISR routers. He comes to office relocation and redesign of the network.

  Suggestions or comments? It's very appreciated.

  BTW:

  1. difference between ASA5510 and ASA5520?
  2. it's a good idea to use the Juniper VPN instead of ASA5510/20 box?

  Thank you

  Dengming

  Hi Dengming,

  See the data sheets for Cisco ASA 5510 and 5520. You will find all the specs of the device and there is a feature to compare devices as well.

  See you soon,.

  Nash.

• How to install SSL certificates on ESXi 4.1 hosts?

  I am in a DoD environment and need to install SSL certificates for each of our ESXi hosts.  I may have missed it, but the only one of the official instructions, I can find are for vCenter (Windows).  These must be installed on the current host.

  I have the two Base64 as the pkcs7 (p7b) formats, but prefer to use the pkcs7, since it covers the complete certificate chain (which is important, because DoD case are not part of the standard certificate store).

  Instructions/advice would be much appreciated!

  Hello

  Take a look at page 147:

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_esxi_server_config.PDF

  The chapter "Replace a default with a CA-Signed Certificate" is what you are looking for

  Concerning

• SonicWALL NSA, using VPN client overall comments to reach network of internal resources

  Hello

  I have problems performing Global VPN client to work when you connect to our internal network of comments in order to reach our internal LAN Server in order to reach internal resources in a safe manner. I'm not sure what could the settings were necessary in the Sonicwall to achieve?

  Our installation is based on the NSA 3600 and I installed a WLAN area in the sonicwall to enable clients to connect to the internet. Traffic in the WLAN area to our internal LAN Server is denied. However, some users would like to be able to use the wireless network in order to achieve internal resources and for that I want to use the Global VPN client. It is even possible to use of an internal network from the point of view Sonicwalls Global VPN client?

  The use of the outside Global VPN client works very well

  Any help is greatly appreciated and if more detailed configuration information are necessary, I'll happily give you that.

  Thank you

  Hi Ben,

  No I didn't at first, but your answers have would lead me in the right direction, hopefully. I realized that I could create a custom GroupVPN by going to the settings of the interface to the interface that is the war in the Gulf to my wireless network.

  return to results

  Thank you

  Cree

• See 4.5 Security server problems since installing SSL certificate

  I'm having some very strange problems with my view view connection Server 4.5 (front and back) running. I hope someone could shed some light on the problem, because I have tried everything I know to do this job properly.

  Before installing a certificate self-signed server of external connection again, I was running the default VMware certificate. Everything worked very well in this configuration. I installed a new self-signed certificate and now I'm having intermittent problems, the connection to the server:

  1. in the connection from a windows machine I CAN reach the site URL/HTTP to download the client from the view. Once I run the client to view I got the following error: failed connection to connect to the server view. Network error.

  2. I tried to connect via the IP address of the server, ensure that the external URL is correct (everything worked fine before the installation of the SSL certificate).

  3. completely removed security server and reinstalled, restart the services etc. Still not connect on some machines. Connecting from a Wyse compatible iPad still works, never a problem.

  4. If I connect the VPN of the company on the machine that does not work, then launches the Client to view and connect everything works as it should. When I disconnect the VPN and try to connect again, I can connect very well! So I need to connect to the VPN to connect to browse... its really weird. I checked DNS etc and everything is identical with the default certificate. I did so that machines that have problems approve the certificate and I also followed the Cisco ASA firewall logs, I do not see happneing anything different between periods of work and does not.

  Someone at - he never lived something along these lines or can think of anything I can try?

  Thank you!

  I came across this same thing.  The conflict is between the customer to view and your new self-signed SSL certificate.  More precisely the thing causing the problem is the version of the wininet.dll file provided with IE8.  The wininet.dll file provided with IE8 causes some kind of conflict with the customer view 4.5 (if using other SSL certificate that the server generated one) and will not allow the client to view 4.5 software to connect to your server security.  I reported this to VMware (2 weeks ago) so that they should be aware of the problem.

  If you remove your new SSL certificate and return to the one created by the display server then everything works perfectly again.  If you are using a machine with IE6 or IE7 XP remove IE8, it also works very well.  I tried taking the file wininet.dll from XP SP3 IE6 machine and restore this file after installing IE8 and everything seemed to work ok, but probably not the best solution.

  Bottom line is until VMware resolves the conflict with their client to view, you may not use any SSL certificate (other than that of the server is) If you are going to connect to windows machines running IE8 or newer.

