Install the driver OR DAQmx 9.7.0 Application Development Support

Hello

I'm currently trying to install Labview 2009 (my old copy was lost in case of overheating of the motherboard of my old computer). The installation went very well, I think, and I am able to create new projects etc.

When I downloaded the driver NOR-DAQmx 9.7 (full installer), I seem to be impossible to install several pieces of software - please see the attached file error. I'm not worried about the track of I/O OR 3.0.2, NI MAX 5.4 or NI Network Browser 5.4.0 because I think higher editions I have are backward compatible.

With the support for development applications OR DAQmx 9.7.0 however, impossible to install this because of incompatible products. Do you know what kind of products, this error refers to? I am at a loss, because I don't know what the symbol shown in the screenshot (I accessed this window with a custom train installation, but I can't change to a tick/cross).

Thank you in advance!

Carl

Hi James,

Thanks for responding. I managed to fix the error: I found that the version of NI-VISA installed on my computer was version 5.4, which is not compatible with LabView 2009. As soon as I uninstalled it and instead added version 5.3, I was able to install DAQmx ADE without problem.

Thank you once again!

Carl

Tags: NI Software

Similar Questions

  • Impossible to install the driver OR DAQmx on Win7 x 64

    I'm running Windows 7 x 64 and try to install the driver OR DAQmx 9.0.2.  However, the first time I did it, I got a partial installation.  Subsequent attempts to re - install give me the message that I need to first uninstall.  However, the program is not listed in install/uninstall programs.  I tried to run the cleaning for Vista, but it tells me that I have x 64 Windows so it does nothing.  So I'm stuck now impossible to uninstall what remaining NOR-DAQmx stuff is on my PC and cannot install again.  If you have advice on what to do, let me know.

    Thank you.

    Hey ness.

    Try to use MSI Blast to walk through the steps described in the pdf document.  Hope this helps!

  • Impossible to install the driver OR DAQmx on OpenSuse 11.1

    Hello

    I use NEITHER-PCI 6036E, NI PCI 6602 and card GPIB to run my experiences. Next to cards OR I only use the drivers: all programs are written in MFC. I would like to move my data acquisition to a Linux system (I am currently using OpenSuse 11.1 64-bit), however I have a problem installing NIDAQmx (8.0.1) for Linux. Any help would be appreciated. I have attached the log file of the installation failure and a file more indicated by the installer itself to help you diagnose the problem.

    Best regards

    Stojan

    PS: (if I have to change cards OR, which is not a problem, in fact we are
    using lots of other newer models. Also I can use some other Linux
    distribution of necessary)

    [email protected]

    (818)354-2480


  • RT system timeout when updating the driver NOR-DAQmx 8.9.5 to 9.0.2

    I installed LabVIEW 2009 on my host (Window XP) which has now NOR-DAQmx 9.0.2 installed.  My remote RT chassis has NEITHER-DAQmx 8.9.5 installed.   I need to have versions of NOR-DAQmx match on my host computer and remote systems.  I tried to install the driver OR DAQmx 9.0.2 my host by using the LabVIEW Real-time Software Wizard.  The Installer tries to restart the remote chassis on the installation mode but expires and returns the error Code 56.  How can I get my versions to match?

    Problem caused by the wrong installation order.  Necessary to install 9.0 RT first on target.  NOR-DAQmx has been updated at the same time.

  • I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

    I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

    Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

  • Installing the driver LAN WXP on Tecra A7

    Hello

    I do not have a source more to install WINDOS XP on my Tecra A7 (PTA71E). I reinstalled Windows XP but I'm stuck at the level of the LAN driver, I downloaded the driver on the toshiba site, but in files, only one file "PROUnstl.exe" is a possible, and is a desinsatllation file. How to install the driver from downloaded files
    Thank you

    List of files
    e1000msg.dll
    EtCo32.dll
    NicCo32.dll
    NicIn32.dll
    PROUnstl.exe
    TVERSION. XML
    e1e5032. DIN
    E1e5032.sys
    e1e5132.cat
    e1e5132. DIN
    e1e5132.inf
    E1e5132.sys
    iAMT.cat
    IAMT.din
    IAMT.inf
    IAMT2K.sys
    IAMT03.sys
    IAMTXP.sys
    iresol.cat
    iresol.inf
    verfile. ICT

    If you get this message, it means that the LAN driver is already installed.
    What is the status of the network (Ethernet controller) card in Device Manager?
    You should be able to find the network adapter in the network adapters box.