• SonicWALL NSA 3600 6.2.2.1 - 14n and Sonicwall Mobile Connect for MAC DNS problems

  Hello

  I wonder if anyone has seen this problem. I just upgraded my NSA3600 to version 6.2.0 to 6.2.2.1 - 14n and now none of my MAC OS x clients that use the Sonicwal Mobile Connect application has no DNS. You can test by IP and use NSLOOKUP to find the records dns, but if you try to ping or access what either by its name it does not work.

  Everything worked perfectly before the upgrade to 6.2.2.1

  Thank you for this information, but it was not useful in this case because everything worked until I upgraded from 6.2.0 to 6.2.2.

  I just got got off the phone with Sonicwall support and there is a bug in the 6.2.2.1 - 14n and they gave me with a firmware fix. version 6.2.2.1 - 14n-HF156864-1n and everything is in working order.

• View 6 installing SSL wildcard

  Hello

  I have recently install a view connection server, see server security and a server of composer. Everything is in place and working, and now it's time to install my wild-card cert. I went to Symantec and purchased a wild-card cert for my domain and sent an email with a cert.cer and have access to a .p7b certificate, if I log on the portal of Symantec. I'm looking to replace my self certificates signed with the new wild-card cert, I came across a lot of different guides on how to do it for the previous versions to view, but not real good guides on how to install it for 6.

  I am looking to install the joker on all new servers view.

  Thanks for your time.

  Lance

  For 6, it is identical to 5.x for most...

  If you have already installed the connection/security server

  -Import the certificate into the store windows and then modify/edit the friendly name to: vdm

  -Restart the server, it should work as long as you change the friendly name

  For the composer, it is easier to have the imported certificate before installing. If you import the certificate after you run a few lines from a command prompt to bind the service to the newly imported certificate. You can find that in the documents listed above (which is a great resource-) or click here for a direct link.

  Note: This works for components of the view, however, if you use a virtual appliance of vcenter... Wildcard certificates are currently supported by the device.

• Cannot install on X 220 new RnR

  I'm trying to brand X 220 fresh installation. One of the things I noticed is that there is no installed RnR. I went to the Web site, started automatic detection, downloaded RnR 4.50 [ML]. But when I try to install it, there is an error:

  Error 25011. A file required to install the RnR environment could not be located. [Blah blah... blah]

  Somehow he can't find file required TVT, but now the idea what / which file.

  I've traveled to install dir, which is C:\swtools\readyapps\rnr\

  There are a few files, including samething called Z936ZAB1025US00. TVT. A txt file that I open and surprise - he also talks RnR 3.10 for Windows XP, even if I downloaded 4.50 for WIndows 7?

  Someone was able to install RnR on X 220 with Win7 x 64?

  Lenovo - could you please sort how this Readme very old of apprently has been included in the new installation package?

  Thank you very much

  Chris

  Hi, this problem appears on my device, idf, I download VERSION. Don't ask me why, I have no idea. Solution is to download the other language version. I use Czech version. Then, there is none that question.

• How to block Facebook for specific users by IP in NSA 4600 Sonicwall

  Hello

  I want to block facebook and youtube for some users in network using the IP of the user's computer or a MAC and allow other remaining users access facebook normally in Dell Sonicwall NSA 4600.

  Kindly guide me how it is possible in the firewall settings. Thank you

  Osama Aftab.

  You must configure the App control rules advance for block & FB access to specific users.

  Following article will give you heads upward.

  It is said in this article during the configurations block: activate & user/group of users Include: all THE (IE block FB for all users). You can use groups to exclude the user to authorize access to few IPs/users.

  

• Reference Dell sonicwall Email security 3300

  Hi all

  I need help to deploy my camera to 3300 of e-mail on the network security...

  first of all, I'll choose al to the server mode... and put it on the DMZ network... on the LAN will be my directory server and active Messaging... the bridge is two sonicwall NSA 5600 in HA.

  1. in order to inbound traffic, I'm going to on my policy of sonicwall for WAN DMZ

  2. from the DMZ to the local network, which is necessary for the network to the DMZ (e-mail Português) will communicate with LAN (Server Messaging (exchange) or AD)? What kind of strategy and ports need to be open

  your help will be appreciated :)

  Sorry for the late reply.

  There are many things to consider and the 3 KB here should cover all the questions you have.