  • Pavilion dv3: cannot install the driver for graphics (Clubhouse dv3)

    Hello! I can't find and install the driver for graphics card. I see on the device manager that without "ATI radeon 5400 series.

    someone help me! Thank you

    Hi @QuanTrinh

    Welcome to the Forums of HP Support! I want you to meet some problems to find a graphics driver. I'll be happy to help you with that. Let me start by getting your product number , there are a number of dv3 models in this series. I also need to confirm that you are using Windows 7 32 - bit as well.

  • L750D-14R satellite - cannot install the driver for the TouchPad Win7

    Hello

    I have a problem with drivers for the touchpad. I downloaded v 15.2.11.1 Synaptics and me couldn't install them.
    "Installation of Synaptics (sync TP) ranked" I've got Windows 7 x 64. I've looked everywhere but I can't find any information on this problem.

    If someone knows what can go wrong and how can I fix this problem I would appriciate it.

    Never had any problems with installing the touchpad driver.
    I guess its not the touchpad driver problem but the problem with your system.

    First, you must uninstall the old driver for the touchpad.
    This can be done in the control panel-> programs & features

    Clean the system using some freeware like for instance CCLeaner tools.
    Restart the laptop between procedures.

    Then download driver Synaptics driver Toshiba UE page.
    Alternatively, you can try to install the driver for the Synaptics driver page: http://www.synaptics.com/resources/drivers
    In my case it worked and this driver has added some additional options that I would change in the Synaptics touchpad settings

  • Do not know how to install the driver LAN for Satellite A100-787

    The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

    I don't know how to install it... Any help?

    Hello

    I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

    In any case:
    -Create a new folder on your desktop
    -extract all downloaded files here
    -Open Device Manager and right-click on device unknown you want to install
    -choose Properties
    -find the Install driver button
    -Click on it and go to the new folder created
    -Follow the on-screen menu

    I hope that you can install to ti the pilot FTAs.

    Good bye

  • How to install the driver dv6 6165tx UEFI?

    Hello...

    Guys it's Marie Laure could you help me with my problem.

    I have a laptop hp pavilion dv6 6165 tx... so, during statup operating system is showing that the the system fan is not working properly - F(1B) and I want to install UEFI driver for this problem to be solved.

    IAM unable to install UEFI driver using my flash drive. During the installation, it's show to make a partion on the disk.

    So, how to make this partition and install the driver from the UEFI. If anyone can help, it will be a great relief for me.

    Sorry, but try to install UEFI utility or support environment will not solve your problem. Most likely, you will need to clean or replace the fan to make the error message disappears.

    Please send BRAVO

  • How to install the driver LAN for Satellite Pro A120

    In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
    The issue that there's no facility to do to complete the installation.

    And theres other question that I need the Ethernet controller

    My laptop was vista operating system installed, but I change and put Windows XP

    Please help me

    Hello

    LAN installation is very easy.
    First of all, you need the correct LAN driver.
    In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

    Once the LAN driver has been downloaded, you will need to decompress.
    Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

    Then finish the installation procedure.

  • Photosmart C410A: Cannot install the Driver

    OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
    Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
    Number of processors: 4
    RAM: Mb 5844
    Graphics card: AMD Radeon HD 6550D, 256 MB
    Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
    Motherboard: gateway, SX2370
    Antivirus: Norton Internet Security, updated and activated

    Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

    Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

    One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

    There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

    I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

    I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

    On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

    The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

    I appreciate everyone's help.

  • Installing the driver on the Qosmio G20

    I have a G20 machine (bought from the Japan) and I want to install my copy of XP pro.

    XP Setup works well until the end, then I start to install the driver and the software as suggested by Toshiba:

    acoustic silencer V1.00.005A
    help V1.02.00_TINASSIST_NUER20MA
    --> NOT INSTALLED atheros wlan 802.11ag / utility V3.1.2.19I123 g
    --> Bluetooth has NOT BEEN followed V2.0 (B20041111)
    Toshiba bluetooth stack V3.3.10.01 BUILD20041209
    Texas instruments pcixx21 flashmedia driver V1.0.2.1 INSTALLER BUGFIX
    Utility Intel chipset software installation V6.1.0.1008
    common modules V6.02.04
    ConfigFree V5.00.48
    controls V3.16.2400
    display the change of aircraft V1.6.0.0 utility
    NVIDIA geforce go 6600 display V6.14.10.7118 driver
    Hotkey to display V2.8.0.0 - 00 - XP
    fix for "cumulative security update for ie ' Q834707
    fix for "question in hyperterminal could allow code execution" KB873339
    fix for 'problem in the kernel windows and lsass' KB885835
    fix for "issue in wordpad could allow code execution" KB885836
    fix for 'windows firewall only my network (or subnet)' KB886185
    --> NOT INSTALLED hardware (dep) - active computer may quit unexpectedly after recovery from sleep mode or hibernation in windows xp service pack 2 Q889673
    SM214710AD2 Toshiba software modem
    V8.0.1.1 card WIRELESS Intel(r) pro/100 ve
    PC V3.1.0 diagnostic tool
    development of picture V2.7.0.2 utility
    V7.05.04 energy saving
    Toshiba V1.00.0013 for NUR20 raid driver
    utility RAID V1.2.0.25
    SD V2.0.2.1A memory card format
    secure module SD V1.0.2
    SoundMax integrated digital audio V5.12.01.5240U
    --> NOT INSTALLED sun java 2 runtime environment V1.5.0
    Touch and the launch of V1.2.7.0
    V6.0.304.6 Alps pointing device driver
    Press the start/stop utility V2.05.00
    utilities V4.20.26
    Virtual sound v1.00.05UPDATE
    V2.0.0.5 wireless keyboard shortcut
    wireless network card mini pci Atheros ar5001x V3.1.2.45
    Intel wireless b/g V9.0.1.9 lan driver
    utility V2.0.0.20C zoom

    In addition to the above, I have install the driver of TV tuner driver DVD RAM, the utility Maximizer and does not have the cause of the Atheros 802.11 driver, it seems, the machine has a network card Intel (is true?)

    But when I arrived at the end of this procedure the system starts and works fine the first time, but when I restart the machine that the hourglass will for centuries and I need to restart in safe mode using the Manager tasks.

    I have a feeling that the problem is related to the utility Configfree or be WIFI.

    I tried to uninstall the Configfree but the problem is still there!

    There, can someone help me? !!

    Hello

    You are right. If the device has an Intel WLan card you n t need to install Atheros utility and Atheros WLan driver. But you need the Intel WLan driver.
    I don t think that the problem is the utility Configfree. In my opinion you should check into the full background due to CPU performance process using Task Manager.

    Good bye

  • Problems installing the driver for the ToolsCD - Satellite P100-277

    Hello

    I got a Satellite P100-277, I have formatted and reinstalled windows xp on due to virus issues.

    Before I did it, I copied the folder "toolscd" of the HD intern on my external HD.
    Now, I reinstalled all the drivers, but with some drivers, there is no setup.exe and I do not understand how I can install these drivers then.

    For example, my audio driver, the 'Driver Sound' folder contains DLL, SYS, XML, CAT and INI files.
    But I don't know how I can install the driver.

    I hope you guys can help me out here, thx!

    > Now, I reinstalled all the drivers, but with some drivers, there is no setup.exe and I do not understand how I can install these drivers then.

    Some drivers must be installed in the Device Manager.
    Mark the device, push the button update driver and point to the files that are stored on your HARD drive

    Good bye

  • Satellite A100-599 - cannot install the driver for nVidia GeForce Go 7600 graphics card

    Greetings to all!

    Try to install the driver for Nvidia GeForce Go 7600 after reinstallation of the entire system, but without success. Only safe mode is available after this pilot plant, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result always :(

    Would be happy to be aware of how this problem... Thank you very much.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.

    Post edited by: Airtoground

    Hey,.

    > but without success.
    Does that mean exactly? You get an error during installation or what exactly is going on?

    > Only safe mode is available after the installation of this driver
    Why only safe mode is available? What happens if you start Windows in normal mode?

    And before you start a lengthy discussion: what laptop do you have?

    You may notice no problem if you install Windows recovery disk Toshiba?

Maybe you are looking for