  Each service that you mentioned has its own ports to be used.

  

  

  

• VPN from Site to Site of 2600 NSA does not work after upgrade to 6.2.0.1/6.2.2.0 6.2.0.0 SonicOS

  Site to Site VPN using policy based or VPN type road works very well in NSA 2600 with SonicOS Enhanced 6.2.0.0 - 20n. However, in order to correct the poodle attacks on SSLv3, we improve our SonicOS to 6.2.0.1 - 24n and this make the VPN does not. We tried SonicOS 6.2.2.0 - 7n with the same result. However, the VPN works remotely locally, but not the reverse, i.e. one meaning outside of the local network. Here are the details of the VPN deployment:

  Distance: NetScreen SSG-5 or GSU - 320 M

  Local: SonicWall NSA-2600

  Policy type: Tunnel Interface

  Auth. method: IKE using preshared Secret

  IKE Phase 1 proposal: Main Mode, group 2, 3DES, SHA1

  Proposal of IPSec Phase 2: ESP 3DES SHA1

  Please advice if it is linked to the SSLv3 disabled on Ipsec or any setting that we can make the VPN works on SonicOS after 6.2.0.1, again thank you!

  After reading the Release Notes for Early Release SonicOS 6.2.2.0 - 12n NSA-2600, we have solved the problem easily. Here's the important part:

  IMPORTANT: SonicOS 6.2.2.0 includes a design change added in recent versions for the treatment of the traffic via the Interfaces of the VPN Tunnel. By default, NAT policies are now applied to this traffic. In SonicOS 6.2.0.0 and SonicOS 6.1.1.9 and 6.1.1.x earlier, traffic on the Interfaces of the VPN Tunnel was exempt from policies NAT. Transition one of these earlier versions to 6.2.2.0 may require configuration changes.

  In fact, the truth is since 6.2.0.1, they already have policies NAT for the Interfaces of the VPN Tunnel. So the solution, regardless of usage 6.2.0.1 or 6.2.2.0, is just to write your policy NAT there is source and services NAT to network strategy involved VPN Tunnel Interface, that will be fine. To be simple, just

  Original of the CBC	Definition of the CBC	Original dest	Definition of dest	SVC Original	Definition of SVC
  Any	Source language	Remote VPN network	Source language	Any	Source language

• Flow of packets through NSA series...?

  I searched the internet for a document taking all the flow of packages through Sonicwall NSA from the moment of penetration to abandon the vehicle, I have not found... anybody has an idea

  I fear that such information may be confidential.

• VPN tunnel cascade w / SW NSA FWs

  

  Hello

  I have questions about VPN cascading between 3 firewall SonicWALL NSA. Let me explain my situation and what I want to achieve.

  As shown in the diagram above, I have 3 branches connected to the Internet, which advanced to the LAN is the NSA SW FW. There is a VPN tunnel between each site: Site_A Site_ B, Site_A Site_ C, Site_B Site_ C. The Internet of the Site A traffic is redirected to the Site B. This Site A Cross Site B to access the Internet and LAN B. Site A through C access LAN C Site.

  My question is: is it possible to remove the tunnel VPN Site_A-Site_C to and instead, through Site B to C LAN access? If so, how you can achieve this configuration?

  What worries me is the VPN tunnel options that allow you to redirect all Internet traffic or a specific destination of LAN through objects (screenshots from Site A) address:

  

  

  Without the redirection of Internet traffic, I thought about creating a group of addresses, including 2 B LAN and LAN C address objects. But I want to keep the Internet through Site B traffic redirection.

  What do you think?

  Thanks in advance for your help.

  Hello

  My comments below:

  If you route indeed all traffic from A to B, the following must fill.

  1. remove the tunnel A C

  Ok.

  2. site B will have A subnet that is defined as a local resource for C

  Do you mean this by local resource?

  

  3 C is going to have A subnet defined as remote resource

  Ok.

  If you route any traffic from A to B, the following must fill.

  First step would be to remove the tunnel VPN between A and C, but I guess that you have assumed that it was already done.

  1. define the C subnet as a remote resource on Site A

  Yes, like a remote network for the A - B VPN tunnel.

  2. tunnel of site B to A will need to subnet C defined as local resource

  Ok.

  3. tunnel of site B and C will need subnet defined as local resource

  Ok.

  4. the site will need to subnet C has defined as remote resource

  Yes.

  I'll do a test soon with 3 sites and see how it goes.